Can't Seem To Run Win On C / When Partition Is FAT32?
Aug 15, 2010
I have an Acer rebranded netbook and have wiped the existing partition on the hard disk.It was NTFS with Windows XP Home, and I have deleted it and recreated as 2 partitions both as FAT32.The netbook still has a hidden partition at the beginning of the disk called PQSERVICE which contains the restore data for everything.So I ran this to test it, and it restored everything back to default, BUT the restoration process automatically changed the first partition back to NTFS. It didn't effect the 2nd partition which remained as FAT32.I had considered using something like Partition Magic to convert the filesystem of this first partition back to FAT32, but am worried in case later down the line I would end up with data corruption due to this - can anyone confirm?
View 11 Replies
ADVERTISEMENT
Feb 5, 2008
I bought a new computer.It appears to have been partitioned into a NTFS format and FAT32 format.The default drive for my documents & my pictures etc is the NTFS which I have been using happily. It is Media Centre Edition so I also have a few large files (>4GB) - though I dont keep them long term.NTFS partition has fulled up - but I cant move my large files to other partition to free up space
I've done a little bit of reading but my question is "Should I reformat the FAT32 to make it more of use to me?".I cant really see the need arising to access older OS files, except .JPG's (photo's I had on my old Windows ME Comp) or "Should I move all my smaller files (documents and photo's) to the FAT32 partition and use the NTFS drive for the bigger files?"
View 10 Replies
View Related
Dec 24, 2004
some days before i convert one of my partition fat32 to ntfs file system .but now i can't convert back to fat32.
View 5 Replies
View Related
Aug 9, 2005
With W98/W95B you could easily use a tool to convert FAT16 to FAT32 from within windows and not lose the data (most of the time anyhow) that was on that drive/partition.Is there any tool to convert FAT32 to NTFS without wiping (formatting) the drive/partition? I haven't been able to locate any tools to do this with and so far have been moving/copying the data I want to save on a partition to another partition and then right clicking the partition I want to convert and choosing FORMAT to NTFS instead.
View 6 Replies
View Related
May 2, 2008
On a newish Asus laptop (Series A9Rp) and before using an included Conversion .bat file... I successfully restored this machine to it its original state, adding drivers etc from a third CD-ROM. I also, for the purposes of learning, restored it to a full installation using the hidden partition which appears to be located on C: drive After doing this I converted to NTFS.
View 14 Replies
View Related
Aug 16, 2005
How do I make the second partition, which includes all files from another hard drive, pretend that it is the main partition? I want to simulate the second partition being my main one for a while.
OR
How do I resize system partitions?
View 14 Replies
View Related
Nov 16, 2007
I have my Windows format disc and I want to create another partition with it. I tried to create one, but it said something like "You have no more space to create another partition because you used up all your space on your Windows primary partition". See, when I reformatted my computer a while back I just created 1 partition for Windows and applied all the space onto that partition.
If there is a way I could remove some space off of my Windows primary partition and create another partition with the space I removed. I want to do this so I can put general things in my other partition such as documents, music, etc. and just leave the other partition for Windows and programs.
View 1 Replies
View Related
Apr 22, 2007
What are the steps needed to access one of my partitions, delete it, then use 1/2 the space and apply to system drive and the other 1/2 to another partition?
View 5 Replies
View Related
Nov 23, 2008
My hard disk arrangement is C(primary partition FAT32)for Windows XP
D(extended logical FAT32) for non-os data (movies, pictures etc..)
F(primary NTFS) for Vista..
I am formatting F: and then C: through XP installation CD
(and C->NTFS from FAT32)
is this ok???
will D: be accessible after installing XP on C???
View 4 Replies
View Related
Dec 31, 2009
I would like to know if it´s possible to take free space from an extended partition and redistribute it to a primary partition using partition magic 8.0..both partitions are NTFS
View 1 Replies
View Related
Jul 7, 2010
Now I am having multiple new problems. I want to completely erase the hard drive and install a new version of XP Home, not Pro. At the beginning of the installation process, it gathers system info. Immediately it responds with "no valid system partition" and the only option is to exit from the process. How can I get past this to complete the installation?
View 14 Replies
View Related
Jul 25, 2005
My existing C: drive. First I was getting the "Error 983" error. Then I un-installed SP2 which was causing a gang of problems, freezing programs for a couple mins mostly. After I got it uninstalled I did a disk defrag, then a chkdsk /f. Now I have partitioned the drive using PM8 again and this time after the reboot it is telling me it is completed but once Windows XP reboots there is no new partition.
Im trying to install Suse Linux 9.0. But I really want to have 2 new partitions, one for Suse, and the other as a back up.
View 5 Replies
View Related
Apr 9, 2010
what are the steps to create partition using Paragon Manager?
View 1 Replies
View Related
May 1, 2005
I had perfectly working PC with XP Pro installed on a 160Gb Maxtor HDD.For no reason I error checked the hard drive, which the system did after rebooting, at the end of the test the system rebooted and announced that there was a error on the boot and boot.ini.Useing XP Emergency (on disk) I tried fixmbr which did nothing then I tried Fixboot. XP found the drive identified it as FAT and said that it was successfully fixed.The drive was FAT and is now unusable.Partition Magic sees it as a FAT drive as does XP when I switched the HDD into another machine.
View 4 Replies
View Related
Aug 17, 2005
i plan to format my computer again and this time i plan to split my primary partition before i format. When i go to format i want to format only the active partition with windows in it.I have two questions. This trick does work right? the partition i created in windows using magic partition 8 won't be formated along with the active partition right? I plan to backup everything on my second partition.When i created the second partition i had two options. to either make it a logical partition or a primary partition. I chose primary partition. would that work?i plan to install windows xp pro sp2.
View 8 Replies
View Related
May 3, 2006
Over a year ago when I setup my new system and before installing most of my APPS, I backed it up to a small HD. My Win Xp Pro MCE 2004 has become a little buggy (MY FAULT).How would I copy or clone the smaller HD over to my 80GB drive AND maintain the larger partitions? I have Ghost 2003 but I'm not sure if it permits me to set the partition size when copying HD's.
View 6 Replies
View Related
May 5, 2007
I want to be able to use the same external drive for both systems. Maxstor 1 Terabyte Firewire 800 drive. I note that FAT32 can be used up to 2 Terabyte, so I made 2 partitions, one 120Gb for pure Mac use in HFS+, and the balance of about 850Gb in FAT32 for either. I used a Linux LiveCD (Ubuntu 7) and Gnome Partition Editor to do the partitioning. Linux seems to see the partitions OK. However WXP sees the partition as "Unknown" and offers to format it in NTFS. I know WXP can read/write FAT32 bigger than 32Gb, as I am using an external 2.5" 120Gb drive on WXP formatted as per above method, purely in FAT32, with no read or write problems. To save me performing multiple re-partitioning and re-booting as trial and error, I wonder if anyone can inform me of the largest FAT32 partition that Windows XP Pro can read/write to before if throws a fit.
View 8 Replies
View Related
Jan 31, 2007
I reinstalled my OS several months ago, and decided that I might want a dual boot in the future. I already had an old, smaller drive in the machine that's labeled the c: drive.
Reading one time that for security purposes it's good to have your OS on a drive other than C:, I decided to not alter the drive lettering.
I then partitioned a new internal hard drive into several logical drives. I formatted the D: partition as a Dos fat32 partition and the rest as NFTS partitions. Somehow, I allowed the D: partition to be the primary partition, while the E: partition which contains the Win 2000 Pro OS Winnt directory is a logical drive.
When I just checked disk management, I noticed that not only is boot.ini on the D: Dos partition, but so is ntldr along with the following Dos setup files:
ndetect.com
arcsetup.exe
arcldr.exe
View 2 Replies
View Related
Feb 3, 2006
I'm running Xp Pro SP2 & I need to redo the system. I have 2 Samsung 80gb hard drives but only one is currently in use.
What would be the best way to set them up for system speed, reliability & ease of back ups?
What sort of partitioning software do people have experience with ?
View 2 Replies
View Related
Feb 29, 2008
To reformat my computer now and i downloaded all the files i'd need to reformat and compressed them into a single rar file to put onto my d drive.
Although when i go to move theses filesonto my d drive i get a message saying: cannot copy "reformatfiles": There is not enough free disk space
Delete one or more files to free disk space, and then try again
Free space on this drive by deleteting old or unnecessary diles click disk cleanup.
View 1 Replies
View Related
Sep 8, 2005
I've just resized a partition on my main physical drive, and the OS sees the adjacent partition as unfromatted.
I'm using Partition magic pro 7 and WinXp pro.
The partition I resized is the primary OS partition which is formatted as NTFS, the adjacent partition is FAT32. How can I get XP to recognise the FAT32 partition again?
View 2 Replies
View Related
Jun 20, 2008
I decided to try Linux. 'Ubuntu' was my type selection. After trying by running off a CD I then decided that I would pick up some partitioning software like 'Partition Magic' or some software along that line to do the partition. But somewhere(s) I read that virtual or software partitions are less then a good idea for reasons I don't recall at the moment.
Is that true? If so, why and/or to what extent?
View 4 Replies
View Related
Jan 5, 2008
Is it possible to recover data from an external HD that I accidently deleted the partition and created a new one I just got a "new" computer - it's actualy a hand-me-down that I was trying to do a clean install of Windows XP on. I booted it up with the XP disk in the CD drive, and thought I was telling it to delete the existing partition and create a new one on the C: drive, but I didn't realize that it was also recognizing the external drive, which was already plugged into a USB port (why I even went ahead and plugged it in I don't know - that was stupid mistake It was the first one listed, and I thought it was telling me that there were two partitions on the internal drive, not two drives I also didn't pay attention to the size it was telling me the drive was (stupid mistake #2), I just told it to create a partition with the maximum possible size
View 4 Replies
View Related
Mar 9, 2006
When I start my computer it goes to a screen saying "checking file system FAT32" and then proceeds to check disks and says "one of your disks needs to be checked for consitency" then it runs through the process to 100% and is up an running after that. My question is why is it suddenly doing that and does that signify a problem? Do you need a HJT log of my system?
Thanks!
View 1 Replies
View Related
Mar 10, 2007
How can I format 80gb hard disk in fat32 and install xp on it
View 7 Replies
View Related
Jun 3, 2006
Had Win98SE FAT32, now have WinXP NTFS Save a lot of data on cd's. copied data to new system, it only reads some of the info??? What did I do wrong?
View 6 Replies
View Related
Apr 1, 2005
I'm upgrading to XP Pro from 98se and a question has popped up whether I should leave the current file system in tact or switch to NTFS. Can someone explain to me what the difference is and whether I should switch?
View 14 Replies
View Related
May 27, 2006
I'm trying to convert my external hard drives to NTFS from FAT32.I have used convert f:/fs:ntfs.I am getting this message:"The type of the file system is FAT32.""Enter current volume label for drive f:"
View 10 Replies
View Related
Feb 22, 2007
XP installed recently is working well, but there's a problem. Startup was taking a long time, and once the black screen w/ XP logo came up, it soon went away and just left a blank black screen. This time I waited, and window came up saying system would do a disk check. It did so quickly, and message said "F" drive (external Seagate 160MB HD), is FAT32. When installing XP, I chose NTFS. There are many docs & files on the external HD. In addition to installing XP, also installed Office 2003, a newer version than what the word & excel docs on external HD were created in. Previous OS was WinMe, current RAM is 512, 1 MHz processor, Dell desktop. Once system did the disk check, it stayed on that screen, so I shut down, turned off the external HD, and restarted. Everything came up fine, and very quickly. Is it possible to convert any of the files on the external HD to NTFS? Or is there a way to access, edit those files that won't conflict with my new OS?
View 9 Replies
View Related
Sep 25, 2006
i have an old computer that has xp pro and i would like to put windows 95 on it but i can not because the file system NTFS is not supported by win 95 how can i convert the file system back to FAT32 to be able to use windows 95 is there any free programs or something that can do that?
View 14 Replies
View Related
Jun 23, 2010
old hard drive taken from a windows 98 computer formatted in fat32 and transfered to a new windows xp pro computer can't take ownership of old files because the security tab does not show on the fat32 drive.
View 6 Replies
View Related
