Having problems burning CDs to NEC burner. Keep getting the message that the disc is full. It's just started doing this. Installed firmware 1.07 and it's still not reading the disc properly. Have cleaned it. Have tried to burn using the Windows program (whatever you call it), CDXP and Nero. It will burn one backup of Quickbooks but will not add to the cd. It's like the CD is closed, but it's not.
I have a new Toshiba laptop with win. xp profesional and I want to make a backup of all my hard drive on the DVD.I chose the backup option from win xp but after the 1st DVD is full doesn't advice me to insert the next DVD, it stops with the message:disc full.
View 2 Replies View RelatedI have a Lenovo Thinkcentre PC, with windows XP. I'm having a problem with the PC in that although I use an external hard drive to make sure the PC hard drive is not full and have very little saved on the actual PC, when I look in properties on the 'C' drive by right clicking on the 'C' drive icon, it is showing that there is 118GB used and only 26.1GB free space (total capacity 144GB). But when I go into the 'C' drive and manually explore all the different folders, there is nowhere near this much space used. Probably less than 5Gb that I can account for. I think it is drastically slowing my system, and also every few days I get a message that my computers performance is degraded and that I should defragment. I was under the impression that you didn't need to defragment anywhere near this frequently....
View 14 Replies View RelatedI have an HP computer that only has the system recovery disc and not the full xp disc. SP2 came with the install. I have an XP disc just with SP1a can I do a repair install with that and then just install SP2 after?
View 6 Replies View RelatedOem disc auto partions any hdd as 16GB os fat 32/D:\ drive NTFS raw. The Sony OEM disc(s) are pre sp1.
What steps do I take to install and get the full 200 GB to bea recoginized correctly?
On booting up my pc I get the following message before windows can be loaded.Windows has detected a consistency error on one of your discs. It then recommends I run the check disk utility. Despite doing this a number of times, I continue to get this message..what could be the cause, and how do I rectify the problem?
View 7 Replies View Relatedi am getting this error message. Windows - no Disc Exception processing message c0000013 parameters 75b4bf9c 4 75b4bf9c 75b4bf9c
i have taken a system scan with hijack this and here its, hope you can help me
Logfile of HijackThis v1.99.1
Scan saved at 17:18:40, on 29.07.2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16473) ...
I have searched for some weeks now and have seen an increase in people who also found that while viewing in the Full Screen option on You Tube and/or Hulu.com that the "Press Esc to Exit Full Screen" message that appears in the center of the screen does Not fade away after a few seconds. Of course that makes Full Screen viewing unacceptable. I posed the question to the site itself and have never received a reply. One general forum said something about Unlocking certain Files (Adobe) that were found locked because of cookie handling upon installation, but as a novice that is beyond my comprehension.In any case, is anyone aware of a fix for this problem? (That message is not suppose to stay there) I am using Win XP IE8. I tried viewing using the Firefox Browser (3.5.2) and it did not help.
View 3 Replies View RelatedPC wont boot up any more , it says there could be a currupt or missing file , it says its config system and says it might be able to repair the file using the install disc. i have a System Recovery CD-ROM
View 1 Replies View Relatedi have a labtec web cam with software but i have a dell mini and have no where to insert the disc, please help
View 1 Replies View RelatedI'm running XP Home on a Sony VAIO. The PC has a partitioned HD: C (main), & D (storage). I defrag every night.
This evening, I got the dreaded "not enough disc space to complete disc defragmenter" message. Suddenly tonight I'm showing only 2% free space on drive C. I went in and changed my System Restore percentage from 12% to 6%. Now I'm showing 6% free space (but still can't defrag).
I shouldn't have had to change my System Restore percentage tho. I'm sure that's not the culprit. Up until last night the C drive was nowhere near this full. Something's there tonight that wasn't yesterday. ...A whole LOT of something. The Defrag graph is showing a nearly FULL C drive with a LOT of red "fragmented" files"
I've been doing a bit of downloading, but after it's on the desktop (part of C), I move it to the D storage drive (which has a LOT of free space remaining).
Something's fishy. I'm no expert, but I'm thinking I need to find some type of application to tell me what's suddenly on that drive taking up all this space. Anyone have any helpful suggestions?
neither wmp 11 or roxio recognizes a blank disc. when i try to burn a disc (dvd or cd) both wmp 11 and roxio tells me to insert a blank disc. i have tried putting a disc in first, or wait for the program to tell me to insert disc but neither way works!:
View 9 Replies View RelatedMy packard bell notebook model (easynote) E-3242 running windows XP. After installing SP2, XP wont load, even in safe mode. I already used cd-bootable Knoppix to copy all documents i needed to rescue. At this point a complete Re-install would be great, but alas, no install disk came with this notebook, And i lost the recovery discs i made. I do NOT have any XP disc available.How can I begin a re-install or similiar from the Hardisk with no Discs?
View 5 Replies View RelatedI get a little confused by terms like restore vs recovery, which are often interchanged incorrectly IMO -and then there are the terms bootable disc and startup disc, which can also get confusing - and I have seen other terms used also.
please explain exactly what you mean by the "bootable XP CD". I have a new XPsp2 home edition pc, and I had a millennium before that (which I made a "startup disc" for in add/remove programs - so I guess a startup disc is yet another term for boot disc - it was only a 3-1/2" diskette (less than a meg), and it would get my millennium to boot by typing "scanreg /restore" at a prompt that you eventually came to.
For my XP, I immediately made a Compaq "recovery dvd" (it took 2-dvd's) utilizing the "Compaq recovery cd-dvd creator" in start/programs/pc tools. This dvd (can also use cd's but it takes 8 or 9 cd's I believe) contains everything that is on the pc (from the factory), and which is also in the system recovery partition D:. There is also something called a "Recovery Tools CD", which I did not burn, since it did not seem necessary, after
reading about it in the "troubleshooting and system recovery guide" that came with my Compaq. I will burn that one to, if you can explain what it will do, that I can't ultimately achieve by using the "recovery dvd". The manual said that one of the things the "recovery tools cd" did was to remove the system recovery partition (drive D), so you could use it - but I'm sure there is another way of doing that from within the pc once you got it running using the recovery dvd - am I right - I've never messed around with partitioning, since I have no need to.
My new XP did not come with any "bootable CD" per se, and I made the "recovery dvd", as stated above. So please shed some light on what the "bootable XP CD" is that you refer to (because you said that a "restore Cd is really overkill" - I assume you mean the "recovery CD" that I mentioned). Also please provide your comments on the "recovery tools CD", and any other comments you have on the various terminologies I have mentioned above.
After putting the windows XP CD in and rebooting, now whenever the computer is restarted I get the blue screen that says unable to find disc press F3 to exit setup. How do I stop this so computer will reboot normally?
View 6 Replies View RelatedWindows XP Home Edition (sp 2) HP Pavillion After I start the computer, I get this message---Red circle with a white x message states There is no disc in the drive. Please insert a disc into drive. This started this morning. Didn't have it last night when I shut it down. Have no idea why this all of a sudden started. Any help would be appreciated. I have tried clicking on cancel
comes right back. Went into Task Manager and clicked End Task.
I looking for a way to make sure my Operation System is working correctly? I have a recovery disc for Windows XP PRO, but it says that it will wipe out all of my upgrades if I use it?Is there a Service Pack 2 Recovery File that I can download to a My desktop, and then burn to a CD?
View 1 Replies View RelatedI have tried to install a new xp pro sp3 disc on a new computer but have been getting errors in the installation. I have tried 3 different times but it says that the disc is missing some components and when it is final it does not work properly.
I finally talked to a tech person that asked me if I had another disc and I have an older sp2 disc. He said to install that but when I put in the key for my new disc it does not work with my older disc. I finally put in my old key and it worked fine. THe installation went off without a hitch but I won't be able to use my old key when I activate it. When I install the sp3 download will I be able to change my key to the new disc key?
I have DVD-RAM drive in my hp laptop and i used to write DVD-R disc usually.
In the recent time i get an message when insert a dvd-r disc. The error message is
The disc is not writable
Please insert a writable disc
Disc required for compliation : DVD R/RW, DVD R DL, DVD-RAM
Disc type in the recorder VD-R
But i used the same disc before and it was half writtened already.
help me to resolve.
Note: burning software nero 7 essentils(nero smartstart)
I'm running Windows XP SP 2 and I get an error message whenever i connect my blackberry curve to the computer. if the usb device is stopped, it will go away, but other than that it won't disappear after clicking cancel. if it helps, I installed the roxio media manager only yesterday, when the error first came up. Its name is Exception Process Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6b
View 2 Replies View RelatedEvery time I switch on my machine and try to connect to the internet, I get a dialogue box: Web page is unavailable while offline. To view this page, click connect. When I click connect, I can view the page and don't get the error message again until I switch off the machine. Why does this happen?
View 6 Replies View RelatedIm fully aware of why one would'nt be able to get Windows XP to use a full four gigabytes of memory but I thought I had taken the appropriate steps to remedy the problem. Im using the 64-bit version of Windows XP Pro and I've enabled memory hole remapping in my motherboards BIOS but for whatever reason windows is still telling me im only using around 3GB of memory. What am I doing wrong?
View 14 Replies View RelatedI have an old Toshia Tecra laptop that suddenly refuses to run in full mode in XP professional. It will run in safe mode and I have tried to run anti virus etc with no problems. I have tried windows directory services restore mode. I have tried to restore a previous know working set of data. I have removed the ticks from all in startup but still the machine goes through showing the microsoft screen then goes blank and after a few minutes tries to start up again. I have noticed that when I shut down I get an end program screen of (End Program-- Sample), when clicked it says this program is not responding. I have looked through windows explorer under program files and can't see a program just called Sample.I am going into hospital shortly for a major op and wanted to use the laptop to look at DVD's to pass the time, so any help gratefully rec'd.
View 8 Replies View RelatedA msg. popped up today saying my C: drive was full.I let it clean it up, but still only have just over 600 MB free out of 15 GB. Only 2.16 GB of this is programs as I have my programs installed on another drive. Looking in my Windows folder, I found 16.8 MB of log (text) files. Can these be removed? Can I turn off whatever is creating them?I downloaded Disk Size Manager after reading some other messages on this site. It says my C: drive is 12,815.60 MB which should be 15 GB. Where is the just over 2 GB that are missing? Windows uses 4,887.88 MB. Documents and Settings is 3,090.28.Is this normal?I wish I could move the programs to my D: drive, but I can't find a way. They are only available on my computer restoration disks and it puts them where it wants to instead of letting me decide where I want them. I tried running a free program called Move It!, but it looks like they are moving but they don't.
View 14 Replies View RelatedI'm at my wits end. I was queried by my computer to clean up my hard drive because it was full. ( I wasn't downloading anything).This seemed very odd to me as I always clean up my hardrive regularly.I usually defrag my hardrive every few weeks and the last time I did it I had 29% free space. Now when I check it I have 0% free space and the hard drive has over 20000 fragmented files, I've never seen it look like this.I ran spyware and came back no threats.Something has filled up my hardrive unexplainable.I've tried a lot of things from system restore to chkdsk.
View 9 Replies View RelatedI recently purchased an HP 8530w laptop that came with an xp from Vista downgrade preinstalled. I foolishly let Windows update automatically update the OS using the Express mode. It downloaded and installed SP3 and several .NET framework patches. The laptop also came with HP Credential Manager installed. The problem I'm encountering is that even though I logon under an administrator account I can't delete files under any of the USers under documents and settings, including the administrator acciunts Everytime I try to delete a cookie, or remove some documents (under My Documents) the file management program (Explorer or PowerDesk, I use both) pauses and then shuts down, and creates an error message to send to Microsoft. In short the system will allow the administrator to administrate. Can't uninstall SP3 because it doesn't show up in Add/Remove Programs, and can't delete any of the .NET framework updates even though they are listed.
View 8 Replies View RelatedWhat would make a C: drive with only Win XP and nothing else on it fill up. It is a 10 GB drive. I installed XP Pro to it and everything else to different drives. The C: drive totally filled up and I couldn't seem to find anything to delete from it to make room. I did all the cleanup steps with no results. I have now reformatted it and am installing XP again, but would like to avoid this problem in the future if I can. Plan to use Fred Langa, of the Langa List, steps to lighten up XP, but not sure that will be enough since I don't know what caused the problem in the first place.
View 11 Replies View RelatedI use full screen programs, usually games, my pc automatically minimizes the program to show the desktop. anyone experience this? i think it is from a program i installed coz everytime i reformat my pc.
View 2 Replies View RelatedI have a 80GB HDD and I'm down to 13GB's. I'm wanting to run a DVD program, which requires my to have at least 20 GB of free space. Can any one tell me where all of my free space has gone?
View 3 Replies View RelatedI need toget to the display control to enlarge my game board please i am stupid when i do it and it took me 24 hours.
View 1 Replies View RelatedI have a computer that came with OEM Windows Me and I want to upgrade to Windows
XP Pro. Is it possible to acquire a retail upgrade version of Windows XP for that
machine?
