Hello,
how to press the alt f10
Message quoted 1 times
My boss has two laptops both toshiba his older one a satellite 1110 his daughter had being using and was full of junk he asked me to run the restore disk ive used the wrong disc I now have the corredt discs to hand including the windows xp start up. I also dowloaded a 6 disc floppy boot up for xp but cant get the laptop to boot into anything . Ive been into the bios and set and tried booting from both options but all i get is a screen giving me the option to start in safe mode and last know configuration when i choose safe mode i get a page of geek all starting with multi(0)disk(0)rdisk(0)partition(1) WindowsSystem32Drivers all with different logs all ending in.
View 13 Replies View RelatedI tried to install the Recovery System, from the original disc, onto a 2-year-old Gateway laptop, but appartently the TrayApp file (whatever that is) on the disc is corrupted. I can't get a new disc because Gateway no longer carries them. What else can I use? Can I buy a Windows XP (the original OS) update and install that? Can I use the recovery disc from another brand of computer, like Dell?
View 3 Replies View RelatedI looking for a way to make sure my Operation System is working correctly? I have a recovery disc for Windows XP PRO, but it says that it will wipe out all of my upgrades if I use it?Is there a Service Pack 2 Recovery File that I can download to a My desktop, and then burn to a CD?
View 1 Replies View RelatedMy packard bell notebook model (easynote) E-3242 running windows XP. After installing SP2, XP wont load, even in safe mode. I already used cd-bootable Knoppix to copy all documents i needed to rescue. At this point a complete Re-install would be great, but alas, no install disk came with this notebook, And i lost the recovery discs i made. I do NOT have any XP disc available.How can I begin a re-install or similiar from the Hardisk with no Discs?
View 5 Replies View RelatedI get a little confused by terms like restore vs recovery, which are often interchanged incorrectly IMO -and then there are the terms bootable disc and startup disc, which can also get confusing - and I have seen other terms used also.
please explain exactly what you mean by the "bootable XP CD". I have a new XPsp2 home edition pc, and I had a millennium before that (which I made a "startup disc" for in add/remove programs - so I guess a startup disc is yet another term for boot disc - it was only a 3-1/2" diskette (less than a meg), and it would get my millennium to boot by typing "scanreg /restore" at a prompt that you eventually came to.
For my XP, I immediately made a Compaq "recovery dvd" (it took 2-dvd's) utilizing the "Compaq recovery cd-dvd creator" in start/programs/pc tools. This dvd (can also use cd's but it takes 8 or 9 cd's I believe) contains everything that is on the pc (from the factory), and which is also in the system recovery partition D:. There is also something called a "Recovery Tools CD", which I did not burn, since it did not seem necessary, after
reading about it in the "troubleshooting and system recovery guide" that came with my Compaq. I will burn that one to, if you can explain what it will do, that I can't ultimately achieve by using the "recovery dvd". The manual said that one of the things the "recovery tools cd" did was to remove the system recovery partition (drive D), so you could use it - but I'm sure there is another way of doing that from within the pc once you got it running using the recovery dvd - am I right - I've never messed around with partitioning, since I have no need to.
My new XP did not come with any "bootable CD" per se, and I made the "recovery dvd", as stated above. So please shed some light on what the "bootable XP CD" is that you refer to (because you said that a "restore Cd is really overkill" - I assume you mean the "recovery CD" that I mentioned). Also please provide your comments on the "recovery tools CD", and any other comments you have on the various terminologies I have mentioned above.
Hoping to avoid a full reinstall of Windows XP, I'd like to try some repair procedures. The problem is, when I launch my "Vaio PCV-RS430G" recovery disc it goes straight to Sony's proprietary recovery interface which provides ONLY the preset option to wipe my 'c' drive and reinstall Windows. According to some MS articles I've read, an XP recovery disc should allow me to access the Windows Recovery Console (by typing "R" at the welcome screen). Can anyone suggest how I can bypass the Sony recovery and get to the Windows Recovery Console?
View 2 Replies View RelatedI have brand new acer .I have disabled a few things but could do with a bit of help on the rest.Trouble is I am not too sure what they are for,tried reading the manual,ended up even more confused.I basically go on I.E and Google things and read this website,that's about it.
View 1 Replies View RelatedBlue screen comes up after logging in with :
"Checking file system on C:
Type of file system is FAT 32
One of the disks needs to be checked for consistency
Windows is verifying files and folders
Checks until 100% completed then shows "Windows has made corrections to file system".
Then goes back to windows is starting up and then log in again. Cannot find a way to break this loop. Is this virus or Windows fixing itself. Problem started out of the blue, nothing like it before (over 18 months).
how can i get rid of it?
My Acer Laptop when I turn it on I receive a POPUP saying In blue eRAgent and under that An invalid encounter
I click OK and it goes away.
Anybody knows what it means?
I am having a great deal of trouble installing Windows XPon an Acer laptop. I have added the query below, and would be very grateful if anybody could suggest a solution.
"Acer laptop model Aspire 5101, supplied with Vista Home Premium.
Hard disk is apparently split into three partitions C, D and (hidden) small F according to Partition Manager.
I have formatted the drive and tried to load Window XP Home with Service Pack 2, but willnot continue installation.
-approx 75 % complete - as (quote) "cannot find file".
What purpose does hidden partition serve? Any information please on how to achieve full instal of XP?"
I have had an Acer Aspire 5670 for about 2 years. This morning, it was making a horrible noise (I left it on overnight and couldn't hear the noise until I went into my office). It sounded like a fan or spinning noise of some kind, but also might have been an audio file that was stuck repeating the first tenth of a second of the track. In any event, the monitor was dark and the PC was totally nonresponsive. I did a hard reboot and since then, the PC has not worked. The power button does turn it on and I can hear the HDD spinning and the DVD/CD drive looking for a disc (and it will accept/eject discs) but the screen never comes on and the PC doesn't seem to boot up. I don't ever hear the Windows welcome .wav file.
how should i fix the problem?
I have an Acer Aspire 3000 laptop with 1 gb of ram. Just put a fresh load of Win XP pro on it, nothing else. System craaaaawls just shy of freezing and is basically unusable...until I take the battery out and just run on AC. Then it runs like a champ. If and when I get a chance to look at task manager, it says that the "system" process is using all the cpu. As soon as I take the battery out, the system process goes down to practically nothing.
This is the third time I have reloaded windows in two days. The first two time it took a little longer to act up...this last time it was immediately after install.
On the first load I got as far as loading all the ACER-specific drivers for that model, and sp3...then it started.
The second time I got as far as the drivers then it started.
This last time, like I said, it was right after install.
I don't think it's hardware specific as I can go to safe mode with the battery in and it runs just fine.
suggestions?
My laptop will not boot.It starts up and gets to the windows vista screen where it says: configuring update stage 3 of 3 0% and then restarts and does it all over again and again and , well you get the point. I have tried system repair and it cannot find errors or at least can't seem to fix anything. I have tried all system restore points, but to no avail.
how can i solve this problem?
We have image of XP of dell laptop,while doing imaging on Acer laptop with same image its taking abt 1 hr .Network card difference is identified
please suggest any solution to use same image?
A laptop that i have is stuck in "preparing to standby", and it has a battery attached so pulling the plug wont work and pressing the power button isnt helping either.
what should i do?
I have Acer Aspire 4270 laptop (pre-installed with Linux), bought a year back. I got Windows Xp (SP 2) installed onto that by the shopkeeper. Now that I am installing Windows XP (SP 2) by myself, I am getting a lot of issue. These are summed as below:
1. Problem finding the LAN, Audio, Graphics/chipset drivers on internet.
2. I installed Audio driver (Z01-Audio_XP Vista-v5423whql <-- for Vista) and its working fine. Also I downloaded a LAN driver (working fine). But could not find any graphics driver.
Main Issue
3. After performing above stuff, when I create a new folder, I cannot rename it. When I try to delete it, it does NOT gets deleted but in turn creates a new folder with the name "New Folder(1)" or (2) like that.
I have tried formatting the entire hard disk and installed XP 2-3 times, still no luck.
5. Internet is working fine but cannot take backup of my stuff as same kind of problem occurs in anything I connect to my laptop.
I am really getting frustrated with the issue.
Is this issue because of a wrong driver?
I have an Acer Aspire 3000 with a serious problem, it won't load Windows XP and Windows XP is the installed OS.
What happened before the error:
i tried to install Norton Systemworks 2006. Before this, computer was working fine, and yes, I did scan it for viruses. None were found. computer had a partition, but the partition was removed.
Now, I got this computer from a confused cousin, and the history is as follows;
She bought the computer new. However, there was this strange partition in there that seemed to be duplicating everything (or so she told me), so she took it to a friend to have the partitions removed. Okay, the computer worked fine after that. Actually, better than fine, it worked better than it had new. I know, lol, because I tried using it once before and again after.
Now, flash forward a few months and her free trail of McAfee that came with the computer ends and she realizes that she needs some sort of security on it. So she buys Norton as suggested by another friend of hers. Knowing I know something of computers (and she's not all that sure), she gets me to install Norton.
I do.
And upon re-starting, I get after the Acer load screen a black screen with "Load error! Press any key to reboot." I press enter, but nothing happens.
So, in it goes to the friendly computer guy who uses the disks that came with the machine to restore it, and it comes back exactly as it was before I installed Norton, only, minus all her saved stuff. Okay, so obviously if there was a problem it has to be gone now, right?
Well, evidently not as when I install Norton again, guess what happens? Right. It's back to the black screen of death telling me, "Load Error! Press any key to reboot."
Now, it did have Norton Ghost on it, and as per the instructions in the book that comes with Norton, I disabled it before trying to install Systemworks because the first time this happened I didn't. I've tried calling the computer tech that fixed it for me before, but I guess he doesn't want to deal with it anymore because he won't return my phone calls or my emails.
how can she solve the problem?
How to format windows xp in acer laptop which is not working right now. the window does not open?
View 1 Replies View RelatedI'm not too sure if this is the right forum to post this, but I was looking for advice on overclocking an acer Travelmate7512AWSMi laptop. Currently I have an AMD Turion MK-38 chip running at 2.21GHz.
How would I go about overclocking, is it safe whats the best programs to use?
It's about my Acer laptop (model 5672) with Windows XP Pro SP3.
The problem with the laptop is that he randomly freezes. It can happened each two days or each 5 minutes. It doesn�t matter what program I�m using. When he freezes, I need to turn him off by pushing the onbutton.
When I want to reboot he refuses. He powers on, but when he should be showing the white Acerlogo screen (splash screen?), before the booting of Windows, nothing happens and the screen stays black.
The only thing I can do is power him off and start over again. But when I power him off, I noticed that at the end, the dvdwriter makes a lot of noise.
Only after a while or a lot of trying (on and off pushing on the button) he boots.
The not appearance of the white Acerlogo screen (splash?) at the beginning of the boot process tells me this isn�t a software problem.
I also have to mention that he went back to the factory 3 times in 3 weeks. The first time the hdd was changed, second time the RAM memory was faulty. The third time, they said they "tested complete system=>system OK No trouble found".
how can i fix this problem?
I have a friend who has a slow Acer laptop. I told him I would be happy to reformat his hard drive and reinstall everything back to it. However I told him if you don't have the XP cd then forget it. lol. Now let's say he can't find the XP cd.
What are my other options if I wanna reformat his hard drive?
i have a windows xp installation disk that came with my old dell pc.would it matter it i tried using that dell windows xp disk on my acer laptop? the acer has vista and it just doesnt run all that great with that os on it. do you think that windows xp would give me any trouble installing it since its not a dell machine?
View 1 Replies View RelatedMy Acer XP screen cracked.I looked it up and was able to connect it to a different monitor by using the command: Fn then pressing F5 three times. It worked for the last few months, but Yesterday I accidentally hit the power cord of the monitor and it switched back to the laptop. I tried the command again but this time it didn't work.
Is there another command or something I could do to connect my laptop to the other monitor?
my laptop wont turn on when i press the power botten,nothing happens. when the charger is in the light that shows the batter is chargeing turns green.
Model: Acer travlemate 2310
Has anyone replaced vista with xp on any of the new acer ex5620 laptops?
If so,i need some information on doing this.Thanks for any help you can provide.
I already install HD audio software in window xp but i cannot install. it is show me failure
when finish the install.
I have an Acer Laptop that will no longer bootup when I turn it on it keeps restarting and It didn't come with a CD. I tried booting it in Safe Mode but it does the same thing.
What can I do?
My son purchased an Acer laptop with Win XP. It keeps shutting down during certain processes like converting files and things that run on their own like virus scans and SpySearch and Destroy. We also cannot get his e-mail to receive. It did for a couple days, but now won't work and our broadn band tech support tried all suggestions and said something else is wrong. We figure at this point the best thing to do is reformat the harddrive. This will also get rid of some unwanted files that were already on the harddrive that we can't delete.
The issue: how do we do this. The only disk we have is the Acer recovery disks.
I'm not sure if this counts as a hardware or software problem, sorry if I've posted it in the wrong forum.
My parents have an acer laptop, it is about 3 years old, it has a centrino 1.6, 256mb ram, 40GB HD, CDRW and windows XP.
it was working perfectly, and when last used it shut down normally. However on trying to boot it up today it gets to a screen that says �load error! "Press any key to reboot"however when pressing a key it just displays the load error message again and seems stuck in a loop.
This happens only a couple of seconds into the boot sequence, the screen immediately before the error screen gives the following information:
Base Memory xxxxx
Extended memory xxxxx
Total memory xxxxxx
Auto detecting IDE device
Primary master xxxxxx
Secondary master
Insyde ACPI bios initialised
At the bottom of the screen it says � Press F2 to enter system configuration�
If I press F2 at that point I get into the BIOS.
I did not know what to do, I wondered whether Windows had been corrupted so decided to wipe the hard drive and reinstall windows using the recovery CD�s supplied with Acer.
After going into the BIOS to change to boot device to the CD drive, the clean reinstall seemed to go well, everything progressed, as normal and every thing seemed to being reinstalled. I was optimistic that all would be well.
However, on rebooting after the reinstall I got the same error message as I had done before. (I had changed the boot device to drive C)
I tried doing a full reinstall again, though of coarse it did not help, and right now I don�t have a clue how to progess in trying to solve the problem.
So I have tried EVERYTHING to get an operating system onto my Acer 3610 laptop. It has a brand new IDE Hard Drive, brand new RAM chips.
I have tried to load XP by using the standard install disc. I have tried to pre-load the i386 folder onto the HD and run through DOS. I have tried to install DOS 7.1. I have tried to install XP using a Win98 Boot Disc. I have tried to install using Hiren's Boot CD.
Every time I try there is an unknown issue. When directly booting from XP cd gives a "LINE 1026 txtsetup.sif error." DOS 7.1 has a "CPU Error - Incorrect OPCODE." I have tried using another laptop to start the XP install process, then move the hard drive back to the Acer when XP setup reaches the "Remove DISC and restart computer" portion.
I cannot seem to figure out what the issue is. I have seen posts saying several of these are hardware issues, although every removable piece of hardware is either replaced or have been reset on the laptop.