Unmountable Volume - Can't Launch Recovery Console Through Recovery Disc?
Sep 5, 2008
Hoping to avoid a full reinstall of Windows XP, I'd like to try some repair procedures. The problem is, when I launch my "Vaio PCV-RS430G" recovery disc it goes straight to Sony's proprietary recovery interface which provides ONLY the preset option to wipe my 'c' drive and reinstall Windows. According to some MS articles I've read, an XP recovery disc should allow me to access the Windows Recovery Console (by typing "R" at the welcome screen). Can anyone suggest how I can bypass the Sony recovery and get to the Windows Recovery Console?
I am getting the dreaded unmountable boot volume error code. I have a dell lattitude cpxI have installed the windows xp cd and booted up I get into the Recovery console and this is what the screen saysMicrosfot Windows XP (TM) Recovery ConsoleThe Recoevery Console provides system repair and recovery functionality. Type exitt to quit the Recovery Console and retart the computerThe path or file specified is not valid.C: >fixboot
I've got a Gateway laptop and it's giving me the unmountable boot volume blue screen of death at start up. I've scoured the internet and all the solutions tell me I need to use the Windows setup screen to get to the recovery console. My problem is that my computer never gets to the setup screen. I restart with the gateway XP disk and it looks like it's setting up, but then nothing happens, and I don't get any sort of screen that lets me access the recovery console.Is there any other way to get this thing working again, my finals are due the end of this week, and all my most recent/finished files are on this thing.
I was transfering music and word files from my ipod to my computer when a window popped up saying something like "C" drive does not have room. Continue? I pressed cancel and went into my music files to delet some files to clear room. All of a sudden I encountered the blue screen of death! With error "unmountable boot volume". So far I have tried (without success):-Safe Mode-Last know configuration-chckdsk /r-chckdsk /p"Fixboot" recovery console windowxp this says it is looking for F:minint (when it is supposed to be looking for C:windows)-using harddrive as slave in secondary computer to run recovery majority of files came up as "file is unreadable"do not have a floppy drive so couldnt run the manufacturer utillities off web.
My question is regarding the recovery console available on Compaq machines. Is there a similar program to the Compaq recovery console that allows for the home user to install and back up their systems in a nearly identical manner as to how to Compaq R.C. works?
I looking for a way to make sure my Operation System is working correctly? I have a recovery disc for Windows XP PRO, but it says that it will wipe out all of my upgrades if I use it?Is there a Service Pack 2 Recovery File that I can download to a My desktop, and then burn to a CD?
Trying to recover my registry from being corrupted. I am in Windows XP Pro recovery console. But when I try At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line: md tmp copy c:windowssystem32 configsystem c:windows mpsystem.bak. It says I cannot copy the file. The file cannot be copied.
I lost my system recovery disc. I also lost all of my games that came with windows...free cell, solitaire, paint..etc. I just want those back. Can I run a system recovery program on windows without a disc
I need to do a System Recovery to restore my system back to its factory settings (I'm using WinXP Home). When I hit F10 upon startup in order to access the system recovery, nothing happens- it boots as it would regularly. I was able to boot up using the CD, and am now in the System Recovery console. Might anyone tell me what I need to do to perform a non-destructive, or even a destrucitve system recovery?
My packard bell notebook model (easynote) E-3242 running windows XP. After installing SP2, XP wont load, even in safe mode. I already used cd-bootable Knoppix to copy all documents i needed to rescue. At this point a complete Re-install would be great, but alas, no install disk came with this notebook, And i lost the recovery discs i made. I do NOT have any XP disc available.How can I begin a re-install or similiar from the Hardisk with no Discs?
I get a little confused by terms like restore vs recovery, which are often interchanged incorrectly IMO -and then there are the terms bootable disc and startup disc, which can also get confusing - and I have seen other terms used also.
please explain exactly what you mean by the "bootable XP CD". I have a new XPsp2 home edition pc, and I had a millennium before that (which I made a "startup disc" for in add/remove programs - so I guess a startup disc is yet another term for boot disc - it was only a 3-1/2" diskette (less than a meg), and it would get my millennium to boot by typing "scanreg /restore" at a prompt that you eventually came to.
For my XP, I immediately made a Compaq "recovery dvd" (it took 2-dvd's) utilizing the "Compaq recovery cd-dvd creator" in start/programs/pc tools. This dvd (can also use cd's but it takes 8 or 9 cd's I believe) contains everything that is on the pc (from the factory), and which is also in the system recovery partition D:. There is also something called a "Recovery Tools CD", which I did not burn, since it did not seem necessary, after reading about it in the "troubleshooting and system recovery guide" that came with my Compaq. I will burn that one to, if you can explain what it will do, that I can't ultimately achieve by using the "recovery dvd". The manual said that one of the things the "recovery tools cd" did was to remove the system recovery partition (drive D), so you could use it - but I'm sure there is another way of doing that from within the pc once you got it running using the recovery dvd - am I right - I've never messed around with partitioning, since I have no need to.
My new XP did not come with any "bootable CD" per se, and I made the "recovery dvd", as stated above. So please shed some light on what the "bootable XP CD" is that you refer to (because you said that a "restore Cd is really overkill" - I assume you mean the "recovery CD" that I mentioned). Also please provide your comments on the "recovery tools CD", and any other comments you have on the various terminologies I have mentioned above.
I need to get into the reocovery console to fix my master boot record but when it askes for my admin password, i enter what it should be but it doesnt work, ive tried leaving it blank and tried other passwords, and nothing. is there a way around the password fto run fixboot and fixmbr?
My problem is (to cut a long story short) that I have some dodgy .dll files, messing up my computer (XP) and preventing me from installing anything (not fun when the my computer fixer guy has reinstalled windows, failed to fix it, charged me fifty quid for the privelege, and left me with next to no software on it - not even word).i bought a very informative xp troubleshooting manual yesterday, and i can see my only option is to replace the files using the windows recovery console (I cant replaced them from within windows as its always using them).However, when I try to access the recovery console (in the manner advocated by my book, windows help, and numerous internet pages), by booting up from my recovery cds, and pressing R, i get taken to system recovery, a user friendly interface displaying 3 options for reformatting the whole system, and nothing else. this is obviously not the command prompt interface for the recovery console that i was expecting to be faced with.
I am trying to access the windows recovery console on the xp setup disk.However when I boot up the windows setup disk, it loads the files and goes straight to the menu where I have to choose which partition to install XP on.How do I get into the recovery console?The reason I am using recovery is because I have got a Error Message: Windows Could Not Start Because the Following File Is Missing or Corrupt: WinntSystem32ConfigSystem, when starting up the computer.
I have tried to use the Repair in the Windows recovery console, but everything says when you get to /windows, you enter your password yada yada yada.In the recovery console, under repair, I only have C:/>, there is no C:/>Windows at all.I ran fixboot anyway, now I am getting a NTLDR is missing message when I try to start. Before all of this I was stuck trying to boot up and it would not even let me into safe mode.
There was a thread {and I can't remember where or when} that someone posted a way to get recovery console for xp home edition,OEM. Anybody know about this? I'm still searching but can't find it again.Don't ask! I just didn't save it! Why I don't know! So there!
I'm running XP Pro on a standard ASUS-based PC, and I cannot get the Recovery Console to start up properly. It gets as far as allowing me to enter my password, but then reverts to a C prompt. It won't accept my password, whether I enter it in uppercase, lowercase or mized. I tried changed the password to something new and that didn't work, either.
The recovery console is a very useful application for getting to your data without having to boot XP. If a registry error due to hard disk corruption prevents you from booting XP even in Safe Mode, then it may be the only way.The recovery console is accessible from the XP CD if you boot from disc. If your CD is damaged, however, you may have no way of booting your system without reformatting the hard drive. This means data loss. Data loss tends to create distress esp. if you have no backups.Here is a way to make the recovery console an option in the Windows XP "OS Choices" menu. Do this before an inevitable registry corruption.1. Insert your Windows XP CD.2. Run {CD-ROM drive letter}:i386winnt32.exe /cmdcons3. A dialog comes up saying it takes 10mb, etc., etc. Click yes to install.If you don't normally see the OS choices menu at boot, go into system properties (winkey+pause), click the advanced tab, and xlixk Startup and Recovery. Check Time to Display List of OSs if it is unchecked, and then set the timeout value to a decent number of seconds.Apply the settings, reboot, and you should see two boot options.Here are some KB articles on how to use the recovery console and how to recover from a corrupted
I cannot access the recovery console to do anything further. also, i do not own an Windows XP Professional CD as the computer came preloaded with it and was a hand-me-down. consequently, i cannot seem to do anything with it. i have gone into the BIOS settings and changed it to boot from cd as i burned a copy of what i thought was a windows xp professional disc (said it was legal to do as long as it was for private use). however, the computer wont boot from the disc, or any disc for that matter.
My security software keeps a log of deleted/quarantined files but when I try to look at the "program files" directory where the log is kept using the recovery console disk it says "access denied". There is no admin password on the system that I know of. My command of DOS is limited, is there anyway of gaining access to the directory using the recovery console? Why is it telling me access denied when I am logged on as admin ?
I have a computer that has Hal.dll missing. Can this be fixed through the recovery console? I think it can but I don't remember how. A Wipe/install isnt the best option here.
I have been trying to repair a malfunction in XP Home that doesn't allow me to logon to Windows. When the computer boots up it displays a screen that gives me 5 options for starting up, all of which restart the computer when selected. I have been following the procedure in the XP support article Q307545 to remedy this problem and I have made it as far as the command prompt in the recovery console. However, when I try to type in the first command 'md tmp' I receive the message 'access denied.'
I have had a problem with the missing file windowssystem32configsystem and I have tried the fixes outlined on microsoft.com, however I am encountering a problem. When I go into the recovery area it does not ask me which version I want to use and doesn't ask me for a password. Then when I type a command it tells me 'access is denied'. I have gotten some commands to work (ie chkdsk, chkdsk /r fix, and fixboot). Also, when it wants me to type a command it has C:> before it and doesn't mention windows anywhere. I would really appreciate it if someone would help - there are a few files on the computer that I would really like to keep!
Whenever I boot up my computer it displays the following message: Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM..Now I went to the recovery console and I just don't remeber how to repair the file.
Recently, my computer has recieved a massive error. Upon startup, the windows xp logog displays and the little blue bar starts moving, then about 1 second later the bar freezes, and BSOD STOP: 0x7e appears. Nothing helps this (restart, last known good config, safe more, and i have no clue why all of a sudden I'm getting this). So, I went to the recovery console with the Win XP install disk. I hit R, it all loads, then where it asks "Which Windows installation would you like to log into?" it displays
a while ago now I noticed in my start menu a blank space, see picture HERE The space at the bottom of the start menu has not been removed with the methods i have tried. I used registry cleaners, tried system restore, tried all available options in task bar & start menu options all with no change. I read an article on how to do a system repair, in the article it said that programs might be affected and would have to be reinstalled if they didn't work correctly. My question is can I use the recovery console to replace the start menu and if so I will need instruction on how to do the proceedure as I'm basically novice and dont know the proceedures.
I have a computer that does not boot and gives the following error "Windows could not start because the following file is missing or corrupt: WINNTSYSTEM32CONFIGSYSTEM" So I did a goole search and brought up an article on the Microsoft Support site telling me how to start the computer using the Windows XP Home install cd and go through the Recovery Console to try the restore the backup registery. This article can be found at the following address: http://support.microsoft.com/?kbid=307545 just for reference.When I get into the Recovery Conbsole it does not ask me for the Administrator password or any password for that matter but I can not complete the instructions given in the article on the Microsoft Support webpage.
I was trying to copy the hive files from a restore point when the computer suddenly crashed with a BSOD (Stop x0D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL). I was simply typing at the prompt when it occurred. Memtest found no problems. Any idea why this happened? (This is a fancy notebook that "suddenly stopped working yesterday" according to the owner. He tried an OS repair with his original XP Home CD but the computer kept crashing part way through.
I was trying to repair a corrupt windowssystem32configsystem file using the recovery console - that did not work. Now, when I use the recovery console I am asked for an administrator password, which of course I do not know. A further complication is that the machine is configured with RAID (striped disks using Intel Matrix), so booting from any kind of recovery disk requires further drivers to be loaded. The ERD password reset tool I am using (not sure of the name but it is Linux based, and free) seems to allow support for RAID, but I can not get it to work (NTFS signature missing). I have tried 'fetching' the drivers from a floppy, but that does not seem to help. So where can I go from here? Are there any other password recovery tools that definitely support Intel Matrix Raid?
It all started when I was busy typing out an essay I heard my computer making some weird noise. It's the sort of noise I hear when my computer turns off completely. I decided after hearing it enough times to turn off my computer then turn it back on after a couple of minutes.Upon turning it on it gave me a black screen saying WINDOWSDRIVERSISAPNP.SYS could not be found and to insert the Windows XP CD and to hit 'r' to access recovery console to repair it, fine. I don't have my Dell's Windows XP Media Centre Edition CD (don't even think I got one back in 05) so I got a friend to give me a pirated XP Music Edition, Pirated XP Media Centre, and I even took my cousins LEGIT Windows XP Edition.
