I looking for a way to make sure my Operation System is working correctly? I have a recovery disc for Windows XP PRO, but it says that it will wipe out all of my upgrades if I use it?Is there a Service Pack 2 Recovery File that I can download to a My desktop, and then burn to a CD?
View 1 Replies
My packard bell notebook model (easynote) E-3242 running windows XP. After installing SP2, XP wont load, even in safe mode. I already used cd-bootable Knoppix to copy all documents i needed to rescue. At this point a complete Re-install would be great, but alas, no install disk came with this notebook, And i lost the recovery discs i made. I do NOT have any XP disc available.How can I begin a re-install or similiar from the Hardisk with no Discs?
View 5 Replies View RelatedI get a little confused by terms like restore vs recovery, which are often interchanged incorrectly IMO -and then there are the terms bootable disc and startup disc, which can also get confusing - and I have seen other terms used also.
please explain exactly what you mean by the "bootable XP CD". I have a new XPsp2 home edition pc, and I had a millennium before that (which I made a "startup disc" for in add/remove programs - so I guess a startup disc is yet another term for boot disc - it was only a 3-1/2" diskette (less than a meg), and it would get my millennium to boot by typing "scanreg /restore" at a prompt that you eventually came to.
For my XP, I immediately made a Compaq "recovery dvd" (it took 2-dvd's) utilizing the "Compaq recovery cd-dvd creator" in start/programs/pc tools. This dvd (can also use cd's but it takes 8 or 9 cd's I believe) contains everything that is on the pc (from the factory), and which is also in the system recovery partition D:. There is also something called a "Recovery Tools CD", which I did not burn, since it did not seem necessary, after
reading about it in the "troubleshooting and system recovery guide" that came with my Compaq. I will burn that one to, if you can explain what it will do, that I can't ultimately achieve by using the "recovery dvd". The manual said that one of the things the "recovery tools cd" did was to remove the system recovery partition (drive D), so you could use it - but I'm sure there is another way of doing that from within the pc once you got it running using the recovery dvd - am I right - I've never messed around with partitioning, since I have no need to.
My new XP did not come with any "bootable CD" per se, and I made the "recovery dvd", as stated above. So please shed some light on what the "bootable XP CD" is that you refer to (because you said that a "restore Cd is really overkill" - I assume you mean the "recovery CD" that I mentioned). Also please provide your comments on the "recovery tools CD", and any other comments you have on the various terminologies I have mentioned above.
Hoping to avoid a full reinstall of Windows XP, I'd like to try some repair procedures. The problem is, when I launch my "Vaio PCV-RS430G" recovery disc it goes straight to Sony's proprietary recovery interface which provides ONLY the preset option to wipe my 'c' drive and reinstall Windows. According to some MS articles I've read, an XP recovery disc should allow me to access the Windows Recovery Console (by typing "R" at the welcome screen). Can anyone suggest how I can bypass the Sony recovery and get to the Windows Recovery Console?
View 2 Replies View RelatedI lost my system recovery disc. I also lost all of my games that came with windows...free cell, solitaire, paint..etc. I just want those back. Can I run a system recovery program on windows without a disc
View 1 Replies View RelatedI used the recovery program (made by softthinks) for my HP compaq nc8430, to make one set of DVDs in case i would need those.Then, the program didn't work anymore because it set a limit to the times you could make the disks.I went around this problem using the ResetRMC program.The fact is that now I need to make again another set, because the second one have holes in them (will never again buy cheap DVD for backup!).I tried to use a solution, which i found on the internet: to delete the HPCD.sys file which sets the limit, but the only outcome was that , since then, the program does ask me to burn CD, it tells that my computer hasn't got any DVD burner.How can i solve this?
View 9 Replies View RelatedHello,
how to press the alt f10
Message quoted 1 times
I am looking to reformat my Compaq Presario V5002EA laptop with windows XP home edition SP3. Having read various forums it seems there should be an option in my 'Start > All Programs' menu to begin a system recovery program. Within this program there should be an option to create a set of Recovery Discs from which I could do the reformat.
I can't find this option anywhere on the computer and would prefer not to fork out �31 to HP if I can create the discs myself! Can someone please tell me how to find the Recovery Disc Creator?
Does anyone have a recovery disc for an HP pavilion 9745.I am told a disc Part Number 5066-0544 is what I require but my last resort, "Pavilion Repair Services" said they had not got one.
View 2 Replies View RelatedI have a E Machine PC, model W2888. I formated the hard drive, but I do not have the recovery disc with the drivers on it. I was looking for the driver for the ethernet card. The card they show on the front of the case says "Intel Pro 10/100 LAN" so I was looking for drivers for that but no luck. So I called Emachines and they told me to download a chipset for "Intel 845GV" I tried looking for that, but I don't know what I'm looking for. Does anyone know where I can find a driver for the ethernet card so I can download it on this PC I'm using, burn it to a disc install it into my E Machine PC so I can get online and do a windows update and install all of the other dirvers?
View 3 Replies View RelatedI have tried to do restore and also recovery with the disc's I burned when I first got my computer, to no avail, a Tech at Best Buy said I may have a spyware called smit fraud on my system and said he could get rid of it for $400.00, I wish I could afford it but I don't even have $4 bucks to my name and my wife refuses to shell it out. I was in a car accident 3 years ago and have lost 70% of the use of my right arm I am unemployed and it is hard for me to do the job I was trained to do which is cooking, I am a Certified Chef of 22 years now I can't even hold a knife. This computer is all I have to keep me from going insane and it has become so slow that it now runs at a snails pace, Please can someone help me? my wife did allow me to upgrade the connection from dial-up to DSL as we got a deal from our provider at $14.99 a month for a year which saves us on the extra phone line and all but the computer is still slow.
View 11 Replies View RelatedI have just bought a new PC so I could let the kids have the other one in their room. Both PC's are emachines and run XP. I have successfully networked the two with a crossover cable but I thought I'd reboot the old one to clear it from all the stuff I had on it. When I start the PC up with the recovery disk in either the D or E drive it doesn't get recognized and just goes strait to the user page. Any ideas on how I can get round this? I can enter the set up stage by pressing Del but i'm a bit green on this!
View 12 Replies View RelatedMy boss has two laptops both toshiba his older one a satellite 1110 his daughter had being using and was full of junk he asked me to run the restore disk ive used the wrong disc I now have the corredt discs to hand including the windows xp start up. I also dowloaded a 6 disc floppy boot up for xp but cant get the laptop to boot into anything . Ive been into the bios and set and tried booting from both options but all i get is a screen giving me the option to start in safe mode and last know configuration when i choose safe mode i get a page of geek all starting with multi(0)disk(0)rdisk(0)partition(1) WindowsSystem32Drivers all with different logs all ending in.
View 13 Replies View RelatedThe recovery disk that came with my machine is now well out of date and I want to make my own, with all the latest drivers etc. I am running XP SP2 but XP came as an OEM inbuilt provision. The manufacturer (Tiny Computers) will not release a copy of the XP disk to me unless I pay the full XP price!
hi folks, my problem is this, one of my home pcs a packard bell 1.5 p4 shows as having an invalid product key and wont let me update "ok" and when i try to install a fresh xp on top of it(legal) it will only get so far and then i get a stop screen come up and i have to shut it down and reopen using the allready installed xp, i dont have a recovery disc to return it to factory settings which leaves me stuck on the dodgy xp. My ? is this, is there some way i can enter the key without installing a fresh xp and if not how do i get past the stop screen and install. Any help and suggestions/advice will be greatly appreciated and i will supply any further info that may be necessary.
View 6 Replies View RelatedI tried to install the Recovery System, from the original disc, onto a 2-year-old Gateway laptop, but appartently the TrayApp file (whatever that is) on the disc is corrupted. I can't get a new disc because Gateway no longer carries them. What else can I use? Can I buy a Windows XP (the original OS) update and install that? Can I use the recovery disc from another brand of computer, like Dell?
View 3 Replies View RelatedI've got my whole life on this stupid computer and have not backed up my hd's at all. Anyone willing to send me copies of the restore discs
View 5 Replies View Relatedi made a set of recovery discs from my compaq presario but it won`t work on my dell.
View 10 Replies View Relatedok my laptop was wiped and i cant find my recovery disc i try'd to go to the compaq website to order or download a new one but i've try'd 3 times over the last couple of weeks and when ever i get to the page to choose my model it says oops sorry page not aval at this time. Does anyone know where else i can get one its for an xp pro version i would preffer it if i could download
View 2 Replies View RelatedMy computer crashed about a month ago and I had to use a recovery disc to restore my original system.. Everything works fine except when I boot up and following the Sony logo and Intel logo the following message appears "Press F11 for Acronis Startup Recovery Manager. Acronis fatal error Boot drive (partition) not found. Press Enter to try to boot your PC." Pressing enter boots up the PC fine but how can I eliminate the process? I had Acronis on both drives before the crash but it no longer exists.
View 1 Replies View RelatedI have an HP computer that only has the system recovery disc and not the full xp disc. SP2 came with the install. I have an XP disc just with SP1a can I do a repair install with that and then just install SP2 after?
View 6 Replies View RelatedMy sony vaio came with a recovery option basically its a small partition on my drive that i can access if i press f7 before i boot.it basically restores my PC to "factory Settings" as if were right out of the store with all drivers and preinstaled software.i want to make a similar disc for my desktop. i want to have it on a disc though and not a partition. dont care if its dvd or cdr .anyone know of a 'how to guide'
View 8 Replies View RelatedI uninstalled some preloaded Windows programs, I reinstalled some of them, but now my laptop's all funny. When I connect to The Internet, any program that I open freezes for like 10 minutes, after which it unfreezes. During this time I normally restart my computer, with no success. If I open Windows Live Messenger and Internet Explorer 7 together it freezes normally. Pinball, WordPad, Sound Recorder, and Volume Control cannot be restored. Also, I tried using my Toshiba Recovery DVD, with no success. It says Loading RAMDISK Image, then it reboots and loads the exact same system with no changes made.
View 1 Replies View RelatedHow do I create a boot disc for WindowsXP SP2 in case of problems or is there one already on the software discs?
View 2 Replies View RelatedI have ghost 2003 installed on my pc and want to create a Recovery Disc (Windows XP and installed drivers). The only problem is I have no floppy drive. Could anyone give me step by step details on how to do this. I have tried ghost boot wizard (need a floppy).I have tried Disk to Image and then Image to Disk. I wiped out all that was on the 1st drive (C) and Partition (D) and all that was on the 2nd drive (E). I don't know how it happened but it did. I have now reinstalled Windows and all the drivers but I still want to make a recovery disc.
View 7 Replies View RelatedAs per advice received here, I would like to create a Recovery CD including SP2 and all more recent updates received from Microsoft. However, it appears that you may not be able to do so unless you have an XP Operating System CD. Most computers come without such a creature unfortunately and neither of my systems have them.
Is it possible to create such a Recovery disk using the OS Recovery CD which came with my Compaq/HP laptop?Or else, is it possible to copy just the SP2 plus all other Microsoft downloads without having to manually execute each and every file?
I have recently restored my PC to it's original state as bought from the shop using the Recovery Disk supplied leaving just the Operating System.A friend wants to do the same but has no Recovery Disk. His PC was built by an independent.
Is there a way of creating a recovery disk to do this or is there site to download the relevant info/software.
i have a labtec web cam with software but i have a dell mini and have no where to insert the disc, please help
View 1 Replies View RelatedI'm running XP Home on a Sony VAIO. The PC has a partitioned HD: C (main), & D (storage). I defrag every night.
This evening, I got the dreaded "not enough disc space to complete disc defragmenter" message. Suddenly tonight I'm showing only 2% free space on drive C. I went in and changed my System Restore percentage from 12% to 6%. Now I'm showing 6% free space (but still can't defrag).
I shouldn't have had to change my System Restore percentage tho. I'm sure that's not the culprit. Up until last night the C drive was nowhere near this full. Something's there tonight that wasn't yesterday. ...A whole LOT of something. The Defrag graph is showing a nearly FULL C drive with a LOT of red "fragmented" files"
I've been doing a bit of downloading, but after it's on the desktop (part of C), I move it to the D storage drive (which has a LOT of free space remaining).
Something's fishy. I'm no expert, but I'm thinking I need to find some type of application to tell me what's suddenly on that drive taking up all this space. Anyone have any helpful suggestions?
neither wmp 11 or roxio recognizes a blank disc. when i try to burn a disc (dvd or cd) both wmp 11 and roxio tells me to insert a blank disc. i have tried putting a disc in first, or wait for the program to tell me to insert disc but neither way works!:
View 9 Replies View RelatedAfter putting the windows XP CD in and rebooting, now whenever the computer is restarted I get the blue screen that says unable to find disc press F3 to exit setup. How do I stop this so computer will reboot normally?
View 6 Replies View Related
