I just bought this new computer for a few months ago. And for some reason it stopped a few days ago and i tried reformating alot of times, most of the time it would stop or just get error's while installing but i finally installed it. And it runs like a snail.The computer basically doesnt run like how it should be running.I have Pentium 4. 3 Ghz - 1GB Ram - 256 MB Graphics Card.
View 14 RepliesPc taking for ever to load, mouse slow too...
View 6 Replies View RelatedI am working with a Dell 2400 running Windows XP Service Pack 3 with a Pentium 4 2.8 GHz processor and 1.2 gig of ram. It still seems particularly slow. I am not sure if it some of the applications that I am running like Norton 360 or some of my settings.
View 6 Replies View RelatedIt takes up to 15 minutes to start up when you first turn it on. Often takes up to 20 seconds for programs to come up when you hit start. Virtually all software programs take time to come up, even little ones like Notepad. Have lots of slowdowns and freeze ups when using the internet, including trying to type in url's. Anytime the computer isn't in use for a little while, starting up again is always very slow with frequent little freeze ups. Lately, even when we first turn the computer on, we get a low on virtual memory warning in the lower right corner. Somebody told me this could be the problem. If so, why would it need more memory now than in the past when it worked ok?We actually deleted lots of files and some software programs not be used, including video games.We used Spybot, Malwarebytes and our anti virus program a few days back and all 3 came up with no problems.
View 14 Replies View RelatedThe main issue is that as soon as I connect to the internet, it takes about 10 minutes for me to be able to do anything. Before the connection is established, the system is normal. After connecting, I can't open any programs, or even task manager or control panel. After about 10 minutes, everything opens and seems to run normal, but still a bit slow. If I disconnect and try to log off or shut down while waiting for IE to open, it freezes the computer and I have to manually shut down. I do go through the task manager and shut down everything that I can before signing on to the internet and it does not make any difference.
View 2 Replies View Relatedam using my laptop for 2 years now, there is a constant problem that happens so many times lately. the pc suddenly become very slow. it happens when it's freeze for 6-7 second (i think its hardisk) and the sound stuck for this period of time ,and then it becomes very slow when u try to do anything with inconstant sound(or slow). this freezing occur once in a while, some times after this, it's run regular without any problems and some times.it goes bad forever (blue screen,slow.)i can solve this problem by restoring my system in less than 30 minutes (which i did alot) but am sick of it.. i want to know what i had to do to fix this problem and to change the hardware if necessary to prevent further problems.who know what it could be the problem or had similar issue , please response..the usage of cpu is 18% when am not doing nothing,it goes to max 50-55% when i open a new program, when am looking at CPU Usage History one of CPU's reach the top the other nearly nothing!
View 14 Replies View RelatedMy computer starts going really slow after about 11:00-12:00 PM-AM (Programs take forever to start/open and games take about 20 minutes to load.) until i wake up (About 10-11:45 AM ). Anywho I was wondering if there is any thing I can do to help my computer run fast for 24/7, give or take.Just to let you know I'm Not that good with technical stuff, so if there's any that would be difficult for a noob you'll have to explain slowly.
View 8 Replies View RelatedA few weeks ago I decided to try messing around with the RAM. I took out the last stick and the computer, yet again, seemed to work perfectly… for a week at least (enough time for me to assume it was fixed). The problems persisted. Note that by now not only did I have bsod problems but simple problems like browsers not being able to open, programs crashing at a very high rate,windows unable to shut down, etc. (these reasons made me decide to start experimenting with the RAM) After RAM stick #4 did not work, I started switching out ram (to no avail) And just yesterday I took them all out and put only two in, so I am running 2 gigs memory
Last night, my computer seemed to run fine, I got my hopes up yet again. This morning my comp bsod’d. After waiting an hour, I turned my computer back on and now I have a constant “Microsoft windows, the system has recovered from a serious error” error report sending thing, which no matter how many times I click don’t send or send it will pop up again. I have moved it to the corner of my screen to write this. I believe I may have had this problem before and just restarted to fix it, but I am not sure.
i have xp sp2 and i noticed within the last week if i have 2-3 programs open at a time the screen freezes for like 30 secs or so,but when i check its says the 3 programs use %32 of my cpu usage,does that really matter?Also xp keeps telling me bout virtual memory too low?how can i speed things up again?i defraged,registry fix,usual virus scans and nothings working
View 4 Replies View RelatedI've got an old msi K7N2G-L board/computer and it's got an old WD1200JB installed and running xp. The problem is that it boots and runs slow as molasses, I'm talking like 10 mins to get it to the log in screen and opening apps takes a good 2-3mins before opening too. If I run a defrag on the drive, things temp speed back up to normal, but as soon as I reboot, it's slow again. If I run the defrag again, everything's cool and speeds go back to normal.So I'm guessing that there's some HD corruption on this drive (at least 5yrs old) and it keeps writing system files to the bad sections of this old HD when it's booting. I've run various fdisks, but none of them reveal any errors. (I should mention that I'm diligently proactive on Antivirus', firewall and Spyware practices, so that's definitely not an option relating to the old drive's slowness.) I've scanned with Avira, Nod32, Kaspersky, Trojansuperantispyware, and checked hijack this entries, there's nothing detected or unusual. Of course, I don't have all of these installed at once.I decided to try and swap the drive out and reinstall xp on this system using a newer WD3200 drive (that I use as a storage drive on one of my other computers.) I run the xp installer, successfully quick format the 3200 partition to NTFS, and everything proceeds fine and fast(keep in mind the 3200 drive was used to store data on my newer comp and was already formatted to ntfs.) Unfortunately, after it successfully finishes the initial install, it gives me the 15 second reboot warning. Okay, I let it reboot, but instead of continuing the install after the reboot, the system hangs on "Verifying DMI Pool Data" and that's it. Nothing happens and I am unable to finish the installation. I tried this like 10 times with 2 different XP home's and I keep getting the same problem. When I go into Bios, the drive is recognized as a 3200/automatic settings? I can't see why xp installs fine on the old WD1200, but not on the WD3200.
how can I make my pc run better. For example~ upon weeks/a month upon a new reformat my pc runs great, programs, games, etc... but after a while it just runs slow. especially when my son tries to play a game. the game skips alot, the video plays in slow motion, etc. When I know that any other time it works fine. even when I open a folder or IE it hangs for 10-30 secs...
View 9 Replies View RelatedI have a Toshiba Satellite (it's about 2yrs old). Yesterday I did a interlnet explorer update and when my system did a restart to install the screen went black. I powered off then on and it would goto the xp loading page then go black again. Tried to restart several times sometime I could get to the login page and once I logged in my desktop would appear but I could not do anything. Tried f8 went to last known good configuration but still same issue. Tried safe mode but you can not do a restore in safe mode. Several times when i was able to get logged in a blue screen would flash but very fast and it would say something about an error and needing to restart.
View 24 Replies View Related1st I use internet explorer for my web browser. At work when I click on it it pops right up with out even thinking about it Page loads with in 10 seconds every time. At home. Some times it will take 30 seconds to a minute to start after I click on it.2nd issue is this Occasionally I will come into my computer after not using it for 8-10 hours or so and I will have a ton (sometimes 40+) Error messages that say "unable to launch restart.exe".I can close all of them but then the computer runs like a tank. I always have to do a hard shut down after this too.It will NOT restart using the proper methods just hangs up.
View 3 Replies View Relatedcomputer is running at 100% CPU so, you guessed it, very slow. In the processes it shows the spooler.exe using the power alternating with the System(at bottom of list) - but mostly the spooler.exe. The problem really started when he changed an ink cartridge.Does any of this make sense?
View 7 Replies View RelatedMy XP Pro machine at work has recently started running extreamly slow on bootup. It runs fine up to the username and password window, but as soon as i sign in it then takes atleast 15 min before i can use it. I have a PF usage of 2.24 gig during this time and my HijackThis details are below:
View 12 Replies View RelatedI know you all seen this problem before but I've got to try. I have a Compaq, with a 60 gig hard drive, 384 of memory, 1195 Mhz processor and running windows XP. My computer runs like it was at the tops 300 Mhz. I've check for virus and spy ware, deleted unnecessary files, uninstall most of my games, defrag the c drive and defrag my registrey. I even changed my battery. And it still runs slow. Any suggestion on what I can do? I'm about reading to throw it. Also it is constantly freezing up on me. Man I thought XP wasn't to do that. It's worse the the millinum. my programs are constatly not responding.
View 3 Replies View RelatedI have been coding in dBase since 1982. Upgrading to Win95, 98 and ME was no problem. But now that I have upgraded to XP on a 3.2 ghz Intel machine with a gig of ram, I am having two serious performance problems. I am using dBase IV 2.0. Keyboard input is slow and sporadic to display. Printing is delayed by up to a minute, but will execute immediatley if I exit the program. I have tried changing every aspet of the short cuts properties, including compatibily option, and executing it from CMD.EXE instead of COMMAND.COM.
View 9 Replies View RelatedHi all
Like the title says, everytime i turn my machine on the windows page appears on start and the load bar just keeps going. I left this running for an hour and nothing happened.
I have read tons of stuff and tried loads of stuff and yes you guessed it nothing has sorted it out.
My computer knowledge isnt great so if this requires Bios work or Command prompts i will need some detailed help.
Cheers All
AndyP
Im reformatting my computer with the OS CD it came with: Windows xp. I think its service pack 2. While re-installing i get the error: Setup cannot copy file: cinemst2.sys .It gives me the options to retry, skip the file or quit the setup. What should I do? What will happen if i exit the setup now? I selected retry and i get the same thing.
View 8 Replies View Relatedso right after normal windows screen shows up when chkdsk normally runs after an error, Chkdsk runs... but i just see a black screen.i can hear hard drive going, light flashing... i even see the folders where it had repaired stuff Found.000 after.i can even "push any button to halt chkdsk" to stop it.i used to see it run repair with the % showing for each drive it checked.
View 4 Replies View RelatedCan anyone help me out with reformatting windows 2000? i dont know how to reformat
View 1 Replies View Relatedam trying to reformat a Dell Dimension on Windows XP Home, and have never had a problem like this, don't know what I am missing, the machine was purchased with XP home on it, and there is a reinstall disk. When you do the reformatt when it comes back up and runs through the process it does not ask for the product key? It reformats and when machine is supposedly all set up and ready to go half the information such as ethernet card, audio drivers etc is not there. If you are doing a complete reinstall should it not ask for the product key??? This really has me puzzled, I have reformatted 3 times, and am not coming up with the proper setup.
View 7 Replies View RelatedCan someone please help me with reformating my windows. i dont have the original windows cd because this computer was given to me and there is nothing that i want on there.
View 2 Replies View Relatedi am likely going to reformat my computer due to a severe virus (see my other post). my brother told me to find the reboot disc before i reformat it, but i cant find the disc! do i even need this disc? i'm not even sure if my computer came with one
View 1 Replies View Relatedi had done this many times before but have never stopped at an error like this from reformatting and installing a fresh xp on to a harddrive. I was trying to reformatt a brand new xp onto the harddrive cause for some reason the old one won't load up to desktop and it says system32/config is missing or something and needs reapir but i had try to repair several times and it freezes. So when i put the xp disc in it ask me to press f8 to agree and stuff to install windows XP just after that, it says at the bottom searching for pervious version of microsoft windows, i had restarted many times and tryed again but nothing ever happens it just says it. I even tryed leaving it to load for 14 hours and nothing happened..... im guessing something from the pervious version of windows was corrupted so it wouldnt install a fresh copy. But i really need u guys help on this. Can someone tell me how to fix this problem all i want is a fresh copy of xp on the harddrive and all the windows gone.
View 8 Replies View Relatedi am using windowsXP on my Lenovo laptop. My harddisk was partitioned into c and d drive. How do I join this 2 drives back into 1 drive without reformatting.
View 6 Replies View RelatedI read somewhere that everytime you reinstall and reformat Windows XP, you lose some space on the hardrive. I am just curious if this is true or not.
View 14 Replies View RelatedI have receintly purchesed a hybrid-self built computer, rather relyable and fast, but since i brought it home it would periodicly stop in mid function and reboot all while case lighting uninterupted. I tried to replace oem powersupply with a much more capible one of 700w and still system will stop in mid-function and reboot as if reset
View 2 Replies View RelatedI've recently formatted my HD and run Partition Magic to create 5 partitions but now every time I reboot, CHKDSK runs to check each drive, but doesn't find any problems. My drives and labels are as follows; O.S.(C), DVD Drive(D), DVD/CD-RW(E), Data(F), Games(G), Video(H), Music(I). I'm running twin WD 250 GB HD in a RAID 1 configuration. 30 GB dedicated to (C) and the rest are split to contain between 50 to 60 GB. I've also adjusted the cluster size to 16K. File system is NTFS and os is Win XP Pro. I haven't installed any antivirus or firewall because I'm not connected to the internet yet. Also no progs running on startup. This is a fresh HD with nothing installed except os and drivers. Partitioning was fairly easy and straight-forward so I'm really scratching my head to figure out what is wrong.
View 4 Replies View RelatedEvery time I open Windows XP, I get a message saying "One of your disks needs to be checked for consistency" Then it runs a chkdsk.It reports no errors and opens as usual.Then if I try to defrag the disk that is checked, I get a message saying Diskeeper has detected that CHKDSK is scheduled to run. This is due to a user request or because the Operating System has found errors in the file system.I have run Chkdsk on this drive, but no errors have been found.I have not scheduled Chkdsk to run on this drive.If I then try to reboot, the same procedure occurs again and check disk does not report any errors.
View 8 Replies View RelatedChkdsk runs at startup due to me resizing and shifting my NTFS partition to the left. Running "fsutil dirty query C:" returns the message: Volume - C: is Dirty. I know this problem can be solved by running chkdsk but I also know from prior experience that it will cause a lot of problems. I'm not having any problems. Windows XP is running very fast and works just fine. I just know from experience that if I allow chdsk to run that it will mess with my OS.At boot it gives me the option of not allowing chkdsk to run, which I don't. Is there anyway that I can disable chkdsk from running at boot?
View 1 Replies View Related