Hi all
Like the title says, everytime i turn my machine on the windows page appears on start and the load bar just keeps going. I left this running for an hour and nothing happened.
I have read tons of stuff and tried loads of stuff and yes you guessed it nothing has sorted it out.
My computer knowledge isnt great so if this requires Bios work or Command prompts i will need some detailed help.
Cheers All
AndyP
i think im postin in the right place. I have a system that i built about a month ago that keeps crashing and i dont know why. It runs XP. when i start the computer, it will either shut down after the windows loading screen, shut down after the motherboard maker screen, or shut down as soon as i power up. I buit it, but this is the first time ive done anything like this before, and i dont know much about the workings of the insides yet.
View 7 Replies View Relatedso right after normal windows screen shows up when chkdsk normally runs after an error, Chkdsk runs... but i just see a black screen.i can hear hard drive going, light flashing... i even see the folders where it had repaired stuff Found.000 after.i can even "push any button to halt chkdsk" to stop it.i used to see it run repair with the % showing for each drive it checked.
View 4 Replies View RelatedI have receintly purchesed a hybrid-self built computer, rather relyable and fast, but since i brought it home it would periodicly stop in mid function and reboot all while case lighting uninterupted. I tried to replace oem powersupply with a much more capible one of 700w and still system will stop in mid-function and reboot as if reset
View 2 Replies View RelatedI've recently formatted my HD and run Partition Magic to create 5 partitions but now every time I reboot, CHKDSK runs to check each drive, but doesn't find any problems. My drives and labels are as follows; O.S.(C), DVD Drive(D), DVD/CD-RW(E), Data(F), Games(G), Video(H), Music(I). I'm running twin WD 250 GB HD in a RAID 1 configuration. 30 GB dedicated to (C) and the rest are split to contain between 50 to 60 GB. I've also adjusted the cluster size to 16K. File system is NTFS and os is Win XP Pro. I haven't installed any antivirus or firewall because I'm not connected to the internet yet. Also no progs running on startup. This is a fresh HD with nothing installed except os and drivers. Partitioning was fairly easy and straight-forward so I'm really scratching my head to figure out what is wrong.
View 4 Replies View RelatedEvery time I open Windows XP, I get a message saying "One of your disks needs to be checked for consistency" Then it runs a chkdsk.It reports no errors and opens as usual.Then if I try to defrag the disk that is checked, I get a message saying Diskeeper has detected that CHKDSK is scheduled to run. This is due to a user request or because the Operating System has found errors in the file system.I have run Chkdsk on this drive, but no errors have been found.I have not scheduled Chkdsk to run on this drive.If I then try to reboot, the same procedure occurs again and check disk does not report any errors.
View 8 Replies View RelatedChkdsk runs at startup due to me resizing and shifting my NTFS partition to the left. Running "fsutil dirty query C:" returns the message: Volume - C: is Dirty. I know this problem can be solved by running chkdsk but I also know from prior experience that it will cause a lot of problems. I'm not having any problems. Windows XP is running very fast and works just fine. I just know from experience that if I allow chdsk to run that it will mess with my OS.At boot it gives me the option of not allowing chkdsk to run, which I don't. Is there anyway that I can disable chkdsk from running at boot?
View 1 Replies View Relatedi am having windows xp with service pack 3,intel 1.8 ghz,1 GB RAM,i have APC UPS for my system,now i want to shutdown my pc if it runs in UPS battery,i want to automatically shutdown my pc if it's running in UPS battery power,is there any tool to do that?
View 19 Replies View RelatedI just bought this new computer for a few months ago. And for some reason it stopped a few days ago and i tried reformating alot of times, most of the time it would stop or just get error's while installing but i finally installed it. And it runs like a snail.The computer basically doesnt run like how it should be running.I have Pentium 4. 3 Ghz - 1GB Ram - 256 MB Graphics Card.
View 14 Replies View RelatedIt takes up to 15 minutes to start up when you first turn it on. Often takes up to 20 seconds for programs to come up when you hit start. Virtually all software programs take time to come up, even little ones like Notepad. Have lots of slowdowns and freeze ups when using the internet, including trying to type in url's. Anytime the computer isn't in use for a little while, starting up again is always very slow with frequent little freeze ups. Lately, even when we first turn the computer on, we get a low on virtual memory warning in the lower right corner. Somebody told me this could be the problem. If so, why would it need more memory now than in the past when it worked ok?We actually deleted lots of files and some software programs not be used, including video games.We used Spybot, Malwarebytes and our anti virus program a few days back and all 3 came up with no problems.
View 14 Replies View RelatedI have windows xp and all previous service packs have been installed thru automatic update. However when trying to install SP 3 using windows update it fails to install. I have then gone to the Microsoft website and downloaded SP3 and tried to load it from my desktop. It will go thru the installation and when it gets to the finish stage it seems to stall. I have left it run for over 1 hour with out it finishing, I have both tried to shut down andnormally and also hold the on button to turn the computer off. Windows will then only start in the safe mode. In the safe mode I can go back to a previous date and restore settings and re-start in the normal mode.
View 10 Replies View RelatedWhether it's 1 in the afternoon or 1 in the morning my PC clock always says 13.00
I've got it set to sync with time.windows.com, and I've manually put it right several times but it keeps going back to this 12hr cycle.
Okay, I have this laptop with Vista Home Premium that I just can't stand stand anymore. I decided to try to install XP pro on it. I partitioned off a part of the HDD to store data backups and proceded with wiping Vista off the primary partition and went ahead to installing XP. When trying to install XP pro SP2 it got all the way to the partition setup and it did not read the HDD at all. If I press enter anyway I get a BSOD that has a setupdd.exe error. I have researched this error and it seems to relate to hardware incompatibility. I tried installing XP pro with the service pack 3 beta slipstreamed in and had the same problem. I also tried Black XP and it would not even boot from the disk. Then as a last resort I tried installing LastXP and it seemed to have alot better luck. It read the HDD and started installing but it always fails to copy the file "iastor75.sys" and after clicking "skip" it finishes the setup and reboots to another BSOD. I have no idea what iastor75.sys is. I have tried google searches and found nothing conclusive.
BTW my laptop is a Gateway MT6730.
I really really really want XP on this computer. Do you guys think that if I slipstreamed in some chipset and HDD drivers onto the XP disk it would work?
Any comments on this would be greatly appreciated.
My hard drive keeps running for about 15 minutes after each start up. It seems to be reading or writing something. I have Norton Antivirus 2005 fully updated. I know it isn`t that program running. How can I find out what is running on my hard drive after each start up? I understand that programs start up when you start Windows XP but all programs and my desktop are already loaded and then my hard drive just keeps running as if it is loading something but nothing seems to load. It runs for 15 minutes erratically after windows and my programs start. Must be a way to monitor what the hard drive is doing when this happens. Any suggestions?
View 8 Replies View RelatedUsing XP service pac 3, my hard drive never idles. I've scanned with Super anti-spyware and Zone alarm and can't find any problem. Windows task manager shows no applications running. I've seen other posts about this but the thread has run out on the most recent.
View 14 Replies View RelatedScenario:
I had a computer that dual boots 98 and XP. Everything was working well
except I had a problem with the hard drive light coming on all the time
when running XP.
I decided to upgrade so I built me another faster computer and moved all
the hard drives to the new one. I did a repair install of both operating
systems to get the drivers right. And it's working fine and faster. BUT,
I am having the same problem with the hard drive light in XP. When I
first boot up and everything settles down, the light goes out. After
about 15 minutes, it starts flickering a little. By the end of a half
hour it is on constantly. Indexing is turned off on all drives. Task
manager shows nothing running that I don't recognize. Idle process is 98-
99%. I've gone into services and stopped every service that's stoppable,
one at a time. None of them made it stop. If I reboot into Windows 98 and
let it sit, the light stays out. I'd like to think it's a hardware
problem and that the drive really isn't running but the light is on. But
now that it's doing the same thing on a second computer and it doesn't do
it in Windows 98, I know that *something* is accessing one of the drives.
I have unplugged my ethernet cable. It isn't that. I have done a
diagnostic startup with nothing but essential files loading but it still
does it. If I boot into XP's Safe Mode, the light will stay out. So it is
just happening in XP in normal mode, no matter what I have running or
don't.
Any suggestions what to look for now? Is there any app available that
would show what is accessing hard drives?
--
--- A Freudian slip is when you say one thing but mean your mother. ---
My floppy (A: drive) runs intermittently when my PC is on. Here is what I have come up with so far. This started after I reformatted and reinstalled XP Pro. During the reinstallation I did not use the floppy for anything so it is not hanging and waiting for a file. I have checked my registry for any reference to the floppy. I have uninstalled NAV and MS Office and it still happens. I have not made any changes in my BIOS. It boots into the hard drive first. I have cleaned out the recent documents file area. I have checked my startup folder. Sometime it will access the drive while surfing in IE and clicking to another web page. Just clicking the "My Computer" icon will make it run. I have Googled and tried everything I can find and the problem persist. Any thoughts? Thanks
View 4 Replies View RelatedI have a problem that has haunted my computer for a couple of years now. If/when I suffer a power loss at home and my computer goes down unexpectedly, this problem is most likely to occur. When I power the thing back up, it seems to be fine but if I let it sit idle for an hour or so, the hard drive starts running full blast and it won't stop. It brings everything to a halt and even if I try to open a program or a webpage, it takes several minutes. I have had task manager open when this lockup occurs and the CPU shows to be doing little or nothing. The hard drive light doesn't flicker like during startup, it's on solid. The only thing I can do to stop it is a hard reboot. This problem eventually works itself out after a few days or a couple of weeks...until the power goes out again. I have ran two different anti-virus', spyware, and come up with nothing. None of the processes in the task manager seem to be out of the ordinary. I have tried to defrag but Windows says it is not needed at this time. If I try to defrag anyway, it locks up after a while, hard drive spinning way. I'm not too techie so the fix needs to be simple, or give me a way to stop the HD without rebooting.
View 12 Replies View RelatedThe main issue is that as soon as I connect to the internet, it takes about 10 minutes for me to be able to do anything. Before the connection is established, the system is normal. After connecting, I can't open any programs, or even task manager or control panel. After about 10 minutes, everything opens and seems to run normal, but still a bit slow. If I disconnect and try to log off or shut down while waiting for IE to open, it freezes the computer and I have to manually shut down. I do go through the task manager and shut down everything that I can before signing on to the internet and it does not make any difference.
View 2 Replies View RelatedRuns checkdisk every time at reboot what might be wrong?
View 3 Replies View RelatedWhenever I open my IE 6 (Windows XP), I can not maximize it. It is running only on my Taskbar (Task manager shows that IE is running) and even when I right click and choose maximize, it will not. I reinstalled IE 6 and it still didn't help. The way I browse now is by opening a window (like my computer) and typing the url in the address bar, or by using Netscape Browser.
View 2 Replies View RelatedI bought a new maxtor 250 gig hd and set it to be master drive C. I had a 80gig hd that came with my dell. I set it to slave drive E for storage reformatted it clean. For some reason on restart or bootup chkdsk runs on drive E. Finds no problems. Never has. I am running xp home sp2
View 3 Replies View RelatedWhenever I reboot CHKDSK runs weather I have told it to or not.A previous hard drive was failing on this PC. I had Norton Ghost making images on another HD. So when it failed, I was able to make that backup HD the Boot drive.I think that maybe while the old drive was failing, some data was corrupted. Because during the CHKDSK process,
View 2 Replies View RelatedHi, Somehow my daughters computer is stuck rebooting. When you start it up chkdsk attempts to run and if you hit any key in the allowed time period it does not just skip chkdsk as it has in the past, it continues to reboot again and again. Even if you let the chkdsk utility run it just reboots when its finished and we're back to square one. How do we disable chkdsk or Autochk.exe if that's what is happening and will this solve the problem maybe?
View 3 Replies View RelatedWhen I set CHKDSK to run at next restart, it does NOT display the usual CHKDSK text interface with the runnning progress of the operation. Instead it runs while displaying the Windows Logo screen, not with a running progress bar like ususal though. The logo screen color pallette freezes until CHKDSK is done, then the machine reboots like normal. What happened to my CHKDSK text display? This also happens when I set Diskeeper 7.0 to run at boot time. Instead of the Diskeeper text display, it does the same thing as CHKDSK. Any ideas?
View 7 Replies View RelatedMy computer fan runs and stays on no booting to post and stays on really loud can not figure this out! What am I missing I turned the computer and tried to reboot after the video screen went crazy and loud noise scrambled appeared! lease help! Does my poor partitons are 28 in number on my biggest drive of 1000gb
View 1 Replies View RelatedI have winxp sp3, legal version, automatic updates.From yesterday, whenever I press CTRL, my default browser launches.I had Chrome, I uninstalled it, but the story goes on with IE. If the browser is turned on, pressing ctrl opens blank page.
View 7 Replies View Relatedam using my laptop for 2 years now, there is a constant problem that happens so many times lately. the pc suddenly become very slow. it happens when it's freeze for 6-7 second (i think its hardisk) and the sound stuck for this period of time ,and then it becomes very slow when u try to do anything with inconstant sound(or slow). this freezing occur once in a while, some times after this, it's run regular without any problems and some times.it goes bad forever (blue screen,slow.)i can solve this problem by restoring my system in less than 30 minutes (which i did alot) but am sick of it.. i want to know what i had to do to fix this problem and to change the hardware if necessary to prevent further problems.who know what it could be the problem or had similar issue , please response..the usage of cpu is 18% when am not doing nothing,it goes to max 50-55% when i open a new program, when am looking at CPU Usage History one of CPU's reach the top the other nearly nothing!
View 14 Replies View RelatedMy computer starts going really slow after about 11:00-12:00 PM-AM (Programs take forever to start/open and games take about 20 minutes to load.) until i wake up (About 10-11:45 AM ). Anywho I was wondering if there is any thing I can do to help my computer run fast for 24/7, give or take.Just to let you know I'm Not that good with technical stuff, so if there's any that would be difficult for a noob you'll have to explain slowly.
View 8 Replies View RelatedFor some reason my windows update (wuauclt.exe) file has decided to run 24 hours a day. This means that it is using 99% of my computer resources. I have
run virus and spyware and nothing, I have deleted the file that seems to be causing the problem, but it always comes back on restart.
what file runs when you click on Add/Remove Windows Components in Add or Remove Programs in Control Panel Mines malfunctioning and Id like to try and replace it, but I can't find any info on where to look for it. When I click on it now, instead of getting a box with choices for Windows, it goes immediately to the action of installing, without going through the choosing part at all
View 3 Replies View Related