Direct X Agp Texture Acceleration Not Available

Jun 27, 2006

My direct x agp texture acceleration is not available.

View 8 Replies


ADVERTISEMENT

Installing DirectX/3D: AGP Texture Acceleration Are Not Available?

Jun 26, 2010

HI currently have from what I can see a very common and well known problem with Direct3D. My computer has DirectX 9.0c ( 4.09.0000.0904 ) installed. I assume that Direct3D comes along with DirectX and should be installed seperately. However when I click on the Diplay tab Direct Draw Acceleration, Direct 3D acceleration, and AGP texture acceleration are not available and the option buttons are grayed out.

My graphics card is Ati Radeon 9250. I have downloaded the Ati Catalyst Control center and the drivers for the graphics card, however the problem still wasn't solved . Could someone please help me out with this matter, since it's really bugging me, any help would be much appriciated. I have also included print screens that I think may be good to look at and see certain information. If any other information is needed or you have questions that please do not hesistate as I really need to get this issue sorted.

View 2 Replies View Related

Reduce Sound Acceleration

May 24, 2006

I would like to create a script of some sort that can be run by a regular user and that can reduce the sound acceleration like in the Sound tab of dxdiag. An older game my kids run needs lower acceleration to function properly. A second script to reset it would be helpful too. I don't want to give my kids admin priv or have to set it myself before and after each gaming session.

View 5 Replies View Related

Deleted Texture Files Again On Desktop After Restart Computer

Jun 22, 2005

By mistake I unzipped some Microsoft Flight Simulator texture files to my desktop [from a safe site I have been using for years] instead of the intended FS04 folder. I deleted the files and cleared the recycle bin, the next time I turned on the system all the files were on the desktop again. I restored the system back a few days before the files were unzipped, no luck, the files reappear every time my computer is turned on.

View 2 Replies View Related

Every Time System Starts On Changing 3D Acceleration To 0

Aug 19, 2009

My computer started acting up, and I couldn't play any games.WoW mainly -(Yes I play it) and Cod4, So finally I managed to fix it myself and this is what I did. Went into device manager, disabled then enabled my GFX card, Then I have to go into display properties and change 3D acceleration to 0 then back to full, Also when I do this it corrects my resolution.

However, EVERY time I power down my computer, I have to do this which get's very annoying

View 9 Replies View Related

Direct X Update: DX 9b To DX 9c?

Aug 3, 2005

I can't get DX 9b to update to DX 9c. I know it has to do with the fact that I slipstreamed SP2 v .2096 when I installed windows. what things to delete in the registry to allow for DX 9.0c to install over the 9.0b version.

View 13 Replies View Related

Direct 3D Not Working

May 21, 2006

Whenever i use a program that uses Direct3D, it closes leaving an error message that relates to Direct3D, and then it asks me to run DXDIAG,

View 14 Replies View Related

VGA Do Not Support Direct X 9.0

Aug 14, 2009

So I decided to play Mabinogi again , a RPG game, installed my driver, downloaded Direct X 9.0 , but when I checked DXDIAG, the current version of direct x was still 8.1. I have a the Radeon X300/X550 series for my VGA. Is my VGA perhaps too old to support Direct X 9.0? Or can you show me how to overwrite 8.1 with 9.0.

View 17 Replies View Related

Display Properties And Direct X 9.0

May 24, 2006

I am using windows XP on my laptop. I am unable to change the background on my Desktop and staays on NONE whatever I click and cannot add pics to it either.Also I cannot download DirectX 9.0 either from a games disc or the internet any suggestions please would be very welcome.

View 14 Replies View Related

Direct To Desktop Without Sign-in

Jul 26, 2006

I want to go directly to the desktop without having to go through that sign-in box that appears. How can I do this?

View 7 Replies View Related

Direct X & ATI Program Installation

Nov 19, 2004

First, when I go to install the ATI software and the installation screen for Windows XP Driver comes up....I get a Severe warning saying "Zero Device Instance Error" button. What does that mean? The rest of the installation goes fine but the TV tuner part will not work.It says Direct X is not installed and that there is no capture device.So, I tried to install Direct X again. When I go to install Direct X 9.0 I get a message that the "framedyn.dll" file cannot be found, so Direct X does not install properly.

View 14 Replies View Related

Microsoft Direct X Drivers Redistributable

Jul 31, 2006

As I understood the information about this software (on MS site) I thought it was supposed to be a 'must have', or at least a 'should have'. I checked that my computer was found to be suitable, and I downloaded it from CNET (of course). It's on my computer somewhere...I think, on finishing the download I was required to declare somewhere to install it and I have absolutely no idea where that should/could be. Normally a download is followed by an automatic installation point and I just accept that suggestion. OK, hopeless, I'll say it for you! Can you possibly tell me...nicely...what I should now do? I have ie6 though seldom use it, preferring Firefox as recommended by so many here.

View 7 Replies View Related

No Internet With Direct Connection / Only Wireless

Apr 20, 2006

I have a Gateway laptop running XP Media Center edition that connects wirelessly to a Linksys router. It works fine that way, but when I plug the ethernet cable in directly to the DSL modem and shut down the router, I get the "page cannot be displayed" message, even though the icon shows that I am connected and the lights are green. I know it is just something with my settings, but cannot get it figured out. I would like this to work, because a direct connection downloads faster and sometimes the wireless does not work due to interference.

View 6 Replies View Related

Difference Between System Builder OEM And Direct Buyer OEM

Apr 21, 2008

I am trying to restore an HP PC that shipped with XP Home OEM. The restore disk is damaged and a few files in the i386 folder are unreadable. My ultimate goal is to reinstall XP home without purchasing another license because technically I still own the license, but the CD is damaged.

My question is. Is there a difference between the OEM version the HP used and the OEM version that I purchased with hardware? Is it possible to install my OEM version with the serial number on the PC?

I was also pondering trying to recreate the disk by replacing the damaged files in i386 folder with files from another version of home OEM using nlite.

View 6 Replies View Related

MS Dos Games Wont Run / Asking For Direct Hardware Access?

Jul 9, 2005

Recently, I tried to run some old MS-DOS games under WinXP. However, none of my games was able to run (because all these games use the file DOS4GW.exe, which requires direct hardware access and extended memory, not supported by the command line)I tried every emulator i found on the net (DOSbox, Virtual PC, Virtual Machine) but nothing,So i decided to make a DOS boot disk . Everytime, i insert the disk, i will boot to pure DOS, and when i eject the disk, Windows XP will load.

View 8 Replies View Related

Disabling Password Protection - Direct Desktop

Jan 14, 2009

when I turn on my pc (running xp), I get a password popup, and upon completing the information, startup is resumed.it's always me using the pc. how can I disable this password protection so that when I turn the pc on, it'll take me directly to my desktop w/o any password requests, etc.

View 9 Replies View Related

Getting Balloon At Startup Telling Direct CD Will Cause OS Instability?

Feb 14, 2005

Win XP Home. Just gone over to XP, on Start up a baloon appears, "Direct CD will cause Windows to become unstable. Windows has prevented these drivers from loading. Click here for more details". When clicking it directs me to a Direct CD, Roxio mentioned page which quotes, "A driver is installed that causes stabiblity problems with your system. this driver will be disabled. Please contact the Manufacturer for an update compatible with this version of Windows.
I do have a problem saving data to CD/DVD with the Windows supplied facilities and have had NERO installed

View 10 Replies View Related

Checkdisk Error Cannot Open Volume For Direct Access

Feb 21, 2006

This problem started happening randomly and now I cannot run checkdisk at all on reboot. Basically I cannot run Checkdisk at all on my OS drive because it always says in Windows that it is in use and needs to run the scan on next reboot. After I reboot, the above error message displays (see thread title).I've ran a virus scan and spyware/adware scans and I'm now pretty sure that it isn't the issue. I've tried disabling all non-essential services in services.msc and disabling all startup items under msconfig.exe, neither of which made any difference.I'm really beating my head against the wall on this one, I have no idea what the cause is?

View 13 Replies View Related

Direct Parallel File Transfers Aren't Working

Aug 23, 2005

I used this Parallel marked especially for Direct Connection file transfer. Now. I set up this connection on both computers. both have Windows XP, both are Service Pack 2. One as the host, and one as the guest. however. while I can directly connect the two, niether of the computers show in terms of shared files or even workgroup computers. I don't know how to get this to work, and I cannot afford any USB cables.

View 7 Replies View Related

Formatting Hard Disk: Sp3 Installation Requires Sp2 Or Direct Install?

Jul 29, 2008

Yeah I have reformatted my hard drives a few times over the years so I am no stranger to it however I am just curious about something. When I go to reformat with my DELL Windows XP Home Edition CD I will then revert back to SP1. I have SP3 installed onto my computer right now. I also have a SP2 CD I got from Microsoft about 3 years ago or so. Should I first install the SP2 cd or is there no need to do that seeing SP3 should have all of SP2 updates in it?

View 7 Replies View Related

Check Disk Won't Work / Cannot Open Volume For Direct Access

Feb 11, 2006

Last night I set my computer to check and repair the disc. I have done it many times before successfully. But when I rebooted I got the message "Cannot open volume for direct access Windows is finished checking the disk" Then windows starts up. How do I fix this?

View 9 Replies View Related

Bare Bones Kit From Tiger Direct - Couldn't Switch Hard Drives

Nov 7, 2007

i am thinking about upgrading from my dell precision 420 to a new barebones kit from tigerdirect (barebone kit : Click here. ) And i wanted to buy that, get the fan, and just switch the graphics card and my hard drives. But, i was talking to a friend and he said i couldn't switch the hard drives cause it could cause problems with windows.... so my question is... can i use my hard drives from my dell precision (they are not stock hard drives), and just throw them in to my new barebones kit?

View 12 Replies View Related

Way To Access Bios Of Computer With Another Computer / Via Direct Link Or Route

Aug 24, 2005

Is there any way to access the bios of a computer with another computer, via a direct link or a router? I am sure that the bios have been affected and attempts to boot from either a floppy or cd get ignored in the loading process and the bios canot find the module to activate the periferal devices ie: keyboard, mouse, usb ports. I am at a total loss of how to do this.

View 8 Replies View Related

Install Direct X Without Re-Install Operating System

Jan 23, 2008

Accidentally removed my Direct X from my machine Win XP SP2 32bit. Now when i do dxdiag, in the system tab it shows directX version: not found. Is there anyway to restore this directX without having to re-install windowx again?

View 13 Replies View Related

Cant Connection To Internet - Tried Direct Connection

Apr 13, 2005

I got a Toshiba with windows XP.. Its an older laptop and runs slow.. which is fine for what i need it for.. It is connected through a Dlink Cable modem. Recently moved and had a DSL connection of 3 years no problems. Had to switch to cable broadband. The lights all light up solid no problem. Network cable connected to no problem. Problem : NO internet

Unplug netowkr cable from cable modem (get the network cabled unplugged in windows, so it is seing the modem or atleast talking to it)Tried using the windows xp network srtup wizard. I did that hub one (connected thourhg a hub) and i tried the direct connection (goes from modem to computer).

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved