System32 / Cannot Access The Recovery Console
Jun 1, 2008
I cannot access the recovery console to do anything further. also, i do not own an Windows XP Professional CD as the computer came preloaded with it and was a hand-me-down. consequently, i cannot seem to do anything with it. i have gone into the BIOS settings and changed it to boot from cd as i burned a copy of what i thought was a windows xp professional disc (said it was legal to do as long as it was for private use). however, the computer wont boot from the disc, or any disc for that matter.
View 3 Replies
ADVERTISEMENT
Feb 26, 2007
I need to get into the reocovery console to fix my master boot record but when it askes for my admin password, i enter what it should be but it doesnt work, ive tried leaving it blank and tried other passwords, and nothing. is there a way around the password fto run fixboot and fixmbr?
View 1 Replies
View Related
Jul 14, 2005
My problem is (to cut a long story short) that I have some dodgy .dll files, messing up my computer (XP) and preventing me from installing anything (not fun when the my computer fixer guy has reinstalled windows, failed to fix it, charged me fifty quid for the privelege, and left me with next to no software on it - not even word).i bought a very informative xp troubleshooting manual yesterday, and i can see my only option is to replace the files using the windows recovery console (I cant replaced them from within windows as its always using them).However, when I try to access the recovery console (in the manner advocated by my book, windows help, and numerous internet pages), by booting up from my recovery cds, and pressing R, i get taken to system recovery, a user friendly interface displaying 3 options for reformatting the whole system, and nothing else. this is obviously not the command prompt interface for the recovery console that i was expecting to be faced with.
View 10 Replies
View Related
Sep 7, 2006
I am trying to access the windows recovery console on the xp setup disk.However when I boot up the windows setup disk, it loads the files and goes straight to the menu where I have to choose which partition to install XP on.How do I get into the recovery console?The reason I am using recovery is because I have got a Error Message: Windows Could Not Start Because the Following File Is Missing or Corrupt: WinntSystem32ConfigSystem, when starting up the computer.
View 1 Replies
View Related
Feb 24, 2009
My security software keeps a log of deleted/quarantined files but when I try to look at the "program files" directory where the log is kept using the recovery console disk it says "access denied". There is no admin password on the system that I know of. My command of DOS is limited, is there anyway of gaining access to the directory using the recovery console? Why is it telling me access denied when I am logged on as admin ?
View 15 Replies
View Related
Aug 14, 2005
I have been trying to repair a malfunction in XP Home that doesn't allow me to logon to Windows. When the computer boots up it displays a screen that gives me 5 options for starting up, all of which restart the computer when selected. I have been following the procedure in the XP support article Q307545 to remedy this problem and I have made it as far as the command prompt in the recovery console. However, when I try to type in the first command 'md tmp' I receive the message 'access denied.'
View 6 Replies
View Related
Jan 22, 2007
I have had a problem with the missing file windowssystem32configsystem and I have tried the fixes outlined on microsoft.com, however I am encountering a problem. When I go into the recovery area it does not ask me which version I want to use and doesn't ask me for a password. Then when I type a command it tells me 'access is denied'. I have gotten some commands to work (ie chkdsk, chkdsk /r fix, and fixboot). Also, when it wants me to type a command it has C:> before it and doesn't mention windows anywhere. I would really appreciate it if someone would help - there are a few files on the computer that I would really like to keep!
View 9 Replies
View Related
Nov 24, 2009
It all started when I was busy typing out an essay I heard my computer making some weird noise. It's the sort of noise I hear when my computer turns off completely. I decided after hearing it enough times to turn off my computer then turn it back on after a couple of minutes.Upon turning it on it gave me a black screen saying WINDOWSDRIVERSISAPNP.SYS could not be found and to insert the Windows XP CD and to hit 'r' to access recovery console to repair it, fine. I don't have my Dell's Windows XP Media Centre Edition CD (don't even think I got one back in 05) so I got a friend to give me a pirated XP Music Edition, Pirated XP Media Centre, and I even took my cousins LEGIT Windows XP Edition.
View 1 Replies
View Related
Dec 16, 2008
I've got a Gateway laptop and it's giving me the unmountable boot volume blue screen of death at start up. I've scoured the internet and all the solutions tell me I need to use the Windows setup screen to get to the recovery console. My problem is that my computer never gets to the setup screen. I restart with the gateway XP disk and it looks like it's setting up, but then nothing happens, and I don't get any sort of screen that lets me access the recovery console.Is there any other way to get this thing working again, my finals are due the end of this week, and all my most recent/finished files are on this thing.
View 3 Replies
View Related
Feb 10, 2008
I receive an error message c_437.nls missing or corrupted. I booted with windows boot cd and go into recovery console. When I try to copy the file c_437.nls from windows boot cd to windows system 32 directory to overwrite the file.When I try this i get access denied. How do I logon as administrator to fix this file in recovery console. I don't have a password for my administrator account.
View 10 Replies
View Related
Jan 11, 2007
My question is regarding the recovery console available on Compaq machines. Is there a similar program to the Compaq recovery console that allows for the home user to install and back up their systems in a nearly identical manner as to how to Compaq R.C. works?
View 2 Replies
View Related
Sep 5, 2008
Hoping to avoid a full reinstall of Windows XP, I'd like to try some repair procedures. The problem is, when I launch my "Vaio PCV-RS430G" recovery disc it goes straight to Sony's proprietary recovery interface which provides ONLY the preset option to wipe my 'c' drive and reinstall Windows. According to some MS articles I've read, an XP recovery disc should allow me to access the Windows Recovery Console (by typing "R" at the welcome screen). Can anyone suggest how I can bypass the Sony recovery and get to the Windows Recovery Console?
View 2 Replies
View Related
Nov 27, 2009
Trying to recover my registry from being corrupted. I am in Windows XP Pro recovery console. But when I try At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line: md tmp copy c:windowssystem32 configsystem c:windows mpsystem.bak. It says I cannot copy the file. The file cannot be copied.
View 8 Replies
View Related
Jan 3, 2008
I have tried to use the Repair in the Windows recovery console, but everything says when you get to /windows, you enter your password yada yada yada.In the recovery console, under repair, I only have C:/>, there is no C:/>Windows at all.I ran fixboot anyway, now I am getting a NTLDR is missing message when I try to start. Before all of this I was stuck trying to boot up and it would not even let me into safe mode.
View 10 Replies
View Related
Mar 28, 2004
There was a thread {and I can't remember where or when} that someone posted a way to get recovery console for xp home edition,OEM. Anybody know about this? I'm still searching but can't find it again.Don't ask! I just didn't save it! Why I don't know! So there!
View 14 Replies
View Related
Sep 7, 2005
I'm running XP Pro on a standard ASUS-based PC, and I cannot get the Recovery Console to start up properly. It gets as far as allowing me to enter my password, but then reverts to a C prompt. It won't accept my password, whether I enter it in uppercase, lowercase or mized. I tried changed the password to something new and that didn't work, either.
View 7 Replies
View Related
Aug 12, 2002
The recovery console is a very useful application for getting to your data without having to boot XP. If a registry error due to hard disk corruption prevents you from booting XP even in Safe Mode, then it may be the only way.The recovery console is accessible from the XP CD if you boot from disc. If your CD is damaged, however, you may have no way of booting your system without reformatting the hard drive. This means data loss. Data loss tends to create distress esp. if you have no backups.Here is a way to make the recovery console an option in the Windows XP "OS Choices" menu. Do this before an inevitable registry corruption.1. Insert your Windows XP CD.2. Run {CD-ROM drive letter}:i386winnt32.exe /cmdcons3. A dialog comes up saying it takes 10mb, etc., etc. Click yes to install.If you don't normally see the OS choices menu at boot, go into system properties (winkey+pause), click the advanced tab, and xlixk Startup and Recovery. Check Time to Display List of OSs if it is unchecked, and then set the timeout value to a decent number of seconds.Apply the settings, reboot, and you should see two boot options.Here are some KB articles on how to use the recovery console and how to recover from a corrupted
View 9 Replies
View Related
Apr 11, 2005
I have a computer that has Hal.dll missing. Can this be fixed through the recovery console? I think it can but I don't remember how. A Wipe/install isnt the best option here.
View 2 Replies
View Related
Jun 30, 2005
Whenever I boot up my computer it displays the following message: Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM..Now I went to the recovery console and I just don't remeber how to repair the file.
View 14 Replies
View Related
Jul 11, 2010
Recently, my computer has recieved a massive error. Upon startup, the windows xp logog displays and the little blue bar starts moving, then about 1 second later the bar freezes, and BSOD STOP: 0x7e appears. Nothing helps this (restart, last known good config, safe more, and i have no clue why all of a sudden I'm getting this). So, I went to the recovery console with the Win XP install disk. I hit R, it all loads, then where it asks "Which Windows installation would you like to log into?" it displays
View 14 Replies
View Related
Oct 18, 2009
What is the Windows Recovery Console command that can create partitions?
View 4 Replies
View Related
Oct 28, 2006
a while ago now I noticed in my start menu a blank space, see picture HERE
The space at the bottom of the start menu has not been removed with the methods i have tried. I used registry cleaners, tried system restore, tried all available options in task bar & start menu options all with no change. I read an article on how to do a system repair, in the article it said that programs might be affected and would have to be reinstalled if they didn't work correctly. My question is can I use the recovery console to replace the start menu and if so I will need instruction on how to do the proceedure as I'm basically novice and dont know the proceedures.
View 6 Replies
View Related
Dec 20, 2006
I have a computer that does not boot and gives the following error "Windows could not start because the following file is missing or corrupt: WINNTSYSTEM32CONFIGSYSTEM" So I did a goole search and brought up an article on the Microsoft Support site telling me how to start the computer using the Windows XP Home install cd and go through the Recovery Console to try the restore the backup registery. This article can be found at the following address: http://support.microsoft.com/?kbid=307545 just for reference.When I get into the Recovery Conbsole it does not ask me for the Administrator password or any password for that matter but I can not complete the instructions given in the article on the Microsoft Support webpage.
View 1 Replies
View Related
Nov 14, 2006
I was trying to copy the hive files from a restore point when the computer suddenly crashed with a BSOD (Stop x0D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL). I was simply typing at the prompt when it occurred. Memtest found no problems. Any idea why this happened? (This is a fancy notebook that "suddenly stopped working yesterday" according to the owner. He tried an OS repair with his original XP Home CD but the computer kept crashing part way through.
View 6 Replies
View Related
Aug 18, 2009
I was trying to repair a corrupt windowssystem32configsystem file using the recovery console - that did not work. Now, when I use the recovery console I am asked for an administrator password, which of course I do not know. A further complication is that the machine is configured with RAID (striped disks using Intel Matrix), so booting from any kind of recovery disk requires further drivers to be loaded. The ERD password reset tool I am using (not sure of the name but it is Linux based, and free) seems to allow support for RAID, but I can not get it to work (NTFS signature missing). I have tried 'fetching' the drivers from a floppy, but that does not seem to help. So where can I go from here? Are there any other password recovery tools that definitely support Intel Matrix Raid?
View 4 Replies
View Related
May 30, 2010
How do i run regedit if i am in windows recovery console via windows xp cd?
View 1 Replies
View Related
Dec 23, 2006
I am running win xp pro. I can log onto windows with no problems but I want to run the recovery console in dos. But for some reason my administrator password is saying its invalid. Is there any way to change it in normal mode. Or is the admin password different in dos than in normal mode?
View 3 Replies
View Related
Jul 4, 2005
I have with my disk setup. I have 3 dynamic disks which were all working fine until last night when I upgraded my processor and memory. I have fitted an XP 2600 with 333 FSB in place of the 266 version. I also replaced my 512MB of PC2700 with PC3200. I should explain that I did not realise my MB supported the 333 FSB when I bought it. The PC 3200 is purely to give me some leeway for overclocking. Anyway since changing the memory and PSU the PC will not boot at all. I can boot from a floppy or CD but I cannot from the C drive. If I try to restore from a ghost image on another drive I am not given the option to copy to the C drive at all. If I try to re-install Windows or I try to repair the existing installation, I am not given the option to repair at all. I also cannot get into recovery console
View 5 Replies
View Related
Dec 5, 2008
Let me preface this by saying I'm a fairly advanced user, a software developer by trade, and I've been digging through google and ms tech support pages trying to find a solution to this. The last time I used this machine it was on SP2. I gave it to my wife well over a year ago and have no idea when or IF SP3 was installed. Of course I don't have the OS disks anymore. She brought it to me yesterday with the dreaded BSOD. I can't be sure what triggered it. Maybe a failed SP3 install, maybe some Chemdraw trial software...I can't be sure.
So I acquired an XP SP3 disc and ran the repair. I got a new BSOD about some missing executable, which I was able to install in the recovery console after entering an empty password. That got me back to my original BSOD so no luck. So my theory is that maybe SP3 is the problem and procede to acquire an XP SP2 disc instead, which happened to be a Dell distribution disc, which was probably a bad idea, but it seemed to work as any other disc would. Now I get a new BSOD telling me I'm missing msvcrt.dll. Which makes sense because EVERY repair that I've done, regardless of disc or service pack, has been unable to copy msvcrt.dll AND msvcp60.dll. Although only after repairing to SP2, do I get the specific BSOD message that this file is missing....
View 6 Replies
View Related
May 5, 2010
I rebooted, and instead of coming up directly to my desktop, it came up with the log-in screen for the Administrator and me. I selected me, and it came up in safe-mode with the cmd shell. Ok, this is important... I went into msconfig, and safe-mode was NOT selected. So thinking that I needed to do a repair, I inserted my original XP disc and booted into the recovery console. First, I did the normal stuff, like chkdsk and so forth. I also looked at my boot.ini. Everything appeared normal. So I rebooted, same problem.
Went back into the recovery console and did a repair. Everything went along smoothly and guess what! After the first reboot, it gave me the infamous "You are in Safe Mode... you can't do what you are doing in safe mode... you are a bad person and you need to be punished". (Obviously, I'm paraphrasing here). And I'm in the endless reboot cycle. So, I've tried everything (almost) and I would prefer not to do a full re-install. I tried using bootcfg, but this didn't help any since it doesn't say "safe-mode". (Although I did go through the motions). I also deleted my boot.ini and it gave me an error message (no boot.ini, or whatever), and still got stuck in the endless reboot cycle. I also did a fixboot, which didn't help either. And I attempted to do a fixmbr, but I got scared from the "if you do this you are really screwed" message, and didn't proceed.
View 6 Replies
View Related
Jan 10, 2009
I have a laptop running XP (Home edition). It has been kept up to date with security fixes and has virus protection, etc.Suddenly, when I try to boot XP, I get a message saying something about autochk which vanishes too fast to read followed immediately by the blue screen and a notification of a stop 0xc000021A error. I tried safe mode and various other options such as trying to restore a previous state of the machine, but it kept hanging with the same error. I checked the Microsoft website which has a suggested method to resolve the problem using the recovery console
View 7 Replies
View Related
