i am having a problem with windows xp not reading my full system memory it is in the bios but windows just one day decided to stop reading a full one gig instead it decided to read 256 megs of ram i've replaced the memory sticks five times now and i know i havent baught that many bad sticks of memory is there any way i can get windows to read the memory since i know the memory has to be good since the bios is reading the full memory i've even the a f-disc and reformat thinking that would fix it
Should I ever use one of the utility programs to wipe my hard drive completely, how do I reinstall Windows XP since the CD driver has been erased? How can you reinstall an operating system that is on CD when you have no driver for the CD player? The reason I am asking these questions is that I might want to give my computer to friend and I want my stuff off of the hard drive and my friend to be able to use the computer.
I desperately need my laptop to work and I've run into this grave problem. When I came home today, my laptop wouldn't start properly and it would say "No Operating System Found" on a black screen after seemingly trying to load for a while. The laptop had a weird whirring sound that wasn't present before. I have a Sony VAIO PCG-K23.
I have a laptop which after I purchased it and installed my own backup utility and created an image. I then started my windows xp home eddition with the cd and went to the section to redo the partitions. I deleted the partion for the recovery however after doing so it is not shown as unpartiton space. The system should have 80 gb hard drive however the statement above the partion says only 75gb is available to use. This is the same total as on the control panel / disc management. How can I get XP to recognize the entire hard drive space?
Two weeks ago I installed win7 on my system,but 3 days ago,bacause of some problems,I decided to uninstall it and to setup an older version.But unfortunately I had many problems to setup another one.Although I had the related DVD in DVD drive,after some seonds it asked for the DVD labeled Win XP.Anyhow finally I could setup win XP 2002,but windows only recognizes drive C with capacity of 100GB and I don't have my other drives as before.For your information it's NTFS.I decided to setup Win7
I am using Intel pentium 4 cpu 2.40GHz, 1.25 GB RAM. Iam using 80 GB samsung hard disk. I installed Microsoft Windows XP Professional service pack 2 on a drive of 10 GB memory space with NTFS file system. After the installation of Win XP, the drive properties shows 4.9 GB of used memory and only 4.45 GB of free memory, but when I try to find total memory occupied for all the files in that drive (using "select-all" and properties) the used memory is only 2.3 GB only.
Now I don't understand the huge difference of this memories calculations. Where that extra used memory gone, when the total memory occupied by all the files is much less.
The XP Home System Restore has not and will not work since I installed the XP Home OEM ~2 years ago. I found an article at this site but did not write the file it told me to look for in msconfig. I looked for it there originally, after reading the article but could not find it in msconfig? What files have to be "turned on" in msconfig to have "System Restore" work? All settings that I have looked at (hard drive etc.) say that system restore is "on" and working but it will not let me create a restore point, and does not recognize any past "restore points" because they have not been created? Is there a "fix"? Let me know. If there is supposed to be a file in msconfig on the start tab, what is it and how do I get it there.
Trying to help a friend whose XP system is running very slowly, it does not recognize any usb ports and will not connect to the internet. She is anxious to retain her photos. As she can't put any software on the system to check for viruses etc, the only thing I can suggest she does is to re-install XP. If she does not reformat the disk will her user data still be accessible?
Dialog box with Event Log Services - System log is full. It looks like the Disk is full and I can't find anything to remove until I talk to the user. How do I address this message.
I'm creating a .bat to run a backup job and it keeps failing. The event log says that no media was specified. The job works fine if I load it to the GUI. The 4mm DAT drive is specified in the GUI but that doesn't seem to carry over to the command line. In the end all I want is a full C: backup and the system state, overwriting whatever tape is in the drive. This is the command from the .bat
ntbackup backup "@c:ackupserver.bks" /m normal /v:yes
I just performed a full system scan on my computer using AVG Spyware. The process (doing nothing else and having no other programs running) took 35 minutes and scanned 245,000 + "objects". My question is simple, and may leave me looking foolish, but I have to ask...is it "normal" for a computer used by only 2 people for only 3 months to have that many "objects"?
I am in big trouble. I have an hp pavilion a206x- and oldie. The kids gunked it up and it was so slow and running out of memory. Add/remove programs did not help. I decided to use the recovery disks and start with a clean slate. I backed up what we needed on cds and did a full recovery after doing the ctrl backspace option 6 to erase the hard drive. (oh, btw, it is XP) After all six disks, it freezes. I get to the screen that says "Recovery in progress." with Finalizing recovery highlighted in red on the left. Chatted with HP tech and there are no other recovery disks available because it is so old. I don't want to put any money into it. She says repair or retail OS purchase only options.
HP MEDIA CENTER COMPUTER WITH XP. I noted the D disk, labeled as HP RECOVERY DISK when I click MY COMPUTER is 96% full. Is there a way to delete some of these files,do I need this much space tied up?
I have 3 drives:(1) 1 x 80GB drive with my full backup .(2) 1 x 80GB drive with my unfixable Windows + personal data.(3)1 x TB drive with 1 partition with Windows XP.I have a full back up of a Windows (1)Done prior to Windows becoming unfix able.Now I have a new Windows installed on a new drive (3)wondering how to restore that backup to replace the new Windows so as to save settings, data etc.I intend to upgrade to Vista as soon as the back up is completed if that is possible hopefully.
Im fully aware of why one would'nt be able to get Windows XP to use a full four gigabytes of memory but I thought I had taken the appropriate steps to remedy the problem. Im using the 64-bit version of Windows XP Pro and I've enabled memory hole remapping in my motherboards BIOS but for whatever reason windows is still telling me im only using around 3GB of memory. What am I doing wrong?
Running Windows XP, SP2. If I plug in my camera or mini-USB drive, the speaker makes that ding-dong sound, but that is it. Nowhere else can you tell that the device is found. This all worked a few months ago. Not sure what happened. I've tried multiple devices, cables and different USB ports, all the same. Does not show drive or camera on My Computer. Device manager says all is working fine. Drivers seem ok.
I've had a lot of trojans and meltdowns and have reformatted 438545769 times (I have just finished reformatting again. I used to have ZoneAlarm and AVG until I sat and watched as they let a trojan just come on in and munch up all my files. Right now I just want a *stable* computer.
I just had Win XP Pro installed on my machine. Primary HD is 80 GB. The drive previously ran Win 98 SE. The tech formatted it and installed Win XP Pro. System runs fine and all appears to function OK. However, the drive capacity is not accurately displayed anywhere in the system (other than BIOS). I'm trying to find out how I can have the drive space accurately displayed.
computer failed to reboot. I used a boot disk to get started. I then noticed that the system does not recognize the drives C (where my Windows XP OS is installed) or D drive which is a seperate physical drive for my data.
I'm connecting a 30GB Travelstar Hard Drive via an external USB 2.0 case to my Thinkpad T40 with Windows XP (pro). Windows immediately recognized it. However, the hard drive does not show up under Windows Explorer. I can go into Device Manager, click on Disk Drives, and it does show the new drive there (along with my main hard drive, which is a 80 GB hard drive).
I cannot figure out how to make it show up in Windows Explorer with an Drive Letter assigned to it and thus, how to actually use it.
I have a IBM T40 laptop running WinXP SP2. I have been using this machine for many years, including it's 2 USB ports. Some time ago, I experienced that I had to reconnect my external USB Lacie drive many times before my computer would recognize it. I would get the message that "Windows doesn't recognize the device", but reconnecting it again and again would eventually get it to work.But now things got worse. I can no longer use the USB port on my cable modem (Motorola) because it is never recognized, and the external drive is also never recognized.
Not sure what has happened here. Toshiba Laptop M70 WinXP home SP2.Initial issue Unabel to read files off the DVD/CD Matshita DVD-Ram UJ-8415 When checking "System" Hardware there is a yellow caution ! beside it indicating an issue.Action: Uninstalled device and rebooted to let windows find appropriate driver. System said found new device and identified it by name. But still the trouble indicator.Tried a couple of things to no avail.I have the toshiba - product recovery disk but I cannot access it due to the DVD error. so I attached my external DVD (usb) device Thinking I could load the disk in it and recover the drivers or what ever. My Freecom DVD now has a Trouble indicator on it as well. so it appears that the devices won't recognize.(tried to instal again - system recognizes it initially then show the trouble indicator again.
I just installed Gangsters, a game I bought today, and when I tryied to play it right after installing it,it gave me this message:"Sorry Unable to initialize CD Player.Please make sure that no other application is accessing the CD."What does this mean?
I installed windows service pack 1 for windows xp and now my cd and dvd drives aren't recognized and I lost sound in my speakers. I got a code 39 error. The fix in windows support is useless
Could anyone tell me how to change the name of a user account so thatthe folder in 'Documents and Settings' for that user changes also,aswell as any other system references to that user. The chimps at thecomputer store made the account name 'sihdigc', which is justridiculous. I've set everything up on this account and don't fancyhaving to make a new one, I'd just like to know how to change the username properly.
For some strange reason my Start Menu items/shortcuts have been deleted (in both my Documents & Settings folder and 'All Users'), except for a blank shortcut (no name, no link) with the 'My Computer' icon. The weird thing is the Start Menu folders and their contents are in tact.Initially I thought I accidentally deleted them so I manually created a few shortcuts back to some of programs, but after restarting Windows, they were gone again and only that mysterious blank shortcut appeared again!I did a full system scan with Norton AntiVirus 2007 and AVG Anti-Spyware and they didn't find anything.
I have an HP computer that only has the system recovery disc and not the full xp disc. SP2 came with the install. I have an XP disc just with SP1a can I do a repair install with that and then just install SP2 after?
At first I thought it was BIOS not autodetecting my HDrive capacity. But in the setup screen it indicates the correct size.However, in WindowsXP-My Computer, it still says my harddrive is 20GB rather than 40GB.
my hard drive was going bad so i bought a new one. With my old hard drive still connected to my computer, i installed my new hard drive, and formatted windows xp on it. Everything was running well, until i removed my old hard drive from my computer and whenever i boot up my computer with my new hard drive, i get an error saying "No device found, please insert a boot disk and press any key". the only way i could boot into windows xp of my new hard drive is by a boot disk i created from another computer. Is there any way that i can boot into XP without always having to use a boot disk?
I have two almost identical (one of them has only 40Gb drive) Dell 8400 computers that worked very well together networked till yesterday. Both of them have same OS version including updates.I had to do a PC restore on computer A and since then Computer B doesn't recognize computer A. I went through Network Wizard, made sure the computer names are unique and the workgroup name is identical on both machines. Computer B doesn't even show local shared directories anymore.Computer A finds computer B without any problems.BTW, Computer B works fine otherwise; I can access Internet, a network drive without any problems. I did hardware ping test and board test and they all pass.
