NTFS Partition Filled Up / Finding Reason To Keep FAT32 Partition?
Feb 5, 2008
I bought a new computer.It appears to have been partitioned into a NTFS format and FAT32 format.The default drive for my documents & my pictures etc is the NTFS which I have been using happily. It is Media Centre Edition so I also have a few large files (>4GB) - though I dont keep them long term.NTFS partition has fulled up - but I cant move my large files to other partition to free up space
I've done a little bit of reading but my question is "Should I reformat the FAT32 to make it more of use to me?".I cant really see the need arising to access older OS files, except .JPG's (photo's I had on my old Windows ME Comp) or "Should I move all my smaller files (documents and photo's) to the FAT32 partition and use the NTFS drive for the bigger files?"
With W98/W95B you could easily use a tool to convert FAT16 to FAT32 from within windows and not lose the data (most of the time anyhow) that was on that drive/partition.Is there any tool to convert FAT32 to NTFS without wiping (formatting) the drive/partition? I haven't been able to locate any tools to do this with and so far have been moving/copying the data I want to save on a partition to another partition and then right clicking the partition I want to convert and choosing FORMAT to NTFS instead.
On a newish Asus laptop (Series A9Rp) and before using an included Conversion .bat file... I successfully restored this machine to it its original state, adding drivers etc from a third CD-ROM. I also, for the purposes of learning, restored it to a full installation using the hidden partition which appears to be located on C: drive After doing this I converted to NTFS.
I had perfectly working PC with XP Pro installed on a 160Gb Maxtor HDD.For no reason I error checked the hard drive, which the system did after rebooting, at the end of the test the system rebooted and announced that there was a error on the boot and boot.ini.Useing XP Emergency (on disk) I tried fixmbr which did nothing then I tried Fixboot. XP found the drive identified it as FAT and said that it was successfully fixed.The drive was FAT and is now unusable.Partition Magic sees it as a FAT drive as does XP when I switched the HDD into another machine.
I have an Acer rebranded netbook and have wiped the existing partition on the hard disk.It was NTFS with Windows XP Home, and I have deleted it and recreated as 2 partitions both as FAT32.The netbook still has a hidden partition at the beginning of the disk called PQSERVICE which contains the restore data for everything.So I ran this to test it, and it restored everything back to default, BUT the restoration process automatically changed the first partition back to NTFS. It didn't effect the 2nd partition which remained as FAT32.I had considered using something like Partition Magic to convert the filesystem of this first partition back to FAT32, but am worried in case later down the line I would end up with data corruption due to this - can anyone confirm?
I am trying to create a Boot Disk for an NTFS or FAT Partition in Windows XP.So far i have formatted my floppy disk, but im stuck on the next step!Copy the Ntldr and the Ntdetect.com files from the I386 folder on the Windows XP Setup CD-ROM, Windows XP Setup floppy disk, or from a computer that is running the same version of Windows XP as the computer that you want to access with the boot floppy.I have found the Ntldr file and the Ntdetect.com file, but when i have copied them where do i paste them?? What do i do with them?
I had a ntfs file partition poo on its self. i moved the disk to another computer and it can see the disk but partition magic only sees it as an "other" partition. is there any way to repair it enough to get some irreplaceable files off of it. or is there a recommended program. i plan to wipe it after that and do a clean install
I want to install Vista RC1 as a dual boot with my Windows XP.What is the best way to do this and what software do I need (free would be nice) to create a new partition on my drive? I have a 160GB drive with lots of free room was thinking about using 30GB for the new partition?
I was reformating my pc and when i clicked to delete a partition it said it was unable to delete it thus not being able to continue reformatting. I tried almost everything (making a boot disk,...) and i dont knoe whats wrong. I've been able to reformat before but i dont know why. My system is NTFS I'd
i have a acer t135 sempy 3300 w/ xp home,Ive tried to convert partition to ntfs its set as this 72.6 fat 32 on (c: ---and 73.4 ntfs on (d: i had a copy of partition magic from a guy at work but when i tried it i wiped hd and had to use acer restore discs
pagefile.sys is corrupted since it is fixed a 2GB whatever setting (no page file, system managed...). I choose in the virtual memory panel. I can't changed its size and would like to delete it so windows xp (sp2) can recreate a new correct one. the purge at shutdown does not work too and I don't know the password for the recovery console under the DOS. I am looking for a simple solution to delete this file which is on an ntfs partition.
I recently destroyed file structure due to mistakenly writing a partition table to the wrong hard disk drive on my machine while installing an experimental version of OS X. The saving factor is that the partition that may have formatted was only 20GB out of 200GB and the rest was unallocated free space. I have installed a temporary instance of WinXP to use data recovery software and recover the majority of files from the drive (it is installed on the non-corrupted drive).
Did something really stupid the other day. Was doing a Windows install and I mistook a drive for a different drive.In short, I deleted the partition, recreated the partition, but I haven't reformatted yet. The partition was the same size before and after so that shouldn't be a problem. the files should still be there but I don't know how to get at them. I've already tried Recuva, UndeletePlus, Restoration, and a Knoppix boot disk but none of these were able to do anything because of the lack of a file system/boot sector.
How do I make the second partition, which includes all files from another hard drive, pretend that it is the main partition? I want to simulate the second partition being my main one for a while.
I have my Windows format disc and I want to create another partition with it. I tried to create one, but it said something like "You have no more space to create another partition because you used up all your space on your Windows primary partition". See, when I reformatted my computer a while back I just created 1 partition for Windows and applied all the space onto that partition.
If there is a way I could remove some space off of my Windows primary partition and create another partition with the space I removed. I want to do this so I can put general things in my other partition such as documents, music, etc. and just leave the other partition for Windows and programs.
What are the steps needed to access one of my partitions, delete it, then use 1/2 the space and apply to system drive and the other 1/2 to another partition?
My hard disk arrangement is C(primary partition FAT32)for Windows XP D(extended logical FAT32) for non-os data (movies, pictures etc..) F(primary NTFS) for Vista.. I am formatting F: and then C: through XP installation CD (and C->NTFS from FAT32) is this ok??? will D: be accessible after installing XP on C???
I would like to know if it´s possible to take free space from an extended partition and redistribute it to a primary partition using partition magic 8.0..both partitions are NTFS
Now I am having multiple new problems. I want to completely erase the hard drive and install a new version of XP Home, not Pro. At the beginning of the installation process, it gathers system info. Immediately it responds with "no valid system partition" and the only option is to exit from the process. How can I get past this to complete the installation?
My existing C: drive. First I was getting the "Error 983" error. Then I un-installed SP2 which was causing a gang of problems, freezing programs for a couple mins mostly. After I got it uninstalled I did a disk defrag, then a chkdsk /f. Now I have partitioned the drive using PM8 again and this time after the reboot it is telling me it is completed but once Windows XP reboots there is no new partition.
Im trying to install Suse Linux 9.0. But I really want to have 2 new partitions, one for Suse, and the other as a back up.
i plan to format my computer again and this time i plan to split my primary partition before i format. When i go to format i want to format only the active partition with windows in it.I have two questions. This trick does work right? the partition i created in windows using magic partition 8 won't be formated along with the active partition right? I plan to backup everything on my second partition.When i created the second partition i had two options. to either make it a logical partition or a primary partition. I chose primary partition. would that work?i plan to install windows xp pro sp2.
Over a year ago when I setup my new system and before installing most of my APPS, I backed it up to a small HD. My Win Xp Pro MCE 2004 has become a little buggy (MY FAULT).How would I copy or clone the smaller HD over to my 80GB drive AND maintain the larger partitions? I have Ghost 2003 but I'm not sure if it permits me to set the partition size when copying HD's.
I have 2 internal HDDs, and 3 external HDDs. However, the recent addition of a Mac by my sister has forced me to be able to share the external HDDs between computers. I understand that the Mac OSX reads/not writes NTFS but will read/write FAT32. Having been advised by other senior Windows users many years back, all my HDDs are in NTFS. I have found no solution to convert NTFS back to FAT32. Does anyone know if you can do so; without damage/corruption? There is much family pictures, common music in these external HDDs; so needless to say, they are precious
I reinstalled my OS several months ago, and decided that I might want a dual boot in the future. I already had an old, smaller drive in the machine that's labeled the c: drive. Reading one time that for security purposes it's good to have your OS on a drive other than C:, I decided to not alter the drive lettering.
I then partitioned a new internal hard drive into several logical drives. I formatted the D: partition as a Dos fat32 partition and the rest as NFTS partitions. Somehow, I allowed the D: partition to be the primary partition, while the E: partition which contains the Win 2000 Pro OS Winnt directory is a logical drive.
When I just checked disk management, I noticed that not only is boot.ini on the D: Dos partition, but so is ntldr along with the following Dos setup files:
To reformat my computer now and i downloaded all the files i'd need to reformat and compressed them into a single rar file to put onto my d drive.
Although when i go to move theses filesonto my d drive i get a message saying: cannot copy "reformatfiles": There is not enough free disk space Delete one or more files to free disk space, and then try again Free space on this drive by deleteting old or unnecessary diles click disk cleanup.
I've just resized a partition on my main physical drive, and the OS sees the adjacent partition as unfromatted.
I'm using Partition magic pro 7 and WinXp pro.
The partition I resized is the primary OS partition which is formatted as NTFS, the adjacent partition is FAT32. How can I get XP to recognise the FAT32 partition again?
