The option "Automated System Recovery Wizard" shows (at the end before the real start of the backup) the message "The files for the recovery diskette could not be created. The operation was aborted."
View 1 RepliesI'm looking to upgrade to service pack III,but before I do I want to back up my files, settings and email info. Tried backing up to an extra drive I have using Windows Back up utility. It starts backing up okay, then shuts down as an error message pops up saying there is a 4 Gb limit. Normally, I backed up to DVD's using MS One Step or whatever they called it. Unfortunately, I uninstalled this Utility and I am trying to back up using the systems Windows XP utility. For some reason, XP won't let me back up to DVD's.
View 13 Replies View RelatedBackup my computer so I can do a reformat of my computer?
View 11 Replies View RelatedI have a new Toshiba laptop with win. xp profesional and I want to make a backup of all my hard drive on the DVD.I chose the backup option from win xp but after the 1st DVD is full doesn't advice me to insert the next DVD, it stops with the message:disc full.
View 2 Replies View RelatedAfter restoring a computer and backing up files, once the computer is back up and running should I have a foldercalled "My Backup 1408-08 2353" or should I have a single backup file called backup.bkf? I'm trying to help someone, and they have a folder with the files already available instead of a single backup.bkf file. He wants to restore everything to the original location before the computer restore. How can he do that with the folder he has instead of a backup.bkf file? The restore wizard is asking for a .bkf file to place everything in the original locations, and he doesn't have that.
View 11 Replies View RelatedI want to backup my PC for disaster recovery and then do an incremental backup each night to a USB hard drive. I tried Retrospect which came with the USB hard drive. I couldn't get it to work to well. I've been using the MS backup utility. With this software it seems any new email causes changes my large Outlook PST file and the whole
file is backed up again. I've been trying to find backup software which will backup just the changed elements of the pst file and have tried downloading a trial version of
continuity@work from Mobiliti who claim to be able to just backup the changes to a PST file. I left continuity@work running overnight and had to stop it as it was only 50% through the backup this morning. It calls it synchronization rather than backup and from the error messages it seems that it doesn't create a shadow image before backing up as several files were not backed up as they were in use.
I have two IDE hard disks one 40GB=C and the secondary 200GB=D,I have made a copy of documents and setting from C to a new folder backup in drive D.After that this operating finished I preformed format of C and installed from on drive C the MS WIN XP operating system.After the installation the backup FOLDER on drive D, changed to backup FILE without extension.How can I restore my DATA? anyone familiar with this phenomenon
View 3 Replies View Relatedbasically what im looking to do is delete some old entries that the XP backup utility has created over time that i setup a while ago. Im using the "copy" option.so nothing has been appended or incremental.Im just looking to avoid deleting the setup i got, and maybe just delete a few "copy" backups so that theres not 8 gigs / 1 years worth of backups.i only need about 4 months I forgot about it.cuz i never neaded it. But it looks as if its the only way b/c i cant just delete selected backups.all or nothing?/ anyone know of a better backup utility that is simple and easy on a system BTW?
View 11 Replies View RelatedWhen scheduling a backup using the Windows Backup Wizard, I put in all the scheduling info, but Windows backup never launches. When I look at a scheduled event and click "properties" I get an error message that says "General page initialization failed, etc, etc. (error# 0X80090016)
View 2 Replies View RelatedMy pc hangs up in almost all operation.mostly when i restart my computer its happens.any virus attacked is this.
View 1 Replies View RelatedI am having a problem with XP Pro Freezing during operation. The problem began after installing a Dail-up modem ("DYNEX" MOD# DX-M100) and loading the drivers for said Modem and a windows hardware update for the modem (that failed to install). First I had Blue Screenc ( c0000005 ) and stop errors ( 0X 000000D1 ). I then removed hardware and restored to previous state but continued blue screens. after some checking disabled "Norton antivirus" auto protect and have had no more Blue Screens. However the problem with freezing remains.
View 14 Replies View RelatedI created another user on my XP home edition machine to isolate "business"
Logged on as my alter ego, I needed to open a Visio file. It asked for the master disk, and I proceeded to install (even though Viso is already installed for me to use as the prime user). I got a message that the Administrator had blocked this kind of activity.
How did I block it? And more important, how do I unblock it?
I have Windows XP Home Edition on HP Pavilion dv1000 series laptop. I installed AutoCAD2008 from their web site a few months ago. I found that it immediately slowed down my computer, even though I more than met their minimal installation requirements. After a week, I purchased a new computer to run ACAD, and uninstalled the program (except for the free DWF viewer) from my laptop. My laptop remained really slow. I tried to do the system Restore, but my computer was unable to go back to the date selected. I believe I defragged etc. after the uninstall, but am not 100% sure I did.
When I start the laptop first thing, the time showing doesn't change, even though minutes are passing. It takes about ten minutes from turning on the PC to getting Internet Explorer to open up. Or even to run Solitaire or open Notepad. I wonder if my ZoneLabs Security System is causing some of this slowness. Lately, I've been having to turn off the power to my laptop manually to get it to shut down.I regularly edit and keep my start up programs to a minimum, but include the programs Mozy (backup) and ZoneAlarm Security. I ran HijackThis and the log file is below. I've been puzzled why ZoneLabs has two scanning processes running at the same time.
I had a slow computer operation problem previously, and using the support here was able to fix it. I'm having the excrutiatingly slow operation again, where I click something like Solitaire, and it takes 2 to 4 minutes to run it the first time.
View 14 Replies View RelatedI started having these problems a few days ago. The main one is that when I try to go to Tools/Internet Options in Internet Explorer,I get the message "This operation has been cancelled due to restrictions in effect on this computer." I get a similar message when I try to save changes when exiting msconfig. Needless to say, I am the administrator and the only one who uses the computer, so it's not a restriction/permission issue. My problem is that my registry path doesn't match up to what is shown above. After I get to Policies/Microsoft there is no Internet Explorer folder in either of those two paths. If I start from CURRENT USER, the only folder under Policies/Microsoft is System Certificates, and if I start from LOCAL MACHINE, the only folders are Conferencing, System Certificates, Windows, and Windows NT. I tried searching the whole registry for "restrictions" and found nothing. So what do I do now?
View 11 Replies View RelatedAt present, I have a screen that keeps saying 'error loading operating system'. To start I had Wn98se, installed WnXP Pro. The files and settings transer wizard did it's thing copying but didn't work upon install. I have 98 start up disk .. but nothing for the XP. (Was having trouble with update downloads / installs from micro.) but over all the system was working fine. I have Norton 05 Premier / goback if I can get to it. I just installed a new hard drive, 'Steup' had identified hd but I never got windows to open. Can't say that I know what happened,, seems to me that it asked about partitions. I do not understand much about that, never have changed or used. My guess, they work like seperators on task bar?? Next I think it wanted to install OS, I figured okay, but why?, it should already have XP on it (old drive) I left old as primary. Then it got to where it was saying it would 'format'. Wait a minute, I know enough to know I'd lose everything, so I rebooted. I've tried a number of time to see if I missed something. I finely decided to open the pc, disconnect the new drive and get back on track. I've tried the 'F8', pays no attention to that. I thought if I could get in to safe mode, I could use my 'GoBack' - which would clear out mistakes or whatever is causing trouble.
I can get a screen that asks if I want to boot from ST32 (my old), from CD-Rom, floppy and SCSI (whatever that is?). I've tried the hd, still get the error. I dont have any start up devices (was waiting to make -trble with the updates yet). So I put my WnXP disk in and same error,, but if I fool around with it (time it just right) I can get it to where it wants to install. "Welcome to setup" it can set up xp. Gives me a partition that looks like what I'd expect my hd to look like, scary part is the free space is the same amount. Have option of 8MB space, that won't work,, tried it . So I'm brave and hit in stall on what I think is my old hard drive. I then get told it has to "format",that's such a nasty word. I have not gone any further. I have a choice of NTFS / 32,, old was 32. Before I go further is there a floppy / disc / download / a tool, that I could purchase to get into safe mode? I thought I'd give my old 98 Norton Rescue floppy a try - nope, but I got what loked like dos prompt. I just didn't know how to move from the A:> to a command that would get me into safe mode. Or better yet, my WNXP I had running. I read here that there wasn't any problem with using NTFS and 32 on same pc. I'm wondering if I have to should I pull the old hd connection (just to be sure), install the new hd get it up and running and then later come back to transferring what I want. OR because my old was 32, stick with 32, and not set myself up for more problems?? I have a full back up on CD of my old HD, would there be anything there I could use to get back into safe. Sorry I'm not better at this,, if I were I'd probably not be in this mess. Could it be I have a bad XP? They been trying to clear up the 'update' thing but nothing has worked.
my printer seems to have disconnected itself from the computer. Upto now, everything was fine, but when I went to print something, nothing would happen when I clicked the 'print' button.However, after I tried printing from notepad, it still comes up with 'Operation could not be completed.I reinstalled all my printer programs, (I HAVE A CANON MP130) but still no results.
View 10 Replies View RelatedWithin a thread on this page titled ''Windows XP Slow Shutdown'', member ''caktus'' answered the original post thusly:
I beleive applies if the fragmentation may drastically affect the operation of Windows. Regular or even daily defragmenting will [help] keep the machine operating at peak performance. It also means defregmentation time may be reduced form many minutes to as little as seconds.
This has been a question I've never really looked into, but has been on my mind for quite some time, since I had remembered reading that one shouldn't defrag on a continual basis. I just looked under the ''help'' section within ''Defragmentation'' in XP which states:
I recently returned my notebook to the manufacturer due to a failed DVD-drive.They replaced the DVD-drive and the main board, but now the computer is very slow. It takes over 5 minutes to boot-up and the most basic operations take an age.Is there a solution that doesn't involve a full system recovery, as their helpdesk is recommending?
View 2 Replies View RelatedI keep recieving the message: Unexpected Error Due to an Overflow or Underflow of the Arithmetic Operation. What do you do to repair that?
View 6 Replies View Relatedmy problem is that when I try to run the ''Regedit" or active any register key, I get this message "this operation has been cancelled due to restrictions in effect on this computer please contact your system administrator" and when I login as administrator I get the same message.
View 4 Replies View Relatedi have been trying to do a system restore for the last week but every time i try i get an error after it's rebooted to say system restore was unable to restore my system as operation is incomplete.i have tried many different restore points but i always get the same error msg
View 6 Replies View RelatedResolved a SpySheriff problem yesterday through Security forum and now having a Mozilla problem, Techguy suggested a post here to try and resolve it.On XP SP2. Upgraded to newest Mozilla 2 days ago. Since then keep getting 'Illegal Operation in Plug-in Shockwave Flash' This pops up repeatedly and after few times being closed it shuts down Mozilla.
View 9 Replies View RelatedError message "Operation has been cancelled due to restrictions in effect on this computer. Contact system administrator." I want to clear my cache. What do I do?
View 1 Replies View RelatedI tried to access Microsoft Press Interactive Training and receive a message that a file that is required for normal operation is missing. That I should reinstall it from my cd . Im the only user on this computer and havent deleted anything related to this file. I only delete cookies and temporary files.
View 4 Replies View RelatedI'm trying to open web links and file links in any of the Office 2003 products, for example Outlook. I click the link to open it, and an error message appears: This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.
View 1 Replies View RelatedEvery 2 minutes i have the message on my laptop windows security potential spyware operation . your computer is making unauthorized copies of your system and internet files . run full scan now to pervent any unathorised access to your files click here to download spyware remover. Avast doesnt detect anything neither ad-aware 2007.
View 14 Replies View RelatedSo, my computer was once owned by a corporation, and there are various policies in place that lead to error messages and a lack of access (even though I am an administrator).
1) I can't access the Firewall or Windows Update features
2) Sometimes when I'm trying to install software, I get a message that says "This operation was cancelled due to restrictions in place on your computer. Please contact a network administrator" or something like that.
I have access to regedit (after a bit of work) and have been able to win back some of my privileges. However, I can't seem to find the right restrictions to apply to the above issues. editing policies in gpedit does not do anything! None of the policies take effect. Does anyone know how to remedy this?
I have trouble getting my e-mail from work.When I try, I get this message.What does it mean in layman's language, and how can I fix it?
View 12 Replies View RelatedI am trying to install the newest software for my Zune. I download the install file to my pc and when I run the program, I get the following error: ERROR. An error occurred during setup. Operation'CInstallOperation::StartOperation' has returned error '0x80040154'.Class not registered.Error Code: 0x80040154. I have a Windows XP Home Edition SP2. I have tried to install all the updates necessary but I still can't figured out why I get the error.
View 12 Replies View RelatedComputer: 2004 Presario, 2.6 Gig Processor, 512 MB RAM, 120 Gig HD, under warranty.Operating System: XP SP1.Comments: Runs like a 286; very slow moving from program to program; slow when shutting down. Complete disk wipe system recovery has been done; non-disk wipe system recovery has been done; Ad-Awre SE installed, Current Noron anti-virus installed and updated. Sytem set for "fastest operation".
View 14 Replies View Related