Using XP service pac 3, my hard drive never idles. I've scanned with Super anti-spyware and Zone alarm and can't find any problem. Windows task manager shows no applications running. I've seen other posts about this but the thread has run out on the most recent.
View 14 RepliesI have a problem that has haunted my computer for a couple of years now. If/when I suffer a power loss at home and my computer goes down unexpectedly, this problem is most likely to occur. When I power the thing back up, it seems to be fine but if I let it sit idle for an hour or so, the hard drive starts running full blast and it won't stop. It brings everything to a halt and even if I try to open a program or a webpage, it takes several minutes. I have had task manager open when this lockup occurs and the CPU shows to be doing little or nothing. The hard drive light doesn't flicker like during startup, it's on solid. The only thing I can do to stop it is a hard reboot. This problem eventually works itself out after a few days or a couple of weeks...until the power goes out again. I have ran two different anti-virus', spyware, and come up with nothing. None of the processes in the task manager seem to be out of the ordinary. I have tried to defrag but Windows says it is not needed at this time. If I try to defrag anyway, it locks up after a while, hard drive spinning way. I'm not too techie so the fix needs to be simple, or give me a way to stop the HD without rebooting.
View 12 Replies View RelatedMy hard drive keeps running for about 15 minutes after each start up. It seems to be reading or writing something. I have Norton Antivirus 2005 fully updated. I know it isn`t that program running. How can I find out what is running on my hard drive after each start up? I understand that programs start up when you start Windows XP but all programs and my desktop are already loaded and then my hard drive just keeps running as if it is loading something but nothing seems to load. It runs for 15 minutes erratically after windows and my programs start. Must be a way to monitor what the hard drive is doing when this happens. Any suggestions?
View 8 Replies View RelatedScenario:
I had a computer that dual boots 98 and XP. Everything was working well
except I had a problem with the hard drive light coming on all the time
when running XP.
I decided to upgrade so I built me another faster computer and moved all
the hard drives to the new one. I did a repair install of both operating
systems to get the drivers right. And it's working fine and faster. BUT,
I am having the same problem with the hard drive light in XP. When I
first boot up and everything settles down, the light goes out. After
about 15 minutes, it starts flickering a little. By the end of a half
hour it is on constantly. Indexing is turned off on all drives. Task
manager shows nothing running that I don't recognize. Idle process is 98-
99%. I've gone into services and stopped every service that's stoppable,
one at a time. None of them made it stop. If I reboot into Windows 98 and
let it sit, the light stays out. I'd like to think it's a hardware
problem and that the drive really isn't running but the light is on. But
now that it's doing the same thing on a second computer and it doesn't do
it in Windows 98, I know that *something* is accessing one of the drives.
I have unplugged my ethernet cable. It isn't that. I have done a
diagnostic startup with nothing but essential files loading but it still
does it. If I boot into XP's Safe Mode, the light will stay out. So it is
just happening in XP in normal mode, no matter what I have running or
don't.
Any suggestions what to look for now? Is there any app available that
would show what is accessing hard drives?
--
--- A Freudian slip is when you say one thing but mean your mother. ---
When I boot my system, my hard drive appears to run non stop for more than 10 minutes. This is even before I log in to the system.
After logging in I see that CCSVCHST.EXE has an enormous amount of I/O reads and writes. After my machine is running for a while, the numbers get even worse.
Right now CCSVCHST.EXE shows 2:17:17 CPU time, 77,200,495 I/O Reads and 3,489,307 I/O Writes.
I realize that this is part of Nortons protection but are these numbers out of the ordinary?
My floppy (A: drive) runs intermittently when my PC is on. Here is what I have come up with so far. This started after I reformatted and reinstalled XP Pro. During the reinstallation I did not use the floppy for anything so it is not hanging and waiting for a file. I have checked my registry for any reference to the floppy. I have uninstalled NAV and MS Office and it still happens. I have not made any changes in my BIOS. It boots into the hard drive first. I have cleaned out the recent documents file area. I have checked my startup folder. Sometime it will access the drive while surfing in IE and clicking to another web page. Just clicking the "My Computer" icon will make it run. I have Googled and tried everything I can find and the problem persist. Any thoughts? Thanks
View 4 Replies View RelatedRecently cleaned up a friend's very infected machine. The jury is still out as to how much damage was done (specifically to the registry), but something weird is going on. When I right click the C drive in My Computer, the EZ CD Creator 5 install program starts executing. I didn't see a autorun.inf file or on the drive which is the only thing I can think of. Any ideas?
Figured I'd add some more info. I've installed a second drive to take backups to. Backup of 12G of data to the drive while the OS was up took 1.5 hours, took much less from an emergency disk, weird. XP SP2 256K memory. I'm also getting a windowformsparkingwindow popup on a shutdown. Reasonably sure this is due to HP stuff on the machine. Java is busted up but I wanted to start getting the backups going before uninstalling that and reinstalling.
Exactly as the file says. I try to open a drive to search through it.. such as the c: drive.. and it will do a little processing.. and it will open the browser to the 'search' program instead of opening my drive. Same goes for every file on my computer! Eek! Anybody got any ideas? I may have f*$&ed something up when I was trying to change the default folder and drive icons in the Folder Options. Anybody! This is rather detrimental to my computers health lol! help!!
View 5 Replies View RelatedI have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies View RelatedHi all
Like the title says, everytime i turn my machine on the windows page appears on start and the load bar just keeps going. I left this running for an hour and nothing happened.
I have read tons of stuff and tried loads of stuff and yes you guessed it nothing has sorted it out.
My computer knowledge isnt great so if this requires Bios work or Command prompts i will need some detailed help.
Cheers All
AndyP
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
View 2 Replies View Relatedusing XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
View 3 Replies View Relatedi have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP .
well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
I had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
View 3 Replies View RelatedWe have Windows XP Home Edition 80 GBCan we copy entire hard drive to an external hard drive?
View 36 Replies View RelatedCan anyone tell me whats the difference between a ATA hard drive and a SATA hard drive?
View 2 Replies View RelatedI recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies View RelatedI can not access hard disk properties because Windows Explorer hangs whenever I Right click on a hard drive icon. I am running WXP pro SP2 completely up to date with updates.
View 1 Replies View RelatedA problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
View 4 Replies View RelatedI am facing two problems with my lap top hp campac presario 2100.
1.The loptops battery to be changed. I dont know how many batteries are there. Any cmos battery there like any other pc. Pl advice. What would be the cost. and the model number . The hard disk requires replacement. I want to know the model numberor exact type of hard disk would be fit in. and the cost thereof.3. Windows xp home edition has been preloaded in the laptop. How to take a copy of the os and copy in the new hard disk. I have the serial number etc for the OS.
Its been a while since i needed to come here but my computer is on the verge of being chucked out the window.
I keep getting crashes, pc shuts down and then its very hard to get the damn thing to boot up again.
I have a Toshiba satellite and it has windows xp home edition. It has been making continuous clicking noises. What do I do,download or do I need to go to a shop?
View 2 Replies View RelatedSo, my dad's small business server (Windows 2003 Server for Small Businesses, HP Proliant Systems) crashes on startup, without exception, starting yesterday. Every single time I boot up Windows, it dies before getting to the login screen. Please help, as my huge important thesis papers are on there, due next week, and I'm basically ****ed if I can't recover them. Being the idiot I am, I didn't back them up, so that's about 3 months of work right there. If you guys can help me fix this, you are my saviors.
View 9 Replies View RelatedI have been having problems lately with my computer - every time i switch it on, it goes to standby. Worse still, it keeps going on standby even when it's on standby. Makes sense? It's like it's posessed!I've googled this problem, and it appears that it's a hardware problem, BUT, when i log in on safe mode, the problem disappears. So, being an average computer user, i'm pretty puzzled in the least. I have no idea what the problem was - I didn't install anything lately, or visit any webpages outside my usual ones. I haven't found a virus that acts this way, so I've ruled it out for now.
View 14 Replies View RelatedIs there a way to tell WinXP home to NOT reboot on errors from the recovery console? I tried to do a windows update and now windows won't boot past the splash screen. It gives a blue screen but reboots too fast to read it. I have had this repair successfully ONE time using a combination of CHKDSK /r and the windows repair (like 3 times each) but the problem came back when the windows update kicked in.
View 12 Replies View RelatedRecently I was having problems with my computer so I used the system recovery cd I received when I bought the computer and went through all the necessary steps to make it happen, but for some reason this time instead of being able to log back onto windows, it said my windows was not fully installed. At this point, I used the Windows XP recovery cd and deleted the partition my old windows was on and followed the necessary steps to install it, except once it gets up to the point of "Installing Devices", there is a little bar to the left and shows the progress and it gets up to about halfway and the computer restarts and it continues in this endless cycle unless.
View 10 Replies View Relatedhow do you see how much hard drive, C: space you have and how much you have available
View 1 Replies View RelatedI am trying to install windows xp sp 2 over windows xp on 2 computers and the same thing has happened with each computer.I get down to 36 minutes left - installing drivers - and the setup restarts. I tried to remove the cd and xp then asks for the cd telling me it needs the asms driver, xp then is directed to search e:I386. Xp looks for it there then spontaneously restarts again. The setup is in an endless loop going from 39 minutes remaining till 34 then restarting over and over again. How can I stop this and/or correct this? I did some research at the microsoft site but I have been unable to make anything work.
View 3 Replies View RelatedExplorer.exe will load when my machine starts up. About every 5-10 seconds, it will close, meaning my desktop blinks off. Another 10 seconds later (or around that) explorer.exe will start again and my desktop will come back. Eventually, it stops trying to load and the desktop stays off. I can go to task manager and run explorer.exe to repeat the process of having explorer.exe run, stop, run, etc. I don't receive any error messages when this happens. This machine has the latest Microsoft updates incl service pack 2.
View 2 Replies View Related