Error, Probably Hard Drive Error, Recovery Disc Not Working
Oct 29, 2006
I uninstalled some preloaded Windows programs, I reinstalled some of them, but now my laptop's all funny. When I connect to The Internet, any program that I open freezes for like 10 minutes, after which it unfreezes. During this time I normally restart my computer, with no success. If I open Windows Live Messenger and Internet Explorer 7 together it freezes normally. Pinball, WordPad, Sound Recorder, and Volume Control cannot be restored. Also, I tried using my Toshiba Recovery DVD, with no success. It says Loading RAMDISK Image, then it reboots and loads the exact same system with no changes made.
View 1 Replies
ADVERTISEMENT
Jun 20, 2005
My computer crashed about a month ago and I had to use a recovery disc to restore my original system.. Everything works fine except when I boot up and following the Sony logo and Intel logo the following message appears "Press F11 for Acronis Startup Recovery Manager. Acronis fatal error Boot drive (partition) not found. Press Enter to try to boot your PC." Pressing enter boots up the PC fine but how can I eliminate the process? I had Acronis on both drives before the crash but it no longer exists.
View 1 Replies
View Related
Aug 15, 2009
My daughters computer is giving me a Grub hard disc error message everytime I try to boot up the pc, and now the pc will not start up past this error message. I tried rebooting a few times but it just kept giving me this error and then would not go further.
View 14 Replies
View Related
Apr 24, 2008
Dumped Vista and installed XPP. Went smoothly, except get this message on start-up. Adapter 1 -no array defined -no hard disc detected continues on and windows starts, no problem.
View 10 Replies
View Related
Oct 14, 2007
I have tried to do restore and also recovery with the disc's I burned when I first got my computer, to no avail, a Tech at Best Buy said I may have a spyware called smit fraud on my system and said he could get rid of it for $400.00, I wish I could afford it but I don't even have $4 bucks to my name and my wife refuses to shell it out. I was in a car accident 3 years ago and have lost 70% of the use of my right arm I am unemployed and it is hard for me to do the job I was trained to do which is cooking, I am a Certified Chef of 22 years now I can't even hold a knife. This computer is all I have to keep me from going insane and it has become so slow that it now runs at a snails pace, Please can someone help me? my wife did allow me to upgrade the connection from dial-up to DSL as we got a deal from our provider at $14.99 a month for a year which saves us on the extra phone line and all but the computer is still slow.
View 11 Replies
View Related
Sep 7, 2005
I looking for a way to make sure my Operation System is working correctly? I have a recovery disc for Windows XP PRO, but it says that it will wipe out all of my upgrades if I use it?Is there a Service Pack 2 Recovery File that I can download to a My desktop, and then burn to a CD?
View 1 Replies
View Related
Oct 27, 2008
My machine shut down properly with no errors. Then when I tried to start it the next day I encountered the following errors. The first is a Boot Disc Error which is followed by a Boot from CD prompt.After copying files from the windows xp cd, a blue screen with a stop message appears with details of an error -
partmgr.sys PAGE_FAULT_IN_NONPAGED_AREA. At this point, I am able to reboot in safe mode and do a system restore. However, when I shut down and try to restart, I'm back to square one
View 3 Replies
View Related
May 19, 2006
A problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
View 4 Replies
View Related
Aug 7, 2007
I am having issues with my computer. When windows loads I am getting a "checking file system on C:" screen, the screen reads as follows:Checking file system on C:The type of the file system is NTFS. The volume is dirty. 65 percent complete (this is the progress point where i get a bsod) The bsod reads: c000021a Unknown Hard Error Unknown Hard Error. The machine is a Dell Dimension 4600C, Win XP, no significant changes software or hardware, I have kept it up to date with software and driver updates. Have had some recent virus, maleware issues which i had been trying to clean right prior to the meltdown.
View 9 Replies
View Related
Oct 20, 2009
I'm having a problem with a laptop that will not boot up.
Lenovo 3000 C100
Windows XP Home
After powering it it up it seems like it does not recognize that the hard drive is there so XP does not boot. No error message. It brings up a Boot Device menu screen with the options to boot from Floppy (does not have one), HardDisk (does not work), CD-ROM or PXE. Choosing HardDisk does not work.
In the BIOS screen the hard disk has the status: "Disable" and there does not seem to be a way to change that. In the BIOS boot sequence the hard disk appears as it should. I've tried reordering the sequence but it makes no difference
View 3 Replies
View Related
Apr 4, 2008
I trying to help a friend with their computer; Dell Dimension 4700, XP Pro, and getting the error message: A DISK READ ERROR OCCURRED. PRESS CTRL & ALT & DEL Does this mean the hard drive is bad?
View 14 Replies
View Related
Aug 7, 2005
I want to format my HHD and reinstall XP Pro but my system says the HHD
cannot be reconised.
View 1 Replies
View Related
Jun 13, 2010
replaced a hard drive and all data was lost. Now I am getting error messages and machine crashes and reboots on its on sometimes it will shoe the window that ask what mode is requested to reboot,it usually will successfully reboot itslf in normal mode and will display the errors Microsoft Error Messages Have also .ran chkdskand virus check. Will add HJT hereADDED
C:Docume~luser{Locals~l{TempWER78a0.dir00mini061310-02dmp
C:Docume~l{userLocals~l{TempWER78a0.dir00sysdata.xml
View 3 Replies
View Related
Jan 7, 2005
I tried to reformat my hard drive. When it got to a certain point where it was checking the disk it got to 20% then hung or stopped. Did this three times. I have tried to run CHKDSK and have been unsuccessful. I get messages during the operation that say "file record segment is unreadable.
Once phase 1 is finished, I get messages that "correcting error in index" and replacing orphan files (or sometthing to tthat effect). Not long after that a message appears that says "an error has occured" and the computer continues to boot. Please note that my computer tries to run through CHKDSK everytime I boot. I want to reformat but it seems impossible.
View 13 Replies
View Related
Sep 8, 2007
When starting my computer, I have started getting a "Hard Drive Not Found" error on the black screen just as the pc starts booting up. I've not written down all the details, but I see the MAC address displayed and a cursor blinks just after the letters DHCP, there is something about "boot filename not received", then "Hard Drive not found" and then it defaults to the Windows boot screen and will boot up fine. The pc seems to run normal once up...but, I'm somewhat concerned about a "Hard Drive Not Found" error. It just doesn't sound good. I'm going to try to get more specifics as to what I'm seeing on the boot screens, but wondered if anyone here might have some suggestions as to what my issue is?
My pc specs should show in my signature. Also, I recently upgraded my graphics card, but that's the only hardware I've been playing with lately. Don't know if that would make any difference because I wasn't getting any trouble until now and that graphics card has been in about a week already.
View 10 Replies
View Related
May 14, 2007
HP ZT3000 was working fine. after no major changes, hard drive made a few noises and a missing hal.dll error message appeared. I have tried knoppix, for a few times I was copying files to external hard drive but the transfer stalled. I have tried fixmbr, fixboot, and copying the ntldr and ntdetec files from recovery cd. One strange thing is that the file system is now listed as fat16. Is this data recoverable? I have backed up the system on the external but it was about 2 weeks ago. I would like to recover a few emails in the outlook pst file. Is the hard drive fried or did the boot.ini file become terribly corrupt?
View 6 Replies
View Related
Sep 2, 2009
I did a new hard drive install. When the new HD was complete I thought I would copy the data from the old drive to the new.They both still had os installed They were both connected to the system at the same time.When I finished, I removed the old drive. The new drive wouldn't boot. "Disk boot failure, insert system disk and press enter". After recovery disk completed, the system booted fine. I could reboot from the shutdown option.
The problem I have is when the system is shutdown completely. It requires the system disk again. It will reboot after the system disk is reinstalled. I continually get the "Disk boot failure, insert system disk and press enter" error message.During bootup after a shutdown, I can F2 into the bios before the error message. It will allow me to exit and then windows will boot without the error message.
View 19 Replies
View Related
Feb 14, 2007
A while back a friend partitioned my hard drive into three different partitions. the one I use is now almost full and I would like to merge the almost-full partition with the next partition, which is completely empty. Can anyone help me with the steps to do that? Thanks in advance. I have a windows xp system with the big service pak installed also. the pc is a dell dimension 4300 with a 1.6 ghz processor and 513 mb of RAM.
View 5 Replies
View Related
Sep 16, 2008
I tried to install Ubuntu onto my HD yesterday, and i ran into an issue during the install (i received a message that said the optical disk or hard drive had an error and that the instal would be aborted). So the Ubuntu install was aborted, and i tried to boot back into windows but received this message:
Quote: Load needed for kerenl:
ntoskrnl.dll
hal.dll
kdcom.dll I have tried to boot into safe mood with no luck. So i tried to do a repair from the XP disk i have, but then i received this error message:
View 1 Replies
View Related
Oct 19, 2006
I am having an issue with a Maxtor Model Number 92739U6 hard drive. I have just finished formatting and installing windows xp home edition. Everything was going ok until I restarted the computer. First right after I restarted the computer I got an error message A Disk Read Error Occurred. Press CTRL+ALT+Del. I was unsure what caused this error message so I started to research this issue on Maxtor?s website and they advised me to use fdisk /mbr to repair the error. I did that and restarted the computer. Same Error?. The thing I can?t figure out is why I am able to boot right to windows using a boot disk.
View 8 Replies
View Related
Jan 23, 2006
My notebook froze overnight. While rebooting my notebook, I get: No hard drive found error. After several reboots, I get CANNOT LOAD OPERATING SYSTEM. I insert the XP CD to repair XP - No Go. I insert the XP CD to do a fresh install - it tells me to format my hard drive. But I need the data on there. Never happened before - and I am lost.
View 2 Replies
View Related
Oct 19, 2007
having my laptop returned from service I found my Bios messed with where when I would start my computer but Bios wouldn't find my hard drive or an OS I found that my system was set to RAID instead of ATA. After resetting it back to ATA it boots up fine. However I wanted to reformat and start clean.I placed my XP disk in, reset my BIOS to read my optical drive first and no problems.However every time I get to partition drive all I see is "Unknown Device" If I press any key I get a blue screen of death. Most times it's the 0X0000008E.
View 9 Replies
View Related
Jan 16, 2006
The other day on boot up I received an "lsass.exe error, invalid parameter" screen. Clicking "OK" just continued the boot up and error message in a loop. This has been a common problem for folks. Although I could not determine (due to the state of the system) if in was a virus or a corrupt file, I was finally able to coerce, after many varied attempts, an overlay install of XP Pro. However, all that was on my hard drive dissapeared (programs, settings, files).
Although, when I went to reinstall some items (Adobe Acrobat, for example) it stated that it was still resident on drive. Further, when I went to do a defrag, it stated that it was not needed (probably because of the small amount of recent installation) but the graph showed 20 gigs of space taken up (my original 18+ gigs and the new install). So, the original installed volume is still on the drive yet I can not see it or access it.
View 2 Replies
View Related
Jan 1, 2005
I recently installed a new Seagate 120 GB hard drive as a slave. I also installed iTunes and am importing songs from my CD collection. Since doing this I am frequently getting a blue screen on Windows XP w/ Service Pack 2. It also seems as though my system is a little sluggish.
View 1 Replies
View Related
Jul 23, 2009
My problem is a result of a long series of attempts to fix a corrupt Windows registry file. A few days ago I booted my laptop and received a blue screen error: c0000218, relating to a corrupt Windows registry file. Windows could not load. After a lot of searching online I found a way to manually replace this and four other related files from the c:WindowsRepair folder using the command prompt.
This process seemed to work and Windows began to load. I then received a lsass.exe error saying something about invalid passwords. My laptop began an infinite cycle of restarting itself. I looked up the lsass.exe error and people seemed to think it was unrecoverable. As my hard drive was reasonably small (100g) and had been showing some signs of problems I decided to just buy a new one. I went out and purchased a new 320g 2.5" hard drive along with a 2.5" USB drive enclosure and another 1g stick of RAM......
View 6 Replies
View Related
Jan 17, 2005
want specific instructions on how to reformat a secondary hard drive without having the xp disc. never done this before. used to have son do all my hard drive installation work but he moved far away. i have complete system restore discs for first hard drive but does not recognize my secondary hard drive; found this out when reinstalling/doing complete system recovery on first hard drive. of course i backed up all my important information from both drives. i want to reformat second hard drive due to several reasons. One, i want to start off fresh. Two, there is a lot of junk on there i no longer want or need or use.
View 3 Replies
View Related
Jun 16, 2005
I recently tried to reinstall windows xp, but the installation was interrupted and left me with a partially installed windows on my hard drive. Now, whenever I try to install again, it gives me the error: NTLDR is missing. I made a msdos boot disc to reformat my drive such that I can try installing windows again. However, I have two hard drive (one for windows and programs and one for storage) and I don't know which one is which letter. How can I find this information, so that I don't accidentally wipe my storage drive?
View 6 Replies
View Related
Dec 29, 2006
An external hard drive. When it is on & I try to boot,I get the following error : Invalid system disk Replace the disk, and then press any key I then have to turn off the external & press any key to get it to boot. Is there a way that I can boot with that external turned on. Some setting I need to change perhaps? I have an E-Machines computer about 2 years old.
View 6 Replies
View Related
Nov 4, 2006
My packard bell notebook model (easynote) E-3242 running windows XP. After installing SP2, XP wont load, even in safe mode. I already used cd-bootable Knoppix to copy all documents i needed to rescue. At this point a complete Re-install would be great, but alas, no install disk came with this notebook, And i lost the recovery discs i made. I do NOT have any XP disc available.How can I begin a re-install or similiar from the Hardisk with no Discs?
View 5 Replies
View Related
Jul 19, 2005
I get a little confused by terms like restore vs recovery, which are often interchanged incorrectly IMO -and then there are the terms bootable disc and startup disc, which can also get confusing - and I have seen other terms used also.
please explain exactly what you mean by the "bootable XP CD". I have a new XPsp2 home edition pc, and I had a millennium before that (which I made a "startup disc" for in add/remove programs - so I guess a startup disc is yet another term for boot disc - it was only a 3-1/2" diskette (less than a meg), and it would get my millennium to boot by typing "scanreg /restore" at a prompt that you eventually came to.
For my XP, I immediately made a Compaq "recovery dvd" (it took 2-dvd's) utilizing the "Compaq recovery cd-dvd creator" in start/programs/pc tools. This dvd (can also use cd's but it takes 8 or 9 cd's I believe) contains everything that is on the pc (from the factory), and which is also in the system recovery partition D:. There is also something called a "Recovery Tools CD", which I did not burn, since it did not seem necessary, after
reading about it in the "troubleshooting and system recovery guide" that came with my Compaq. I will burn that one to, if you can explain what it will do, that I can't ultimately achieve by using the "recovery dvd". The manual said that one of the things the "recovery tools cd" did was to remove the system recovery partition (drive D), so you could use it - but I'm sure there is another way of doing that from within the pc once you got it running using the recovery dvd - am I right - I've never messed around with partitioning, since I have no need to.
My new XP did not come with any "bootable CD" per se, and I made the "recovery dvd", as stated above. So please shed some light on what the "bootable XP CD" is that you refer to (because you said that a "restore Cd is really overkill" - I assume you mean the "recovery CD" that I mentioned). Also please provide your comments on the "recovery tools CD", and any other comments you have on the various terminologies I have mentioned above.
View 4 Replies
View Related
Sep 15, 2005
Any possible solutions? where can i go to get a new disc, I have no idea where it went.
View 3 Replies
View Related
