DBase IV Runs Poorly - Keyboard Input Slow And Sporadic To Display
Sep 15, 2005
I have been coding in dBase since 1982. Upgrading to Win95, 98 and ME was no problem. But now that I have upgraded to XP on a 3.2 ghz Intel machine with a gig of ram, I am having two serious performance problems. I am using dBase IV 2.0. Keyboard input is slow and sporadic to display. Printing is delayed by up to a minute, but will execute immediatley if I exit the program. I have tried changing every aspet of the short cuts properties, including compatibily option, and executing it from CMD.EXE instead of COMMAND.COM.
Its a Laptop - C2D T5780,2GB RAM, 320GB HDD Windows XP SP2 Avira Antivirus says everything is fine, so its not viruses.The problem is that windows xp hangs after booting up to the welcome screen where i select the user and key in the password.It happens fairly regularly, like once every 5-6 times i boot up the system. By hang i mean that it doesn't take keyboard input, i can move the mouse cursor around but clicks don't have any effect. The HDD activity LED keeps blinking fairly regularly. Like every 5 seconds.I end up having to do a hard reboot.
I am working with a Dell 2400 running Windows XP Service Pack 3 with a Pentium 4 2.8 GHz processor and 1.2 gig of ram. It still seems particularly slow. I am not sure if it some of the applications that I am running like Norton 360 or some of my settings.
I just bought this new computer for a few months ago. And for some reason it stopped a few days ago and i tried reformating alot of times, most of the time it would stop or just get error's while installing but i finally installed it. And it runs like a snail.The computer basically doesnt run like how it should be running.I have Pentium 4. 3 Ghz - 1GB Ram - 256 MB Graphics Card.
It takes up to 15 minutes to start up when you first turn it on. Often takes up to 20 seconds for programs to come up when you hit start. Virtually all software programs take time to come up, even little ones like Notepad. Have lots of slowdowns and freeze ups when using the internet, including trying to type in url's. Anytime the computer isn't in use for a little while, starting up again is always very slow with frequent little freeze ups. Lately, even when we first turn the computer on, we get a low on virtual memory warning in the lower right corner. Somebody told me this could be the problem. If so, why would it need more memory now than in the past when it worked ok?We actually deleted lots of files and some software programs not be used, including video games.We used Spybot, Malwarebytes and our anti virus program a few days back and all 3 came up with no problems.
The main issue is that as soon as I connect to the internet, it takes about 10 minutes for me to be able to do anything. Before the connection is established, the system is normal. After connecting, I can't open any programs, or even task manager or control panel. After about 10 minutes, everything opens and seems to run normal, but still a bit slow. If I disconnect and try to log off or shut down while waiting for IE to open, it freezes the computer and I have to manually shut down. I do go through the task manager and shut down everything that I can before signing on to the internet and it does not make any difference.
am using my laptop for 2 years now, there is a constant problem that happens so many times lately. the pc suddenly become very slow. it happens when it's freeze for 6-7 second (i think its hardisk) and the sound stuck for this period of time ,and then it becomes very slow when u try to do anything with inconstant sound(or slow). this freezing occur once in a while, some times after this, it's run regular without any problems and some times.it goes bad forever (blue screen,slow.)i can solve this problem by restoring my system in less than 30 minutes (which i did alot) but am sick of it.. i want to know what i had to do to fix this problem and to change the hardware if necessary to prevent further problems.who know what it could be the problem or had similar issue , please response..the usage of cpu is 18% when am not doing nothing,it goes to max 50-55% when i open a new program, when am looking at CPU Usage History one of CPU's reach the top the other nearly nothing!
My computer starts going really slow after about 11:00-12:00 PM-AM (Programs take forever to start/open and games take about 20 minutes to load.) until i wake up (About 10-11:45 AM ). Anywho I was wondering if there is any thing I can do to help my computer run fast for 24/7, give or take.Just to let you know I'm Not that good with technical stuff, so if there's any that would be difficult for a noob you'll have to explain slowly.
A friend gave me mccaffee firewall to put on my computer yesterday, add to my mccaffee security suite.It was an win rar file that I exracted and installed. Now, my machine is running funny.Dvds in media player are forced to close after only watching maybe 5 minutes of them.I got a message appologizing, but media player was going to have to closed.I followed the tabs to see what the error report said, and it sighted a file in my local/temp folder.I went and tried to delete the file, but it would not go, said it was being used by another program, though I had closed all open programs. In addition, the mccaffee extraction on my desktop will not delete, even after running msconfig and disabling all startup programs, restarting in safe, I still get a message saying that the files are being used by another program.
A few weeks ago I decided to try messing around with the RAM. I took out the last stick and the computer, yet again, seemed to work perfectly… for a week at least (enough time for me to assume it was fixed). The problems persisted. Note that by now not only did I have bsod problems but simple problems like browsers not being able to open, programs crashing at a very high rate,windows unable to shut down, etc. (these reasons made me decide to start experimenting with the RAM) After RAM stick #4 did not work, I started switching out ram (to no avail) And just yesterday I took them all out and put only two in, so I am running 2 gigs memory
Last night, my computer seemed to run fine, I got my hopes up yet again. This morning my comp bsod’d. After waiting an hour, I turned my computer back on and now I have a constant “Microsoft windows, the system has recovered from a serious error” error report sending thing, which no matter how many times I click don’t send or send it will pop up again. I have moved it to the corner of my screen to write this. I believe I may have had this problem before and just restarted to fix it, but I am not sure.
i have xp sp2 and i noticed within the last week if i have 2-3 programs open at a time the screen freezes for like 30 secs or so,but when i check its says the 3 programs use %32 of my cpu usage,does that really matter?Also xp keeps telling me bout virtual memory too low?how can i speed things up again?i defraged,registry fix,usual virus scans and nothings working
I've got an old msi K7N2G-L board/computer and it's got an old WD1200JB installed and running xp. The problem is that it boots and runs slow as molasses, I'm talking like 10 mins to get it to the log in screen and opening apps takes a good 2-3mins before opening too. If I run a defrag on the drive, things temp speed back up to normal, but as soon as I reboot, it's slow again. If I run the defrag again, everything's cool and speeds go back to normal.So I'm guessing that there's some HD corruption on this drive (at least 5yrs old) and it keeps writing system files to the bad sections of this old HD when it's booting. I've run various fdisks, but none of them reveal any errors. (I should mention that I'm diligently proactive on Antivirus', firewall and Spyware practices, so that's definitely not an option relating to the old drive's slowness.) I've scanned with Avira, Nod32, Kaspersky, Trojansuperantispyware, and checked hijack this entries, there's nothing detected or unusual. Of course, I don't have all of these installed at once.I decided to try and swap the drive out and reinstall xp on this system using a newer WD3200 drive (that I use as a storage drive on one of my other computers.) I run the xp installer, successfully quick format the 3200 partition to NTFS, and everything proceeds fine and fast(keep in mind the 3200 drive was used to store data on my newer comp and was already formatted to ntfs.) Unfortunately, after it successfully finishes the initial install, it gives me the 15 second reboot warning. Okay, I let it reboot, but instead of continuing the install after the reboot, the system hangs on "Verifying DMI Pool Data" and that's it. Nothing happens and I am unable to finish the installation. I tried this like 10 times with 2 different XP home's and I keep getting the same problem. When I go into Bios, the drive is recognized as a 3200/automatic settings? I can't see why xp installs fine on the old WD1200, but not on the WD3200.
how can I make my pc run better. For example~ upon weeks/a month upon a new reformat my pc runs great, programs, games, etc... but after a while it just runs slow. especially when my son tries to play a game. the game skips alot, the video plays in slow motion, etc. When I know that any other time it works fine. even when I open a folder or IE it hangs for 10-30 secs...
I have a Toshiba Satellite (it's about 2yrs old). Yesterday I did a interlnet explorer update and when my system did a restart to install the screen went black. I powered off then on and it would goto the xp loading page then go black again. Tried to restart several times sometime I could get to the login page and once I logged in my desktop would appear but I could not do anything. Tried f8 went to last known good configuration but still same issue. Tried safe mode but you can not do a restore in safe mode. Several times when i was able to get logged in a blue screen would flash but very fast and it would say something about an error and needing to restart.
1st I use internet explorer for my web browser. At work when I click on it it pops right up with out even thinking about it Page loads with in 10 seconds every time. At home. Some times it will take 30 seconds to a minute to start after I click on it.2nd issue is this Occasionally I will come into my computer after not using it for 8-10 hours or so and I will have a ton (sometimes 40+) Error messages that say "unable to launch restart.exe".I can close all of them but then the computer runs like a tank. I always have to do a hard shut down after this too.It will NOT restart using the proper methods just hangs up.
computer is running at 100% CPU so, you guessed it, very slow. In the processes it shows the spooler.exe using the power alternating with the System(at bottom of list) - but mostly the spooler.exe. The problem really started when he changed an ink cartridge.Does any of this make sense?
My XP Pro machine at work has recently started running extreamly slow on bootup. It runs fine up to the username and password window, but as soon as i sign in it then takes atleast 15 min before i can use it. I have a PF usage of 2.24 gig during this time and my HijackThis details are below:
I know you all seen this problem before but I've got to try. I have a Compaq, with a 60 gig hard drive, 384 of memory, 1195 Mhz processor and running windows XP. My computer runs like it was at the tops 300 Mhz. I've check for virus and spy ware, deleted unnecessary files, uninstall most of my games, defrag the c drive and defrag my registrey. I even changed my battery. And it still runs slow. Any suggestion on what I can do? I'm about reading to throw it. Also it is constantly freezing up on me. Man I thought XP wasn't to do that. It's worse the the millinum. my programs are constatly not responding.
First off i downloaded video ax object a few days ago and i then read up about it and realized it was a virus. From everything i read, it should show up in add/remove programs and in programfiles folder. It showed up in neither, the only thing i found was a folder named video ax access or something like that in programfiles folder but the folder was empty and no hidden files in it so i deleted it. When I downloaded setup.exe of the video ax object and double-clicked on it and agreed. Then it quickly installed without specifying where to save it?? Computer was totally fine for about 2-3 days no problems.
Firstly it's veeeeeery slow booting up, when on the xp loading screen the scrolling blue bars will stop, sometimes for over a minute. When it eventually gets to the user log on screen it again takes forever to load. Secondly. I removed a couple of progs. msn and google search bars and motorolla phone tools. On restart it just kept rebooting after getting a BSOD. I started in safe mode and took the check out of automatically restart in startup and recovery, and it now seems to be ok. Thirdly. my keyboard isn't working, I am having to use the onscreen keyboard which is a pain.
Like the title says, everytime i turn my machine on the windows page appears on start and the load bar just keeps going. I left this running for an hour and nothing happened.
I have read tons of stuff and tried loads of stuff and yes you guessed it nothing has sorted it out.
My computer knowledge isnt great so if this requires Bios work or Command prompts i will need some detailed help.
I've spent several hour perusing google searches, but haven't found anything high enough quality to suit my needs. I have an Xbox 360 set up to run on my monitor, and until recently had the audio run through my line-in connection and output through my headset with 3.5mm jacks. Then I bought a usb headset, and can no longer find a good way to pass the line-in audio through to the usb sound card built into the headset.I tried using Audacity to playback audio as it recorded, and it works, but the sound quality is terrible, and I really would like a better solution than that.Other things I've tried is using a winamp plugin (I couldn't even get that to start working) and opening my computer's basic sound card's input as a capture device in VLC media player (couldn't get it to work either).Can anyone provide a better way get the Xbox audio to the usb headset? an increase in sound quality to audacity would be ok, I may just need to learn to set it up better.
I am attempting to reinstall windows 2000 via a boot disk. The windows 2000 that was running will no longer start due to a corrupt system file (probably due to and improper shut-down). I've got the system attempting the boot from the disk just fine and it seems to be ok. While it begins to boot in dos, I get the msg; [DR-DOS] A:> and it awaits my command. I'm not sure what to imput in order to get the boot disk to run. I've tried to direct it to the disk drive and the filename of the ISO file on the boot disk, but does not recognize it.
I did a defrag last night... and also removed several programs, and I believe I deleted something by accident on the add/remove list. I cannot get music to play... I cannot get audio, period. All I get is a beep when I try to access an audio application."this computer does not appear to have audio input capability, or it is not configured correctly
I have a strange anomoly when reinstalling XP. After the installation reboots into device configuration and I "ok" the keyboard config, the product key entry page comes up and locks the system. I am befuddled. I have tried booting into safe-mode (can't boot into safe-mode during setup), restarting the installation, running repair on the installation and chkdsk /r. I was able to install a second image to a new system directory. I would rather not rebuild my entire configuration via the second image. Anyone have an idea why the original installation is freezing as indicated?
PC hangs in any one of the following ways;screen blinks black for a second of so, then returns but is frozen (no mouse movement or anything)screen blinks black and returns but all garbled & corrupted and frozen screen blinks black and monitor says "no input" and promptly turns itself off this usually occurs between half an hour and an hour of turning the PC on.. but the duration is by no means fixed, and it will sometimes only last a few minutes. the same applies after a restart.
I just wanted to get some input on the viability of the integrated backup utility in Windows XP.Is it a workable solutions for a small business with 10-15 desktops to backup to a file server? What is a restoration like? Other (potentially better?) options.
hey when i turn on my computer all the lights turn on and it makes this noise the fan starts but then it stops and everything just turns off the screen comes up NO INPUT SIGNAL and then POWER SAVING.
I'm running winxp (en) on a pentium 4 machine with 512 MB RAM. Out of a sudden, my language bar on the taskbar was completely empty. in "text services and input languages" The language bar is greyed. I managed to set a key combination in order to switch back and forth beetwen French German and english. (Shift+Left Alt) is not working any more. When I run Winword (Office 2003) , the correct language is displayed in the status bar but Winword does not seem to recognize the language correctly what was the case before.
When I turn on my PC the POST and the Windows Loading Screen appear on the monitor, but then after that the monitor says there is no input when I'm supposed to be able to see the login screen. The monitor is still working properly as I'm using it right now with it connected to my laptop.The only thing I can think of doing is reformatting and re-installing Windows XP. I've got all my data, because I made a backup on the external HDD the night before, but I'll check it on the laptop to see if it works before I do anything. I was going to do a reformat anyway as I kept getting blue screens when I tried to play games or use Windows Live Messenger's sharing folders, but I'd still like to be able to actually go on the PC one last time to see if I've got everything.
