When I completely re-did my hard drive, I split it into two partitions; a 50gb C: and a 30gb paritition. I don't know how to format or access my 30gb partition or turn it into an actual (letter):Do I need a special program?
View 13 RepliesI have Windows XP , total physical memory 2,058MB, available physical memory 1.26 gb. My hard drive is partitioned into Drive C, with 20GB capacity, 1.45 GB free space (7% ), and Drive D, with 213 GB capacity and 213 GB free space.
With only 7% free space in Drive C, I am restricted in doing some things such as defragmenting and using some programs. How do I take advantage of all this empty space on Drive D, which is just sitting there, to relieve the pressure on Drive C?
My sony vaio computer ( C drive ) is getting slow and has only 3.67 GB free space left out of 13.76 GB. The D drive has 60.5 GB of unused space. Is there a way to transfer some of the data on the c drive to the d drive and still have it available?
View 12 Replies View Related40GB HD installed recently. Unfortunately, the installer took the simplest option of making the whole new drive a single partition, instead of two of 8GB and 32GB, identical to the other drive. The organisation is therefore now as follows:That's obviously more secure than before, but I'd like to go further. I want to use DriveImage 2002 to copy the OS to F, so that in an emergency we could boot up to that instead of C. But DI won't allow that. Even though C contains only a TOTAL of about 7GB, and F is 8GB,it says there is insufficient space. It's been a long time since I last used DI, and I'm nervous about how best to proceed at minimum risk. Can I achieve my aim by using the facilities under Disk Operations to 'Redistribute free space among partitions'?
View 15 Replies View Relatedadded new hard drive my computer sees it but need to know how to partition it
or add them together to use the memory using xp
i have a primary hard drive working fine and added another hard drive 80gig maxtor as a slave and i'm using win xp pro.
i know there's computer management menu here in winxp, my question is:on how to format then partition my second hd,into 2(40 gig and 40 gig).basically i need the correct steps or commands.
I have an old customized computer from my grandma and when it boots up it asks me to select a operation system, there are two. How do I delete the operating system I don't want?I don't care if I have to reformat the whole hard drive... I would actually prefer to. And I have tried to delete one, but I cant seem to get rid of one of them.
View 4 Replies View RelatedI'm not sure this belongs in this section so if its out of place, plz move it.Ok, I just bought a HITACHI HDT725032VLA360 320GB HDD. My OS is currently installed on my 80GB WD800JB. I was thinking of reinstalling windows on the HITACHI but I'm unsure of how to partition it to ensure my performance is as good as possible. So what are your recommendations for the partition size for the OS on the HITACHI ?
View 7 Replies View RelatedI recently turned on my computer to find that one of my hard drives is not formated, but was full of data the day before.Is there a way to recover the partition and data without paying for data recovery services?
View 6 Replies View RelatedI am using xp home and have a 18.6 GB byte hard drive and will be reformatting soon and was wondering if I should partition it or not.What are the advantages?Is it ok to leave it as 1 as I have it now?
View 8 Replies View RelatedI have an xp partition that takes up about half of my hard drive.The rest of the hard drive is just un-partitioned space.What is the easiest and fastest way to resize the xp partition so that it takes up the entire hard drive?
View 6 Replies View RelatedI have partitioned my hard drive and loaded Windows XP in one partition. How do I set the default to load any programs into the second partition. My intent is to only have the operating system in the first partition.
View 3 Replies View RelatedI have a computer that Im trying to fix, the only way to input to the computer at this point and time is the hard drives. I have a working computer obviously. So could I take the hard drive out of the broken computer, give it two partitions, copy the windows install to one partition, start the the install in the broken computer from that partition and install that onto the second partition? Ive heard of this being down but I am no expert.
View 3 Replies View RelatedI copied my data files to my external Maxtor hard disk before I tried to reformat my internal hard drive and reload Win XP. However during my partition, I didn't realize I still had the external drive (160GB) plugged in and it showed up at the top of the list and the original internal (80GB) below it. So, I followed the instruction mistakenly and went through the process of deleting the partition(on the external hard drive) and tried to partition it into two drives. Then I got an error message as I continue to try to format the hard drive "Your computer's startup program cannot gain access to the disk containing the partition or free free space you choose . Set up cannot install Window XP on this hard disk." I stopped, reboot and tried to go through the delete partition several times with the same error message. After several attempts, I realized that the external hard drive was still plugged in.
So I unplugged the external hard drive and reboot to go through the process of reformatting and partition the internal hard drive into C drive and E drive and loaded Win XP. Now even though I plugged in the hard.After I installed the external hard drive's
software,driver and restarted the computer, I connected the external hard drive and don't see the drive in my computer. I could find it under Control Panel/System/Device Manager/Disk drives but it doesn't show up as an external hard drive under "My computer" with a drive letter. Under the disk management, I see the drive as Disk1 but it was unallocated. Did I lose all my data due to the delete of partition? Can I recover my data and drive ?
I'm having a hard time formating my system. I recently got virus that was so bad i couldn't access my desktop, so i am now formating my hard drive. I go through the process of a clean install and i make the partition I hit quick ntfs and it goes on fine until it restarts the computer. All it does is it either loads up on the cd or it hangs on a - mark on a black background, and later tells me non system disk or disk error replace and strike any key when ready. I'm wondering if jumper settings may have something to do with this or if the hard drive is screwed up.
View 1 Replies View RelatedMy computer came with a 80gb HD with windows xp pro.. I had took a 180gb hd from another comp. that was running windows xp home and connected it as a slave drive. A window popped warning me that vital info. would be deleted in order to format/ partition the second drive (180gb HD). Was this a mistake doing it in this manner? If not...How would I go about using the whole "180gb" and not just the 35gb it's only allowing me to use. And is there any way to move files so that they will be protected?
View 2 Replies View RelatedI have a 250GB Western Digital hard drive with a ~195GB partition formatted as FAT32. The partition is called "Documents" and has the letter C: assigned to it. The rest of the hard drive isn't formatted. The operating system (WinXP) is installed on a different hard drive.Since yesterday in My Computer or Explorer it's called "Local Disk C:" and whenever I click on it I get a box that says "The disk in drive C is not formatted. Do you want to format it now?". For two hours it came back and I backed up all the most important information but then the same problem came back again. I was able to see the contents of the partition through a few applications but not access it. My whole computer is working sluggish since this happened.
View 14 Replies View RelatedIt started when i use Partition Magic.
there was a notification error said that Partition Magic can't read my Hard Drive, because of 'drive wrong naming' (i forgot the exact word) then came up an option 'do you want to fix it?' YES/NO - I chose YES
but after that, I can't go into to windows again (Vista64) it stuck on loading process forever
- Hard Drive are detected on BIOS
- When I use another 'health' HD with this 'broken' one, then the 'health' HD won't boot either, but it will normally boot again if I unplugged the 'broken' HD
- When booting via Windows Installation Disk (tried to re-install Windows), it stuck again on windows loading
I understand the need for system restore to be enabled on the C: drive. But should it be enabled on the d: drive/recovery partition?
View 1 Replies View Relatedive got a hard drive that i could accsess all the time. Then one day no workie now when I try to acceses the drive I get a window that pops up and says Compaq Recovery partition warning. This area of your hard disk (or partition)contains files used for your system recovery. donot delete or alter these files. anychange to these files could delete or alter these files
View 1 Replies View RelatedEvery time I try to install Windows XP from the CD onto my friend's computer, I get to the blue screen where you're able to format/partition the hard drive and then his keyboard stops working. I don't know how to get around this because I can't continue the installation w/o the use of the keyboard. Unfortunatly, he has Windows ME on his computer right now so this issue needs to be resolved.
View 6 Replies View RelatedI would like to reallocate my 2 partitions on my HDD, because I am running low on one of them . Can this reallocation be done in the Disk Management portion of XP? If so, how do I do it My C partiton has 17g and my F has 37 g. I'd like to even them out.
View 2 Replies View RelatedA little over a year ago I purchased a used IBM Thinkpad laptop from ebay for my wife. It came with Windows 2000 Professional installed and everything worked fine. No CDs or floppies came with the computer. A couple of months later, it was stolen by one of her business associates. It eventually was recovered, but the thief had installed Windows XP along with the OS that was already installed. In trying to remove XP and return the machine to its original state, I somehow managed to eventually not be able to use either OS. As it stands now I have no OS and cannot even access my hard drive.When I boot from a floppy then try to change to C: drive, I get the error message: Invalid media type reading drive c: Abort, Retry, Fail?
View 7 Replies View RelatedI installed gentoo on my primary hard drive and have boot, swap and root partitions on it and they take up the whole drive. I want to install windows on the secondary hard disk but it is saying it needs a compatible partition on the primary drive but it is already full!
View 8 Replies View RelatedReinstalled xp on a computer for a friend. He had all his pics and music on second hard drive.It is a 120 gig IDE seagate.Main drive 250 gig WD sata drive.I unhooked second drive ,formatted and reinstalled xp on main hard drive.hooked up second drive and it is seen in bios and in disk management as a healthy drive but has no drive letter nor can I access it.Motherboard is a asus A8n sli deluxe.Second drive hooked up as master on second ide slot.When i try to assign it a drive letter in disk management that option is grayed out.When i tried to boot from second hard drive it contains no operating system but i saw norton go-back come up for a moment.After researching on net i think that is the problem.Hooked drive up to my computer and same thing.I know he had norton on main drive but dont know why he had it on secondary hard drive.
View 6 Replies View RelatedHi on my Win XP home system one of my hard drives has dissapeared from my computer' it is still listed in device manager.It is a device of 200 GB on a promise ide card - it apears as a sussi device I have another 200 Gb drive also on this card and that is still working at present.I have tryed to run Chkdsk on it but get "Cannot open volume for direct access."It was working okay this morning untill I ran O&o defrag on it, the PC just rebooted and the drive dissapeared.
View 3 Replies View RelatedI've had a new hard drive installed which is working without any problems. My old hard drive has been fitted into my new(er) computer but I can't access the files that I left on it except for the Windows system and program files. It has come up as Drive F and I've tried everything I know which isn't much, Recover my old documents.
View 3 Replies View RelatedWhen i restarted my Compaq PC (i know thats a problem right there ) I get an error saying unable to access the hard drive. I tried repairing with the windows XP Cd and it can't find the main partition. I cant install a fresh copy of XP/reformat it either. Is my HD dead? I checked the connections, seem okay.If i buy a drive and put in a firewire case, i can set that up as mymain drive and run XP off that right? (since my machine is severalyears old, notworth upgrading.
View 12 Replies View RelatedI want to know if I can make a specific hard drive on my PC available through the net so my daughter in college can have access to that particular hard drive.
View 11 Replies View RelatedI made a mistake when installing fresh copy of win HP. I had a new HD and i've installed windows on it. But the old HD that was on my PC was found during the installation and the system found it like partition C:. I've made a mistake and made that partition unpartitioned space and than again i have made it partition. The disk is not yet formated but off course, i cant access the data that is on the disk.how can I save the data that is on my disk.
View 6 Replies View RelatedRecently I had some problems with my PC that made me want to run Norton Disk Doctor to analyze my hard drive. When I attempt to do so, I get an error message that says "The operating system, or another process, currently has exclusive access to the drive, or some of its files." Does anyone know how to determine what has exclusive access to the drive and how to make it non-exclusive?
View 11 Replies View Related