Microsoft Error Messages - Replaced A Hard Drive
Jun 13, 2010
replaced a hard drive and all data was lost. Now I am getting error messages and machine crashes and reboots on its on sometimes it will shoe the window that ask what mode is requested to reboot,it usually will successfully reboot itslf in normal mode and will display the errors Microsoft Error Messages Have also .ran chkdskand virus check. Will add HJT hereADDED
C:Docume~luser{Locals~l{TempWER78a0.dir00mini061310-02dmp
C:Docume~l{userLocals~l{TempWER78a0.dir00sysdata.xml
View 3 Replies
ADVERTISEMENT
Jul 13, 2005
When I start SR I can only see one restore point, the one I made the day after I replaced my hard drive.But now when I try to create a new restore point it allows me to enter the name, then after I click OK I get the message ''System Restore is not able to create a restore point. Please restart the computer , and then run System restore again.''After I restart I run System Restore again and get the same message.
Also, the restore points I made before I replaced my hard drive no longer show up.When I replaced the drive (with a Maxtore 80 gb), I used their MaxBurn program to duplicate everything form the old one to the new one. It boots from the new C drive and runs OK and all my programs are there, but some act strangely. I'm wondering if these programs are looking for some kind of system volume information tho make sure they are still on the original system.
View 5 Replies
View Related
Aug 26, 2010
Windows home Edition XP My Hard Drive Crashed and have replaced it with a new one. I have the Dell CD's but do not have the valid ID and wonder if there is a way to get the valid ID so I can reload the original software. How do I reinstall the software using the Dell CD's
View 6 Replies
View Related
Apr 11, 2008
I have a Toshiba USB flash drive. I have a problem when I using it on a win2000 sysem. It keeps poping up a warnning message saying I removed the drive. And then "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)". But it is just a standard drive so that does not make sense. Other USB drives have the same issue. I can sometimes get them to work for a bit before this happens. It is almost like I removed it. It also will just do this at random. It is working pops up the warning, then not, wait a few minutes and it is working and conencted again. I tried another ports and same issue. Other USB devices work fine though.
View 7 Replies
View Related
May 19, 2006
A problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
View 4 Replies
View Related
Oct 29, 2006
I uninstalled some preloaded Windows programs, I reinstalled some of them, but now my laptop's all funny. When I connect to The Internet, any program that I open freezes for like 10 minutes, after which it unfreezes. During this time I normally restart my computer, with no success. If I open Windows Live Messenger and Internet Explorer 7 together it freezes normally. Pinball, WordPad, Sound Recorder, and Volume Control cannot be restored. Also, I tried using my Toshiba Recovery DVD, with no success. It says Loading RAMDISK Image, then it reboots and loads the exact same system with no changes made.
View 1 Replies
View Related
Mar 24, 2010
trying to copy pictures or word document to a 4 gig san disc. The message I get is cannot copy ....: files on this cd-rom drive are read-only. You cannot copy or move files over to this cd-rom drive.
View 3 Replies
View Related
Aug 7, 2007
I am having issues with my computer. When windows loads I am getting a "checking file system on C:" screen, the screen reads as follows:Checking file system on C:The type of the file system is NTFS. The volume is dirty. 65 percent complete (this is the progress point where i get a bsod) The bsod reads: c000021a Unknown Hard Error Unknown Hard Error. The machine is a Dell Dimension 4600C, Win XP, no significant changes software or hardware, I have kept it up to date with software and driver updates. Have had some recent virus, maleware issues which i had been trying to clean right prior to the meltdown.
View 9 Replies
View Related
Oct 20, 2009
I'm having a problem with a laptop that will not boot up.
Lenovo 3000 C100
Windows XP Home
After powering it it up it seems like it does not recognize that the hard drive is there so XP does not boot. No error message. It brings up a Boot Device menu screen with the options to boot from Floppy (does not have one), HardDisk (does not work), CD-ROM or PXE. Choosing HardDisk does not work.
In the BIOS screen the hard disk has the status: "Disable" and there does not seem to be a way to change that. In the BIOS boot sequence the hard disk appears as it should. I've tried reordering the sequence but it makes no difference
View 3 Replies
View Related
Apr 4, 2008
I trying to help a friend with their computer; Dell Dimension 4700, XP Pro, and getting the error message: A DISK READ ERROR OCCURRED. PRESS CTRL & ALT & DEL Does this mean the hard drive is bad?
View 14 Replies
View Related
Nov 17, 2007
How do I get rid of error messages? I am running windows xp
View 3 Replies
View Related
Jan 16, 2008
How do I fix error this error message?
View 5 Replies
View Related
Aug 7, 2005
I want to format my HHD and reinstall XP Pro but my system says the HHD
cannot be reconised.
View 1 Replies
View Related
Jan 7, 2005
I tried to reformat my hard drive. When it got to a certain point where it was checking the disk it got to 20% then hung or stopped. Did this three times. I have tried to run CHKDSK and have been unsuccessful. I get messages during the operation that say "file record segment is unreadable.
Once phase 1 is finished, I get messages that "correcting error in index" and replacing orphan files (or sometthing to tthat effect). Not long after that a message appears that says "an error has occured" and the computer continues to boot. Please note that my computer tries to run through CHKDSK everytime I boot. I want to reformat but it seems impossible.
View 13 Replies
View Related
Sep 8, 2007
When starting my computer, I have started getting a "Hard Drive Not Found" error on the black screen just as the pc starts booting up. I've not written down all the details, but I see the MAC address displayed and a cursor blinks just after the letters DHCP, there is something about "boot filename not received", then "Hard Drive not found" and then it defaults to the Windows boot screen and will boot up fine. The pc seems to run normal once up...but, I'm somewhat concerned about a "Hard Drive Not Found" error. It just doesn't sound good. I'm going to try to get more specifics as to what I'm seeing on the boot screens, but wondered if anyone here might have some suggestions as to what my issue is?
My pc specs should show in my signature. Also, I recently upgraded my graphics card, but that's the only hardware I've been playing with lately. Don't know if that would make any difference because I wasn't getting any trouble until now and that graphics card has been in about a week already.
View 10 Replies
View Related
May 14, 2007
HP ZT3000 was working fine. after no major changes, hard drive made a few noises and a missing hal.dll error message appeared. I have tried knoppix, for a few times I was copying files to external hard drive but the transfer stalled. I have tried fixmbr, fixboot, and copying the ntldr and ntdetec files from recovery cd. One strange thing is that the file system is now listed as fat16. Is this data recoverable? I have backed up the system on the external but it was about 2 weeks ago. I would like to recover a few emails in the outlook pst file. Is the hard drive fried or did the boot.ini file become terribly corrupt?
View 6 Replies
View Related
Sep 2, 2009
I did a new hard drive install. When the new HD was complete I thought I would copy the data from the old drive to the new.They both still had os installed They were both connected to the system at the same time.When I finished, I removed the old drive. The new drive wouldn't boot. "Disk boot failure, insert system disk and press enter". After recovery disk completed, the system booted fine. I could reboot from the shutdown option.
The problem I have is when the system is shutdown completely. It requires the system disk again. It will reboot after the system disk is reinstalled. I continually get the "Disk boot failure, insert system disk and press enter" error message.During bootup after a shutdown, I can F2 into the bios before the error message. It will allow me to exit and then windows will boot without the error message.
View 19 Replies
View Related
Feb 5, 2005
my computer is incredibly screwed up! Nothing works,and it takes forever to load. here are some of the errors I get. I get an error message about DrWatson. I got the error signature for this one. Hasn't been connected to the internet since it was first made about a month ago to update windows.
View 4 Replies
View Related
May 31, 2005
error messages on my pc are becoming more frequent for some reason . The first one is when i try to install something sometimes a error box comes geaded "16 bt MS-DOS Subsystem" and it say C:unzippedfips20fips.exe, C:PROGRA~1SymantecS32EVNT1.DLL. An installable Virtual Device Driver failed Dll initialization. Choose "close" to terminate the application.
View 1 Replies
View Related
May 26, 2007
i have 2 error messages at shutdown. one says ccApp. and the other is device 10 orlO notification window.
View 3 Replies
View Related
Dec 10, 2007
error msg is about and how can I stop it from coming on whenever I boot up my computer. I am running Win XP Pro SP2. I could not copy this error msg into this box so I am typing everything that it says.
View 6 Replies
View Related
Apr 23, 2008
My computer was running fine until I booted it up this morning and got these 2 error messages:
View 4 Replies
View Related
Aug 22, 2005
What is one to do with error messages that come up on your computer. they all seem to have diff numbers but I have no clue what to do with them can anyone help I have been using this computer for about one year and still have alot to learn so bear with me.
View 1 Replies
View Related
May 14, 2005
as i run internet explorer there are times where some websites may not respond, and after i close the window i occasionally i recieve error reports. i have windows XP and i have run ad-aware and spybot search and destroy.
View 2 Replies
View Related
Aug 9, 2007
I am having a problem with active desktop. I have Windows XP SP2 installed on my machine and have an active desktop link to a flash file on the web. Every time I start my computer, start the flash file or the flash file ends, I get a "Internet Explorer cannot download - Unspecified Error" error. Do you guys have any advice on how to resolve this issue? Any way to suppress IE7 error messages?
View 1 Replies
View Related
Jul 5, 2010
I updated my Win XP drivers, and after updating them I was prompted to restart my PC, when restarting i got the BSOD with 0x0000008E and 0x0000005 error messages.
View 6 Replies
View Related
Apr 15, 2007
I recently reformatted due to slowing of my computer and things have been great, playing alot of Battlefield 2142 and it looks amazing on my rig, however today I was playing and things were going excruciatingly show, and eventually just stopped. I had to unplug it and turn it back on. I noticed problems immediately after XP loaded up and got on my user. Resolution was to a minumum, my AIM, Steam, and just about everything crashed and gave me the error report message. Everytime I load AIM or Firefox(IE too), it gives me an error report screen, however there really isn't a problem, i just move the error window to the corner of my screen and I'm able to browse freely.
View 8 Replies
View Related
Jul 1, 2006
I"ve just come from PC Pitstop for a computer scan ....this after I'd done disc cleanup, defrag, and spyware clean-up.....to find out why my computer's so darned slow. I got a score of 675 out of a possible 720, but the yellow flag was on the internet ("adjust your IE cache") connection. THEN, a little window popped up and here's what it says:
"Messenger Service
Message FROM to TO on 7/1/2006 2:38:41 PM
STOP! WINDOWS REQUIRES IMMEDIATE ATTENTION
Windows has found 55 Critical System Errors.
To fix the errors please do the following:
1.Download Registry Update from "www.regfixit.com"
2. Install Registry Update
3. Run Registry Update
4. Reboot your computer.
FAILURE TO ACT NOW MAY LEAD TO SYSTEM FAILURE!
View 7 Replies
View Related
Sep 16, 2008
I tried to install Ubuntu onto my HD yesterday, and i ran into an issue during the install (i received a message that said the optical disk or hard drive had an error and that the instal would be aborted). So the Ubuntu install was aborted, and i tried to boot back into windows but received this message:
Quote: Load needed for kerenl:
ntoskrnl.dll
hal.dll
kdcom.dll I have tried to boot into safe mood with no luck. So i tried to do a repair from the XP disk i have, but then i received this error message:
View 1 Replies
View Related
Oct 19, 2006
I am having an issue with a Maxtor Model Number 92739U6 hard drive. I have just finished formatting and installing windows xp home edition. Everything was going ok until I restarted the computer. First right after I restarted the computer I got an error message A Disk Read Error Occurred. Press CTRL+ALT+Del. I was unsure what caused this error message so I started to research this issue on Maxtor?s website and they advised me to use fdisk /mbr to repair the error. I did that and restarted the computer. Same Error?. The thing I can?t figure out is why I am able to boot right to windows using a boot disk.
View 8 Replies
View Related
Jan 23, 2006
My notebook froze overnight. While rebooting my notebook, I get: No hard drive found error. After several reboots, I get CANNOT LOAD OPERATING SYSTEM. I insert the XP CD to repair XP - No Go. I insert the XP CD to do a fresh install - it tells me to format my hard drive. But I need the data on there. Never happened before - and I am lost.
View 2 Replies
View Related
