Fragmentation May Drastically Affect The Operation
Feb 5, 2006
Within a thread on this page titled ''Windows XP Slow Shutdown'', member ''caktus'' answered the original post thusly:
I beleive applies if the fragmentation may drastically affect the operation of Windows. Regular or even daily defragmenting will [help] keep the machine operating at peak performance. It also means defregmentation time may be reduced form many minutes to as little as seconds.
This has been a question I've never really looked into, but has been on my mind for quite some time, since I had remembered reading that one shouldn't defrag on a continual basis. I just looked under the ''help'' section within ''Defragmentation'' in XP which states:
View 4 Replies
ADVERTISEMENT
Sep 29, 2007
I've been trying to optimize my XP system to run as good as it possibly can, free from fragmentation, junk files, spyware etc. I've come up with a few programs that I want to ask people about. Spybot S&D 1.5 (the new one), Advanced Windows Care, CCleaner, and Glary Utilities. I have on my computer, only AWC because it can do almost all of what CCleaner does and it also has something similar to the "Immunize" function in Spybot and I heard it's bad to have more than one of those kinds of things happening at once. Could someone let me know how many of these programs I can or should be running? Are they all able to run fully (meaning that I'm able to immunize in Spybot and immunize in AWC and Glary for example) together, or are there some that I can't run if I am running others.
View 8 Replies
View Related
Dec 3, 2006
I am currently on Windows XP sp1, home, and have been unsure about upgrading to sp2.
My ISP is ATT/Yahoo DSL and I have a wireless home network. My desktop connects directly to the router and the laptop connects via wireless. My printer which is connected to the desktop is also accessed by the laptop.
Will upgrading to sp2 affect any of my network or ISP settings? Not knowing how my network will be affected is what is keeping me from upgrading both the desktop and laptop.
View 5 Replies
View Related
Jan 23, 2005
I have 2 computers, one is a HP laptop and the other is a desktop pc, and they are both running kind of slow. I've heard that installing more memory would help speed up the computer. I've been to a site where you can enter your computer model and they will tell you what memory is right for your computer, I have no problem finding out the memory for my laptop but I have a problem looking for memory for the desktop pc. It was a HP Pavilion 8655c but I installed a different cd writer and a dvd writer, upgraded the motherboard and upgraded from a Pentium 3 to a Celeron 4 processor, and I was told that this is now a custom built pc. I was told when I bought the motherboard that I could install over 4 mb's of RAM and I am currently running on 248 mb. How can I find out what memory that I need to install on this computer? I scan for viruses and spyware/adware frequently, and neither are installed on either of my computers. I have deleted the temporary internet files, uninstalled some programs that I don't use that often, disabled everything that starts at startup, and defragmented the hard drives. Other than installing more memory, what else can I do to speed up my computers? My laptop runs off of Windows XP home/512mb of ram/30 gb hard drive.
My desktop pc runs off of Windows XP Pro/248 mb of ram/1 hard drive is 30 gb and the other is 120 gb. If there is any other info you need to help me speed up my computers please let me know.
View 7 Replies
View Related
Dec 2, 2007
I officially give up my stubborn dogged quest to learn, comprehend, and apply everything I should know about what's running on my PC - what each process does, what program(s) it/they originate in, what other services depend upon them, or whether or not I'll be able to brush my teeth if it/they isn't/aren't running. I don't want to know that rolling back a certain driver or manually installing a .dll file will enable some non-essential process to convert anti-aliased vector lines to maximized battery life, or how some helper file will allow QuickTime to covertly play the contents of Huge Jackman's iPod on my Fisher Price boom box. I concede that I'm incapable of grasping neither the logic (if there is any) nor the specifics relative to the phenomena that is computer science.
View 10 Replies
View Related
Aug 8, 2007
10-15 minutes after i have turned my computer on i get a windows error message saying: Generic Host Process for Win32 Services has found and error and closed it.Something like that, i have translated it from danish. I really dont know what it means and how to solve it, but the error cause my sound to stop working and i can only get it back by reinstalling the drivers. The error also sometimes affect my windows display so it looks more like windows 98.
View 14 Replies
View Related
Jul 20, 2010
My pc hangs up in almost all operation.mostly when i restart my computer its happens.any virus attacked is this.
View 1 Replies
View Related
Jan 19, 2005
I am having a problem with XP Pro Freezing during operation. The problem began after installing a Dail-up modem ("DYNEX" MOD# DX-M100) and loading the drivers for said Modem and a windows hardware update for the modem (that failed to install). First I had Blue Screenc ( c0000005 ) and stop errors ( 0X 000000D1 ). I then removed hardware and restored to previous state but continued blue screens. after some checking disabled "Norton antivirus" auto protect and have had no more Blue Screens. However the problem with freezing remains.
View 14 Replies
View Related
Jul 9, 2005
I created another user on my XP home edition machine to isolate "business"
Logged on as my alter ego, I needed to open a Visio file. It asked for the master disk, and I proceeded to install (even though Viso is already installed for me to use as the prime user). I got a message that the Administrator had blocked this kind of activity.
How did I block it? And more important, how do I unblock it?
View 1 Replies
View Related
Jan 10, 2008
I have Windows XP Home Edition on HP Pavilion dv1000 series laptop. I installed AutoCAD2008 from their web site a few months ago. I found that it immediately slowed down my computer, even though I more than met their minimal installation requirements. After a week, I purchased a new computer to run ACAD, and uninstalled the program (except for the free DWF viewer) from my laptop. My laptop remained really slow. I tried to do the system Restore, but my computer was unable to go back to the date selected. I believe I defragged etc. after the uninstall, but am not 100% sure I did.
When I start the laptop first thing, the time showing doesn't change, even though minutes are passing. It takes about ten minutes from turning on the PC to getting Internet Explorer to open up. Or even to run Solitaire or open Notepad. I wonder if my ZoneLabs Security System is causing some of this slowness. Lately, I've been having to turn off the power to my laptop manually to get it to shut down.I regularly edit and keep my start up programs to a minimum, but include the programs Mozy (backup) and ZoneAlarm Security. I ran HijackThis and the log file is below. I've been puzzled why ZoneLabs has two scanning processes running at the same time.
View 14 Replies
View Related
May 25, 2008
I had a slow computer operation problem previously, and using the support here was able to fix it. I'm having the excrutiatingly slow operation again, where I click something like Solitaire, and it takes 2 to 4 minutes to run it the first time.
View 14 Replies
View Related
Dec 14, 2007
I started having these problems a few days ago. The main one is that when I try to go to Tools/Internet Options in Internet Explorer,I get the message "This operation has been cancelled due to restrictions in effect on this computer." I get a similar message when I try to save changes when exiting msconfig. Needless to say, I am the administrator and the only one who uses the computer, so it's not a restriction/permission issue. My problem is that my registry path doesn't match up to what is shown above. After I get to Policies/Microsoft there is no Internet Explorer folder in either of those two paths. If I start from CURRENT USER, the only folder under Policies/Microsoft is System Certificates, and if I start from LOCAL MACHINE, the only folders are Conferencing, System Certificates, Windows, and Windows NT. I tried searching the whole registry for "restrictions" and found nothing. So what do I do now?
View 11 Replies
View Related
May 26, 2005
At present, I have a screen that keeps saying 'error loading operating system'. To start I had Wn98se, installed WnXP Pro. The files and settings transer wizard did it's thing copying but didn't work upon install. I have 98 start up disk .. but nothing for the XP. (Was having trouble with update downloads / installs from micro.) but over all the system was working fine. I have Norton 05 Premier / goback if I can get to it. I just installed a new hard drive, 'Steup' had identified hd but I never got windows to open. Can't say that I know what happened,, seems to me that it asked about partitions. I do not understand much about that, never have changed or used. My guess, they work like seperators on task bar?? Next I think it wanted to install OS, I figured okay, but why?, it should already have XP on it (old drive) I left old as primary. Then it got to where it was saying it would 'format'. Wait a minute, I know enough to know I'd lose everything, so I rebooted. I've tried a number of time to see if I missed something. I finely decided to open the pc, disconnect the new drive and get back on track. I've tried the 'F8', pays no attention to that. I thought if I could get in to safe mode, I could use my 'GoBack' - which would clear out mistakes or whatever is causing trouble.
I can get a screen that asks if I want to boot from ST32 (my old), from CD-Rom, floppy and SCSI (whatever that is?). I've tried the hd, still get the error. I dont have any start up devices (was waiting to make -trble with the updates yet). So I put my WnXP disk in and same error,, but if I fool around with it (time it just right) I can get it to where it wants to install. "Welcome to setup" it can set up xp. Gives me a partition that looks like what I'd expect my hd to look like, scary part is the free space is the same amount. Have option of 8MB space, that won't work,, tried it . So I'm brave and hit in stall on what I think is my old hard drive. I then get told it has to "format",that's such a nasty word. I have not gone any further. I have a choice of NTFS / 32,, old was 32. Before I go further is there a floppy / disc / download / a tool, that I could purchase to get into safe mode? I thought I'd give my old 98 Norton Rescue floppy a try - nope, but I got what loked like dos prompt. I just didn't know how to move from the A:> to a command that would get me into safe mode. Or better yet, my WNXP I had running. I read here that there wasn't any problem with using NTFS and 32 on same pc. I'm wondering if I have to should I pull the old hd connection (just to be sure), install the new hd get it up and running and then later come back to transferring what I want. OR because my old was 32, stick with 32, and not set myself up for more problems?? I have a full back up on CD of my old HD, would there be anything there I could use to get back into safe. Sorry I'm not better at this,, if I were I'd probably not be in this mess. Could it be I have a bad XP? They been trying to clear up the 'update' thing but nothing has worked.
View 6 Replies
View Related
Sep 21, 2006
my printer seems to have disconnected itself from the computer. Upto now, everything was fine, but when I went to print something, nothing would happen when I clicked the 'print' button.However, after I tried printing from notepad, it still comes up with 'Operation could not be completed.I reinstalled all my printer programs, (I HAVE A CANON MP130) but still no results.
View 10 Replies
View Related
Jul 18, 2005
I recently returned my notebook to the manufacturer due to a failed DVD-drive.They replaced the DVD-drive and the main board, but now the computer is very slow. It takes over 5 minutes to boot-up and the most basic operations take an age.Is there a solution that doesn't involve a full system recovery, as their helpdesk is recommending?
View 2 Replies
View Related
Jun 29, 2005
The option "Automated System Recovery Wizard" shows (at the end before the real start of the backup) the message "The files for the recovery diskette could not be created. The operation was aborted."
View 1 Replies
View Related
Aug 4, 2005
I keep recieving the message: Unexpected Error Due to an Overflow or Underflow of the Arithmetic Operation. What do you do to repair that?
View 6 Replies
View Related
Aug 20, 2009
my problem is that when I try to run the ''Regedit" or active any register key, I get this message "this operation has been cancelled due to restrictions in effect on this computer please contact your system administrator" and when I login as administrator I get the same message.
View 4 Replies
View Related
Mar 27, 2005
i have been trying to do a system restore for the last week but every time i try i get an error after it's rebooted to say system restore was unable to restore my system as operation is incomplete.i have tried many different restore points but i always get the same error msg
View 6 Replies
View Related
Jul 7, 2006
Resolved a SpySheriff problem yesterday through Security forum and now having a Mozilla problem, Techguy suggested a post here to try and resolve it.On XP SP2. Upgraded to newest Mozilla 2 days ago. Since then keep getting 'Illegal Operation in Plug-in Shockwave Flash' This pops up repeatedly and after few times being closed it shuts down Mozilla.
View 9 Replies
View Related
Aug 30, 2005
Error message "Operation has been cancelled due to restrictions in effect on this computer. Contact system administrator." I want to clear my cache. What do I do?
View 1 Replies
View Related
Jun 3, 2005
I tried to access Microsoft Press Interactive Training and receive a message that a file that is required for normal operation is missing. That I should reinstall it from my cd . Im the only user on this computer and havent deleted anything related to this file. I only delete cookies and temporary files.
View 4 Replies
View Related
Sep 13, 2005
I'm trying to open web links and file links in any of the Office 2003 products, for example Outlook. I click the link to open it, and an error message appears: This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.
View 1 Replies
View Related
Sep 11, 2007
Every 2 minutes i have the message on my laptop windows security potential spyware operation . your computer is making unauthorized copies of your system and internet files . run full scan now to pervent any unathorised access to your files click here to download spyware remover. Avast doesnt detect anything neither ad-aware 2007.
View 14 Replies
View Related
Mar 8, 2008
So, my computer was once owned by a corporation, and there are various policies in place that lead to error messages and a lack of access (even though I am an administrator).
1) I can't access the Firewall or Windows Update features
2) Sometimes when I'm trying to install software, I get a message that says "This operation was cancelled due to restrictions in place on your computer. Please contact a network administrator" or something like that.
I have access to regedit (after a bit of work) and have been able to win back some of my privileges. However, I can't seem to find the right restrictions to apply to the above issues. editing policies in gpedit does not do anything! None of the policies take effect. Does anyone know how to remedy this?
View 6 Replies
View Related
Aug 7, 2005
I have trouble getting my e-mail from work.When I try, I get this message.What does it mean in layman's language, and how can I fix it?
View 12 Replies
View Related
Jan 20, 2008
I am trying to install the newest software for my Zune. I download the install file to my pc and when I run the program, I get the following error: ERROR. An error occurred during setup. Operation'CInstallOperation::StartOperation' has returned error '0x80040154'.Class not registered.Error Code: 0x80040154. I have a Windows XP Home Edition SP2. I have tried to install all the updates necessary but I still can't figured out why I get the error.
View 12 Replies
View Related
Jan 3, 2005
Computer: 2004 Presario, 2.6 Gig Processor, 512 MB RAM, 120 Gig HD, under warranty.Operating System: XP SP1.Comments: Runs like a 286; very slow moving from program to program; slow when shutting down. Complete disk wipe system recovery has been done; non-disk wipe system recovery has been done; Ad-Awre SE installed, Current Noron anti-virus installed and updated. Sytem set for "fastest operation".
View 14 Replies
View Related
Aug 1, 2005
I am having problem when trying to install Microsoft SQL Server 2000 Personal Edition. When I start the installation I get the message below: "A previous installation created pending file operation on the installation machine. You must restart the computer before running setup" Even if I restart the machine the message keep coming up, and I am not able to install the SQL server.
View 2 Replies
View Related
Aug 18, 2005
PC MightyMax after I was having problems with my cmd not starting up. My cmd would say some 16 bit message The NTVDM CPU has encountered an illegal operation or for that matter try and run anything dos related and I really don't know how that started. I downloaded PC MightyMax to try and fix some of those problems. After installing I ran the test it said and it said I had a good bit of problems wrong and it said I had to pay to fix them so I just said forget it. I restarted my computer and when it got back to the windows part a message comes up in a bunch of symbols I deffinately cannot read. To be blunt just about everything is in those symbol things. It has a button to click even though I can't read it. I click it and it does nothing. I can't get to my desktop or anything. I tried starting in safemode and got to my desktop after hitting the button on the message and all my desktop items and everything else is in those weird symbol things
View 14 Replies
View Related
Dec 27, 2004
The integrated keyboard (PS/2) on my Inspiron 2650 notebook stopped working in the middle of normal operation. The power and standby keys work, along with the mouse, but no standard keys respond, even on powerup. XP says its working fine.
View 2 Replies
View Related
