i had Ubuntu (dual boot with XP), and i got both partions on 15GBs each, now that Ubuntu its gone, i thought that my XP would have back the 30GB it used to have but it doesnt, it still says it has the 15GB the partion used to have, and i deleted Ubuntu by using my XP disk and Repaired the computer doing the fixmbr thingy and i thought it was going to make it the way it was before, also, my floppy drive doesnt seem to work, it lights up, when i log in it seems like its trying to scan a floppy or something, and when i try to open up a floppy disk it freezes the window and doesnt let me work or anything.
I tried to install Ubuntu onto my HD yesterday, and i ran into an issue during the install (i received a message that said the optical disk or hard drive had an error and that the instal would be aborted). So the Ubuntu install was aborted, and i tried to boot back into windows but received this message:
Quote: Load needed for kerenl:
ntoskrnl.dll
hal.dll
kdcom.dll I have tried to boot into safe mood with no luck. So i tried to do a repair from the XP disk i have, but then i received this error message:
I've recently installed windows xp over again and when I did it doesn't read the full hdd. so now I have 124 of the full 232.I'm on SP 2 right now and I believe I'm fully updated. I've already attempted partition magic and one I think it was called gnome drive. Both want me to purchase the products so I'm trying to find the free way out.
i have an Acer aspire 5630 laptop, running windows xp media edtion. It has a 110 GB hard drive which Acer partitioned in 3 parts. The first one im not concerned about its almost 5 GB and called PQ service (EISA configuration. the other 2 are just over 53 GB one has my xp the other was formatted to NTFS, I found I could delete the partition and then from command from extend the main partition typing diskpart, list volume, select the volume i want to extend by typing select volume 1 or whatever then type extend with the amount or if i leave it blank it should extend the partition to the full drive. but when i type extend I get the following message. Diskpart failed to extend the volume. please make sure the volume is valid for extending. And i desperately need the extra space.
In the start menu, the left half is completely devoid of any programs, except for the "All Programs" list. The right half works great. I've gone through the "Customize Start Menu" options and every thing is set up properly.
Correct me if I'm wrong but I was under the impression that hard drive letters were assigned each time the machine booted up & only c & d were reserved for the operating system & CD/DVD drive & if the number of drives altered from one boot up to the next these letters could change. The reason hat I ask is that I changed an internal drive which had several partitions on it only to find that this drive isn't recognized, but even though it isn't recognized by My Computer or disk management the other partition are labeled as if this were listed.I now don't have a an 'e' & 'g' drive listed. But I do have a 'J' & 'k' listed. Where is my other drive 'e' & 'g' & how do I get to use the data on them.
2nd drive no longer shows up in BIOS, my computer, or control panel system hardware. When I checked my C drive, in the control panel system hardware it's now listed as a SCSI hard drive, and includes a SCSI controller. How do I convert it back to a standard IDE SATA hard drive. And is this transformation is the cause of my lost 2nd drive?
I've been trying to solve this for a few days now and I'm not having any luck. I don't have access to a PC running a windows OS or I'd just set up the flash drive there.
I uninstalled Internet Explorer 7 Beta and now when I log on all I get is the desktop picture and an error message saying Explorer.EXE cannot find normaliz.dll reinstalling will correct the problemHowever I have no way of installing the dll because I can only log on in Safe Mode with command Prompt.
I recently had Spyware on my computer, after I deleted it and rebooted the error message came up <windows root> system32hal.dll. missing ! I tried to reboot using the recovery console on the windows CD but windows cannot find the Sata hard drive at all So I cant use the CD to reinstall windows over existing windows either I have access to another system, without a floppy drive but not sure what the best method of solving this problem is...Dont want to reformat as I have things on the H/D I need, I know I should have backed up...unfortunately I didnt, wont happen again though, lesson well and truly learned
I recently turned on my computer to find that one of my hard drives is not formated, but was full of data the day before.Is there a way to recover the partition and data without paying for data recovery services?
My HP Mini has a 16GB hard drive and I've had it for about 6 months now. When I used CCleaner and WinDirStat yesterday, it only scanned and showed 6 GB of total space, not free space. I don't use very many programs, and I'm trying to find out where all of my memory went:To save hard drive space, I've turned off both hibernation and System restore, moved my My Documents folder to my SD card, and kept my installations to about 1.5 GB.
i am running windows xp pro, i ran into the blue screen of death 3 days ago,i fix it but when i turn on the computer everything was like it was brand new.all of my folders n files were gone off my desktop.all of my music n videos r gone. and the crazy thing about all this is,when i click on my c drive its showin the same gigs that was being use before the blue screen.its like everything is there but invincible.
I have a Compaq Presario 2580US Notebook with an operating system Windows XP Home Edition. Previously I installed Windows XP Professional, and then after a few months something happened (I don't know what), and my computer would not operate. I charged up the battery completely and when I went to BIOS Utility to do a self test on the Hard Drive, it said no Hard Drive was detected and there was no IDE. I, then, had a friend look at it, and he pulled out the Hard Drive and noticed two prongs were bent. The prongs were then bent back staright and the drive put in. This still did not fix the problem. It says the command interepreter is missing.
I have Easy Recovery Pro, but I do not like the way it recovers files on a hard drive with a missing allocation table. What software can I use to recover a hard drive where I know the data is still there, but the allocation table is missing. I used to use Norton Disk Doctor and Sytem Utilities.
HP ZT3000 was working fine. after no major changes, hard drive made a few noises and a missing hal.dll error message appeared. I have tried knoppix, for a few times I was copying files to external hard drive but the transfer stalled. I have tried fixmbr, fixboot, and copying the ntldr and ntdetec files from recovery cd. One strange thing is that the file system is now listed as fat16. Is this data recoverable? I have backed up the system on the external but it was about 2 weeks ago. I would like to recover a few emails in the outlook pst file. Is the hard drive fried or did the boot.ini file become terribly corrupt?
Installed new hard drive, along with XP Home (recovery disk).Before my system crashed all my motherboard drivers were on D: partition.XP loads okay, but it is unstable - for example I cannot start msconfig under "Normal" start up. It crashes. I will not list all the BSOD - but XP doesn't like something.I have no devices connected apart from basic graphics card (which XP loaded the drivers for okay). I am waiting for XP Pro to be delivered, so I am hoping that my unstable XP will become stable after I upgrade (or full installation) of a retail version.
Prior to installing my current XP (one time of at least 30 others - as kept crashing),I tried to load my motherboard drivers from the disk my manufacture supplied.is it possible that my XP Home is unstable BECAUSE I do not have my motherboard drivers loaded? That might seem a naive question - but I honestly do not know, and I've started to become a tad paranoid as these problems have been ongoing for 5 weeks.
PC (XP) wont boot, says NTLDR missing.I wonder if anyone could give me any advice about how to salvage my firefox bookmarks from my system which wont even boot. (the bookmarks are all i need to salvage from the c drive as my downloads files and documents are safely stored on my 2nd hard drive) My home PC (windows XP) died a death the other day playing up, wont boot now, says ntldr is missing, wont even boot up in safe mode, it doesnt get as far as giving me an option. (tried swopping cables around and stripped bare to the basics needed to boot but no such luck there either). Boots up with a unix live disc but i noticed it cant detect the c drive on the system, altho it does in bios.
Hello everyone. I am currently using Windows XP SP2 on a Thinkpad T43 laptop. My main partition which houses windows xp is 34 GB total size. When I highlight the C: drive in "My Computer", it tells me that I have 10GB of free space (therefore I'm using 24GB). When, however, I double click on C: and go into that folder, select all (and yes, I have enabled viewing hidden files/folders), right-click and choose properties, I am then told that C: only contains 15GB of files/folders. Where is this missing 5GB?
I recently tried to reinstall windows xp, but the installation was interrupted and left me with a partially installed windows on my hard drive. Now, whenever I try to install again, it gives me the error: NTLDR is missing. I made a msdos boot disc to reformat my drive such that I can try installing windows again. However, I have two hard drive (one for windows and programs and one for storage) and I don't know which one is which letter. How can I find this information, so that I don't accidentally wipe my storage drive?
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
using XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
i have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP . well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
I had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
I recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
