2000 SP4 Or SP3 Setup Fails
Jul 15, 2008
Installing either Windows 2000 SP4 or SP3 on my Windows 2000 SP2 pc results in error that the Windows Installer is not digitally signed. Clicking the "OK" button results in "An unexpected error occured" and the setup fails. Thinking maybe it's an oudated Windows Installer - "Msiexec.exe" is the cause, installing Windows Installer 3.1 Redistributable (v2) results in error saying it needs SP3 and thus also fails. Downloading from Microsoft SP4, SP3 sites, saving it on my pc and then executing them results in "SP4 (or SP3) Setup determined that the following downloaded SP4 (or SP3) files are corrupt"- showing a whole list of of them.
View 4 Replies
ADVERTISEMENT
Aug 4, 2007
I was told to reinstall windows 2000 aon a C800 I was given. I stopped with an erroro reading line 3221166496 hivedef.inf corrupted. Setup cannot continue.
View 3 Replies
View Related
Apr 10, 2008
I'm currently trying to install a fresh copy of windows xp. everything goes smooth until windows enters its setup and the computer stalls at "approximate Time Remaining: 39 Minutes" then turns completely off. It did this to me the last time i reinstalled windows but removing one of my sticks of ram fixed it. This time that hasnt worked nor swapping out any pieces, only ones i havent are my hd, mb, and psu. No error is displayed before shutting off.
View 14 Replies
View Related
Jun 8, 2005
I have two hard drives, both of them with Win 2000 Pro. The First has been the master in machine one from the start. The second HDD has been in machine twoand that machine has crashed so bad that it is not worth the time, energy or money to fix it. This second HDD has important data on it that is only accessable through older programs that are only on this drive. (It is a church membership data base program and a church financial record program) I have the added problem that no one in the office has a clue where the install disk are for these programs and they are not where they are suppose to be (this was before my time). I would like to place the second HDD in the first machine and set up a dual boot so the user can choose which drive to operate from. There is the added problem that the computers only have a restore disk that came from Dell and not a full Win 2000 Pro CD.
View 4 Replies
View Related
Feb 2, 2007
I am trying to install XP on my 2000 but it says: Windows XP Setup does not support upgrading from Microsoft Windows 2000 Professional to Microsoft Windows XP Professional.Setup cannot continue.Do i have to reformat my HD? Do i have to reinstall everything on my HD some stuff i dont have the cd any more.Like Office 2003.
View 12 Replies
View Related
Oct 8, 2010
My intellimouse works correctly for awhile then double click fails. When this occurs the mouse control panel fails to open. Shutting down and restart corrects the problem-but only for awhile and then the same thing happens over again. I reloaded software to no avail. any help?
View 5 Replies
View Related
Jul 23, 2008
i have a HP Pavilion laptop [dv5117ci] with factory load XP Pro SP2and factory restore discs. the system became corrupted by a failed Win update.
it had multiple files showing bad, so rather than chase them one at a time for an unknowable number of days, I decided to create a new directory and install fresh copy of WinXP Pro
That looked like it was going to work but after being up on the initial boot, wobbly, for about 45 minutes, something caused a freeze, and I was toasted after that. Same routine again: bootup, get error "Windows failed to start because the following file is missing or corrupt"
View 6 Replies
View Related
Aug 20, 2005
I've setup Windows 2003 fax services on a W2K3 server and shared the device. I've tested faxing from Word on my PC and it works fine.However, when other users try to install the fax client, the setup hangs asking for the fx* setup files. I've tried different XPSP2 CDs, copying the files to a local directory, making sure that the users have local admin rights (and even domain admin rights) but to no avail. The files are already in the system32 directory so in theory the setup doesn't even need to copy them. Even if I delete them, it doesn't work.Our corporate SMS team reckons that there isn't any policy which could
cause the problem.
View 1 Replies
View Related
Dec 4, 2006
I started an upgrade for xp pro part way through the install I got a message "WatchDriverSigningPolicy.exe" no found I pressed enter then got another message "fake setup call himself instead original "setup.exe" ; setup abort!" now each time I reboot it starts to load xp then gives me the same message then press enter it then reboots.
View 3 Replies
View Related
Jun 3, 2005
Im installing a brand new pc and I just downloaded all the latest fixes and patches for the OS and the Browser.except one, KB890923. Everytime I try to launch through Windows Update it says it cant do it. SO I attempted to download and run it manually and it states that the program is not a valid Win32 application.
View 1 Replies
View Related
Aug 17, 2007
Am I right in thinking that they are both pretty similar except that server has support for multiple processors and extra network related tools and facilities. The reason I ask is that if a piece of software works on Windows 2000 server, is it extremely likely that it will work on Windows 2000 professional too? As a bit of background information: I work for a small company which supplies temperature monitoring equipment which needs to be networked. I've been told that it has been tested on Windows 2000 server but not on Window 2000 professional.
View 1 Replies
View Related
Feb 24, 2008
I mistakenly launched XP Setup and want to know how to stop it from progressing further. I have another XP installed on another virtual disk. Rebooting from there allowed me delete the Setup files. Or so I thought ! The main XP installation however continues to try to launch Setup. Just about whatever I do, it ends in tears. My question is how do I stop XP on this disk from thinking it has to launch Setup? I dont want to reinstall XP, as that will involve a huge amount of work to recreate my environment.
View 6 Replies
View Related
Oct 29, 2008
i am trying to install windows office 2007 but after a minute from start of installation ,it popup dialog box saying setup can not find setup.exe file and say browse valid installation source and click ok.
I don't know whats happening.I have just formated my C drive and installed fresh copy of windows xp.
here is image of error message.
what should i do?
http://img101.imageshack.us/my.php?i...9005582dv8.jpg
View 2 Replies
View Related
Aug 28, 2008
I'm running Windows XP Pro SP2 and wanted to upgrade to the SP3 that's out. It showed up in Auto Updates, and I ran the install, but it failed. The system still runs ok, but I can't figure out how to get past the error. It tries to install the update KB946648, but fails with an access denied error. The SP3 install then back everything out and quits. How do I get past this error? I checked my update history, and it says that update KB946648 is already installed. Additional info: Tried running the update without the ZoneAlarm Fire wall off and Windows firewall on I also have Norton's AV. Any possibility of a conflict with one of these
View 11 Replies
View Related
Apr 15, 2005
I was given an old Gateway laptop computer with a 400 MHz Pentium processor and 256 kb of RAM, running Windows 98SE. I decided to upgrade it to Windows XP Home. The upgrade starts out fine, it checks the system, gives no error messages, and then begins to copy files. The hard drive and CD indicator lights flicker to indicate files are being copied, and there's the dotted scroll bar that scrolls from left to right on the screen to show you that there's activity going on. the hard drive and CD indicator lights stop flickering, it seems that files are no longer being copied from the CD to the hard drive. However, the dotted scroll bar on the screen keeps on scrolling from left to right. I have left it doing this for several hours; that scroll bar keeps on scrolling, but the installation process stops. The system doesn't hang, the file copying just stops. Win XP is never installed, and after reboot it reverts back to Win 98SE.
Instead of an upgrade, I tried wiping the hard drive, reformatting, and doing a clean install of XP, but it doesn't help. It gets to the same point in the setup, and just stops copying files. No error messages or any indication that anything is wrong. I have tried installing Win XP on at least 10 different occasions, but no success.
View 2 Replies
View Related
Jan 11, 2005
Sequence of events: Win XP Home SP 0 problem began with spyware, which I removed [ using spybot 1.3, ad-aware SE, HiJackThis 1.99, CWShredder, About:buster I tried to update to SP1, from the Windows update site, as well as from a Win XP SP1 update disk, but received an error. In Event Viewer, Windows Update Agent, Event ID 20, so I renamed C:Windowssystem32catroot2 to c:windowssystem32old_catroot2, & retried the SP1 installation. Re-ran SP1 setup / installation, which results in this error: Service Pack 1 Setup Error The file c:program filescommon filessystemole dbmsdasql.dll is open or in use by another program.Start > run > javascript:navigator.appMinorVersion results: Q823353;Q832894;Q867801
View 1 Replies
View Related
Aug 24, 2005
When using "backup" it fails if the shadow copy option is ticked. I'm using XP SP2.
View 1 Replies
View Related
Jul 19, 2008
I'm running windows XP a dell desktop that's a few years old. I was away from home for six months, and before i left i powered my computer down--and now that i'm home, it fails to boot. When i power it on, a few seconds after it will begin to continually beep. they're long, but spaced apart.. after a while, it will just hold the beep as a solid tone. It will normally get loading screen of windows XP (the black one that has the bar and shows the windows logo), and that's when the screen will just go blank and it holds the beep.
I don't get any errors or messages during the startup, and if i enter the bios settings as it's beginning to boot, it will not begin to beep or turn off.
View 13 Replies
View Related
Apr 26, 2008
I am a new user to this site and I am moderately computer literate and have a basic knowledge of my system.
It's a Gateway PC running on Windows XP with a Pentium 4 Processor, as for the base specs I'm not quite sure, but I know they are lower than my laptops specs are.Just today when I got home from work my parents had started to worry about the PC, they would start it up and then wait for it to boot as usual, but this time it started to turn on and wouldn't do anything from there, it would just sit at the loading screen and not even get to the loading bar or welcome screen it's self.So I tried a couple of reboots to see if that would help and it did not, so I picked up my OS install disc to force a reboot or to repair the system, I can restart it but it does the same thing even with the OS disc inside the tower, it doesn't even read it at all.I'm not too sure what else to do at this point, if there are any other suggestions please provide them, if you have further questions to ask me, I'll try and answer them to the best of my ability.
View 6 Replies
View Related
Sep 1, 2010
Hello, I have a very screwed up Win XP computer and am trying to reinstall XP from the CD. I changed the boot order to boot from CD and everything goes fine, files load etc. It asks a few questions during the loading which I answer and all goes fine. Then after it loads the files it finally asks 'are you sure you want to proceed' but at that point everything USB fails including the keyboard, so I can't tell it Yes to proceed. There is no other port to plug in an input device other than the 6 usb ports. Is there a way to get around this?
View 1 Replies
View Related
Oct 13, 2006
Somehow or other I've deleted two DLLs that prevent Windows XP from booting up.These are ODBC32.DLL and MSGINA.DLL - I get two seperate error messages saying they are missing and then the PC tries to reboot again.
I have tried booting in safe mode and get the same problem.I have a recovery CD but wish to avoid reinstalling windows and all that entails. I have found reference and source elsewhere to booting from startup floppy discs but have no access to a PC with a disc drive to create them.Is it possible to create a boot CD for windows XP or can anyone suggest another solution?
View 7 Replies
View Related
Aug 9, 2005
Is there some way to understand what fails and why xp hang up on the latest closing screenù?
View 5 Replies
View Related
Dec 26, 2006
I have tried to use the Remote Assistance facility between two Virtual PCs. Both the virtual PCs can connnect & share files - indeed the remote desktop facility works well. Both are set up in a peer-to-peer setup. When I try a remote assistance, the expert computer tries to log in using the HelpAssistant account - but fails. (The remote assistance request is a file placed in a shared folder.) The expert machine waits on a response from the novice (the novice machine doesn't show any please connect dialog boxes) befor eautomatically closing the connection.
View 3 Replies
View Related
Aug 1, 2007
I have a peculiar problem. I can download windows updates, But the installation fails. I did everything what i could do. But no success. I am using IE 7 with Norton internet security suite 2007 (Automatic windows update option enabled in it).
View 5 Replies
View Related
Nov 6, 2008
I recently went to upgrade my computer and it keeps failing when it comes to the following updates:These are all windows media player related (going by the update description) and i tried reinstalling the media player with no joy.My system is Lenovo T60centrino duo 1.83 GHz504MB RamWindows XP with service pack 3. Any info would be great. The updates installed fine on my other computers so I'm not sure what the problems are. I have searched the web and not found a similar situation anywhere...
View 14 Replies
View Related
Aug 7, 2007
When i try to update windows its fails!! what i do is i run windows update and when its done/time to restart it says the updates failed what do i do ?
View 8 Replies
View Related
Mar 27, 2008
I recently somehow ended up with virusheat on my computer, but the real problem came when i got rid out it. I first tried using spybot and adaware to delete the virus, but that didn't seem to work and i eventually just tried to uninstall it. When I clicked uninstall, it seemed to also delete many of my other programs and scambled the locations of many links. now many programs, like mozilla, doesn't work. Everytime i tried to do something, i got the BSOD. I eventually got rid of Virusheat and the BSODs with malwarebytes', but I still do not have all of the stuff Virusheat deleted. So that when i tried to system restore my comp. That doesn't work, even in safe mode; I just get the "no changes have been made to my system" thing after the system restore reboots my comp. I don't have Norton on my comp, as far as i know (I can't really cheack because search stopped working). My system restore is definetly on and i have many different restore points prior to the virus. I need to know if there is a way to return my comp to the state it was in, before the infection
View 14 Replies
View Related
Mar 20, 2010
I have tried several times to run the Acrobat Reader 9. But it always fails. It says the programme configuration is incorrect, reinstallation may solve this. I have reinstalled it several times, but of no use.
Presently I am managing with " FOXIT" reader. It is also OK. No problem with it. But some documents need only Acrobat. There the problem arises.
View 15 Replies
View Related
Nov 26, 2006
I'm not sure this is a well-known problem or not but it does happen to me and it's bugging me all the time. I need help! Everytime I try to restart my computer from a perfect shut-down, the log-on screen won't appear and I'll be sticking my eyes to the loading screen. But after sometime maybe in 2 or 3 hours, the log-on screen will appear when u restart the computer again. The safe mode can be accessed and it's working just fine.
View 6 Replies
View Related
Jan 26, 2008
I needed to do (and did) some repairs to XP. Most things work, but limited sound.
I tried to upgrade XP using help and support. I need 87 upgrades and they all FAILED.?
View 11 Replies
View Related
Apr 18, 2008
I dropped my laptop the other day. It kept working at first, but crashed a couple of hours later. Now, when I boot-up, I get the following error message:"Windows could not start because the following file is missing or corrupt: System32/Drivers/Ntfs.sys. You can attempt to repari this file by starting Windows Setup using the original Setup CD-ROM. Select 'r' at the first screen to start repair."I've inserted the setup CD (in an external CD-Rom drive, since my laptop doesn't have its own drive). But for some reason, setup won't start, and I keep coming back to the above error message. How do I start setup?
View 12 Replies
View Related
