I recently turned on my computer to find that one of my hard drives is not formated, but was full of data the day before.Is there a way to recover the partition and data without paying for data recovery services?
View 6 RepliesI have Windows XP , total physical memory 2,058MB, available physical memory 1.26 gb. My hard drive is partitioned into Drive C, with 20GB capacity, 1.45 GB free space (7% ), and Drive D, with 213 GB capacity and 213 GB free space.
With only 7% free space in Drive C, I am restricted in doing some things such as defragmenting and using some programs. How do I take advantage of all this empty space on Drive D, which is just sitting there, to relieve the pressure on Drive C?
My sony vaio computer ( C drive ) is getting slow and has only 3.67 GB free space left out of 13.76 GB. The D drive has 60.5 GB of unused space. Is there a way to transfer some of the data on the c drive to the d drive and still have it available?
View 12 Replies View Related40GB HD installed recently. Unfortunately, the installer took the simplest option of making the whole new drive a single partition, instead of two of 8GB and 32GB, identical to the other drive. The organisation is therefore now as follows:That's obviously more secure than before, but I'd like to go further. I want to use DriveImage 2002 to copy the OS to F, so that in an emergency we could boot up to that instead of C. But DI won't allow that. Even though C contains only a TOTAL of about 7GB, and F is 8GB,it says there is insufficient space. It's been a long time since I last used DI, and I'm nervous about how best to proceed at minimum risk. Can I achieve my aim by using the facilities under Disk Operations to 'Redistribute free space among partitions'?
View 15 Replies View Relatedadded new hard drive my computer sees it but need to know how to partition it
or add them together to use the memory using xp
i have a primary hard drive working fine and added another hard drive 80gig maxtor as a slave and i'm using win xp pro.
i know there's computer management menu here in winxp, my question is:on how to format then partition my second hd,into 2(40 gig and 40 gig).basically i need the correct steps or commands.
When I completely re-did my hard drive, I split it into two partitions; a 50gb C: and a 30gb paritition. I don't know how to format or access my 30gb partition or turn it into an actual (letter):Do I need a special program?
View 13 Replies View RelatedI have an old customized computer from my grandma and when it boots up it asks me to select a operation system, there are two. How do I delete the operating system I don't want?I don't care if I have to reformat the whole hard drive... I would actually prefer to. And I have tried to delete one, but I cant seem to get rid of one of them.
View 4 Replies View RelatedI'm not sure this belongs in this section so if its out of place, plz move it.Ok, I just bought a HITACHI HDT725032VLA360 320GB HDD. My OS is currently installed on my 80GB WD800JB. I was thinking of reinstalling windows on the HITACHI but I'm unsure of how to partition it to ensure my performance is as good as possible. So what are your recommendations for the partition size for the OS on the HITACHI ?
View 7 Replies View RelatedI am using xp home and have a 18.6 GB byte hard drive and will be reformatting soon and was wondering if I should partition it or not.What are the advantages?Is it ok to leave it as 1 as I have it now?
View 8 Replies View RelatedI have an xp partition that takes up about half of my hard drive.The rest of the hard drive is just un-partitioned space.What is the easiest and fastest way to resize the xp partition so that it takes up the entire hard drive?
View 6 Replies View RelatedI have partitioned my hard drive and loaded Windows XP in one partition. How do I set the default to load any programs into the second partition. My intent is to only have the operating system in the first partition.
View 3 Replies View RelatedI have a computer that Im trying to fix, the only way to input to the computer at this point and time is the hard drives. I have a working computer obviously. So could I take the hard drive out of the broken computer, give it two partitions, copy the windows install to one partition, start the the install in the broken computer from that partition and install that onto the second partition? Ive heard of this being down but I am no expert.
View 3 Replies View RelatedI copied my data files to my external Maxtor hard disk before I tried to reformat my internal hard drive and reload Win XP. However during my partition, I didn't realize I still had the external drive (160GB) plugged in and it showed up at the top of the list and the original internal (80GB) below it. So, I followed the instruction mistakenly and went through the process of deleting the partition(on the external hard drive) and tried to partition it into two drives. Then I got an error message as I continue to try to format the hard drive "Your computer's startup program cannot gain access to the disk containing the partition or free free space you choose . Set up cannot install Window XP on this hard disk." I stopped, reboot and tried to go through the delete partition several times with the same error message. After several attempts, I realized that the external hard drive was still plugged in.
So I unplugged the external hard drive and reboot to go through the process of reformatting and partition the internal hard drive into C drive and E drive and loaded Win XP. Now even though I plugged in the hard.After I installed the external hard drive's
software,driver and restarted the computer, I connected the external hard drive and don't see the drive in my computer. I could find it under Control Panel/System/Device Manager/Disk drives but it doesn't show up as an external hard drive under "My computer" with a drive letter. Under the disk management, I see the drive as Disk1 but it was unallocated. Did I lose all my data due to the delete of partition? Can I recover my data and drive ?
I'm having a hard time formating my system. I recently got virus that was so bad i couldn't access my desktop, so i am now formating my hard drive. I go through the process of a clean install and i make the partition I hit quick ntfs and it goes on fine until it restarts the computer. All it does is it either loads up on the cd or it hangs on a - mark on a black background, and later tells me non system disk or disk error replace and strike any key when ready. I'm wondering if jumper settings may have something to do with this or if the hard drive is screwed up.
View 1 Replies View RelatedMy computer came with a 80gb HD with windows xp pro.. I had took a 180gb hd from another comp. that was running windows xp home and connected it as a slave drive. A window popped warning me that vital info. would be deleted in order to format/ partition the second drive (180gb HD). Was this a mistake doing it in this manner? If not...How would I go about using the whole "180gb" and not just the 35gb it's only allowing me to use. And is there any way to move files so that they will be protected?
View 2 Replies View RelatedI have a 250GB Western Digital hard drive with a ~195GB partition formatted as FAT32. The partition is called "Documents" and has the letter C: assigned to it. The rest of the hard drive isn't formatted. The operating system (WinXP) is installed on a different hard drive.Since yesterday in My Computer or Explorer it's called "Local Disk C:" and whenever I click on it I get a box that says "The disk in drive C is not formatted. Do you want to format it now?". For two hours it came back and I backed up all the most important information but then the same problem came back again. I was able to see the contents of the partition through a few applications but not access it. My whole computer is working sluggish since this happened.
View 14 Replies View RelatedIt started when i use Partition Magic.
there was a notification error said that Partition Magic can't read my Hard Drive, because of 'drive wrong naming' (i forgot the exact word) then came up an option 'do you want to fix it?' YES/NO - I chose YES
but after that, I can't go into to windows again (Vista64) it stuck on loading process forever
- Hard Drive are detected on BIOS
- When I use another 'health' HD with this 'broken' one, then the 'health' HD won't boot either, but it will normally boot again if I unplugged the 'broken' HD
- When booting via Windows Installation Disk (tried to re-install Windows), it stuck again on windows loading
I understand the need for system restore to be enabled on the C: drive. But should it be enabled on the d: drive/recovery partition?
View 1 Replies View Relatedive got a hard drive that i could accsess all the time. Then one day no workie now when I try to acceses the drive I get a window that pops up and says Compaq Recovery partition warning. This area of your hard disk (or partition)contains files used for your system recovery. donot delete or alter these files. anychange to these files could delete or alter these files
View 1 Replies View RelatedEvery time I try to install Windows XP from the CD onto my friend's computer, I get to the blue screen where you're able to format/partition the hard drive and then his keyboard stops working. I don't know how to get around this because I can't continue the installation w/o the use of the keyboard. Unfortunatly, he has Windows ME on his computer right now so this issue needs to be resolved.
View 6 Replies View RelatedI would like to reallocate my 2 partitions on my HDD, because I am running low on one of them . Can this reallocation be done in the Disk Management portion of XP? If so, how do I do it My C partiton has 17g and my F has 37 g. I'd like to even them out.
View 2 Replies View RelatedI installed gentoo on my primary hard drive and have boot, swap and root partitions on it and they take up the whole drive. I want to install windows on the secondary hard disk but it is saying it needs a compatible partition on the primary drive but it is already full!
View 8 Replies View RelatedCorrect me if I'm wrong but I was under the impression that hard drive letters were assigned each time the machine booted up & only c & d were reserved for the operating system & CD/DVD drive & if the number of drives altered from one boot up to the next these letters could change. The reason hat I ask is that I changed an internal drive which had several partitions on it only to find that this drive isn't recognized, but even though it isn't recognized by My Computer or disk management the other partition are labeled as if this were listed.I now don't have a an 'e' & 'g' drive listed. But I do have a 'J' & 'k' listed. Where is my other drive 'e' & 'g' & how do I get to use the data on them.
View 6 Replies View Related2nd drive no longer shows up in BIOS, my computer, or control panel system hardware. When I checked my C drive, in the control panel system hardware it's now listed as a SCSI hard drive, and includes a SCSI controller. How do I convert it back to a standard IDE SATA hard drive. And is this transformation is the cause of my lost 2nd drive?
View 4 Replies View RelatedI recently had Spyware on my computer, after I deleted it and rebooted the error message came up <windows root> system32hal.dll. missing ! I tried to reboot using the recovery console on the windows CD but windows cannot find the Sata hard drive at all So I cant use the CD to reinstall windows over existing windows either I have access to another system, without a floppy drive but not sure what the best method of solving this problem is...Dont want to reformat as I have things on the H/D I need, I know I should have backed up...unfortunately I didnt, wont happen again though, lesson well and truly learned
View 14 Replies View RelatedMy HP Mini has a 16GB hard drive and I've had it for about 6 months now. When I used CCleaner and WinDirStat yesterday, it only scanned and showed 6 GB of total space, not free space. I don't use very many programs, and I'm trying to find out where all of my memory went:To save hard drive space, I've turned off both hibernation and System restore, moved my My Documents folder to my SD card, and kept my installations to about 1.5 GB.
View 8 Replies View Relatedi am running windows xp pro, i ran into the blue screen of death 3 days ago,i fix it but when i turn on the computer everything was like it was brand new.all of my folders n files were gone off my desktop.all of my music n videos r gone. and the crazy thing about all this is,when i click on my c drive its showin the same gigs that was being use before the blue screen.its like everything is there but invincible.
View 1 Replies View RelatedI have a Compaq Presario 2580US Notebook with an operating system Windows XP Home Edition. Previously I installed Windows XP Professional, and then after a few months something happened (I don't know what), and my computer would not operate. I charged up the battery completely and when I went to BIOS Utility to do a self test on the Hard Drive, it said no Hard Drive was detected and there was no IDE. I, then, had a friend look at it, and he pulled out the Hard Drive and noticed two prongs were bent. The prongs were then bent back staright and the drive put in. This still did not fix the problem. It says the command interepreter is missing.
View 3 Replies View RelatedI have Easy Recovery Pro, but I do not like the way it recovers files on a hard drive with a missing allocation table. What software can I use to recover a hard drive where I know the data is still there, but the allocation table is missing. I used to use Norton Disk Doctor and Sytem Utilities.
View 3 Replies View Relatedi had Ubuntu (dual boot with XP), and i got both partions on 15GBs each, now that Ubuntu its gone, i thought that my XP would have back the 30GB it used to have but it doesnt, it still says it has the 15GB the partion used to have, and i deleted Ubuntu by using my XP disk and Repaired the computer doing the fixmbr thingy and i thought it was going to make it the way it was before, also, my floppy drive doesnt seem to work, it lights up, when i log in it seems like its trying to scan a floppy or something, and when i try to open up a floppy disk it freezes the window and doesnt let me work or anything.
View 4 Replies View Related