Now as you might know, Compaq pre-loads XP on a partition. I've done a clean re-install once by pushing F4, F10...one of the F?'s during startup. Someone on another thread mentioned that pressing the F(4, 10, ?) whatever is accessing the BIOS on the mobo, which is going to be shipped off the day after Christmas. Will I be able to reinstall XP from my SATA HD that it was loaded on from the factory?
View 6 RepliesTrying to do a completely fresh install of XP on a mates computer. I have booted from 2 seperate windows xp discs (both of which have worked fine previously). It gets a small way into the setup (just past RAID drivers etc) then asks "Please insert Windows XP Disk 2 or whatever (depending on which windows version) in Drive A: and press any key to continue." I have never had this happen before and am not sure how to get past it.
View 5 Replies View RelatedI've just built my first PC using a WD 3200JD SATA hard drive. When I try to install XP Pro the biggest partition size is 131069MB. Is this the limit for XP? If so, will I be able to create a new partition after I install XP on the 131069MB partition. By BIOS recognizes the drive as 320GB. I don't want to loose the remaining space on the drive.
View 2 Replies View RelatedSome old BASIC programs to run that's why I decided to install Win98 on the other partition of my hard disk.Is it possible to install 98 if I already have XP?
View 8 Replies View RelatedI need to get a new computer with W.XP. However, I have a couple of DOS programs I can't really give up. Can I run them on WXP? Or, can I "partition" the hard dive and install MS DOS, of which I still have a floppy copy. If all of this can be done, can I print the resulting output of these DOS programs onto my old dot matrix printer?
View 14 Replies View RelatedI have a computer that Im trying to fix, the only way to input to the computer at this point and time is the hard drives. I have a working computer obviously. So could I take the hard drive out of the broken computer, give it two partitions, copy the windows install to one partition, start the the install in the broken computer from that partition and install that onto the second partition? Ive heard of this being down but I am no expert.
View 3 Replies View RelatedI have two SATA drives on my machine. and want to start a software re-build. I swapped the cables on the drives, formated the second drive (as NTFS) and tried to load XP. When I select the partition to instal in it tells me that the drive partition is not Windows XP compatible, and I should return to the previous screen to make it so. That screen allows me to delete and create partitions, but a new partition comes up only as "raw". I can change it to NTFS in Disk Manager, but after doing so I still get the same message. I am able to transfer files to and from the drive and open them without problems, so the drive itself seems to be working.
View 2 Replies View RelatedI just installed XP on a new 106GB HD. Somehow I created a primary partition of 7.81GB letter I. That left me 141.23 GB of unallocated disk space. I've already installed my OS and most of my software and other peripherals. That's obviously used most of the 8GB of the primary. The unallocated part of the drive isn't assigned a drive letter so I'm hoping that helps me. I don't need a partition or if I have to have one a small one is fine. I thought the 8GB would be good for the OS with some extra, but I'm real concerned about all that unused space. I did a google and did learn about right clicking on the unallocated side and selecting new partition and taking it from there. I was just a little concerned about making a 2nd mistake. A little frazzled as this is all within 3 hours.
View 5 Replies View RelatedCannot get Partition Magic * to installon my Windows XP computer.
View 12 Replies View RelatedI'm wiping my laptop HD and starting fresh. I want to install DOS and XP, and I've gotten a lot of tips through searching old posts, but I still have a few questions. There wasn't much out there for this particular combination.First, equipment. I've got a Toshiba Satellite M55 with a 75 GB HD. I'm installing HP Home. I have no floppy drive. I'm also using a 250 GB USB external hard drive for backups and such. Partitions: What size for each? I was thinking I'd have one for DOS, one for XP and applications, and one for data, although I'm planning to store most of my non-essential data on the external. Is it beneficial to also have a separate partition for the swap file? I read a recommendation in another thread for a 30 GB volume for XP/apps and a 2 GB volume for the swap file with the rest allocated for data, but I didn't find any recommendations for MS-DOS volume size.
View 6 Replies View RelatedI installed gentoo on my primary hard drive and have boot, swap and root partitions on it and they take up the whole drive. I want to install windows on the secondary hard disk but it is saying it needs a compatible partition on the primary drive but it is already full!
View 8 Replies View RelatedHow do I make the second partition, which includes all files from another hard drive, pretend that it is the main partition? I want to simulate the second partition being my main one for a while.
OR
How do I resize system partitions?
I have my Windows format disc and I want to create another partition with it. I tried to create one, but it said something like "You have no more space to create another partition because you used up all your space on your Windows primary partition". See, when I reformatted my computer a while back I just created 1 partition for Windows and applied all the space onto that partition.
If there is a way I could remove some space off of my Windows primary partition and create another partition with the space I removed. I want to do this so I can put general things in my other partition such as documents, music, etc. and just leave the other partition for Windows and programs.
What are the steps needed to access one of my partitions, delete it, then use 1/2 the space and apply to system drive and the other 1/2 to another partition?
View 5 Replies View RelatedI bought a new computer.It appears to have been partitioned into a NTFS format and FAT32 format.The default drive for my documents & my pictures etc is the NTFS which I have been using happily. It is Media Centre Edition so I also have a few large files (>4GB) - though I dont keep them long term.NTFS partition has fulled up - but I cant move my large files to other partition to free up space
I've done a little bit of reading but my question is "Should I reformat the FAT32 to make it more of use to me?".I cant really see the need arising to access older OS files, except .JPG's (photo's I had on my old Windows ME Comp) or "Should I move all my smaller files (documents and photo's) to the FAT32 partition and use the NTFS drive for the bigger files?"
My hard disk arrangement is C(primary partition FAT32)for Windows XP
D(extended logical FAT32) for non-os data (movies, pictures etc..)
F(primary NTFS) for Vista..
I am formatting F: and then C: through XP installation CD
(and C->NTFS from FAT32)
is this ok???
will D: be accessible after installing XP on C???
I would like to know if it´s possible to take free space from an extended partition and redistribute it to a primary partition using partition magic 8.0..both partitions are NTFS
View 1 Replies View RelatedNow I am having multiple new problems. I want to completely erase the hard drive and install a new version of XP Home, not Pro. At the beginning of the installation process, it gathers system info. Immediately it responds with "no valid system partition" and the only option is to exit from the process. How can I get past this to complete the installation?
View 14 Replies View RelatedMy existing C: drive. First I was getting the "Error 983" error. Then I un-installed SP2 which was causing a gang of problems, freezing programs for a couple mins mostly. After I got it uninstalled I did a disk defrag, then a chkdsk /f. Now I have partitioned the drive using PM8 again and this time after the reboot it is telling me it is completed but once Windows XP reboots there is no new partition.
Im trying to install Suse Linux 9.0. But I really want to have 2 new partitions, one for Suse, and the other as a back up.
what are the steps to create partition using Paragon Manager?
View 1 Replies View RelatedI had perfectly working PC with XP Pro installed on a 160Gb Maxtor HDD.For no reason I error checked the hard drive, which the system did after rebooting, at the end of the test the system rebooted and announced that there was a error on the boot and boot.ini.Useing XP Emergency (on disk) I tried fixmbr which did nothing then I tried Fixboot. XP found the drive identified it as FAT and said that it was successfully fixed.The drive was FAT and is now unusable.Partition Magic sees it as a FAT drive as does XP when I switched the HDD into another machine.
View 4 Replies View Relatedi plan to format my computer again and this time i plan to split my primary partition before i format. When i go to format i want to format only the active partition with windows in it.I have two questions. This trick does work right? the partition i created in windows using magic partition 8 won't be formated along with the active partition right? I plan to backup everything on my second partition.When i created the second partition i had two options. to either make it a logical partition or a primary partition. I chose primary partition. would that work?i plan to install windows xp pro sp2.
View 8 Replies View RelatedOver a year ago when I setup my new system and before installing most of my APPS, I backed it up to a small HD. My Win Xp Pro MCE 2004 has become a little buggy (MY FAULT).How would I copy or clone the smaller HD over to my 80GB drive AND maintain the larger partitions? I have Ghost 2003 but I'm not sure if it permits me to set the partition size when copying HD's.
View 6 Replies View RelatedRecently I reinstalled the OS on my computer. It was shipped with Windows XP HE SP2, but I formatted and put Win98 onto the system. Needless to say, it froze up at the Windows splash screen. So, I uninstalled it and put XP back on. My question here is, is there any possible way to put Windows 3.1, Windows 95, Windows 98, and Windows XP all on one hard drive, and it work? I know how to partition the hard drive accordingly for the deed, it's getting the computer to actually run 95, 98, and 3.1. I'm cheating fate here, since I know 3.1 probably won't run on my 32-bit structure system, but it's worth a try. My system is a Dell Dimension 4700 with 3.0 gHz CPU, 256 mb of RAM, and an nVidia 64 mb video card.
View 1 Replies View RelatedI reinstalled my OS several months ago, and decided that I might want a dual boot in the future. I already had an old, smaller drive in the machine that's labeled the c: drive.
Reading one time that for security purposes it's good to have your OS on a drive other than C:, I decided to not alter the drive lettering.
I then partitioned a new internal hard drive into several logical drives. I formatted the D: partition as a Dos fat32 partition and the rest as NFTS partitions. Somehow, I allowed the D: partition to be the primary partition, while the E: partition which contains the Win 2000 Pro OS Winnt directory is a logical drive.
When I just checked disk management, I noticed that not only is boot.ini on the D: Dos partition, but so is ntldr along with the following Dos setup files:
ndetect.com
arcsetup.exe
arcldr.exe
I'm running Xp Pro SP2 & I need to redo the system. I have 2 Samsung 80gb hard drives but only one is currently in use.
What would be the best way to set them up for system speed, reliability & ease of back ups?
What sort of partitioning software do people have experience with ?
To reformat my computer now and i downloaded all the files i'd need to reformat and compressed them into a single rar file to put onto my d drive.
Although when i go to move theses filesonto my d drive i get a message saying: cannot copy "reformatfiles": There is not enough free disk space
Delete one or more files to free disk space, and then try again
Free space on this drive by deleteting old or unnecessary diles click disk cleanup.
I've just resized a partition on my main physical drive, and the OS sees the adjacent partition as unfromatted.
I'm using Partition magic pro 7 and WinXp pro.
The partition I resized is the primary OS partition which is formatted as NTFS, the adjacent partition is FAT32. How can I get XP to recognise the FAT32 partition again?
I decided to try Linux. 'Ubuntu' was my type selection. After trying by running off a CD I then decided that I would pick up some partitioning software like 'Partition Magic' or some software along that line to do the partition. But somewhere(s) I read that virtual or software partitions are less then a good idea for reasons I don't recall at the moment.
Is that true? If so, why and/or to what extent?
Is it possible to recover data from an external HD that I accidently deleted the partition and created a new one I just got a "new" computer - it's actualy a hand-me-down that I was trying to do a clean install of Windows XP on. I booted it up with the XP disk in the CD drive, and thought I was telling it to delete the existing partition and create a new one on the C: drive, but I didn't realize that it was also recognizing the external drive, which was already plugged into a USB port (why I even went ahead and plugged it in I don't know - that was stupid mistake It was the first one listed, and I thought it was telling me that there were two partitions on the internal drive, not two drives I also didn't pay attention to the size it was telling me the drive was (stupid mistake #2), I just told it to create a partition with the maximum possible size
View 4 Replies View RelatedI am having a partition problem I am having a machine with only one active partition i want to creat one more for the backup purpose
View 1 Replies View Related