Usb Keyboard Fails During Win Xp Reinstall
Sep 1, 2010
Hello, I have a very screwed up Win XP computer and am trying to reinstall XP from the CD. I changed the boot order to boot from CD and everything goes fine, files load etc. It asks a few questions during the loading which I answer and all goes fine. Then after it loads the files it finally asks 'are you sure you want to proceed' but at that point everything USB fails including the keyboard, so I can't tell it Yes to proceed. There is no other port to plug in an input device other than the 6 usb ports. Is there a way to get around this?
View 1 Replies
ADVERTISEMENT
Sep 1, 2010
I have a very screwed up Win XP computer and am trying to reinstall XP from the CD. I changed the boot order to boot from CD and everything goes fine, files load etc. It asks a few questions during the loading which I answer and all goes fine. Then after it loads the files it finally asks 'are you sure you want to proceed' but at that point everything USB fails including the keyboard, so I can't tell it Yes to proceed. There is no other port to plug in an input device other than the 6 usb ports. Is there a way to get around this?
View 11 Replies
View Related
Apr 8, 2010
I opened my computer this afternoon and the screen was full of malware saying my computer was infected and buy thier removal tool. I could not open any programs or even use the keyboard. I restarted in safe mode and did a system restore for 2 days ago and everything looks OK except the keyboard wont work. The lights come on but none of the keys will work. Some of the hot buttons work. I have uninstalled through the device manager and keyboard in control panel and restarted. There is a screen that says that computer has detected new hardware and so I want to install, I click yes reboot and it is still x'ed out in device manager and won't work. I did troubleshoot and get this."Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory.
View 5 Replies
View Related
Jul 4, 2005
Is it impossible to do a clean reinstall of Win XP with a wireless keyboard and mouse?I can boot to BIOS and edit my BIOS with my wireless keyboard, but I can't when I boot to the Windows install disk.Is there a work-around, other than pulling out my old keyboard and mouse?
View 3 Replies
View Related
Dec 3, 2008
I'm running XP Pro SP3 and have recently encountered a problem whereby both the mouse and the keyboard freeze the first time that the keyboard is used. (The system still seems to be running because it performs a normal shutdown when I hit the power button.) Googling suggested uninstalling the keyboard from device manager and then letting it reinstall; however, the add new hardware wizard fails saying that the device driver is corrupt or missing.How do I reinstall the keyboard drivers from the XP Pro CD? I've tried letting the hardware wizard search the cd drive, but it doesn't find anything.I think I had the same problem on my notebook, but I only solved it by reverting to an old Ghost image, because having to press Ctrl-Alt-Del to log on meant I couldn't even access the system with the mouse.
View 6 Replies
View Related
Oct 8, 2010
My intellimouse works correctly for awhile then double click fails. When this occurs the mouse control panel fails to open. Shutting down and restart corrects the problem-but only for awhile and then the same thing happens over again. I reloaded software to no avail. any help?
View 5 Replies
View Related
Jul 23, 2008
i have a HP Pavilion laptop [dv5117ci] with factory load XP Pro SP2and factory restore discs. the system became corrupted by a failed Win update.
it had multiple files showing bad, so rather than chase them one at a time for an unknowable number of days, I decided to create a new directory and install fresh copy of WinXP Pro
That looked like it was going to work but after being up on the initial boot, wobbly, for about 45 minutes, something caused a freeze, and I was toasted after that. Same routine again: bootup, get error "Windows failed to start because the following file is missing or corrupt"
View 6 Replies
View Related
Jan 30, 2005
I have a friends PC, a gateway P4 2.6, winxp home. The mouse and keyboard up and died. He had a kvm switch, the electronic kind when it stopped functioning. I have tried usb, ps2 everything. The keyboard works on bootup, so I can get into bios etc... but when it gets to the windows screen, nothing. No mouse or keyboard. Safe mode is the same thing. Dont want to format and reinstall windows. On that note, I did try a repair, when it asks for admin password it wont accept it. Says invalid admin password.. The password IS windows admin password though. With no mouse even in safemode, and windows not accepting my admin password during repair,
View 1 Replies
View Related
May 10, 2008
I just finished assembling my new build. It boots and I can get to the BIOS. I even have it booting from the DVD drive so I can load Win XP.However, when I get to the Windows Setup and it asks me if I want to setup windows(press enter), Repair(some other key), quit(F3) my keyboard won't work. I hit "Enter" because I want to install XP and nothing happens. It is not responding to my keyboard strokes.
This is strange because the keyboard works in the BIOS.
View 1 Replies
View Related
Mar 3, 2005
My friends keyboard is not working. When she turns the computer on no lights come up on the keyboard. Have tried another keyboard and still the same. Unable to get into the computer to check bios etc as there is a password on the account.
View 6 Replies
View Related
Dec 8, 2007
I reinstall Windows XP Home because My computer was messed up. It deleted all my files.. so on my desktop screen I don't have any Program Files Icons. BUT it still save my Files. I have my orginial files in my Documents folders and In my Program Files It has all the Programs and files that go with that program? How do I zap everything back on my desktop screen so I don't have to go Download each files as new again??? And I how do i get my Internet Favorite Links and my Notepad with my saved information in it? Yes I did try the "Start" and then program files and none of the programs are there.. BUT yet it is in my Program Hard drive C: Program files. with the Program and all it's content?
View 1 Replies
View Related
Jul 23, 2005
My Help and Support stopped working about the same time I installed the free utility GhostScript / Gsview so that I could view postscript files. I tried posting a question on another usenet newsgroup, but the answer of: click on install on the C:windowsinfpchealth.inf file - resulted in a search for the file dataspec.xml in the C:windowsinfi386 directory - Unfortunately, such directory does not exist on my C: drive. Furthermore, the "K:I386" directory of my Original Win XP Home CD does not contain any file named "dataspec.xm_ or .xml".And beyond that, I ordered a new Win XP SP2 CD, which just now arrived by mail - and there is no "K:I386" directory on that CD, nor does the CD apparently contain any file called "dataspec" (including dataspec.*).Another effort toward resolution occurred via another usenet post I read, which suggested opening the XP command line feature and executing a system status command, that displayed enabled services - I used that method, and switched the Help and Support service off and then on again. Such action did not in-fact enable the Help feature (including, of course restart), despite the indication that the Help and Support service was enabled. I am, and have been, running a purchased-CD version of Win XP Home, with a downloaded SP2 revision (I have not installed the new Win XP SP2 CD). Basically, I want to find out the means and methods for enabling my Win XP SP2 Help and Support feature, that apparently has been disabled or otherwise rendered inoperative.Is a reinstall of Win XP possible and the best choice? What are the other options?
View 2 Replies
View Related
Jan 22, 2008
Because of massive system porblems I have had t reinstall XP Pr with SP2. Before reinstalling XP I formmated the hard drives t give me a blank canvas to work. The reinstall worked fine but I cannot reinstall my Virgin Media Bradband service. Before the reinstall the bradband service was wrking fine..When I originall took out the bradband service it was through NTL. My cable modem states 'NTL' and the broadband disk has NTL' on it and I registered it tthough NTL. Now Virgin Media has bought up NTl annd I don't know if there is a compatibility prblem. Des somebdy else know?
View 1 Replies
View Related
Apr 5, 2005
I've been having some internet connectivity problems lately, and I believe it's due to some nasty spyware. I've already gone through all the steps to correct this (checking my DSL speed, anti-spyware scans, anti-virus scans, doing it all in safe mode, even reset my winsock.dll, etc.) but I'm still having problems with slow browsers. So now I think I'm faced with reinstalling Windows XP. My question is, should I do a format & reinstall, or is it better to reinstall Windows over my existing version? I have a Compaq Presario, and it comes with a Recovery CD.
View 14 Replies
View Related
Aug 28, 2008
I'm running Windows XP Pro SP2 and wanted to upgrade to the SP3 that's out. It showed up in Auto Updates, and I ran the install, but it failed. The system still runs ok, but I can't figure out how to get past the error. It tries to install the update KB946648, but fails with an access denied error. The SP3 install then back everything out and quits. How do I get past this error? I checked my update history, and it says that update KB946648 is already installed. Additional info: Tried running the update without the ZoneAlarm Fire wall off and Windows firewall on I also have Norton's AV. Any possibility of a conflict with one of these
View 11 Replies
View Related
Apr 15, 2005
I was given an old Gateway laptop computer with a 400 MHz Pentium processor and 256 kb of RAM, running Windows 98SE. I decided to upgrade it to Windows XP Home. The upgrade starts out fine, it checks the system, gives no error messages, and then begins to copy files. The hard drive and CD indicator lights flicker to indicate files are being copied, and there's the dotted scroll bar that scrolls from left to right on the screen to show you that there's activity going on. the hard drive and CD indicator lights stop flickering, it seems that files are no longer being copied from the CD to the hard drive. However, the dotted scroll bar on the screen keeps on scrolling from left to right. I have left it doing this for several hours; that scroll bar keeps on scrolling, but the installation process stops. The system doesn't hang, the file copying just stops. Win XP is never installed, and after reboot it reverts back to Win 98SE.
Instead of an upgrade, I tried wiping the hard drive, reformatting, and doing a clean install of XP, but it doesn't help. It gets to the same point in the setup, and just stops copying files. No error messages or any indication that anything is wrong. I have tried installing Win XP on at least 10 different occasions, but no success.
View 2 Replies
View Related
Jan 11, 2005
Sequence of events: Win XP Home SP 0 problem began with spyware, which I removed [ using spybot 1.3, ad-aware SE, HiJackThis 1.99, CWShredder, About:buster I tried to update to SP1, from the Windows update site, as well as from a Win XP SP1 update disk, but received an error. In Event Viewer, Windows Update Agent, Event ID 20, so I renamed C:Windowssystem32catroot2 to c:windowssystem32old_catroot2, & retried the SP1 installation. Re-ran SP1 setup / installation, which results in this error: Service Pack 1 Setup Error The file c:program filescommon filessystemole dbmsdasql.dll is open or in use by another program.Start > run > javascript:navigator.appMinorVersion results: Q823353;Q832894;Q867801
View 1 Replies
View Related
Aug 24, 2005
When using "backup" it fails if the shadow copy option is ticked. I'm using XP SP2.
View 1 Replies
View Related
Jul 19, 2008
I'm running windows XP a dell desktop that's a few years old. I was away from home for six months, and before i left i powered my computer down--and now that i'm home, it fails to boot. When i power it on, a few seconds after it will begin to continually beep. they're long, but spaced apart.. after a while, it will just hold the beep as a solid tone. It will normally get loading screen of windows XP (the black one that has the bar and shows the windows logo), and that's when the screen will just go blank and it holds the beep.
I don't get any errors or messages during the startup, and if i enter the bios settings as it's beginning to boot, it will not begin to beep or turn off.
View 13 Replies
View Related
Apr 26, 2008
I am a new user to this site and I am moderately computer literate and have a basic knowledge of my system.
It's a Gateway PC running on Windows XP with a Pentium 4 Processor, as for the base specs I'm not quite sure, but I know they are lower than my laptops specs are.Just today when I got home from work my parents had started to worry about the PC, they would start it up and then wait for it to boot as usual, but this time it started to turn on and wouldn't do anything from there, it would just sit at the loading screen and not even get to the loading bar or welcome screen it's self.So I tried a couple of reboots to see if that would help and it did not, so I picked up my OS install disc to force a reboot or to repair the system, I can restart it but it does the same thing even with the OS disc inside the tower, it doesn't even read it at all.I'm not too sure what else to do at this point, if there are any other suggestions please provide them, if you have further questions to ask me, I'll try and answer them to the best of my ability.
View 6 Replies
View Related
Apr 10, 2008
I'm currently trying to install a fresh copy of windows xp. everything goes smooth until windows enters its setup and the computer stalls at "approximate Time Remaining: 39 Minutes" then turns completely off. It did this to me the last time i reinstalled windows but removing one of my sticks of ram fixed it. This time that hasnt worked nor swapping out any pieces, only ones i havent are my hd, mb, and psu. No error is displayed before shutting off.
View 14 Replies
View Related
Oct 13, 2006
Somehow or other I've deleted two DLLs that prevent Windows XP from booting up.These are ODBC32.DLL and MSGINA.DLL - I get two seperate error messages saying they are missing and then the PC tries to reboot again.
I have tried booting in safe mode and get the same problem.I have a recovery CD but wish to avoid reinstalling windows and all that entails. I have found reference and source elsewhere to booting from startup floppy discs but have no access to a PC with a disc drive to create them.Is it possible to create a boot CD for windows XP or can anyone suggest another solution?
View 7 Replies
View Related
Aug 9, 2005
Is there some way to understand what fails and why xp hang up on the latest closing screenù?
View 5 Replies
View Related
Dec 26, 2006
I have tried to use the Remote Assistance facility between two Virtual PCs. Both the virtual PCs can connnect & share files - indeed the remote desktop facility works well. Both are set up in a peer-to-peer setup. When I try a remote assistance, the expert computer tries to log in using the HelpAssistant account - but fails. (The remote assistance request is a file placed in a shared folder.) The expert machine waits on a response from the novice (the novice machine doesn't show any please connect dialog boxes) befor eautomatically closing the connection.
View 3 Replies
View Related
Aug 1, 2007
I have a peculiar problem. I can download windows updates, But the installation fails. I did everything what i could do. But no success. I am using IE 7 with Norton internet security suite 2007 (Automatic windows update option enabled in it).
View 5 Replies
View Related
Jul 15, 2008
Installing either Windows 2000 SP4 or SP3 on my Windows 2000 SP2 pc results in error that the Windows Installer is not digitally signed. Clicking the "OK" button results in "An unexpected error occured" and the setup fails. Thinking maybe it's an oudated Windows Installer - "Msiexec.exe" is the cause, installing Windows Installer 3.1 Redistributable (v2) results in error saying it needs SP3 and thus also fails. Downloading from Microsoft SP4, SP3 sites, saving it on my pc and then executing them results in "SP4 (or SP3) Setup determined that the following downloaded SP4 (or SP3) files are corrupt"- showing a whole list of of them.
View 4 Replies
View Related
Nov 6, 2008
I recently went to upgrade my computer and it keeps failing when it comes to the following updates:These are all windows media player related (going by the update description) and i tried reinstalling the media player with no joy.My system is Lenovo T60centrino duo 1.83 GHz504MB RamWindows XP with service pack 3. Any info would be great. The updates installed fine on my other computers so I'm not sure what the problems are. I have searched the web and not found a similar situation anywhere...
View 14 Replies
View Related
Aug 7, 2007
When i try to update windows its fails!! what i do is i run windows update and when its done/time to restart it says the updates failed what do i do ?
View 8 Replies
View Related
Mar 27, 2008
I recently somehow ended up with virusheat on my computer, but the real problem came when i got rid out it. I first tried using spybot and adaware to delete the virus, but that didn't seem to work and i eventually just tried to uninstall it. When I clicked uninstall, it seemed to also delete many of my other programs and scambled the locations of many links. now many programs, like mozilla, doesn't work. Everytime i tried to do something, i got the BSOD. I eventually got rid of Virusheat and the BSODs with malwarebytes', but I still do not have all of the stuff Virusheat deleted. So that when i tried to system restore my comp. That doesn't work, even in safe mode; I just get the "no changes have been made to my system" thing after the system restore reboots my comp. I don't have Norton on my comp, as far as i know (I can't really cheack because search stopped working). My system restore is definetly on and i have many different restore points prior to the virus. I need to know if there is a way to return my comp to the state it was in, before the infection
View 14 Replies
View Related
Mar 20, 2010
I have tried several times to run the Acrobat Reader 9. But it always fails. It says the programme configuration is incorrect, reinstallation may solve this. I have reinstalled it several times, but of no use.
Presently I am managing with " FOXIT" reader. It is also OK. No problem with it. But some documents need only Acrobat. There the problem arises.
View 15 Replies
View Related
Nov 26, 2006
I'm not sure this is a well-known problem or not but it does happen to me and it's bugging me all the time. I need help! Everytime I try to restart my computer from a perfect shut-down, the log-on screen won't appear and I'll be sticking my eyes to the loading screen. But after sometime maybe in 2 or 3 hours, the log-on screen will appear when u restart the computer again. The safe mode can be accessed and it's working just fine.
View 6 Replies
View Related
