does anyone know what will solve this annoying error that frequently disrupts the bootup of windows XP PRo? You can run Chkdsk from savemode and this solves temporarely the problem but time and again after shutdown this error reappears. Somewhere during shutdown it seems that the filetable(MTR?)is corrupted Partition Improperly Unmounted Error 1516 is the message.
View 7 RepliesWindows XP .I am trying desparately to enlarge my c drive, which is partitioned from a large drive also containing f (programs) and g (data) drives. I need to enlarge the c drive to allow proper cmptr operation.i used Partition magic , which seemed to work up until the point where it rebooted and gave me error 58 "unable to write to the boot sector. Virus protection software may be running. "I have disabled Norton Anti virus, and Spyware Dr (complete shutdown). Still no success.How do i disable virus protection in the boot.
View 6 Replies View RelatedMy existing C: drive. First I was getting the "Error 983" error. Then I un-installed SP2 which was causing a gang of problems, freezing programs for a couple mins mostly. After I got it uninstalled I did a disk defrag, then a chkdsk /f. Now I have partitioned the drive using PM8 again and this time after the reboot it is telling me it is completed but once Windows XP reboots there is no new partition.
Im trying to install Suse Linux 9.0. But I really want to have 2 new partitions, one for Suse, and the other as a back up.
I had perfectly working PC with XP Pro installed on a 160Gb Maxtor HDD.For no reason I error checked the hard drive, which the system did after rebooting, at the end of the test the system rebooted and announced that there was a error on the boot and boot.ini.Useing XP Emergency (on disk) I tried fixmbr which did nothing then I tried Fixboot. XP found the drive identified it as FAT and said that it was successfully fixed.The drive was FAT and is now unusable.Partition Magic sees it as a FAT drive as does XP when I switched the HDD into another machine.
View 4 Replies View RelatedI've just resized a partition on my main physical drive, and the OS sees the adjacent partition as unfromatted.
I'm using Partition magic pro 7 and WinXp pro.
The partition I resized is the primary OS partition which is formatted as NTFS, the adjacent partition is FAT32. How can I get XP to recognise the FAT32 partition again?
I was just using my PC this weekend and i tried to combine the 3 partitions in my master/primary hdd with my parition magic 8.0. After partition magic was done on its job, pc rebooted and i cant load xp anymore. have tried removing small battery, reinstalling with recovery CD and still wont load xp. i was getting diffrent things on the screen. first was that my pc hung on me when "booting to CD:" came, did something and next i got was mbr error 2, then i got disk boot failure after playing around with the PC.by the way my pc had acronis too. i figure it has something to do with it. i tried my recovery cd 3 tiems and after finishing the reinstall i still cant boot. i tried to use an xp boot disk and found that all my files are still intact and havent been reformatted.
View 6 Replies View RelatedI bought a Seagate 169GB Barracuda Hard drive and set about partitioning it with Partition Magic. Initially I was being advised via phone by a friend in a neighbouring country. I put the Seagate as the Master and my previous Master as the slave. (a Maxtor 30 gb hard drive partitioned into 3. IE ..2 x 4GB and one 22gb partitions.......these were configured C (4gb) had the OS Win 98 SE on it ...E (4GB) was a back up? and F (22gb) was for video files mp3,s etc) I put Partition Magic on C and proceeded to follow directions. To cut a long story short. I got the Seagate successfully formatted.
BUT
I have done something wrong. What happened was the E and F partitions on the Maxtor combined and showed up as unallocated space on Partition magic and Free Space on XP,s Disk management...Naturally I removed it till I got some advice on what to do.... I have since tryed three disk recovery programs and had a certain amount of success with one program .....I note however that from memory all the recovered files /folders are from the 22gb partition and none from the 4gb partition that combined with it.... I still have some options to try but as a beginner I thought it best to see if anybody in the forum with experience in this field could give me their advice so that I can hopefully recover as much as I can..
Cannot get Partition Magic * to installon my Windows XP computer.
View 12 Replies View RelatedI installed PM 8.05 and used it to resize C drive (WinXP OS is there).I used the auto function to take a 1Gig amount each from drives D, E and F (about 25+ plus Gig free on each of these on a Seagate 120Gig HDD) to add to the 1Gig of free space on the C drive. The PM process seemed to go OK (went into DOS(?) and went through 7 steps to resize, etc) as there were no error messages. It said at the start it was going to do FAT 32 which is what I had the drives set up as. At the end PM said it was going to reboot and then the fan was hit. The boot up stopped at the "DMI Verifying Pool Data" message and the little line cursor just sat there blinking.
View 12 Replies View RelatedI was partitioning my C drive of windows using partition magic so that to install Linux. my laptop(hp pavilion dv5000) had only 1 partition so I tried this stupid thing. Unfortunately power went off during partition, and now I m not able to install windows XP neither from recovery disc or from regular xp cd. Some linux (suse, fedora) and windows vista are installing fine. But I need XP disparately. What to do.
View 14 Replies View Relatedi have a acer t135 sempy 3300 w/ xp home,Ive tried to convert partition to ntfs its set as this 72.6 fat 32 on (c: ---and 73.4 ntfs on (d: i had a copy of partition magic from a guy at work but when i tried it i wiped hd and had to use acer restore discs
View 6 Replies View Relatedi have a major problem. I used Partition Magic 8 last night and the program crashed halfwayn through. Now i am getting a blue screen on startup probably because of damaged sectors. I am unable to start xp to run a chkdsk or to install any partition doctor type tools I then decided to re-install my Xp. But during the start stages before installation an error comes up saying there is no hardrive on your computer. please make sure it is switched on or presesnt(or something like that)
View 1 Replies View Relatedi was attempting to resize my HD using partition magic i did not backup prior During the process my computer lost power. Upon rebooting i receive the following blue screen error message: a problem has been detected and windows has been shut down to prevent damage to our computer if this is the first time you've seen this stop error screen, restart your computer. if this screen appears again, follow these steps:
disable or uninstall any anti-virus, disk defragmentatio or backu utils. check your HD config, and check for any updated drivers run CHKDSK /F to check for HD corruption, and then restart your computer.
Recently i was attempting to resize my HD using partition magic(i did not backup prior During the process my computer lost power. Upon rebooting i receive the following blue screen error message: a problem has been detected and windows has been shut down to prevent damage to our computer if this is the first time you've seen this stop error screen, restart your computer. if this screen appears again, follow these steps:
disable or uninstall any anti-virus, disk defragmentatio or backu utils. check your HD config, and check for any updated drivers run CHKDSK /F to check for HD corruption, and then restart your computer.
It started when i use Partition Magic.
there was a notification error said that Partition Magic can't read my Hard Drive, because of 'drive wrong naming' (i forgot the exact word) then came up an option 'do you want to fix it?' YES/NO - I chose YES
but after that, I can't go into to windows again (Vista64) it stuck on loading process forever
- Hard Drive are detected on BIOS
- When I use another 'health' HD with this 'broken' one, then the 'health' HD won't boot either, but it will normally boot again if I unplugged the 'broken' HD
- When booting via Windows Installation Disk (tried to re-install Windows), it stuck again on windows loading
when i open Partition Magic 8 i see my Maxtor 6Y120P0 drive in a yellow color and the file system marked as "other": but my Windows 2000 Disk Management shows healty:
under windows i can read and write to the partition, so what is wrong? what does Partition Magic wants?
I'm receiving a windows -no disk error message that won't stop. I've recently installed System mechanic 7 and network magic
View 1 Replies View RelatedNow I am having multiple new problems. I want to completely erase the hard drive and install a new version of XP Home, not Pro. At the beginning of the installation process, it gathers system info. Immediately it responds with "no valid system partition" and the only option is to exit from the process. How can I get past this to complete the installation?
View 14 Replies View RelatedWhere should I install codec like dvix, xvid? In the partition which win xp is on and boot from, or another partition? I would like to install as less programs as possible on win xp partition.
View 7 Replies View RelatedI have a 40GB HDD. It was originally partitioned as C: (Windows - NTFS) 15GB and D: (Data - NTFS) 27GB. I decided to have one of my sporadic forays with Linux, and using a combination of Acronis partition manager and the Windows Computer Management snap-in, did the following: C: (Windows NTFS) 10GB,D: (Data - NTFS) 5GB, E: (Transfer - FAT) 2GB, the remaining free space (20GB) formatted for Linux.I then decided to bin Linux for a while and revert to my previous partition layout. Using Windows Disk management, I removed the Linux partition and created a new partition. Then using Acronis Partition Manager I resized the C: drive to 15GB. Unfortunately, I'd forgotten to repair the MBR from having GRUB on it before I did this, so when it rebooted, I had to then boot up with a W98 floppy and repair the MBR. After having done that, and all the rest of the partition management, I have a size reporting problem! Right-clicking on the C: drive in My Computer shows the previous size as 10GB, as does Acronis.However, if I use Acronis to resize a partition, when I get to allocate the additional space, it shows the correct size! Also in Disk Management, the graphical representation of the partitions shows correctly, but the statistical info in the box above shows the previous configuration.
View 6 Replies View RelatedThis follows on from my previous thread "Error messages when trying to log in to internet"I dug out the instructions for my 6 year old PC and discovered for the first time that there was a recovery option by pressing F10 during boot up. I really need to repair or reinstall windows as the PC is so messed up but there are two options.Default option: Recovers factory- shipped applications, drivers, and the operating system without affecting any data files that you may have created since purchasing this PC.
View 39 Replies View RelatedI seem to have bad luck with multiple partitions on one drive. I have a 160 gb hdd that was partitoned with one approx 137gb partition with windows xp. It was working fine. I decided to partition the remaining space which was something like 25gb. I did it from windows xp in the disk managment snap-in. It worked fine until I formatted the new 25gb partition and assigned the page file to this drive. I had not rebooted before formatting the new drive and I believe the format is what screwed up the drive. I have tried to chkdsk /r but it took forever and then crashed. I believe windows improperly sized the partition over part of the original C partition. I really hate logical drives. I always seem to have some sort of data loss with them..
View 13 Replies View RelatedA computer that i Am working on for a friend of mine. He doesn't have his windows XP cd and doesn't have the sticker on his computer but I know its legal. I used a Magic Jellybean to pull the key off and reinstalled windows.I've tried 4 different CD but it still won't take the key. If I call Microsoft will they tell me what version of XP Pro, SP1, SP1a, SP2 that I need to install and if now what do I do.
View 9 Replies View RelatedI have MS windows XP and upon booting up I get a box that says. "The Executable files in Port Magic are corrupted Please re-install
View 1 Replies View RelatedI am having a problem with my printer after installing network magic. Everytime I send a document from the main pc to the printer connected directly to it, I get a stop screen and a reboot. When it comes back I do the Microsoft error report and it says there is a problem with a driver.
View 2 Replies View Relatedno questions. I only need the driver for sound card of My Dell latitude note book. The audio driver i am looking for is neo magic 2360.
View 1 Replies View RelatedHow do I make the second partition, which includes all files from another hard drive, pretend that it is the main partition? I want to simulate the second partition being my main one for a while.
OR
How do I resize system partitions?
I have my Windows format disc and I want to create another partition with it. I tried to create one, but it said something like "You have no more space to create another partition because you used up all your space on your Windows primary partition". See, when I reformatted my computer a while back I just created 1 partition for Windows and applied all the space onto that partition.
If there is a way I could remove some space off of my Windows primary partition and create another partition with the space I removed. I want to do this so I can put general things in my other partition such as documents, music, etc. and just leave the other partition for Windows and programs.
What are the steps needed to access one of my partitions, delete it, then use 1/2 the space and apply to system drive and the other 1/2 to another partition?
View 5 Replies View RelatedI bought a new computer.It appears to have been partitioned into a NTFS format and FAT32 format.The default drive for my documents & my pictures etc is the NTFS which I have been using happily. It is Media Centre Edition so I also have a few large files (>4GB) - though I dont keep them long term.NTFS partition has fulled up - but I cant move my large files to other partition to free up space
I've done a little bit of reading but my question is "Should I reformat the FAT32 to make it more of use to me?".I cant really see the need arising to access older OS files, except .JPG's (photo's I had on my old Windows ME Comp) or "Should I move all my smaller files (documents and photo's) to the FAT32 partition and use the NTFS drive for the bigger files?"
My hard disk arrangement is C(primary partition FAT32)for Windows XP
D(extended logical FAT32) for non-os data (movies, pictures etc..)
F(primary NTFS) for Vista..
I am formatting F: and then C: through XP installation CD
(and C->NTFS from FAT32)
is this ok???
will D: be accessible after installing XP on C???