my printer seems to have disconnected itself from the computer. Upto now, everything was fine, but when I went to print something, nothing would happen when I clicked the 'print' button.However, after I tried printing from notepad, it still comes up with 'Operation could not be completed.I reinstalled all my printer programs, (I HAVE A CANON MP130) but still no results.
View 10 Replies
I am running WIN-xp-he-sp2 os. When I try to search for a file, I get the following Error Messagr:"Unexpected Error. Action could not be completed". What is my problem and how do I correct it?
View 6 Replies View RelatedI am well above the 15% required by windows but for some reason it won't defrag properly with the default defrag on windows. I also tried another program that did the same.
The log gives the following errors. I also had used ccleaner and all kinds of reg cleaners prior to use
I just completed a clean reinstall of xp. After installing Photoshop CS3 & iTunes my computer has been running severely slow! I know it's the "Bonjour Service" that is auto installed when installing both programs. I have stopped the program through "services" and have been instructed to remove a file via cmd prompt but when I try to do this I get a message stating C:program is not recognized as an internal or external command, operable program or batch file.
View 2 Replies View RelatedI'm trying to install Windows XP on a machine that was just put together. I started installing XP 4 or 5 hours ago. It's saying 37 minutes remaining right now. almost three hours ago it was at 39 minutes remaining. This isn't my first attempt installing xp on this machine. I've swapped out the HD, the CD drive, tested the memory and checked the jumpers. Everything appears to be okay in the bios (although i'm not an expert). Nothing seems to work. I'm sure it's not the CD, i used it earlier today on my machine with no problems. Any ideas what the problem could be?
View 1 Replies View RelatedI had to hit the ole restore button and my computer bought me back to the beginning ( XPsp1). When I try to install SP2 I keep getting :" Unable to read or write to database" And then it said:" Service pack 2 did not complete" I also check the Microsoft website and i said I was getting a error code: 0x800710D9
View 4 Replies View RelatedI tried running system restore and after the computer restarted, I got a message saying the restoration could not be completed. There was no explanation why. In case it matters, I have about 2 GB harddrive space left.Also, system restore has worked in the past.
View 3 Replies View RelatedMy OS is XP Pro. For quite a while now, whenever my system tries to install the latest version of Win Media Player, most of the installation happens and then I get an error message saying the installation wasn't completed and that I must log on as administrator. Since I am the adminstrator, I guess I've somewhere along the line lost my administrator rights.
View 4 Replies View RelatedIn the printer and faxes window there are printer icons listed in addition to my default HP Printer. Whiy are they listed there and what do they do since you can't use them...or can you and if so, how? Two that are listed on my computer are:
Broderbund PDF Creator
Quicken PDF Printer
I bought a new HP printer today. I had a hotfix installed at some point that shutdown and woke up my printer at shutdown and startup. The new printer isn't affected by this hotfix. Does anyone know where I can get this patch?
View 2 Replies View RelatedTwo custom PCs with XP Pro at same SP level. PC1 sees printer through switch. PC2 can not see printer. PC2 connects and sees printer when I cable the USB DIRECTLY to the printer instead of going thru a switch. Therefore, I know PC2 can print. Have tried 2 different switches. An A/B data switch and Belkin's 4x1 USB Peripheral Switch F1U401. PC1 works with both switches but PC2 does not.
View 9 Replies View RelatedWe've had to change our address space and therefore the printer address has changed. I've changed the address on all but one computer. On this particular computer when I try to edit the TCP/IP port I get the message:
"An error occurred during port configuration. Access is denied."
If I try to create a new port I can select that I want it to be a Standard TCP/IP Port and then it tells me:
"Specified port cannot be added. Access is denied."
I have connected 3 new PC's on a P2P network, and connected a HP 4610 Color Laser Printer via a JetDirect 175 print server. On one PC, I can only print from the Administrator account. The other 2 computers work fine. On the one that is having issues, when printing a test page I receive a "Failed to Print" error mesage, and looking in the printer jobs menu, it shows that there was an error printing. The
Administrator account can print fine from this machine.
The user accounts are "restricted user" accounts on all 3 computers.
All 3 computers are exactly the same type, and all have the latest
updates.
After a system crash all printers are gone and when trying to add a printer I get the message:
"Operation could not be completed. The print spooler service is not running" After starting the service manually and trying to add a printer I get the message:"Operation could not be completed" and the service is stopped again.I looked at some of the previous answers and related topics (like article nine, and Q324757
My pc hangs up in almost all operation.mostly when i restart my computer its happens.any virus attacked is this.
View 1 Replies View RelatedI am having a problem with XP Pro Freezing during operation. The problem began after installing a Dail-up modem ("DYNEX" MOD# DX-M100) and loading the drivers for said Modem and a windows hardware update for the modem (that failed to install). First I had Blue Screenc ( c0000005 ) and stop errors ( 0X 000000D1 ). I then removed hardware and restored to previous state but continued blue screens. after some checking disabled "Norton antivirus" auto protect and have had no more Blue Screens. However the problem with freezing remains.
View 14 Replies View RelatedI created another user on my XP home edition machine to isolate "business"
Logged on as my alter ego, I needed to open a Visio file. It asked for the master disk, and I proceeded to install (even though Viso is already installed for me to use as the prime user). I got a message that the Administrator had blocked this kind of activity.
How did I block it? And more important, how do I unblock it?
I have Windows XP Home Edition on HP Pavilion dv1000 series laptop. I installed AutoCAD2008 from their web site a few months ago. I found that it immediately slowed down my computer, even though I more than met their minimal installation requirements. After a week, I purchased a new computer to run ACAD, and uninstalled the program (except for the free DWF viewer) from my laptop. My laptop remained really slow. I tried to do the system Restore, but my computer was unable to go back to the date selected. I believe I defragged etc. after the uninstall, but am not 100% sure I did.
When I start the laptop first thing, the time showing doesn't change, even though minutes are passing. It takes about ten minutes from turning on the PC to getting Internet Explorer to open up. Or even to run Solitaire or open Notepad. I wonder if my ZoneLabs Security System is causing some of this slowness. Lately, I've been having to turn off the power to my laptop manually to get it to shut down.I regularly edit and keep my start up programs to a minimum, but include the programs Mozy (backup) and ZoneAlarm Security. I ran HijackThis and the log file is below. I've been puzzled why ZoneLabs has two scanning processes running at the same time.
I had a slow computer operation problem previously, and using the support here was able to fix it. I'm having the excrutiatingly slow operation again, where I click something like Solitaire, and it takes 2 to 4 minutes to run it the first time.
View 14 Replies View RelatedI started having these problems a few days ago. The main one is that when I try to go to Tools/Internet Options in Internet Explorer,I get the message "This operation has been cancelled due to restrictions in effect on this computer." I get a similar message when I try to save changes when exiting msconfig. Needless to say, I am the administrator and the only one who uses the computer, so it's not a restriction/permission issue. My problem is that my registry path doesn't match up to what is shown above. After I get to Policies/Microsoft there is no Internet Explorer folder in either of those two paths. If I start from CURRENT USER, the only folder under Policies/Microsoft is System Certificates, and if I start from LOCAL MACHINE, the only folders are Conferencing, System Certificates, Windows, and Windows NT. I tried searching the whole registry for "restrictions" and found nothing. So what do I do now?
View 11 Replies View RelatedAt present, I have a screen that keeps saying 'error loading operating system'. To start I had Wn98se, installed WnXP Pro. The files and settings transer wizard did it's thing copying but didn't work upon install. I have 98 start up disk .. but nothing for the XP. (Was having trouble with update downloads / installs from micro.) but over all the system was working fine. I have Norton 05 Premier / goback if I can get to it. I just installed a new hard drive, 'Steup' had identified hd but I never got windows to open. Can't say that I know what happened,, seems to me that it asked about partitions. I do not understand much about that, never have changed or used. My guess, they work like seperators on task bar?? Next I think it wanted to install OS, I figured okay, but why?, it should already have XP on it (old drive) I left old as primary. Then it got to where it was saying it would 'format'. Wait a minute, I know enough to know I'd lose everything, so I rebooted. I've tried a number of time to see if I missed something. I finely decided to open the pc, disconnect the new drive and get back on track. I've tried the 'F8', pays no attention to that. I thought if I could get in to safe mode, I could use my 'GoBack' - which would clear out mistakes or whatever is causing trouble.
I can get a screen that asks if I want to boot from ST32 (my old), from CD-Rom, floppy and SCSI (whatever that is?). I've tried the hd, still get the error. I dont have any start up devices (was waiting to make -trble with the updates yet). So I put my WnXP disk in and same error,, but if I fool around with it (time it just right) I can get it to where it wants to install. "Welcome to setup" it can set up xp. Gives me a partition that looks like what I'd expect my hd to look like, scary part is the free space is the same amount. Have option of 8MB space, that won't work,, tried it . So I'm brave and hit in stall on what I think is my old hard drive. I then get told it has to "format",that's such a nasty word. I have not gone any further. I have a choice of NTFS / 32,, old was 32. Before I go further is there a floppy / disc / download / a tool, that I could purchase to get into safe mode? I thought I'd give my old 98 Norton Rescue floppy a try - nope, but I got what loked like dos prompt. I just didn't know how to move from the A:> to a command that would get me into safe mode. Or better yet, my WNXP I had running. I read here that there wasn't any problem with using NTFS and 32 on same pc. I'm wondering if I have to should I pull the old hd connection (just to be sure), install the new hd get it up and running and then later come back to transferring what I want. OR because my old was 32, stick with 32, and not set myself up for more problems?? I have a full back up on CD of my old HD, would there be anything there I could use to get back into safe. Sorry I'm not better at this,, if I were I'd probably not be in this mess. Could it be I have a bad XP? They been trying to clear up the 'update' thing but nothing has worked.
My existing C: drive. First I was getting the "Error 983" error. Then I un-installed SP2 which was causing a gang of problems, freezing programs for a couple mins mostly. After I got it uninstalled I did a disk defrag, then a chkdsk /f. Now I have partitioned the drive using PM8 again and this time after the reboot it is telling me it is completed but once Windows XP reboots there is no new partition.
Im trying to install Suse Linux 9.0. But I really want to have 2 new partitions, one for Suse, and the other as a back up.
Within a thread on this page titled ''Windows XP Slow Shutdown'', member ''caktus'' answered the original post thusly:
I beleive applies if the fragmentation may drastically affect the operation of Windows. Regular or even daily defragmenting will [help] keep the machine operating at peak performance. It also means defregmentation time may be reduced form many minutes to as little as seconds.
This has been a question I've never really looked into, but has been on my mind for quite some time, since I had remembered reading that one shouldn't defrag on a continual basis. I just looked under the ''help'' section within ''Defragmentation'' in XP which states:
I recently returned my notebook to the manufacturer due to a failed DVD-drive.They replaced the DVD-drive and the main board, but now the computer is very slow. It takes over 5 minutes to boot-up and the most basic operations take an age.Is there a solution that doesn't involve a full system recovery, as their helpdesk is recommending?
View 2 Replies View RelatedThe option "Automated System Recovery Wizard" shows (at the end before the real start of the backup) the message "The files for the recovery diskette could not be created. The operation was aborted."
View 1 Replies View RelatedI keep recieving the message: Unexpected Error Due to an Overflow or Underflow of the Arithmetic Operation. What do you do to repair that?
View 6 Replies View Relatedmy problem is that when I try to run the ''Regedit" or active any register key, I get this message "this operation has been cancelled due to restrictions in effect on this computer please contact your system administrator" and when I login as administrator I get the same message.
View 4 Replies View Relatedi have been trying to do a system restore for the last week but every time i try i get an error after it's rebooted to say system restore was unable to restore my system as operation is incomplete.i have tried many different restore points but i always get the same error msg
View 6 Replies View RelatedResolved a SpySheriff problem yesterday through Security forum and now having a Mozilla problem, Techguy suggested a post here to try and resolve it.On XP SP2. Upgraded to newest Mozilla 2 days ago. Since then keep getting 'Illegal Operation in Plug-in Shockwave Flash' This pops up repeatedly and after few times being closed it shuts down Mozilla.
View 9 Replies View RelatedError message "Operation has been cancelled due to restrictions in effect on this computer. Contact system administrator." I want to clear my cache. What do I do?
View 1 Replies View RelatedI tried to access Microsoft Press Interactive Training and receive a message that a file that is required for normal operation is missing. That I should reinstall it from my cd . Im the only user on this computer and havent deleted anything related to this file. I only delete cookies and temporary files.
View 4 Replies View Related
