Partition Magic 8 Hardisk - Blue Screen On Startup
Feb 22, 2006
i have a major problem. I used Partition Magic 8 last night and the program crashed halfwayn through. Now i am getting a blue screen on startup probably because of damaged sectors. I am unable to start xp to run a chkdsk or to install any partition doctor type tools I then decided to re-install my Xp. But during the start stages before installation an error comes up saying there is no hardrive on your computer. please make sure it is switched on or presesnt(or something like that)
View 1 Replies
ADVERTISEMENT
Jun 1, 2006
i was attempting to resize my HD using partition magic i did not backup prior During the process my computer lost power. Upon rebooting i receive the following blue screen error message: a problem has been detected and windows has been shut down to prevent damage to our computer if this is the first time you've seen this stop error screen, restart your computer. if this screen appears again, follow these steps:
disable or uninstall any anti-virus, disk defragmentatio or backu utils. check your HD config, and check for any updated drivers run CHKDSK /F to check for HD corruption, and then restart your computer.
View 4 Replies
View Related
Jun 2, 2006
Recently i was attempting to resize my HD using partition magic(i did not backup prior During the process my computer lost power. Upon rebooting i receive the following blue screen error message: a problem has been detected and windows has been shut down to prevent damage to our computer if this is the first time you've seen this stop error screen, restart your computer. if this screen appears again, follow these steps:
disable or uninstall any anti-virus, disk defragmentatio or backu utils. check your HD config, and check for any updated drivers run CHKDSK /F to check for HD corruption, and then restart your computer.
View 4 Replies
View Related
Mar 29, 2009
i have 80gb usb hardisk, my problem is when connect in my laptop which have window xp-3, it des not access, kindly suggest....
View 1 Replies
View Related
Jul 25, 2005
My existing C: drive. First I was getting the "Error 983" error. Then I un-installed SP2 which was causing a gang of problems, freezing programs for a couple mins mostly. After I got it uninstalled I did a disk defrag, then a chkdsk /f. Now I have partitioned the drive using PM8 again and this time after the reboot it is telling me it is completed but once Windows XP reboots there is no new partition.
Im trying to install Suse Linux 9.0. But I really want to have 2 new partitions, one for Suse, and the other as a back up.
View 5 Replies
View Related
May 1, 2005
I had perfectly working PC with XP Pro installed on a 160Gb Maxtor HDD.For no reason I error checked the hard drive, which the system did after rebooting, at the end of the test the system rebooted and announced that there was a error on the boot and boot.ini.Useing XP Emergency (on disk) I tried fixmbr which did nothing then I tried Fixboot. XP found the drive identified it as FAT and said that it was successfully fixed.The drive was FAT and is now unusable.Partition Magic sees it as a FAT drive as does XP when I switched the HDD into another machine.
View 4 Replies
View Related
Sep 8, 2005
I've just resized a partition on my main physical drive, and the OS sees the adjacent partition as unfromatted.
I'm using Partition magic pro 7 and WinXp pro.
The partition I resized is the primary OS partition which is formatted as NTFS, the adjacent partition is FAT32. How can I get XP to recognise the FAT32 partition again?
View 2 Replies
View Related
Oct 22, 2007
I was just using my PC this weekend and i tried to combine the 3 partitions in my master/primary hdd with my parition magic 8.0. After partition magic was done on its job, pc rebooted and i cant load xp anymore. have tried removing small battery, reinstalling with recovery CD and still wont load xp. i was getting diffrent things on the screen. first was that my pc hung on me when "booting to CD:" came, did something and next i got was mbr error 2, then i got disk boot failure after playing around with the PC.by the way my pc had acronis too. i figure it has something to do with it. i tried my recovery cd 3 tiems and after finishing the reinstall i still cant boot. i tried to use an xp boot disk and found that all my files are still intact and havent been reformatted.
View 6 Replies
View Related
Sep 25, 2005
does anyone know what will solve this annoying error that frequently disrupts the bootup of windows XP PRo? You can run Chkdsk from savemode and this solves temporarely the problem but time and again after shutdown this error reappears. Somewhere during shutdown it seems that the filetable(MTR?)is corrupted Partition Improperly Unmounted Error 1516 is the message.
View 7 Replies
View Related
Dec 25, 2004
I bought a Seagate 169GB Barracuda Hard drive and set about partitioning it with Partition Magic. Initially I was being advised via phone by a friend in a neighbouring country. I put the Seagate as the Master and my previous Master as the slave. (a Maxtor 30 gb hard drive partitioned into 3. IE ..2 x 4GB and one 22gb partitions.......these were configured C (4gb) had the OS Win 98 SE on it ...E (4GB) was a back up? and F (22gb) was for video files mp3,s etc) I put Partition Magic on C and proceeded to follow directions. To cut a long story short. I got the Seagate successfully formatted.
BUT
I have done something wrong. What happened was the E and F partitions on the Maxtor combined and showed up as unallocated space on Partition magic and Free Space on XP,s Disk management...Naturally I removed it till I got some advice on what to do.... I have since tryed three disk recovery programs and had a certain amount of success with one program .....I note however that from memory all the recovered files /folders are from the 22gb partition and none from the 4gb partition that combined with it.... I still have some options to try but as a beginner I thought it best to see if anybody in the forum with experience in this field could give me their advice so that I can hopefully recover as much as I can..
View 14 Replies
View Related
Feb 2, 2006
Cannot get Partition Magic * to installon my Windows XP computer.
View 12 Replies
View Related
Aug 22, 2005
I installed PM 8.05 and used it to resize C drive (WinXP OS is there).I used the auto function to take a 1Gig amount each from drives D, E and F (about 25+ plus Gig free on each of these on a Seagate 120Gig HDD) to add to the 1Gig of free space on the C drive. The PM process seemed to go OK (went into DOS(?) and went through 7 steps to resize, etc) as there were no error messages. It said at the start it was going to do FAT 32 which is what I had the drives set up as. At the end PM said it was going to reboot and then the fan was hit. The boot up stopped at the "DMI Verifying Pool Data" message and the little line cursor just sat there blinking.
View 12 Replies
View Related
Apr 5, 2008
I was partitioning my C drive of windows using partition magic so that to install Linux. my laptop(hp pavilion dv5000) had only 1 partition so I tried this stupid thing. Unfortunately power went off during partition, and now I m not able to install windows XP neither from recovery disc or from regular xp cd. Some linux (suse, fedora) and windows vista are installing fine. But I need XP disparately. What to do.
View 14 Replies
View Related
Aug 18, 2006
i have a acer t135 sempy 3300 w/ xp home,Ive tried to convert partition to ntfs its set as this 72.6 fat 32 on (c: ---and 73.4 ntfs on (d: i had a copy of partition magic from a guy at work but when i tried it i wiped hd and had to use acer restore discs
View 6 Replies
View Related
Sep 9, 2007
Windows XP .I am trying desparately to enlarge my c drive, which is partitioned from a large drive also containing f (programs) and g (data) drives. I need to enlarge the c drive to allow proper cmptr operation.i used Partition magic , which seemed to work up until the point where it rebooted and gave me error 58 "unable to write to the boot sector. Virus protection software may be running. "I have disabled Norton Anti virus, and Spyware Dr (complete shutdown). Still no success.How do i disable virus protection in the boot.
View 6 Replies
View Related
Jul 11, 2009
It started when i use Partition Magic.
there was a notification error said that Partition Magic can't read my Hard Drive, because of 'drive wrong naming' (i forgot the exact word) then came up an option 'do you want to fix it?' YES/NO - I chose YES
but after that, I can't go into to windows again (Vista64) it stuck on loading process forever
- Hard Drive are detected on BIOS
- When I use another 'health' HD with this 'broken' one, then the 'health' HD won't boot either, but it will normally boot again if I unplugged the 'broken' HD
- When booting via Windows Installation Disk (tried to re-install Windows), it stuck again on windows loading
View 1 Replies
View Related
Jul 17, 2005
when I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : windowssystem32configsystem."
You can attempt to repair this file by putting the winxp cd in etc...
Now when i turn on my computer there is just a black screen showing, with nothing at all on it.
Any ideas?
View 3 Replies
View Related
Jul 24, 2005
I'm not really sure what I did to make it happen, but I was just chatting with some people on AOL instant messenger when my computer changed to a blue screen. The message was something along the lines of. A problem has been detected and windows has shut down to prevent damage to your computer. Then it gave me some technical information (which im assuming is what's causing these problems) and it was like 0x346432HF, 0x3456DFGH (those aren't the actual values, it was just 0x[8 characters].It also said to restart my computer and run CHDSK /F to check for any hard drive problems.So I restart my computer, and everything is fine until I reach the login screen. I click on my user account and then type in my password, and halfway through that sound you hear when your computer is starting up, I get the same blue screen again. Next, I restart my computer and try to start it from the last time it worked. Blue screen during start up again.I try starting it in safe mode, blue screen during start up.I was hoping someone here would be able to help me so I won't have to resort to reformatting my computer. I really don't want to reformat my computer because I have some old games I still play like Starcraft, but I lost the cd key to it ages ago.
View 11 Replies
View Related
Feb 24, 2005
Running 1.8 gig win xp My computer is starting to show a blue screen after the initial startup.So far it has booted completly after about 1 minute, but I am getting worried.No problems during the day / only after shutdown and restart in morning.The computer is about 3 years old.Can I do any tests to determine whethe the hard drive is failing?
View 14 Replies
View Related
Jun 21, 2005
im hoping someone can help me out of a jam. my dell laptop has been working very well until now....when it refuses to load windows, instead stalling with a blue screen on every attempt to load. the bluscreen tells me that windows was unable to load, and says "unmountable_boot_volume." under the heading "technical information". i have no idea whether that is relevant but included it in case it is.i know i was short on memory, and im wondering whether windows is refusing to load because of that.or whether a virus has taken over me computer. ive tried loading windows in every safe mode, in last known good configuration.is there a hotkey to load the DOS prompt before windows, to try and edit the windows registry from there? is there anything i can do short of reformating and reinstalling windows? if anyone knows how to deal with this.
View 3 Replies
View Related
Aug 28, 2007
I have a compaq laptop and until recently it was ok, now when I turn it on it starts up ok and then a blue screen pops up stating that a problem has been detected and windows has been shut down to prevent damage.
View 2 Replies
View Related
Sep 20, 2005
This morning switched on pc. started to boot then switched itself off leaving me with a blue screen saying it had switched off to save the computer from damage.
View 1 Replies
View Related
Mar 2, 2005
I have recently been getting a blue screen when i start up my computer. The error message on the blue screen says "page fault in non paged area". It then asks if I want to start windows normally, or in safe mode or other options. I start it normally cause I don't know what to do to fix it. I haven't added new software, so I don't know what happened.
View 1 Replies
View Related
Dec 22, 2005
Whenever i startup my computer and i see the black windows screen and you can see it loading, after 10 seconds this BLUE screen comes up. I didn't install any new hardware. I have those 6 boot disks, but it says the second disk has a problem...this is the message, File tkrnlmp.exe could not be loaded. The error code is 7. Setup cannot continue. Press any key to exit.
View 4 Replies
View Related
Sep 16, 2005
when i open Partition Magic 8 i see my Maxtor 6Y120P0 drive in a yellow color and the file system marked as "other": but my Windows 2000 Disk Management shows healty:
under windows i can read and write to the partition, so what is wrong? what does Partition Magic wants?
View 1 Replies
View Related
Aug 30, 2006
Yesterday I tried to turn on my laptop and it jumped to a screen saying that windows was not shut down properly last time (Which is incorrect, it was shutdown properly and there hasn't been any abnormal activity or malfunctions with the computer. No programs were installed recently and only) it then gives me the choices of starting in safemode and such. Attempting to start up in any mode the computer goes through the beginnings of starting up.
View 5 Replies
View Related
Apr 4, 2007
Stop:C0000218 {Registry File failure} The registry cannot load the hive (file) : or its log or alternate. It is corrupt, absent or not writable. Beginning dump of physical memory. Physical memory dump complete. Contact your system administrator or technical support group for further assistance. I found this message this morning after a bad storm last night. I tried to restart in safe mode and last known good config but received the same message with one exception. Now it was the registry cannot load the hife (file)
View 14 Replies
View Related
Apr 5, 2007
Last weekend I had a problem where every time I started my computer I received a blue screen of death informing me that my computer had improper Boot Volume or some nonsense like that. Using instructions I found via Google (some from this site!) I restored my boot volume using the windows cd.Tonight yet again my computer has to decided to mess up with a blue screen after startup. this time I get further into the start process (but not to windows) than I did last weekend, but I don't have time to read what the blue screen says before it makes my computer restart. last weekend it would just hang on the blue screen til I turned it off but this time I get a brief flash of blue and then it's restarted. It also doesn't look like there's as much text on the blue screen as before.but it may be the brief period I get to see it (or lack thereof).I do feel as though the two instances are related as they seemed to start the same way. I went to restart my computer using the restart command, it would not restart, one of my open windows froze and would not turn off in task manager, so I turned it off manually. yes, I know that's not good at all, but I've turned it off before without it completely crapping out on me, it seems to only have this effect when it won't shut off when I want it to.
Despite the differences in the behavior of the startup error and the blue screens do you think it is the same problem? Should I try the boot volume restore thing again or could it be something else? I also have to note that I can't start in safe mode either.I am NOT in any way computer literate.I am completely technologically challenged so I hope you have some help and I'm sorry for taking up your time.
View 2 Replies
View Related
Mar 9, 2010
I justr turned on my pc this morning and after being asked whether to boot from last known good or from normal, the screen goes blue/black and just stays like that and nothing happens hope its nothing serious. I don't have a backup cd.
View 1 Replies
View Related
Jan 2, 2010
Was getting multiple blue screens on an old install of XP so I decided it was time to reformat and reinstall windows XP.) XP installed properly. Began updating drivers, adding necessary software, etc Everything ran smoothly until I unplugged the printer and then the BSOD appeared and would continue to appear whenever I tried to boot. It was the strangest thing.I unplugged all peripherals from the computer this time and began to install clean. XP installed properly. Began updating drivers, installing Windows updates. After windows updates installed and I restarted, the BSOD began appearing on every startup up after the Windows splash screen.
View 1 Replies
View Related
Jan 9, 2009
Hello there, i turn the pc on, i log on and when windows loads up it just goes to a blue screen and then shuts down.
View 8 Replies
View Related
