Very Slow Computer Operation
Jan 10, 2008
I have Windows XP Home Edition on HP Pavilion dv1000 series laptop. I installed AutoCAD2008 from their web site a few months ago. I found that it immediately slowed down my computer, even though I more than met their minimal installation requirements. After a week, I purchased a new computer to run ACAD, and uninstalled the program (except for the free DWF viewer) from my laptop. My laptop remained really slow. I tried to do the system Restore, but my computer was unable to go back to the date selected. I believe I defragged etc. after the uninstall, but am not 100% sure I did.
When I start the laptop first thing, the time showing doesn't change, even though minutes are passing. It takes about ten minutes from turning on the PC to getting Internet Explorer to open up. Or even to run Solitaire or open Notepad. I wonder if my ZoneLabs Security System is causing some of this slowness. Lately, I've been having to turn off the power to my laptop manually to get it to shut down.I regularly edit and keep my start up programs to a minimum, but include the programs Mozy (backup) and ZoneAlarm Security. I ran HijackThis and the log file is below. I've been puzzled why ZoneLabs has two scanning processes running at the same time.
View 14 Replies
ADVERTISEMENT
Jan 3, 2005
Computer: 2004 Presario, 2.6 Gig Processor, 512 MB RAM, 120 Gig HD, under warranty.Operating System: XP SP1.Comments: Runs like a 286; very slow moving from program to program; slow when shutting down. Complete disk wipe system recovery has been done; non-disk wipe system recovery has been done; Ad-Awre SE installed, Current Noron anti-virus installed and updated. Sytem set for "fastest operation".
View 14 Replies
View Related
Apr 3, 2009
Dell computer with Windows XP SerPac 2.Computer boots very slowly - about 5 minutes. I have cleaned out the startup files, defraged, used several registry cleaners, etc., but no luck.Tried to boot from the OEM-supplied XP CD but system doesn't recognize it. Tried to go to setup and repair/reinstall operating system by pressing F8 on startup but doesn't work.
View 2 Replies
View Related
May 25, 2008
I had a slow computer operation problem previously, and using the support here was able to fix it. I'm having the excrutiatingly slow operation again, where I click something like Solitaire, and it takes 2 to 4 minutes to run it the first time.
View 14 Replies
View Related
Jul 18, 2005
I recently returned my notebook to the manufacturer due to a failed DVD-drive.They replaced the DVD-drive and the main board, but now the computer is very slow. It takes over 5 minutes to boot-up and the most basic operations take an age.Is there a solution that doesn't involve a full system recovery, as their helpdesk is recommending?
View 2 Replies
View Related
Aug 20, 2009
my problem is that when I try to run the ''Regedit" or active any register key, I get this message "this operation has been cancelled due to restrictions in effect on this computer please contact your system administrator" and when I login as administrator I get the same message.
View 4 Replies
View Related
Aug 30, 2005
Error message "Operation has been cancelled due to restrictions in effect on this computer. Contact system administrator." I want to clear my cache. What do I do?
View 1 Replies
View Related
May 10, 2010
Lately my computer has been extremely slow, not just internet slow but onboard slow. For example, if I click on an application from the desktop it will sit there for 10-20 seconds before anything happens. Occasionally I'll click multiple times on something and nothing will happen then 30 seconds later it will open multiple instances of things. This delay has been happening with just about anything I click on, acting like the computer's busy doing something else when nothing else should be going on. I've looked in the task manager and the applications column will be blank
View 14 Replies
View Related
Dec 23, 2008
This is a Windows XP sp3 domain connected PC with one specific user, which all of a sudden takes 2.5mins to log in to the domain, Where it used to take just about 20 seconds. Other users on the same PC is all OK 20sec login This is not the usual where it hangs at "applying computer settings" or "personal settings" it's after those two has passed that it just hangs for a couple of minutes.
All i get is the mouse pointer (not even hourglass) and the desktop wallpaper for about 2-3 minutes. When it finally logs in everything is as quick as you would expect that spec of PC to be (1,6ghz Sempron, 1gb RAM, 40gb IDE-100 HDD)
View 1 Replies
View Related
Sep 26, 2006
computer now takes half an hour to an hour to reboot. in doing so, it tells me that it does not do the startup and services. it is so slow it is unbelievable. sometimes even being so slow that the words we type take a few seconds to show up on the screen. after working for a time it will invariably hang. or it will shut itself down. in either case we have to reboot, it takes that half an hour to an hour again
View 6 Replies
View Related
Jan 4, 2006
My pc was working just fine a few days ago then last night i go on it was just dragging.Everything was loading slow despite the fact i have even firefox was loading slow which it never does.Anyway i asked my sister who was the last one on if she clicked on anything but no surprise the reply was I didn't do anything so i guess it was a ghost .I ran NAV but nothing found then again NAV doesn't seem to find anything
View 6 Replies
View Related
Sep 8, 2006
Pc taking for ever to load, mouse slow too...
View 6 Replies
View Related
Nov 22, 2009
I am running PC, Windows XP and recently had several viruses deleted from system. Problem started when running Internet Explorer and would receive an error tab every time stating IE must close. The data error was a mcsvrt.dll problem. Now when I start the computer it takes 10-15 minutes to boot completely and accessing Mozilla or any apps after about 3-4 mins takes ages. It runs so slow, something has it almost completely bogged down. I run spybot but after a while it freezes up
View 3 Replies
View Related
Oct 23, 2006
It can't even seem to keep up with my typing. Ugh. I use AVG free, and it is current and doesn't detect any problems.
View 14 Replies
View Related
Aug 30, 2007
I have an HP. Personally, I think it's a great computer but it's extremely slow and it crashes randomly. Also, I keep losing internet connection. My ISP is cox and I also have vonage so they're connected to each other
View 2 Replies
View Related
Oct 9, 2008
I am working with a Dell 2400 running Windows XP Service Pack 3 with a Pentium 4 2.8 GHz processor and 1.2 gig of ram. It still seems particularly slow. I am not sure if it some of the applications that I am running like Norton 360 or some of my settings.
View 6 Replies
View Related
Aug 7, 2005
Win XP HE SP2. Dell 8300 3.0 Ghz .PC takes minutes from startup to desktop. All programs much slower than usual.I regularly use Defrag, Have Microsoft anti spyware, Panda anti virus, Ad Aware Spybot, System Mechanic Pro.etc.Have tried everything!
View 9 Replies
View Related
Jan 23, 2009
Why is it taking my computer 3 minutes to boot to the desktop? As you can see from my signature below, I don't have exactly a slow poke machine. All drives are defragged weekly, the BIOS is set to boot off of the hard disk, and I only have the one OS installed.This thing use to boot to the desktop in 20 seconds.
View 12 Replies
View Related
Jul 20, 2010
My pc hangs up in almost all operation.mostly when i restart my computer its happens.any virus attacked is this.
View 1 Replies
View Related
Jan 19, 2005
I am having a problem with XP Pro Freezing during operation. The problem began after installing a Dail-up modem ("DYNEX" MOD# DX-M100) and loading the drivers for said Modem and a windows hardware update for the modem (that failed to install). First I had Blue Screenc ( c0000005 ) and stop errors ( 0X 000000D1 ). I then removed hardware and restored to previous state but continued blue screens. after some checking disabled "Norton antivirus" auto protect and have had no more Blue Screens. However the problem with freezing remains.
View 14 Replies
View Related
Mar 3, 2005
Out of the blue, my computer started getting slow. Sometimes its ok, and then it will be on the verge of freezing.. then get itself back together. I realized, when I start up, it takes FOREVER. It also shows this screen I have never seen before. Its completely black, and has a line of grey rectangles from side to side. and slowly loads across. When it is finally finished 10-15 minutes it will slowly start up in regular fashion
View 14 Replies
View Related
Jul 9, 2005
I created another user on my XP home edition machine to isolate "business"
Logged on as my alter ego, I needed to open a Visio file. It asked for the master disk, and I proceeded to install (even though Viso is already installed for me to use as the prime user). I got a message that the Administrator had blocked this kind of activity.
How did I block it? And more important, how do I unblock it?
View 1 Replies
View Related
Dec 14, 2007
I started having these problems a few days ago. The main one is that when I try to go to Tools/Internet Options in Internet Explorer,I get the message "This operation has been cancelled due to restrictions in effect on this computer." I get a similar message when I try to save changes when exiting msconfig. Needless to say, I am the administrator and the only one who uses the computer, so it's not a restriction/permission issue. My problem is that my registry path doesn't match up to what is shown above. After I get to Policies/Microsoft there is no Internet Explorer folder in either of those two paths. If I start from CURRENT USER, the only folder under Policies/Microsoft is System Certificates, and if I start from LOCAL MACHINE, the only folders are Conferencing, System Certificates, Windows, and Windows NT. I tried searching the whole registry for "restrictions" and found nothing. So what do I do now?
View 11 Replies
View Related
May 26, 2005
At present, I have a screen that keeps saying 'error loading operating system'. To start I had Wn98se, installed WnXP Pro. The files and settings transer wizard did it's thing copying but didn't work upon install. I have 98 start up disk .. but nothing for the XP. (Was having trouble with update downloads / installs from micro.) but over all the system was working fine. I have Norton 05 Premier / goback if I can get to it. I just installed a new hard drive, 'Steup' had identified hd but I never got windows to open. Can't say that I know what happened,, seems to me that it asked about partitions. I do not understand much about that, never have changed or used. My guess, they work like seperators on task bar?? Next I think it wanted to install OS, I figured okay, but why?, it should already have XP on it (old drive) I left old as primary. Then it got to where it was saying it would 'format'. Wait a minute, I know enough to know I'd lose everything, so I rebooted. I've tried a number of time to see if I missed something. I finely decided to open the pc, disconnect the new drive and get back on track. I've tried the 'F8', pays no attention to that. I thought if I could get in to safe mode, I could use my 'GoBack' - which would clear out mistakes or whatever is causing trouble.
I can get a screen that asks if I want to boot from ST32 (my old), from CD-Rom, floppy and SCSI (whatever that is?). I've tried the hd, still get the error. I dont have any start up devices (was waiting to make -trble with the updates yet). So I put my WnXP disk in and same error,, but if I fool around with it (time it just right) I can get it to where it wants to install. "Welcome to setup" it can set up xp. Gives me a partition that looks like what I'd expect my hd to look like, scary part is the free space is the same amount. Have option of 8MB space, that won't work,, tried it . So I'm brave and hit in stall on what I think is my old hard drive. I then get told it has to "format",that's such a nasty word. I have not gone any further. I have a choice of NTFS / 32,, old was 32. Before I go further is there a floppy / disc / download / a tool, that I could purchase to get into safe mode? I thought I'd give my old 98 Norton Rescue floppy a try - nope, but I got what loked like dos prompt. I just didn't know how to move from the A:> to a command that would get me into safe mode. Or better yet, my WNXP I had running. I read here that there wasn't any problem with using NTFS and 32 on same pc. I'm wondering if I have to should I pull the old hd connection (just to be sure), install the new hd get it up and running and then later come back to transferring what I want. OR because my old was 32, stick with 32, and not set myself up for more problems?? I have a full back up on CD of my old HD, would there be anything there I could use to get back into safe. Sorry I'm not better at this,, if I were I'd probably not be in this mess. Could it be I have a bad XP? They been trying to clear up the 'update' thing but nothing has worked.
View 6 Replies
View Related
Sep 21, 2006
my printer seems to have disconnected itself from the computer. Upto now, everything was fine, but when I went to print something, nothing would happen when I clicked the 'print' button.However, after I tried printing from notepad, it still comes up with 'Operation could not be completed.I reinstalled all my printer programs, (I HAVE A CANON MP130) but still no results.
View 10 Replies
View Related
Feb 5, 2006
Within a thread on this page titled ''Windows XP Slow Shutdown'', member ''caktus'' answered the original post thusly:
I beleive applies if the fragmentation may drastically affect the operation of Windows. Regular or even daily defragmenting will [help] keep the machine operating at peak performance. It also means defregmentation time may be reduced form many minutes to as little as seconds.
This has been a question I've never really looked into, but has been on my mind for quite some time, since I had remembered reading that one shouldn't defrag on a continual basis. I just looked under the ''help'' section within ''Defragmentation'' in XP which states:
View 4 Replies
View Related
Jun 29, 2005
The option "Automated System Recovery Wizard" shows (at the end before the real start of the backup) the message "The files for the recovery diskette could not be created. The operation was aborted."
View 1 Replies
View Related
Aug 4, 2005
I keep recieving the message: Unexpected Error Due to an Overflow or Underflow of the Arithmetic Operation. What do you do to repair that?
View 6 Replies
View Related
Mar 27, 2005
i have been trying to do a system restore for the last week but every time i try i get an error after it's rebooted to say system restore was unable to restore my system as operation is incomplete.i have tried many different restore points but i always get the same error msg
View 6 Replies
View Related
Jul 7, 2006
Resolved a SpySheriff problem yesterday through Security forum and now having a Mozilla problem, Techguy suggested a post here to try and resolve it.On XP SP2. Upgraded to newest Mozilla 2 days ago. Since then keep getting 'Illegal Operation in Plug-in Shockwave Flash' This pops up repeatedly and after few times being closed it shuts down Mozilla.
View 9 Replies
View Related
Jun 3, 2005
I tried to access Microsoft Press Interactive Training and receive a message that a file that is required for normal operation is missing. That I should reinstall it from my cd . Im the only user on this computer and havent deleted anything related to this file. I only delete cookies and temporary files.
View 4 Replies
View Related
