I have an HP computer that only has the system recovery disc and not the full xp disc. SP2 came with the install. I have an XP disc just with SP1a can I do a repair install with that and then just install SP2 after?
View 6 RepliesI lost my system recovery disc. I also lost all of my games that came with windows...free cell, solitaire, paint..etc. I just want those back. Can I run a system recovery program on windows without a disc
View 1 Replies View RelatedMy XP Home recovery disk will not install or repair anymore (the last few days I did have it up and running - but after trying to install SP2 it's crashing again). So my final chance to get this system back up and running is to try and install a "retail version" XP Pro to a new hard drive.
Can you perform a 'full installation' from a product that is listed as "upgrade" I found what I feel is a good deal on eBay - the blurb states that you can (boot from CD drive) and then when promted just insert your original XP Home or WIN98 disk which sorts out the "key problem". I have listed what this Power Seller says - I have also emailed previous buyers who say it's a great product - legal etc. But these buyers had installed over a working copy of Windows 2000 and XP Home....
I looking for a way to make sure my Operation System is working correctly? I have a recovery disc for Windows XP PRO, but it says that it will wipe out all of my upgrades if I use it?Is there a Service Pack 2 Recovery File that I can download to a My desktop, and then burn to a CD?
View 1 Replies View RelatedI am in big trouble. I have an hp pavilion a206x- and oldie. The kids gunked it up and it was so slow and running out of memory. Add/remove programs did not help. I decided to use the recovery disks and start with a clean slate. I backed up what we needed on cds and did a full recovery after doing the ctrl backspace option 6 to erase the hard drive. (oh, btw, it is XP) After all six disks, it freezes. I get to the screen that says "Recovery in progress." with Finalizing recovery highlighted in red on the left. Chatted with HP tech and there are no other recovery disks available because it is so old. I don't want to put any money into it. She says repair or retail OS purchase only options.
View 12 Replies View RelatedHP MEDIA CENTER COMPUTER WITH XP. I noted the D disk, labeled as HP RECOVERY DISK when I click MY COMPUTER is 96% full. Is there a way to delete some of these files,do I need this much space tied up?
View 14 Replies View RelatedWhy does 7330GZ gateway freeze all the time? It is a thing that just started after I did a full system recovery.
View 6 Replies View RelatedI tried to install the Recovery System, from the original disc, onto a 2-year-old Gateway laptop, but appartently the TrayApp file (whatever that is) on the disc is corrupted. I can't get a new disc because Gateway no longer carries them. What else can I use? Can I buy a Windows XP (the original OS) update and install that? Can I use the recovery disc from another brand of computer, like Dell?
View 3 Replies View RelatedMy computer crashed about a month ago and I had to use a recovery disc to restore my original system.. Everything works fine except when I boot up and following the Sony logo and Intel logo the following message appears "Press F11 for Acronis Startup Recovery Manager. Acronis fatal error Boot drive (partition) not found. Press Enter to try to boot your PC." Pressing enter boots up the PC fine but how can I eliminate the process? I had Acronis on both drives before the crash but it no longer exists.
View 1 Replies View RelatedPC wont boot up any more , it says there could be a currupt or missing file , it says its config system and says it might be able to repair the file using the install disc. i have a System Recovery CD-ROM
View 1 Replies View RelatedMy packard bell notebook model (easynote) E-3242 running windows XP. After installing SP2, XP wont load, even in safe mode. I already used cd-bootable Knoppix to copy all documents i needed to rescue. At this point a complete Re-install would be great, but alas, no install disk came with this notebook, And i lost the recovery discs i made. I do NOT have any XP disc available.How can I begin a re-install or similiar from the Hardisk with no Discs?
View 5 Replies View RelatedI get a little confused by terms like restore vs recovery, which are often interchanged incorrectly IMO -and then there are the terms bootable disc and startup disc, which can also get confusing - and I have seen other terms used also.
please explain exactly what you mean by the "bootable XP CD". I have a new XPsp2 home edition pc, and I had a millennium before that (which I made a "startup disc" for in add/remove programs - so I guess a startup disc is yet another term for boot disc - it was only a 3-1/2" diskette (less than a meg), and it would get my millennium to boot by typing "scanreg /restore" at a prompt that you eventually came to.
For my XP, I immediately made a Compaq "recovery dvd" (it took 2-dvd's) utilizing the "Compaq recovery cd-dvd creator" in start/programs/pc tools. This dvd (can also use cd's but it takes 8 or 9 cd's I believe) contains everything that is on the pc (from the factory), and which is also in the system recovery partition D:. There is also something called a "Recovery Tools CD", which I did not burn, since it did not seem necessary, after
reading about it in the "troubleshooting and system recovery guide" that came with my Compaq. I will burn that one to, if you can explain what it will do, that I can't ultimately achieve by using the "recovery dvd". The manual said that one of the things the "recovery tools cd" did was to remove the system recovery partition (drive D), so you could use it - but I'm sure there is another way of doing that from within the pc once you got it running using the recovery dvd - am I right - I've never messed around with partitioning, since I have no need to.
My new XP did not come with any "bootable CD" per se, and I made the "recovery dvd", as stated above. So please shed some light on what the "bootable XP CD" is that you refer to (because you said that a "restore Cd is really overkill" - I assume you mean the "recovery CD" that I mentioned). Also please provide your comments on the "recovery tools CD", and any other comments you have on the various terminologies I have mentioned above.
Hoping to avoid a full reinstall of Windows XP, I'd like to try some repair procedures. The problem is, when I launch my "Vaio PCV-RS430G" recovery disc it goes straight to Sony's proprietary recovery interface which provides ONLY the preset option to wipe my 'c' drive and reinstall Windows. According to some MS articles I've read, an XP recovery disc should allow me to access the Windows Recovery Console (by typing "R" at the welcome screen). Can anyone suggest how I can bypass the Sony recovery and get to the Windows Recovery Console?
View 2 Replies View RelatedHaving problems burning CDs to NEC burner. Keep getting the message that the disc is full. It's just started doing this. Installed firmware 1.07 and it's still not reading the disc properly. Have cleaned it. Have tried to burn using the Windows program (whatever you call it), CDXP and Nero. It will burn one backup of Quickbooks but will not add to the cd. It's like the CD is closed, but it's not.
I have a Lenovo Thinkcentre PC, with windows XP. I'm having a problem with the PC in that although I use an external hard drive to make sure the PC hard drive is not full and have very little saved on the actual PC, when I look in properties on the 'C' drive by right clicking on the 'C' drive icon, it is showing that there is 118GB used and only 26.1GB free space (total capacity 144GB). But when I go into the 'C' drive and manually explore all the different folders, there is nowhere near this much space used. Probably less than 5Gb that I can account for. I think it is drastically slowing my system, and also every few days I get a message that my computers performance is degraded and that I should defragment. I was under the impression that you didn't need to defragment anywhere near this frequently....
View 14 Replies View RelatedI have a new Toshiba laptop with win. xp profesional and I want to make a backup of all my hard drive on the DVD.I chose the backup option from win xp but after the 1st DVD is full doesn't advice me to insert the next DVD, it stops with the message:disc full.
View 2 Replies View RelatedOem disc auto partions any hdd as 16GB os fat 32/D:\ drive NTFS raw. The Sony OEM disc(s) are pre sp1.
What steps do I take to install and get the full 200 GB to bea recoginized correctly?
If i was to install service pack 2, via the disc i have, and i dont like what it has done to my computer, will i be able to refer back to a System Restore Point i created before installation?
View 3 Replies View RelatedI am stuck in a odd situation with my laptop. It's now gotten to the point where I just want to do a repair of Windows and hope that fixes things, but whenever I boot into my Windows XP CD, it says that it can't find any hard drives on my laptop. I can still boot into safe mode and access my files, so my hard drive is obviously there.Is there a way to initiate a windows repair WITHOUT booting into the CD? Or, can anyone think of why my CD can't find my hard drive?
View 11 Replies View RelatedCannot access the system and was not able to ad or remove anything to recover.
View 14 Replies View Relatedusing do a system recovery on xo home and when I go to Windowsupdates, it says I have a problem in updating and give me 3 options 1/ find answer from Response centre, from newsgroup and cal MS. Any specific reason why when I just did a system recovery and install my NAV (updated). For some reason, when I was updatring I gpt infected by sasser but I got it fix by applying patch 835732 and run stinger.
View 3 Replies View RelatedI couldn't seem to find the appropriate section for this, so move this to another section if it's unrelated. I was reading through this networking textbook about operating systems and I just found out that a computer can have more than one operating system. I have Windows XP installed through the Data Drivers Recovery CD and that's all I got related to my computer OS WINXP. If I wanted to install Windows XP to another computer that had Windows Vista, with that CD, is it possible, even though it says Data Drivers Recovery CD? Or do I need the actual Installation of WINDOWS XP (and other OS'S?).
View 11 Replies View RelatedI have a Compaq Presario Media Center SR2034NX Desktop PC with XP installed from the factory. I needed to do a system recovery that should have put things back to the place they were when I purchased it.10-21-07. It restored things but not back to the original install.Can I do system restore without useing the programs system restore feature? If so, I could restore to an earlier date when things were ok.
View 14 Replies View RelatedI used the recovery program (made by softthinks) for my HP compaq nc8430, to make one set of DVDs in case i would need those.Then, the program didn't work anymore because it set a limit to the times you could make the disks.I went around this problem using the ResetRMC program.The fact is that now I need to make again another set, because the second one have holes in them (will never again buy cheap DVD for backup!).I tried to use a solution, which i found on the internet: to delete the HPCD.sys file which sets the limit, but the only outcome was that , since then, the program does ask me to burn CD, it tells that my computer hasn't got any DVD burner.How can i solve this?
View 9 Replies View RelatedHello,
how to press the alt f10
Message quoted 1 times
I am looking to reformat my Compaq Presario V5002EA laptop with windows XP home edition SP3. Having read various forums it seems there should be an option in my 'Start > All Programs' menu to begin a system recovery program. Within this program there should be an option to create a set of Recovery Discs from which I could do the reformat.
I can't find this option anywhere on the computer and would prefer not to fork out �31 to HP if I can create the discs myself! Can someone please tell me how to find the Recovery Disc Creator?
Does anyone have a recovery disc for an HP pavilion 9745.I am told a disc Part Number 5066-0544 is what I require but my last resort, "Pavilion Repair Services" said they had not got one.
View 2 Replies View RelatedI have a E Machine PC, model W2888. I formated the hard drive, but I do not have the recovery disc with the drivers on it. I was looking for the driver for the ethernet card. The card they show on the front of the case says "Intel Pro 10/100 LAN" so I was looking for drivers for that but no luck. So I called Emachines and they told me to download a chipset for "Intel 845GV" I tried looking for that, but I don't know what I'm looking for. Does anyone know where I can find a driver for the ethernet card so I can download it on this PC I'm using, burn it to a disc install it into my E Machine PC so I can get online and do a windows update and install all of the other dirvers?
View 3 Replies View RelatedI have tried to do restore and also recovery with the disc's I burned when I first got my computer, to no avail, a Tech at Best Buy said I may have a spyware called smit fraud on my system and said he could get rid of it for $400.00, I wish I could afford it but I don't even have $4 bucks to my name and my wife refuses to shell it out. I was in a car accident 3 years ago and have lost 70% of the use of my right arm I am unemployed and it is hard for me to do the job I was trained to do which is cooking, I am a Certified Chef of 22 years now I can't even hold a knife. This computer is all I have to keep me from going insane and it has become so slow that it now runs at a snails pace, Please can someone help me? my wife did allow me to upgrade the connection from dial-up to DSL as we got a deal from our provider at $14.99 a month for a year which saves us on the extra phone line and all but the computer is still slow.
View 11 Replies View RelatedI have just bought a new PC so I could let the kids have the other one in their room. Both PC's are emachines and run XP. I have successfully networked the two with a crossover cable but I thought I'd reboot the old one to clear it from all the stuff I had on it. When I start the PC up with the recovery disk in either the D or E drive it doesn't get recognized and just goes strait to the user page. Any ideas on how I can get round this? I can enter the set up stage by pressing Del but i'm a bit green on this!
View 12 Replies View RelatedA few weeks ago I did a scan with a registry repair program. Some how it deleted the certificate for the encrypted files on my external hard drive. Because of this I don't have access to any encrypted files on the drive. I've never intentionally backed up the certificate for this drive.Is there anyway to recover this certificate...without buying some expensive program?
View 9 Replies View Related