Want To Create A Secondary Partition, But Added All Space On Primary Partition
Nov 16, 2007
I have my Windows format disc and I want to create another partition with it. I tried to create one, but it said something like "You have no more space to create another partition because you used up all your space on your Windows primary partition". See, when I reformatted my computer a while back I just created 1 partition for Windows and applied all the space onto that partition.
If there is a way I could remove some space off of my Windows primary partition and create another partition with the space I removed. I want to do this so I can put general things in my other partition such as documents, music, etc. and just leave the other partition for Windows and programs.
View 1 Replies
ADVERTISEMENT
Dec 31, 2009
I would like to know if it´s possible to take free space from an extended partition and redistribute it to a primary partition using partition magic 8.0..both partitions are NTFS
View 1 Replies
View Related
Nov 23, 2008
My hard disk arrangement is C(primary partition FAT32)for Windows XP
D(extended logical FAT32) for non-os data (movies, pictures etc..)
F(primary NTFS) for Vista..
I am formatting F: and then C: through XP installation CD
(and C->NTFS from FAT32)
is this ok???
will D: be accessible after installing XP on C???
View 4 Replies
View Related
Aug 17, 2005
i plan to format my computer again and this time i plan to split my primary partition before i format. When i go to format i want to format only the active partition with windows in it.I have two questions. This trick does work right? the partition i created in windows using magic partition 8 won't be formated along with the active partition right? I plan to backup everything on my second partition.When i created the second partition i had two options. to either make it a logical partition or a primary partition. I chose primary partition. would that work?i plan to install windows xp pro sp2.
View 8 Replies
View Related
Apr 22, 2007
What are the steps needed to access one of my partitions, delete it, then use 1/2 the space and apply to system drive and the other 1/2 to another partition?
View 5 Replies
View Related
Aug 24, 2005
added new hard drive my computer sees it but need to know how to partition it
or add them together to use the memory using xp
View 3 Replies
View Related
Sep 29, 2006
I added a new 250 gig ATA Seagate drive to my son's EMachine 2882. I added it as a Slave drive (setting jumper to slave and placing on the end of the parallel cable) to use for backing up purposes.Everything is fine, I think. Went into Disk Management and attempted to partition the un allocated new disk. For some strange reason, everytime I try to partition the disk it appears to be (not sure) but it appears to be creating 8 megabyte partitions? Do I have some setting in the BIOS that needs tweaking? I am not a total idiot, but I am beginning to wonder! Can anyone please get me on the right track here? XP does recognize the Seagate drive but something is screwy with the formatting process.
View 13 Replies
View Related
Aug 29, 2005
I deleted the priamry partition on my gateway computer. Windows XP. Is my home computer and it was infected with tons of viruses. I think I screw up big time. I keep putting the recovery Cd back in, but at one point it doesn't recognice some of the files that is uploading. After a while it goes to a black screen.
View 3 Replies
View Related
Aug 15, 2005
I seem to have bad luck with multiple partitions on one drive. I have a 160 gb hdd that was partitoned with one approx 137gb partition with windows xp. It was working fine. I decided to partition the remaining space which was something like 25gb. I did it from windows xp in the disk managment snap-in. It worked fine until I formatted the new 25gb partition and assigned the page file to this drive. I had not rebooted before formatting the new drive and I believe the format is what screwed up the drive. I have tried to chkdsk /r but it took forever and then crashed. I believe windows improperly sized the partition over part of the original C partition. I really hate logical drives. I always seem to have some sort of data loss with them..
View 13 Replies
View Related
Aug 6, 2007
I have a Dell Power Edge server with a C: drive that is too small. The RAID array is about 40GB but only 9 GB was given for the C: drive and it has run out of space so I cannot install service packs, extra software, etc. The remaining space is an F: drive with the "data" on it. What method should I use to extend the partition, I am thinking of just moving all of the F: drive to an external hard drive and then deleting the F: drive and trying to extend the partition in Windows Disk Manager, but I wonder if that will even work, or if there is a better tool out there to use to manage these partitions. I would like to preserve the Windows installation and everything on the C: drive if at all possible. I dont care if I have an F: drive, if I can just get a big enough C: drive, that will be fine.
View 7 Replies
View Related
Mar 20, 2007
I installed gentoo on my primary hard drive and have boot, swap and root partitions on it and they take up the whole drive. I want to install windows on the secondary hard disk but it is saying it needs a compatible partition on the primary drive but it is already full!
View 8 Replies
View Related
May 1, 2006
i recenty reinstalled xp and for some reason it only partitioned 4.87GB of my 120GB HD...i got another xp cd and tried to delete the existing partion and create a new one but it wouldn't let me saying that, there was temporary files needed for installation on that partition.
View 1 Replies
View Related
Jul 24, 2010
so i am trying to install windows xp pro on my dell xps 600, my problem is that it has vista on it now and every time i boot from the xp disk to install it is saying that i need to create a partition, and i do not know how to do this,
View 8 Replies
View Related
Mar 21, 2008
ive just dual booted win 98/xp and im hoping to install ubuntuis there any way i can create enother partition without having to reinstall either os
View 7 Replies
View Related
Apr 14, 2005
Is there any difference between the primary and secondary IDE channels? I have my hard drive on secondary and my DVD 16X burner on primary. I tried this because when I put my DVD burner on secondary it would only get Multi-Word DMA mode 2 while the HDD got UDMA mode 5 on the primary. This is a new burner and capable of UDMA 4. After troubleshooting I switched channels and got UDMA mode 4 on the DVD burner when on the primary as master and still got UDMA mode 5 on the only HDD on the secondary as master. I don't understand the difference and the computer works fine and it appears I am getting the transfer modes I am supposed to.
View 6 Replies
View Related
Jul 25, 2010
every time i try to install xp pro by booting from disk it tells me to pick a partition from the list. but then the list says that there is nothing there and then when i hit c to create a partition like it says to do. it does nothing. now i dont know what is causing this.
View 1 Replies
View Related
May 12, 2005
My friend and I took both of our old computer and combine them so we could have a small end gaming computer. Previously on the Hardrive was installed Windows 98 but we reformatted the Harddrive and are trying to put Windows Xp on it. We went through the setup with a series of from my HP System Recovery CD's (7 Disc's). Which installs Window's Xp, we went through all 7 CD's and at the very last CD when the installation was about complete it says "Unable to locate/create user partition." I have no idea what this means...and everytime we boot up the computer it just trys to do the Hp System Restore again but only goes as far as the unable to locate/create user partition.I'm not real sure what I should do...or how I can get out of it.but if theres anyway possible just to reformat again since I can't really get out of it can you please tell me how!
View 14 Replies
View Related
Aug 1, 2002
After partitioning, my 80 GB HDD is only 74.5GB. Can I recover the lost space using Partition Magic or something.
View 13 Replies
View Related
Dec 25, 2004
I bought a Seagate 169GB Barracuda Hard drive and set about partitioning it with Partition Magic. Initially I was being advised via phone by a friend in a neighbouring country. I put the Seagate as the Master and my previous Master as the slave. (a Maxtor 30 gb hard drive partitioned into 3. IE ..2 x 4GB and one 22gb partitions.......these were configured C (4gb) had the OS Win 98 SE on it ...E (4GB) was a back up? and F (22gb) was for video files mp3,s etc) I put Partition Magic on C and proceeded to follow directions. To cut a long story short. I got the Seagate successfully formatted.
BUT
I have done something wrong. What happened was the E and F partitions on the Maxtor combined and showed up as unallocated space on Partition magic and Free Space on XP,s Disk management...Naturally I removed it till I got some advice on what to do.... I have since tryed three disk recovery programs and had a certain amount of success with one program .....I note however that from memory all the recovered files /folders are from the 22gb partition and none from the 4gb partition that combined with it.... I still have some options to try but as a beginner I thought it best to see if anybody in the forum with experience in this field could give me their advice so that I can hopefully recover as much as I can..
View 14 Replies
View Related
Aug 16, 2005
How do I make the second partition, which includes all files from another hard drive, pretend that it is the main partition? I want to simulate the second partition being my main one for a while.
OR
How do I resize system partitions?
View 14 Replies
View Related
Feb 5, 2008
I bought a new computer.It appears to have been partitioned into a NTFS format and FAT32 format.The default drive for my documents & my pictures etc is the NTFS which I have been using happily. It is Media Centre Edition so I also have a few large files (>4GB) - though I dont keep them long term.NTFS partition has fulled up - but I cant move my large files to other partition to free up space
I've done a little bit of reading but my question is "Should I reformat the FAT32 to make it more of use to me?".I cant really see the need arising to access older OS files, except .JPG's (photo's I had on my old Windows ME Comp) or "Should I move all my smaller files (documents and photo's) to the FAT32 partition and use the NTFS drive for the bigger files?"
View 10 Replies
View Related
May 4, 2006
Computer is running slow. The main systems files disk (C: drive) only has 8% remaining disk space. I ran a few diagnostic programs that stated the lack of disk space is slowing down my system considerably. I have another partition (F: drive) that has 50% space,Is there a way I can re-allocate that partition back into the C drive to allow my computer to function better
View 14 Replies
View Related
Jul 14, 2005
How would I go about resizing one partition; making it smaller, and then adding the free'ed up space to the other partition? I am currently using Windows XP. Could someone please help me as soon as possible, I do not want to buy software, I will use free software if I have to
View 14 Replies
View Related
May 6, 2010
I just installed XP on a new 106GB HD. Somehow I created a primary partition of 7.81GB letter I. That left me 141.23 GB of unallocated disk space. I've already installed my OS and most of my software and other peripherals. That's obviously used most of the 8GB of the primary. The unallocated part of the drive isn't assigned a drive letter so I'm hoping that helps me. I don't need a partition or if I have to have one a small one is fine. I thought the 8GB would be good for the OS with some extra, but I'm real concerned about all that unused space. I did a google and did learn about right clicking on the unallocated side and selecting new partition and taking it from there. I was just a little concerned about making a 2nd mistake. A little frazzled as this is all within 3 hours.
View 5 Replies
View Related
Jul 7, 2010
Now I am having multiple new problems. I want to completely erase the hard drive and install a new version of XP Home, not Pro. At the beginning of the installation process, it gathers system info. Immediately it responds with "no valid system partition" and the only option is to exit from the process. How can I get past this to complete the installation?
View 14 Replies
View Related
Jul 25, 2005
My existing C: drive. First I was getting the "Error 983" error. Then I un-installed SP2 which was causing a gang of problems, freezing programs for a couple mins mostly. After I got it uninstalled I did a disk defrag, then a chkdsk /f. Now I have partitioned the drive using PM8 again and this time after the reboot it is telling me it is completed but once Windows XP reboots there is no new partition.
Im trying to install Suse Linux 9.0. But I really want to have 2 new partitions, one for Suse, and the other as a back up.
View 5 Replies
View Related
Apr 9, 2010
what are the steps to create partition using Paragon Manager?
View 1 Replies
View Related
May 1, 2005
I had perfectly working PC with XP Pro installed on a 160Gb Maxtor HDD.For no reason I error checked the hard drive, which the system did after rebooting, at the end of the test the system rebooted and announced that there was a error on the boot and boot.ini.Useing XP Emergency (on disk) I tried fixmbr which did nothing then I tried Fixboot. XP found the drive identified it as FAT and said that it was successfully fixed.The drive was FAT and is now unusable.Partition Magic sees it as a FAT drive as does XP when I switched the HDD into another machine.
View 4 Replies
View Related
May 3, 2006
Over a year ago when I setup my new system and before installing most of my APPS, I backed it up to a small HD. My Win Xp Pro MCE 2004 has become a little buggy (MY FAULT).How would I copy or clone the smaller HD over to my 80GB drive AND maintain the larger partitions? I have Ghost 2003 but I'm not sure if it permits me to set the partition size when copying HD's.
View 6 Replies
View Related
Jan 31, 2007
I reinstalled my OS several months ago, and decided that I might want a dual boot in the future. I already had an old, smaller drive in the machine that's labeled the c: drive.
Reading one time that for security purposes it's good to have your OS on a drive other than C:, I decided to not alter the drive lettering.
I then partitioned a new internal hard drive into several logical drives. I formatted the D: partition as a Dos fat32 partition and the rest as NFTS partitions. Somehow, I allowed the D: partition to be the primary partition, while the E: partition which contains the Win 2000 Pro OS Winnt directory is a logical drive.
When I just checked disk management, I noticed that not only is boot.ini on the D: Dos partition, but so is ntldr along with the following Dos setup files:
ndetect.com
arcsetup.exe
arcldr.exe
View 2 Replies
View Related
Feb 3, 2006
I'm running Xp Pro SP2 & I need to redo the system. I have 2 Samsung 80gb hard drives but only one is currently in use.
What would be the best way to set them up for system speed, reliability & ease of back ups?
What sort of partitioning software do people have experience with ?
View 2 Replies
View Related
