I am working with a Dell 2400 running Windows XP Service Pack 3 with a Pentium 4 2.8 GHz processor and 1.2 gig of ram. It still seems particularly slow. I am not sure if it some of the applications that I am running like Norton 360 or some of my settings.
View 6 RepliesPc taking for ever to load, mouse slow too...
View 6 Replies View RelatedIt takes up to 15 minutes to start up when you first turn it on. Often takes up to 20 seconds for programs to come up when you hit start. Virtually all software programs take time to come up, even little ones like Notepad. Have lots of slowdowns and freeze ups when using the internet, including trying to type in url's. Anytime the computer isn't in use for a little while, starting up again is always very slow with frequent little freeze ups. Lately, even when we first turn the computer on, we get a low on virtual memory warning in the lower right corner. Somebody told me this could be the problem. If so, why would it need more memory now than in the past when it worked ok?We actually deleted lots of files and some software programs not be used, including video games.We used Spybot, Malwarebytes and our anti virus program a few days back and all 3 came up with no problems.
View 14 Replies View RelatedMy computer starts going really slow after about 11:00-12:00 PM-AM (Programs take forever to start/open and games take about 20 minutes to load.) until i wake up (About 10-11:45 AM ). Anywho I was wondering if there is any thing I can do to help my computer run fast for 24/7, give or take.Just to let you know I'm Not that good with technical stuff, so if there's any that would be difficult for a noob you'll have to explain slowly.
View 8 Replies View RelatedA few weeks ago I decided to try messing around with the RAM. I took out the last stick and the computer, yet again, seemed to work perfectly… for a week at least (enough time for me to assume it was fixed). The problems persisted. Note that by now not only did I have bsod problems but simple problems like browsers not being able to open, programs crashing at a very high rate,windows unable to shut down, etc. (these reasons made me decide to start experimenting with the RAM) After RAM stick #4 did not work, I started switching out ram (to no avail) And just yesterday I took them all out and put only two in, so I am running 2 gigs memory
Last night, my computer seemed to run fine, I got my hopes up yet again. This morning my comp bsod’d. After waiting an hour, I turned my computer back on and now I have a constant “Microsoft windows, the system has recovered from a serious error” error report sending thing, which no matter how many times I click don’t send or send it will pop up again. I have moved it to the corner of my screen to write this. I believe I may have had this problem before and just restarted to fix it, but I am not sure.
I've got an old msi K7N2G-L board/computer and it's got an old WD1200JB installed and running xp. The problem is that it boots and runs slow as molasses, I'm talking like 10 mins to get it to the log in screen and opening apps takes a good 2-3mins before opening too. If I run a defrag on the drive, things temp speed back up to normal, but as soon as I reboot, it's slow again. If I run the defrag again, everything's cool and speeds go back to normal.So I'm guessing that there's some HD corruption on this drive (at least 5yrs old) and it keeps writing system files to the bad sections of this old HD when it's booting. I've run various fdisks, but none of them reveal any errors. (I should mention that I'm diligently proactive on Antivirus', firewall and Spyware practices, so that's definitely not an option relating to the old drive's slowness.) I've scanned with Avira, Nod32, Kaspersky, Trojansuperantispyware, and checked hijack this entries, there's nothing detected or unusual. Of course, I don't have all of these installed at once.I decided to try and swap the drive out and reinstall xp on this system using a newer WD3200 drive (that I use as a storage drive on one of my other computers.) I run the xp installer, successfully quick format the 3200 partition to NTFS, and everything proceeds fine and fast(keep in mind the 3200 drive was used to store data on my newer comp and was already formatted to ntfs.) Unfortunately, after it successfully finishes the initial install, it gives me the 15 second reboot warning. Okay, I let it reboot, but instead of continuing the install after the reboot, the system hangs on "Verifying DMI Pool Data" and that's it. Nothing happens and I am unable to finish the installation. I tried this like 10 times with 2 different XP home's and I keep getting the same problem. When I go into Bios, the drive is recognized as a 3200/automatic settings? I can't see why xp installs fine on the old WD1200, but not on the WD3200.
1st I use internet explorer for my web browser. At work when I click on it it pops right up with out even thinking about it Page loads with in 10 seconds every time. At home. Some times it will take 30 seconds to a minute to start after I click on it.2nd issue is this Occasionally I will come into my computer after not using it for 8-10 hours or so and I will have a ton (sometimes 40+) Error messages that say "unable to launch restart.exe".I can close all of them but then the computer runs like a tank. I always have to do a hard shut down after this too.It will NOT restart using the proper methods just hangs up.
View 3 Replies View Relatedcomputer is running at 100% CPU so, you guessed it, very slow. In the processes it shows the spooler.exe using the power alternating with the System(at bottom of list) - but mostly the spooler.exe. The problem really started when he changed an ink cartridge.Does any of this make sense?
View 7 Replies View RelatedMy computer has been running slower than usual lately.
View 5 Replies View RelatedWhen moving around on computer, not on net, the computer in general, everything has slowed down...making attachments, typing in Word, viewing programs list etc.I have done a clean up and defrag, have Norton, did all windows updates yesterday, what else should I do? Still have the problem.Could this be security related and maybe a bug, would that slow down whole computer not just internet? Should I run all scans and post a Log on security or here?
View 14 Replies View RelatedUnusually slow system; unsure where to go from here.machine runs very slowly for the processor and for the amount of processes running.There is some degree of visual skipping/slowness,it is particularly apparent with audio and visual media. Even the startup sound is very drawn out and is characterized by a long, skipping echo. Music skips randomly and even alert noises, (such as the one heard when ending a process) has the same skipping/echo. This happens even when there are few apparent processes running and very little CPU usage (such as 5%), as well as when the system is overloaded (which happens remarkably quickly for the 20-30 processes running).
View 14 Replies View RelatedI have run norton antivirus. I have gone to msconfig and deslected all of the startup programs. I am using windows xp proffessional on one computer and xp home on another. What is slowing these computers down, and how do I fix them?
View 1 Replies View RelatedSpecs for the laptop. Intel T2050 @ 1.60ghz 1 gig of ram This is a brand new computer right out of the box. After Xp loaded up I Installed Norton then spybot AD then some games after which I defrag and it took 8 hrs to defrag on a 100 gig HDD. The computer runs very slow and have no clue way.
View 4 Replies View RelatedMy friend has an older pc (p2) and it seems to be pretty SLOW.I've run adaware and Norton. Still seems slow.
View 14 Replies View Relatedsince i updated to norton 2007 my system has slowed down dramatically. i have run spywares and scanned for viruses but nothing seems to come up
View 3 Replies View RelatedLately my computer has been extremely slow, not just internet slow but onboard slow. For example, if I click on an application from the desktop it will sit there for 10-20 seconds before anything happens. Occasionally I'll click multiple times on something and nothing will happen then 30 seconds later it will open multiple instances of things. This delay has been happening with just about anything I click on, acting like the computer's busy doing something else when nothing else should be going on. I've looked in the task manager and the applications column will be blank
View 14 Replies View RelatedI just bought this new computer for a few months ago. And for some reason it stopped a few days ago and i tried reformating alot of times, most of the time it would stop or just get error's while installing but i finally installed it. And it runs like a snail.The computer basically doesnt run like how it should be running.I have Pentium 4. 3 Ghz - 1GB Ram - 256 MB Graphics Card.
View 14 Replies View RelatedThe main issue is that as soon as I connect to the internet, it takes about 10 minutes for me to be able to do anything. Before the connection is established, the system is normal. After connecting, I can't open any programs, or even task manager or control panel. After about 10 minutes, everything opens and seems to run normal, but still a bit slow. If I disconnect and try to log off or shut down while waiting for IE to open, it freezes the computer and I have to manually shut down. I do go through the task manager and shut down everything that I can before signing on to the internet and it does not make any difference.
View 2 Replies View Relatedam using my laptop for 2 years now, there is a constant problem that happens so many times lately. the pc suddenly become very slow. it happens when it's freeze for 6-7 second (i think its hardisk) and the sound stuck for this period of time ,and then it becomes very slow when u try to do anything with inconstant sound(or slow). this freezing occur once in a while, some times after this, it's run regular without any problems and some times.it goes bad forever (blue screen,slow.)i can solve this problem by restoring my system in less than 30 minutes (which i did alot) but am sick of it.. i want to know what i had to do to fix this problem and to change the hardware if necessary to prevent further problems.who know what it could be the problem or had similar issue , please response..the usage of cpu is 18% when am not doing nothing,it goes to max 50-55% when i open a new program, when am looking at CPU Usage History one of CPU's reach the top the other nearly nothing!
View 14 Replies View Relatedi have xp sp2 and i noticed within the last week if i have 2-3 programs open at a time the screen freezes for like 30 secs or so,but when i check its says the 3 programs use %32 of my cpu usage,does that really matter?Also xp keeps telling me bout virtual memory too low?how can i speed things up again?i defraged,registry fix,usual virus scans and nothings working
View 4 Replies View Relatedhow can I make my pc run better. For example~ upon weeks/a month upon a new reformat my pc runs great, programs, games, etc... but after a while it just runs slow. especially when my son tries to play a game. the game skips alot, the video plays in slow motion, etc. When I know that any other time it works fine. even when I open a folder or IE it hangs for 10-30 secs...
View 9 Replies View RelatedWHen i move a windows go so slow! Or when i scroll down in internet explorer 6 goes SLOW, i just formated the pc...
View 6 Replies View RelatedMy old pc is for some reason like SUPER!! Slow!!!so .. is there any settings to make pc faster?
View 11 Replies View RelatedI have a Toshiba Satellite (it's about 2yrs old). Yesterday I did a interlnet explorer update and when my system did a restart to install the screen went black. I powered off then on and it would goto the xp loading page then go black again. Tried to restart several times sometime I could get to the login page and once I logged in my desktop would appear but I could not do anything. Tried f8 went to last known good configuration but still same issue. Tried safe mode but you can not do a restore in safe mode. Several times when i was able to get logged in a blue screen would flash but very fast and it would say something about an error and needing to restart.
View 24 Replies View RelatedI am having a problem where everything seems to take up way more CPU usage than it used to. There is no application stealing processing power. Rather, when I start an application that would normally use a bit of CPU, it now spikes the CPU.In particular, 5 year old game called Neverwinter Nights is now unplayable and spikes up to 55% CPU usage on both cores even though it should only hit one core. The Earthsim program also does the same. So do other applications.
View 11 Replies View RelatedMy XP Pro machine at work has recently started running extreamly slow on bootup. It runs fine up to the username and password window, but as soon as i sign in it then takes atleast 15 min before i can use it. I have a PF usage of 2.24 gig during this time and my HijackThis details are below:
View 12 Replies View RelatedI know you all seen this problem before but I've got to try. I have a Compaq, with a 60 gig hard drive, 384 of memory, 1195 Mhz processor and running windows XP. My computer runs like it was at the tops 300 Mhz. I've check for virus and spy ware, deleted unnecessary files, uninstall most of my games, defrag the c drive and defrag my registrey. I even changed my battery. And it still runs slow. Any suggestion on what I can do? I'm about reading to throw it. Also it is constantly freezing up on me. Man I thought XP wasn't to do that. It's worse the the millinum. my programs are constatly not responding.
View 3 Replies View RelatedI have been coding in dBase since 1982. Upgrading to Win95, 98 and ME was no problem. But now that I have upgraded to XP on a 3.2 ghz Intel machine with a gig of ram, I am having two serious performance problems. I am using dBase IV 2.0. Keyboard input is slow and sporadic to display. Printing is delayed by up to a minute, but will execute immediatley if I exit the program. I have tried changing every aspet of the short cuts properties, including compatibily option, and executing it from CMD.EXE instead of COMMAND.COM.
View 9 Replies View RelatedThis is a Windows XP sp3 domain connected PC with one specific user, which all of a sudden takes 2.5mins to log in to the domain, Where it used to take just about 20 seconds. Other users on the same PC is all OK 20sec login This is not the usual where it hangs at "applying computer settings" or "personal settings" it's after those two has passed that it just hangs for a couple of minutes.
All i get is the mouse pointer (not even hourglass) and the desktop wallpaper for about 2-3 minutes. When it finally logs in everything is as quick as you would expect that spec of PC to be (1,6ghz Sempron, 1gb RAM, 40gb IDE-100 HDD)
computer now takes half an hour to an hour to reboot. in doing so, it tells me that it does not do the startup and services. it is so slow it is unbelievable. sometimes even being so slow that the words we type take a few seconds to show up on the screen. after working for a time it will invariably hang. or it will shut itself down. in either case we have to reboot, it takes that half an hour to an hour again
View 6 Replies View RelatedMy pc was working just fine a few days ago then last night i go on it was just dragging.Everything was loading slow despite the fact i have even firefox was loading slow which it never does.Anyway i asked my sister who was the last one on if she clicked on anything but no surprise the reply was I didn't do anything so i guess it was a ghost .I ran NAV but nothing found then again NAV doesn't seem to find anything
View 6 Replies View Related