I am after help in that i would like to take hard drive, volume 27g from one laptop win xp pro, and place on another laptop 80g win xp home.I do have memory flash but only 256mb.I also think i will need to look at partioning drives do hope i get a reply/plural great support
View 8 RepliesI am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies View RelatedI am new to this site and I come here today to ask a question, perhaps someone here will be able to offer a bit of advice.I have a toshiba laptop, running xp pro sp2, 80GB hard drive.Hard drive inoperable due to bad sectors. My hard drive was partitioned into several sections with the C: section containing the os and the D: section containing my data. I could not boot my system so I tried reinstalling os on C: section again, it required a format. I formatted the C: section and then attempted to reinstall os, no luck!Using a third party diagnostic CD I see that my data on the D: partition is still available and intact. The diagnostic disk creates a makeshift os which allows for very limited manipulation of information on hard drive. Since I can not install os onto bad hard drive section C how can I transfer data from the section D: partition to either a new hard drive or to a storage medium?
View 3 Replies View RelatedI just got a laptop running XP home & my pc also runs XP home. I want to put a lot of date files on it, & some of them won't fit on a CD. Is there any way to conntect & send them with a USB cable?
View 4 Replies View RelatedI would like to transfer the data files off a CD onto my hard drive, then set the program that needs the data files on the CD to read from the files on the hard drive rather than the CD. My CD drive is getting a bit old, but I am unable at the present time to upgrade it.
View 3 Replies View RelatedI was wondering if there was a way to transfer the Program Files folder to the second disk withouth messing up the start path of those programs, and still be able to access them in the Start menu.
View 4 Replies View RelatedI bought a new laptop with Windows XP in it, I wanted to transfer some files from my Desktop PC which has Vista to my laptop with XP, I bought a Belkin USB Data Transfer Cable to transfer files with help of Windows Easy Transfer but when I installed the software provided with it, it seemed that I can only transfer files from XP to Vista.
View 1 Replies View RelatedMy laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
I have created a Bart PE bootable XP cd. I can boot into windows using this CD I would like to know how to copy the data in my hard disk to pen drive or flash drive.
View 11 Replies View RelatedI had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
View 3 Replies View RelatedA friend of mine has recently bought a new computer with Windows XP Home. Her old computer is a Window 98. She wants to transfer some files from her old one to the new one. I know that the Windows XP has a Files and Settings Transfer Wizard, but though I've done a search for that on the Microsoft site, I've not found any real information about the process. It does mention how to use floppies or other removable storage, but can this be done with USB cable, or something? If so, how would I hook it up? Will I see an option to choose to use a USB cable for the transfer in the Wizard? From the information I found, it does not even mention using a USB, but I find it hard to believe that one could NOT.
View 11 Replies View RelatedI can recovering my data from a hard drive I've recently corrupted . Whilst in the process of moving/renaming partitions I've managed to corrupt my harddrive which contains an xp operating system, four partitions and 150 gigabytes of movies etc. I've now installed xp on my other drive but it wont recognise the other one. Infact its not recognising the other disc or its patitions at all, even thru windows recovery 'chkdsk' where it just says disk it unformatted. Norton disc doctor at least recognised the disc as corrupted (and unformatted) and declares a bad partion table but is unable to fix it. I think my data is probably lost for good and I'm going to have to reformat
View 2 Replies View Relatedhard disk not work Recovering the data from damaged hard disk?
View 3 Replies View RelatedI'm having a little problem with my USB ports. I know they are USB 2.0 but are recognized as 1.0. Everytime I plug something in, it says "this device can run faster if connected to a 2.0 port" or something like that. Is there anyway to fix this, cause im transferring data very slowly and its very annoying. I tried to update the driver but it said there is no better or newer driver available.
View 11 Replies View RelatedI'm sure this has been covered many times, but I'm new to this NG and I just got a new computer with XP on it. The thought of transferring data from my old Personal Computer with SE to XP seems daunting. I thought I could hook up my old HD with a USB 2 external enclosure and transfer data that way. Would that work?
View 8 Replies View Relatedto transfer that data in another pc. But some reason my usb hard disk not working detecting on both pc in this way lost my all data. I want ask you can i recover CUT data from original hard disk? and How?
View 6 Replies View Relatedi have found that my little bro has accidentally formated my hdd and deleted partitions also then he created new partitions and installed XP. now is there any hope or a way that i can recover my previous data ????
View 10 Replies View RelatedI am having a problem with my 400GB HDD not displaying correctly - it displays as 127GB - in a new install of Windows XP on a seperate drive. My original setup was as follows:400GB SATA HDD with Windows XP as the Operating System plus Data - Single Partition - NTFS. 300GB SATA HDD with purely data - Single Partition - NTFS.I bought a new HDD today (SATA 320GB) and installed it in the PC. The original XP install saw it was installed and offered formatting options from Control Panel -> Administrative Tools -> Computer Management - no formatting options were taken.I then installed Windows XP (non-SP2 install, SP2 has been installed afterwards along with Video Card and Motherboard drivers) to the new HDD without removing the old drives first.
View 7 Replies View Related[spoiler][/spoiler]my hard disk chrashing my data to loset. how to recvery in my data
View 1 Replies View RelatedThis is the problem in which I'm currently in. I saved roughly about 15Gs worth of music and numerous pictures in my documents. Well since then I've changed the h.d, motherboard, and a few other things and installed a fresh copy of windows on the alternate h.d. well with the first h.d set as a slave and no means of going back to my original setup because i deleted most of everything on the h.d except a few folders it won't give me access to those folders. I'm wondering is there anyway of gaining access to those folder?
View 3 Replies View RelatedI have an EXTERNAL HD. I formatted it in FAT a few months ago. Ever since then, my laptop PC was unable to recognize the unit, but the Mac (which is not working right now, unfortunately) never had a problem with it. When I connect it to my laptop PC via USB, the USB icon shows up and the "USB Mass Storage Device Properties" says the "device is working properly." But the folder doesn't show up in My Computer, and diskmgmt.msc says the device is "Unallocated." Hopefully that doesn't mean the unit crashed because I have some stuff on there.Without losing the data (that should be on it, unless it crashed), I want to convert this thing to NTFS. I did some Google searching, but the instructions on how to do this (they say use convert.exe) aren't working. Moreover, no one mentioned how to convert an External, secondary HD.
View 11 Replies View RelatedIf i run fully recovered (all data in the first partition will be destroyed), can i have get my files back, because my computer keep restart with "registry file failure"?
View 1 Replies View RelatedI have a really old computer; not to sure what the system specs are like other than it being made by Tiny and having a 4 GB HDD. My mum wants to use the word processor now and then but the printer has broken and she would rather not buy another; partly because drivers may be an issue and partly becuase I have unused retail copies of Windows ME and 2000 that a couple of mates donated and can print off at my Dad's house.The issue with 98 is that I want to be using USB sticks when necessary to transfer word documents over to my Dad's computer running XP to print but 98 does not have the necessary drivers and I think it is impossible to get any; from what I understand that what 98 SE was for.
View 14 Replies View RelatedI'm currently running XP SP3. When I transfer files to the USB, the data will all turn out as corrupted.
Does anyone know how I can transfer my files from my desktop computer to my laptop without having to take the long way around by making a million CDs? My desktop seems to be on its last leg with all the error messages and since it won't let me download any upgrades without the oriignal disc, which I cannot find, it has not been been updated in a while. So, I want to move everything over to my laptop.
View 11 Replies View RelatedI am trying to use a USB Hard Drive to migrate some data between two computers running Windows XP Pro. I'm using the Windows XP files and settings transfer wizard. The drive shows up a local drive instead of a removable drive on the old computer. When I run the Wizard, it seems to do a quick job on processing the C: drive contents. Then it bogs down trying to also process about 30 GB of files that happen to all ready be on the external drive.
I started facing a problem recently with my 3 years old laptop GATEWAY MX6453.
I have looked in the forum, but couldnt find someone with the exact problem.
My laptop suddenly started to freeze (temporarily) when I try to load any application. The freeze time could take 2 to 5 min (while the hard disk led is lit solid). I cannot hear the hard disk sound during this freeze. I could move the mouse but cannot click on anything. It just stops responding for about 5 min before the application loads and works normally.
Thinkpad T41 with a OEM xp pro installed. This laptop is no longer usable, I would like to take the hard drive installed and install in another T41 with similiar configuration. I would assume XP will recognize the new laptop and cause problems.
View 7 Replies View RelatedThis old man has made a big mistake this time. I went and purchased a new retail version of Windows XP Home Edition sp2 for my newer computer which has a OEM xp
on it. Well i dont know what happened but i ended up installing it on my old p3 computer which i will hardley ever use anymore. My question is , can i somehow take it off the old computer and put it on my newer one? I have already activated it.
We are looking for a faster way to transfer user data to a new pc or hdd. We currently use winzip with wildcards to search the hard drive for specified file extensions. Depending on the number of these files a user may have, it can take over an hour or longer. This is mainly because of their .pst files (some have more than one and are up to the 2gb limit), that are on there harddrive and the network team will not let the .pst's reside on a network drive.What we do is either slave the old drive to the new or we'll map to shard drive on a pc connected to the network, we will start winzip having it search with the wildcards and create the zip file in a data folder on the new pc or hdd.
View 4 Replies View Relatedplease help me understand how to transfer my files/programs, etc. from my current Sony win. 98 with USB port but no CD burner, to a Dell win XP (yet to be delivered).i'd like to take as much as i can from my current machine into the new machine when it arrives.
View 7 Replies View Related