Slow Loading - Partition Magic Can't Read My Hard Drive
Jul 11, 2009
It started when i use Partition Magic.
there was a notification error said that Partition Magic can't read my Hard Drive, because of 'drive wrong naming' (i forgot the exact word) then came up an option 'do you want to fix it?' YES/NO - I chose YES
but after that, I can't go into to windows again (Vista64) it stuck on loading process forever
- Hard Drive are detected on BIOS
- When I use another 'health' HD with this 'broken' one, then the 'health' HD won't boot either, but it will normally boot again if I unplugged the 'broken' HD
- When booting via Windows Installation Disk (tried to re-install Windows), it stuck again on windows loading
View 1 Replies
ADVERTISEMENT
Apr 5, 2008
I was partitioning my C drive of windows using partition magic so that to install Linux. my laptop(hp pavilion dv5000) had only 1 partition so I tried this stupid thing. Unfortunately power went off during partition, and now I m not able to install windows XP neither from recovery disc or from regular xp cd. Some linux (suse, fedora) and windows vista are installing fine. But I need XP disparately. What to do.
View 14 Replies
View Related
Jul 16, 2008
I got a new motherboard installed because my old one fried itself and the pc was reformatted and windows was reinstalled. Since then, it was working fine. The start-up time had also lowered considerably and it was working perfectly for once.One thing that's been happening for a while, my computer started taking longer to start-up. I figured it was just all the programs etc I have installed. Then, I have this one external drive that I got connected internally. There were times where it wouldn't recognize this drive; it wouldn't show up on My Computer. Otherwise, it was perfectly fine. one of my most important drives (E) has been missing for the last 2 days. it hasn't shown up even once and i'm really worried i've lost data and need to recover it.
View 1 Replies
View Related
Jul 25, 2005
My existing C: drive. First I was getting the "Error 983" error. Then I un-installed SP2 which was causing a gang of problems, freezing programs for a couple mins mostly. After I got it uninstalled I did a disk defrag, then a chkdsk /f. Now I have partitioned the drive using PM8 again and this time after the reboot it is telling me it is completed but once Windows XP reboots there is no new partition.
Im trying to install Suse Linux 9.0. But I really want to have 2 new partitions, one for Suse, and the other as a back up.
View 5 Replies
View Related
May 1, 2005
I had perfectly working PC with XP Pro installed on a 160Gb Maxtor HDD.For no reason I error checked the hard drive, which the system did after rebooting, at the end of the test the system rebooted and announced that there was a error on the boot and boot.ini.Useing XP Emergency (on disk) I tried fixmbr which did nothing then I tried Fixboot. XP found the drive identified it as FAT and said that it was successfully fixed.The drive was FAT and is now unusable.Partition Magic sees it as a FAT drive as does XP when I switched the HDD into another machine.
View 4 Replies
View Related
Sep 8, 2005
I've just resized a partition on my main physical drive, and the OS sees the adjacent partition as unfromatted.
I'm using Partition magic pro 7 and WinXp pro.
The partition I resized is the primary OS partition which is formatted as NTFS, the adjacent partition is FAT32. How can I get XP to recognise the FAT32 partition again?
View 2 Replies
View Related
Oct 22, 2007
I was just using my PC this weekend and i tried to combine the 3 partitions in my master/primary hdd with my parition magic 8.0. After partition magic was done on its job, pc rebooted and i cant load xp anymore. have tried removing small battery, reinstalling with recovery CD and still wont load xp. i was getting diffrent things on the screen. first was that my pc hung on me when "booting to CD:" came, did something and next i got was mbr error 2, then i got disk boot failure after playing around with the PC.by the way my pc had acronis too. i figure it has something to do with it. i tried my recovery cd 3 tiems and after finishing the reinstall i still cant boot. i tried to use an xp boot disk and found that all my files are still intact and havent been reformatted.
View 6 Replies
View Related
Sep 25, 2005
does anyone know what will solve this annoying error that frequently disrupts the bootup of windows XP PRo? You can run Chkdsk from savemode and this solves temporarely the problem but time and again after shutdown this error reappears. Somewhere during shutdown it seems that the filetable(MTR?)is corrupted Partition Improperly Unmounted Error 1516 is the message.
View 7 Replies
View Related
Dec 25, 2004
I bought a Seagate 169GB Barracuda Hard drive and set about partitioning it with Partition Magic. Initially I was being advised via phone by a friend in a neighbouring country. I put the Seagate as the Master and my previous Master as the slave. (a Maxtor 30 gb hard drive partitioned into 3. IE ..2 x 4GB and one 22gb partitions.......these were configured C (4gb) had the OS Win 98 SE on it ...E (4GB) was a back up? and F (22gb) was for video files mp3,s etc) I put Partition Magic on C and proceeded to follow directions. To cut a long story short. I got the Seagate successfully formatted.
BUT
I have done something wrong. What happened was the E and F partitions on the Maxtor combined and showed up as unallocated space on Partition magic and Free Space on XP,s Disk management...Naturally I removed it till I got some advice on what to do.... I have since tryed three disk recovery programs and had a certain amount of success with one program .....I note however that from memory all the recovered files /folders are from the 22gb partition and none from the 4gb partition that combined with it.... I still have some options to try but as a beginner I thought it best to see if anybody in the forum with experience in this field could give me their advice so that I can hopefully recover as much as I can..
View 14 Replies
View Related
Jun 20, 2008
A friend of mine would like me to take a look at his computer for him later. He said he is getting an error message when he starts it up that says Failure to read internal drive Press F1 to reboot. He doesn't have the exact message but that's about it. Does this mean the hard drive is bad, or is there hope that I can fix this?
View 3 Replies
View Related
Feb 2, 2006
Cannot get Partition Magic * to installon my Windows XP computer.
View 12 Replies
View Related
Aug 22, 2005
I installed PM 8.05 and used it to resize C drive (WinXP OS is there).I used the auto function to take a 1Gig amount each from drives D, E and F (about 25+ plus Gig free on each of these on a Seagate 120Gig HDD) to add to the 1Gig of free space on the C drive. The PM process seemed to go OK (went into DOS(?) and went through 7 steps to resize, etc) as there were no error messages. It said at the start it was going to do FAT 32 which is what I had the drives set up as. At the end PM said it was going to reboot and then the fan was hit. The boot up stopped at the "DMI Verifying Pool Data" message and the little line cursor just sat there blinking.
View 12 Replies
View Related
Aug 18, 2006
i have a acer t135 sempy 3300 w/ xp home,Ive tried to convert partition to ntfs its set as this 72.6 fat 32 on (c: ---and 73.4 ntfs on (d: i had a copy of partition magic from a guy at work but when i tried it i wiped hd and had to use acer restore discs
View 6 Replies
View Related
Feb 22, 2006
i have a major problem. I used Partition Magic 8 last night and the program crashed halfwayn through. Now i am getting a blue screen on startup probably because of damaged sectors. I am unable to start xp to run a chkdsk or to install any partition doctor type tools I then decided to re-install my Xp. But during the start stages before installation an error comes up saying there is no hardrive on your computer. please make sure it is switched on or presesnt(or something like that)
View 1 Replies
View Related
Sep 9, 2007
Windows XP .I am trying desparately to enlarge my c drive, which is partitioned from a large drive also containing f (programs) and g (data) drives. I need to enlarge the c drive to allow proper cmptr operation.i used Partition magic , which seemed to work up until the point where it rebooted and gave me error 58 "unable to write to the boot sector. Virus protection software may be running. "I have disabled Norton Anti virus, and Spyware Dr (complete shutdown). Still no success.How do i disable virus protection in the boot.
View 6 Replies
View Related
Dec 21, 2004
if you have a really big hard drive like 200 or more, don't you need to split it in half, so windows think it's actully two hard drive, but really it's one. just so windows can read the hard drive.how much is the limit till you have to spilt it in half?
View 3 Replies
View Related
Jan 5, 2006
Every time I turn my computer on I am getting the following error message;
"Read Failure on internal hard drive. No bootable devices -- Strike F1 to retry boot F2 for setup utlility"
and every time I attempt to retry boot by entering F1 I do am immediately brought back to the same message. Can someone please help as I am in desperate need to recover company files located on the hard drive.
View 10 Replies
View Related
Apr 4, 2008
I trying to help a friend with their computer; Dell Dimension 4700, XP Pro, and getting the error message: A DISK READ ERROR OCCURRED. PRESS CTRL & ALT & DEL Does this mean the hard drive is bad?
View 14 Replies
View Related
Dec 12, 2007
My spare hard drive I believe has been acting up. Now suddenly the drive is there but I can't view anything on it. Did diagnostics and it checks out, spins up, but somehow the file directory got corrupt? it's a WD 120. Would using the Recovery console be the best option to repair that file system? I am unable to do a scandisk/Chkdsk from DOS or within XP. I have some video files I'd hate to loose to reformating that drive to repair it.
View 7 Replies
View Related
Jun 1, 2006
i was attempting to resize my HD using partition magic i did not backup prior During the process my computer lost power. Upon rebooting i receive the following blue screen error message: a problem has been detected and windows has been shut down to prevent damage to our computer if this is the first time you've seen this stop error screen, restart your computer. if this screen appears again, follow these steps:
disable or uninstall any anti-virus, disk defragmentatio or backu utils. check your HD config, and check for any updated drivers run CHKDSK /F to check for HD corruption, and then restart your computer.
View 4 Replies
View Related
Jun 2, 2006
Recently i was attempting to resize my HD using partition magic(i did not backup prior During the process my computer lost power. Upon rebooting i receive the following blue screen error message: a problem has been detected and windows has been shut down to prevent damage to our computer if this is the first time you've seen this stop error screen, restart your computer. if this screen appears again, follow these steps:
disable or uninstall any anti-virus, disk defragmentatio or backu utils. check your HD config, and check for any updated drivers run CHKDSK /F to check for HD corruption, and then restart your computer.
View 4 Replies
View Related
Apr 7, 2010
I have spent a long time struggling with Windows over different errors, which all lead back to page file problems, which ultimately all led back to my RAM. I found this out after XP's system file went irreparably corrupt, when my hackintosh (installed on a different hard drive) started experiencing the same problems.Bad RAM has been removed, and I'm trying to reinstall XP. I formatted the drive using OSX's Disk Utility program, wrote zeros to the entire surface, and partitioned it in FAT32 (Disk Utility can not format to NTSC).When I use my CD to reinstall Windows, it does not read the full drive. It instead offers to install XP on a 130gb drive where my 640gb drive is. If I follow it through, it installs just fine, but it formats my 640gb drive to only have one usable NTSC partition of 130gb.The last time I attempted this, I removed every drive and storage device from my computer except for the 640gb drive and the same thing still happened.
View 5 Replies
View Related
Sep 6, 2008
A friend copied a bunch of music to my USB Western Digital HD. When I turn the drive on it goes into autoplay mode scanning the entire drive for content. Once done it will work fine the first time I try to access it, but then it loses communication and won't recognize the drive. I'm running XP Pro.
View 6 Replies
View Related
Oct 19, 2006
I am having an issue with a Maxtor Model Number 92739U6 hard drive. I have just finished formatting and installing windows xp home edition. Everything was going ok until I restarted the computer. First right after I restarted the computer I got an error message A Disk Read Error Occurred. Press CTRL+ALT+Del. I was unsure what caused this error message so I started to research this issue on Maxtor?s website and they advised me to use fdisk /mbr to repair the error. I did that and restarted the computer. Same Error?. The thing I can?t figure out is why I am able to boot right to windows using a boot disk.
View 8 Replies
View Related
Jul 25, 2007
I got a new HD (WD) and formatted it successfully and then loaded Win XP to it successfully or so I thought. The desktop can't recogize my broadband connection (connected straight from the wall to the pc). Why is this?Also, the display settings are so whacked that I can't get a smaller resolution. I assume this has to do with my video drivers, but of course, I can't download anything without the Internet.
View 8 Replies
View Related
Feb 20, 2008
I have Windows XP , total physical memory 2,058MB, available physical memory 1.26 gb. My hard drive is partitioned into Drive C, with 20GB capacity, 1.45 GB free space (7% ), and Drive D, with 213 GB capacity and 213 GB free space.
With only 7% free space in Drive C, I am restricted in doing some things such as defragmenting and using some programs. How do I take advantage of all this empty space on Drive D, which is just sitting there, to relieve the pressure on Drive C?
View 2 Replies
View Related
Aug 23, 2006
My sony vaio computer ( C drive ) is getting slow and has only 3.67 GB free space left out of 13.76 GB. The D drive has 60.5 GB of unused space. Is there a way to transfer some of the data on the c drive to the d drive and still have it available?
View 12 Replies
View Related
Sep 2, 2005
40GB HD installed recently. Unfortunately, the installer took the simplest option of making the whole new drive a single partition, instead of two of 8GB and 32GB, identical to the other drive. The organisation is therefore now as follows:That's obviously more secure than before, but I'd like to go further. I want to use DriveImage 2002 to copy the OS to F, so that in an emergency we could boot up to that instead of C. But DI won't allow that. Even though C contains only a TOTAL of about 7GB, and F is 8GB,it says there is insufficient space. It's been a long time since I last used DI, and I'm nervous about how best to proceed at minimum risk. Can I achieve my aim by using the facilities under Disk Operations to 'Redistribute free space among partitions'?
View 15 Replies
View Related
Aug 24, 2005
added new hard drive my computer sees it but need to know how to partition it
or add them together to use the memory using xp
View 3 Replies
View Related
Jul 16, 2005
i have a primary hard drive working fine and added another hard drive 80gig maxtor as a slave and i'm using win xp pro.
i know there's computer management menu here in winxp, my question is:on how to format then partition my second hd,into 2(40 gig and 40 gig).basically i need the correct steps or commands.
View 8 Replies
View Related
Dec 29, 2005
When I completely re-did my hard drive, I split it into two partitions; a 50gb C: and a 30gb paritition. I don't know how to format or access my 30gb partition or turn it into an actual (letter):Do I need a special program?
View 13 Replies
View Related
