Every Time System Starts On Changing 3D Acceleration To 0
Aug 19, 2009
My computer started acting up, and I couldn't play any games.WoW mainly -(Yes I play it) and Cod4, So finally I managed to fix it myself and this is what I did. Went into device manager, disabled then enabled my GFX card, Then I have to go into display properties and change 3D acceleration to 0 then back to full, Also when I do this it corrects my resolution.
However, EVERY time I power down my computer, I have to do this which get's very annoying
View 9 Replies
ADVERTISEMENT
Sep 20, 2008
I've been getting an error/blue screen message when ever i start up my Acer Aspire 5650 laptop. It is a couple of years old now and,my last laptop died after about the same time so hopefully someone can shed some light.The system will start up and i can use the it with out any trouble but it is anoying to have to sit for up to 5 - 10 minutes while it runs the check every time.
View 6 Replies
View Related
Dec 16, 2006
First off, here are my computer specs (I like to get detailed): HP Pavilion a820n running Windows XP SP2
540J Pentium 4 HT, 3.20 GHz (1MB L2 cache, 800MHz front side bus)512 MB PC3200 DDR SRAM memory
200 GB 7200RPM Serial ATA hard drive.Intel Graphics Media Accelerator 900 with up to 128 MB shared video memory.Thats whats on the front of my tower. So, the title of this thread is self explanatory. I just turn on the computer and after it loads, after the desktop appears and right around when the desktop icons are loading, it just goes blank and restarts itself. Last night I did an error check for the hard drive, and it didnt come up with anything. I actually went to bed while it was scandisk or whatever, and when I got up, the computer was in its neverending cycle of resterting and crashing. I can, however, load it in safe modes, like with networking; that's what I'm using right now.
View 14 Replies
View Related
Aug 12, 2005
Every time I turn on my PC chkdsk starts up saying that my partition F is dirty, Its run several times and I have no idea what started it. I've tried the instructions in Kellys Korner but had no luck, any ideas?
View 10 Replies
View Related
Aug 25, 2005
Running XP Pro SP 2. The time is behind by about 30 minutes. If I change it manually, within a minute or so it reverts back. I DO NOT have "Use a network time server" checked. (Attempting to use a time server always fails anyway.)Where is the system getting this time from and why is it constantly changing back?
View 8 Replies
View Related
Feb 19, 2006
I don't know what's happened to my computer but it run slow as well as when it starts up it takes time and the programs don't load up at startup. Also it's very laggy(slow) It's Windows Xp(Home Edition) 2.53Mhz, 512RAM.
View 7 Replies
View Related
May 29, 2007
I've been using the same old grey colour since Win95 and would like a different colour. What's the best way of going about it? I've just installed the XP Zune theme from Microsoft from here: go.microsoft.com/fwlink/?LinkID=75078 and it looks pretty good but does it use up more memory or CPU time than the classic theme?
View 3 Replies
View Related
May 25, 2005
It happens to have the dnserror.htm and also my PC acts very strange. I have a broadband internet connection and some times i get this error and some other times it takes very long to load a site. Also, my IIS settings keep changing almost every time i start/restart my PC and that its a pain because I work on it very much.I am very concerned about it. I read in this forum that you advised some other member to run the program (Hijackthis) and to post the results in this forum.
View 1 Replies
View Related
Dec 9, 2007
Why does the time and date keep changing. I have done (I think) everything right manually and thro internet time to correct this. changes to proper time then next time I log on my computer everything is wrong again.
View 14 Replies
View Related
Sep 13, 2007
In Windows XP, is there a way to change how often the system time is updated from a time server on the Internet? Right now it is 7 days. It appears that my clock is running a bit fast.
View 7 Replies
View Related
May 24, 2006
I would like to create a script of some sort that can be run by a regular user and that can reduce the sound acceleration like in the Sound tab of dxdiag. An older game my kids run needs lower acceleration to function properly. A second script to reset it would be helpful too. I don't want to give my kids admin priv or have to set it myself before and after each gaming session.
View 5 Replies
View Related
Jun 27, 2006
My direct x agp texture acceleration is not available.
View 8 Replies
View Related
Jun 26, 2010
HI currently have from what I can see a very common and well known problem with Direct3D. My computer has DirectX 9.0c ( 4.09.0000.0904 ) installed. I assume that Direct3D comes along with DirectX and should be installed seperately. However when I click on the Diplay tab Direct Draw Acceleration, Direct 3D acceleration, and AGP texture acceleration are not available and the option buttons are grayed out.
My graphics card is Ati Radeon 9250. I have downloaded the Ati Catalyst Control center and the drivers for the graphics card, however the problem still wasn't solved . Could someone please help me out with this matter, since it's really bugging me, any help would be much appriciated. I have also included print screens that I think may be good to look at and see certain information. If any other information is needed or you have questions that please do not hesistate as I really need to get this issue sorted.
View 2 Replies
View Related
Aug 24, 2005
I bought a new laptop about 2 weeks ago. It's a Compaq Presario (? if that helps). my grilfriend is Swedish so wanted the language in Swedish. No problem. But the computer keeps restarting a few times a day without any notice. I had a look everywhere on every forum (almost) and read about this Zotob worm that turns your comp off all the time. So, from the microsoft web page i did the PC check thing, and it says it found nothing, but i downloaded the patch or something just in case, and it said it won't install because the language is in Swedish, and i only works in English. So firstly, do i have the worm thing?
View 7 Replies
View Related
Feb 5, 2008
I have a Gateway laptop that will not start up. All it says is Gateway and gives the F2 and F10 option that don't work.
View 9 Replies
View Related
Feb 12, 2006
i do scans quite a bit and delete alot of things everytime. there is the msn spyware thing that keeps coming back after i delete that, as well as many other things i dont even know about. some of my devices just shut them selves down from time to time (mouse, scanner/printer, and otherthings i cant remember but the key board is fine) and after a few seconds turn back on. and the whole thing just crashes sometimes. i did that scan thing but im not sure if i did it right.
Logfile of HijackThis v1.99.1
Scan saved at 10:57:17 AM, on 13/02/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Running processes:
C:WINDOWSSystem32smss.exe
C:WINDOWSsystem32winlogon.exe
C:WINDOWSsystem32services.exe
C:WINDOWSsystem32lsass.exe
C:WINDOWSsystem32svchost.exe.....
View 10 Replies
View Related
Sep 20, 2005
I am a computer enthusiast and I assemble my own PCs. I wanted to know how to brand the PC with custom System Manufacturer and System Model settings. I am aware of the OEMINFO.ini file but that only changes information in the Computer properties page when you right-click 'My Computer' and choose properties.But when you use dxdiag,the System Manufacturer and System Model read "To be filled by O.E.M".Could anyone please tell me how to go about changing these settings ? Changing the OEMINFO.ini file does not affect these values.OEM manufacturers like Dell, Sony have changed the settings on their products, so I'm sure it's possible.
View 3 Replies
View Related
Oct 27, 2009
I turned my pc on today which runs on Windows XP Pro. Every time the computer starts I get four or five options Safe Mode, Safe mode with Prompt, Last well know configuration, etc (most ppl know what I mean here.)
Every time I click on any of the modes my computer restarts. Just before the pc restarts I see a blue screen quickly flash (i know this is know as the 'blue screen of death'.)
I have put in my XP cd but i cant get it to run so i use recovery not even when I run it from my BIOS Screen
View 8 Replies
View Related
Aug 3, 2007
You see the problem is that when I start up my computer to Windows XP i recieve an error before the boot screen appears stating:
"Windows could not start because the following file is missing or corrupt:<Windows root>system32hal.dll.
Please re-install a copy of the above file."This is not my first site i visited to try to find a solution. I have been to many explaining all different types of solutions. Luckly I am a pretty experienced computer person and also a technician, so I have a fighting chance to try to restore my pc to the proper condition.
View 7 Replies
View Related
May 15, 2006
Windows 2000 Pro- upon startup,system cycles thru startup to end then starts all over.
View 3 Replies
View Related
Jun 11, 2008
Every time I start up my computer and goes to the desktop, there are no icons, toolbars, or even the "Start" button, it only shows the desktop background, and all I can use is the Task Manager to access a couple of programs. I tried using Norton Antivirus, but did not find anything, so I uninstalled it. My "CPU Usage" is at 0 and 1% almost dead, I saw that the explorer.exe is missing. I ran it with the Task Manager, and it made the computer reboot the wrong way. When it did, it did not go to the desktop it just showed black screen with the little "-" on the top left and couldn't do anything and the buffer is barely doing anything, you know, when you open a program, the light flashes rapidly and making noises,
View 7 Replies
View Related
Nov 18, 2006
He took it home tonight because its being playing up over the past week and yesterday it refused to boot xp. He tried the recovery console himself and im not sure what he did but upon starting the computer up xp immediately jumps into "reinstalling windows" at the install stage. It gets down to 33 minutes and the computer restarts and repeats the whole process. I cant format the drive as theres important work on it and im not going to be able to take my computer home till next weekend. I was hoping someone could offer an alternative solution to a format?
View 6 Replies
View Related
Sep 20, 2005
Let's see... I'm running a Pentium 4 (1.7 GHz) on an Intel D845GBV motherboard, with 512 MB of RAM. As for the operating system, I'm running Windows XP SP1, build 2600. I generally make it a point to keep up with Windows Update. I have both a BIOS password and a Windows password on my computer. About one out of every ten times I boot I run into problems: I enter my BIOS password with no problems, but then when Windows starts up I lose USB support. Nothing I've done has fixed the problem, which includes unplugging the keyboard (or the Biopod USB biometric scanner I have) and plugging it back up, checking the drivers, making sure I have the latest updates, and scanning for viruses/malware. A restart is the only thing that resolves the problem.
View 7 Replies
View Related
Jul 5, 2010
Yesterday while surfing on my mother's laptop all of a sudden it just froze. I just turned it off because after hitting control/alt/delete nothing happened. I was stuck. Then I restarted the laptop - the windows logo came on along with sound and then it went to a black screen with just a blinking cursor at the upper top left. It will not take me to her desktop.
View 3 Replies
View Related
Feb 6, 2007
When i start my windows XP proffessional a lot of programs are started like yahoo messenger etc and it takes lot of time for eac of these to load. So i tried "msconfig" to customize which programs to start when the system boots.But each time i start i get a message from "msconfig" program that " this is not the normal startup and suggests to revert back to normal start up (which starts all the progs).I want only specific programs to start when i my computer starts.
1)Is there a better way to change this apart from "msconfig" ?
2) How can i avoid that message that mscofig gives?
3) Are there any other problems i want only selective programs to start ?
View 6 Replies
View Related
Nov 30, 2008
I was wondering whether it's possible to change the Windows Startup sound on my PC, to another sound that a mate mixed for me?
View 2 Replies
View Related
Dec 19, 2004
I have to keep reseting my computer time every so often. It's worse when I turn on the computer. It's always ahead by about thirty minutes, I have to keep setting it back. It never stays put. (CMOS battery?) Anything I can do to fix it? Windows 2000
View 7 Replies
View Related
Jun 11, 2006
I am running windows XP. Being a student I am relying on AVG, Spybot search and destroy/ adaware. Just recently my time in windows keeps changing itself. I am worried that maybe I have a virus but my antivirus protection is not finding it.
View 19 Replies
View Related
Mar 8, 2007
I have a question. Can you take out Windows from your PC and put in a MAC operating system. I believe it's called Linux or Panther OSX but I may be wrong. Anyhow is it possible? I'm just tired of dealing with Windows crashes and security problems and a host of other headaches. Probably should have bought a Mac but that's in the future plan. If possible to make the switch would it be difficult?
View 14 Replies
View Related
Feb 22, 2005
I am running windows XP- home edition, I would liketo change my audio log in and log out music, I have some good wav files to put in there, also inquicken Deluxe 2005. I was able to change my audio in Windows ME and Quicken Deluxe 2004 but I do not see a way here
View 4 Replies
View Related
Jul 3, 2006
I have be given a EX-coworkers Laptop. Running XP Professional. In the systems properties/under the general tab it has Registered to: EX coworkers name. My boss ask me to change it to the company name. Can this be done.
View 7 Replies
View Related
