Stumped On SP2 Install - Systme Is In Fragile State
Jun 22, 2006
I recently tried reformatting my hard disk and reinstalling windows to do a "clean-up" and start anew. Upon reinstalling Windows, I tried to download and install SP2.
Once SP2 is installed, the first time this happened I received an error message that said "SP2 Instlalation failed - Systme is in a fragile state please go to Control Panel and uninstall" After that I tried reinstalling the service pack. After this, I received the blue screen of death after bootup, with a big message that I couldn't read (It was distorted by the monitor and only on screen for a little bit).
View 8 Replies
ADVERTISEMENT
Oct 21, 2009
i'm new to these forums. For the last week, i've been using an older HP Pavilon system, 933mhz with 512mb ram. My issue is this, Occasionally, when I turn on the machine, I can left click the background no problem, but if I try to click on the start menu, it's as if the left-click on my mouse doesn't work. I've found a remedy to this problem to be to alt-tab, even if no other programs are open at the time. If I alt-tab, i'm 99.9% of the time able to left click the menu bar. Now, this wouldn't be a major problem, however I have the same issue when I alt-tab through webpages, or if I alt-tab out of a computer game. Also, I play World of Warcraft, and every so often the same thing happens, however to anyone who may play the game- I am able to use the leftclick on the mainscreen, as in, to pan around my character, but if I attempt to open my bag slots, click on a monster or any of my skills, nothing happens. I've tried replacing my mouse, no good. I've tried differnt ram, same problem. I've tried a new hard drive, no good. I've FFR'd both hard drives, reinstalled windows from scratch, and STILL the problem is there. Does anyone have the slightest idea of what could be causing this?
View 3 Replies
View Related
Dec 4, 2008
We have 2 users both connected to a corporate 2003 AD Domain. One user has a printer shared out, but the other is always prompted for a password when trying to install it. The odd thing is, the username listed in the prompt is someone elses. Related problem...the user account referenced in the prompt is locked out everyday. Further research reveals there are bad logon attempts made throughout the day on this same PC, even when no one is using it. Very odd and probably a poor description. Please ask for clarification on anything that's not clear.
View 8 Replies
View Related
Feb 7, 2005
The first problem is on a computer which has xp home and 3 user accounts. The problem is that only some programs are working on the user accounts but all the programs work under the administer account. So my question is how can I get to work under the user accounts. When they were installed the box was check to let everyone that uses the computer to access the program. The other problem I am having is also with xp home. In my office I have 7 computers and they are all network. This might need to be in the network forum
View 3 Replies
View Related
Jun 24, 2006
I have just reinstalled WinXP to try to get rid of this problem but it still persists. Basically, my computer is booting itself up from a powered off state but only when the phone line is connected to it (I have dial up internet access). If the phone line is not connected to it, the PC stays off. (Note the PC isn't dialling out - at least i don't think it is). I guess the easy answer is just to remember to unplug the phone line
View 6 Replies
View Related
Jul 21, 2005
I'm creating a .bat to run a backup job and it keeps failing. The event log says that no media was specified. The job works fine if I load it to the GUI. The 4mm DAT drive is specified in the GUI but that doesn't seem to carry over to the command line. In the end all I want is a full C: backup and the system state, overwriting whatever tape is in the drive. This is the command from the .bat
ntbackup backup "@c:ackupserver.bks" /m normal /v:yes
View 2 Replies
View Related
Mar 21, 2006
I have a bootable cd that contains a backup of my system state. It boots to a dos command prompt. I cannot find info on how to restore this should I need to in the future. Also, I wished to create a ERD but I have no floppy drive. Info I have found tells me to use regedt.32 (or regedit) but info on how to create, store, restore this is confusing (involves either a long bat file or refers to how to restore from within? a domain). All I wish to do is to have the cd equivilent of the ERD floppy that I can insert when asked to do so from the W2K cd. If this is not possible, I would like to know how to accomplish this using another method.
View 2 Replies
View Related
Oct 21, 2008
My PC has upon startup has reverted to state before a hard drive format that was done July 2007. I checked a restore point and only today's Oct 21 was there and the next previous month was not Sept 2008 but July 2007.
I tried booting in safe mode for the most recent configuration that worked but no change. All folders and files since july 2007 has disappeared.
View 14 Replies
View Related
Oct 24, 2006
I am about to purchase a laptop and if there is anything I've learned over the years, it's that these companies like to cram laptops with useless software, most of which expires after a certain amount of time thus making it even more useless. What I would like to do after purchasing the laptop is completely format the hard drive and then install my own copy of Windows along with software that I do use. If anything ever goes wrong however, the originally installed version of Windows along with the manufacturer's software / utilities will most likely be needed for warranty. So my question is about how to make a perfect copy of the hard drive before formatting it. I have Partition Magic which has an option called "Copy Partition" which I imagine is what I am looking for, but I would like to make sure I don't do anything wrong.
Would I install Partition Magic, make a hidden partition that is large enough for the currently installed version of Windows and the extra "bundled" software, and then copy Windows and the software to it? After which I would then format the rest of the hard drive and then install my own version of Windows there. If anything ever goes wrong, I would format the partition I was working with and copy the hidden partition back to it. Is this the correct thing to do, and if so is there anything else I should be aware of before doing this. For example, will the original version of windows still function correctly if I ever did have to restore it? I always hear about people doing this and I assume this is what they do.
View 12 Replies
View Related
Aug 8, 2009
I would like to restore my old computer to its original state, but can't figure out how. Gateway won't help me because it is out of warranty. I have both the original DVDs I made when I bought it as well as the Recovery drive it came with. I can't figure out how to use either one. I thought the DVDs would boot from the first one and go from there, but they don't. Can anyone walk me through this using either medium?If it makes a difference, it is Windows XP home media center and a Gateway GT5220.
View 1 Replies
View Related
Aug 6, 2005
the S3 sleep state to work on the Tyan Thunder K8N motherboard running WindowsXP Pro x64? When I check my sytem from within Windows, it only says it supports S1 and S4 sleep states... I have the most recent motherboard bios and all other 64-bit updates installed... but for whatever reason, no utility, test programs or even Windows itself sees that this motherboard supports the S3 sleep state.It's a logo'd desktop motherboard, so it is supposed to support S3, but I can't for the life of me get WinXP Pro x64 to recognize that it does.
View 1 Replies
View Related
May 29, 2006
I had a virus a few weeks ago that cheese helped me with. However, now whenever I start up, I get a problem. windows classifies it as a serious problem. Here are the error messages.Also, when the computer stands by, when you wake it up, it reboots instead of just returning to its state before it went to sleep. Any ideas why? here are the errors
View 4 Replies
View Related
Dec 15, 2005
I'm having problem connecting to my wireless network.I can connect via an ethernet connection but when I go to the ipconfig command from the CMD prompt I receive the following message:Ethernet adapter wireless network connection2:Media State Media State Disconnected.If I check the wireless card's status under the Control Panel System the device is "enabled and functioning properly"I've checked the setting against the other PC's I have on my network and the settings are corrct.When I try to repair the newtork I receive a messagethat the repair can't be completed.I keep getting a pop up from windows that the wireless network is unavailable.,Obviously, I need some help finding a fix.
View 21 Replies
View Related
May 23, 2006
I have inherited an XP machine (HE SP2) that even with the owner acct, always reverts to its previous state. Install an HP printer, upon reboot the printer is history. Same with any software or user customizations.
View 3 Replies
View Related
Nov 14, 2008
I have recently restored my PC to it's original state as bought from the shop using the Recovery Disk supplied leaving just the Operating System.A friend wants to do the same but has no Recovery Disk. His PC was built by an independent.
Is there a way of creating a recovery disk to do this or is there site to download the relevant info/software.
View 5 Replies
View Related
Dec 27, 2008
I am preparing my computer for doing a full pc recovery process. I have had viruses and spyware in the past and still continuing windows errors. I want to wipe my hard drive and recover my pc back to factory HP state. I do not have any recovery discs for it. The recovery disc creator does not work and my laptop has been discontinued and they don't offer any support for it. So I will be using the recovery console partition HP has put on the computer. All of my important data is backed up to an external hard drive. Is this risky at all? Could the process error at all? I don't know if the partition could have been tampered with from all the malware and cleanups I have done to the computer. I am a little worried if something happens,
View 1 Replies
View Related
Oct 3, 2005
I am sole installer and user of my XP Home SP2 machine. I have Administrator rights; (I checked to make sure in Safe Mode as the actual default Admin).In trying to backup my System State, it "fails" 75% into it saying I don't have permission on certain sensitive files and that restore will fail.
View 4 Replies
View Related
Sep 5, 2007
hi i'm very untechy, i am getting an rpc server error and cannot figure out how to fix it. it keeps rebooting my system. so it's in a continual state of shutdown and reboot. RPC Server Unavailable, hres: 0x800706BA Register Class Objects Fail when i try to do anything it shuts down before i can complete it.. and i try to type command, but i have to go through ctrl/alt/delete to get to the run function because the taskbar isn't there?
View 7 Replies
View Related
Dec 5, 2009
while trying to fix another problem, by repairing WP on an Averatec 3200, the Install went into the actual install mode, rather than the repair mode. As I don't have the security key (someone who will go un-named, but I have my suspicions, threw away the plastic CD holder with the key taped to the back) I can't continue the install and I can't get the install off the computer. The reason that I was trying to repair is that I have the Log-on Virus which makes it impossible to log on and do anything about the virus. Can't even get to SAFE mode to try to remove the virus with Spyware Doctor.
View 2 Replies
View Related
Dec 2, 2006
When i click the turn off computer button it is supposed to install an important security update. The update thing never goes away even though it looks like the update has been installad.
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.5730.0011)
View 3 Replies
View Related
Apr 18, 2005
HI, I just installed windows 2000 professional onto my computer. Everything works fine except that the resolution is really grainy. On some web sites I cannot even make out what the words are. I found out that when I go into my monitor settings in display properties I am unable to install the drivers for my monitor. Does anybody know a way in which I can get around this.
View 1 Replies
View Related
Sep 25, 2007
I have just installed a fresh copy of windows XP sp2 on 2 machines. Both Dell Optiplex desktops. Usually it prompts that it has found new hardware for each device it hasn't found drivers for. Device manager lists them with a yellow exclamation icon.Problem I have now though is that the fresh install of XP does not show these prompt at all, although device manager lists them and if i go in there and update driver the device works.The problem I have is that basically i usually copy a driver heirarchy to the systemdrive and point the registry at them, which results in automatic installation on boot. This no longer works and I assume they are related as it doesn't look like it's automatically trying to install these devices.Is there a setting somewhere, seems very strange, what with it being a fresh install?
View 11 Replies
View Related
Feb 24, 2008
i also get the same problem with my windows xp update and the service packs.
View 6 Replies
View Related
Aug 18, 2010
I need to install directx on my coputer, don't know how.
View 1 Replies
View Related
Mar 19, 2005
I'm trying to install my printer, usb, lexmark x75 all in one. When I try to install it I get a weird rpc server is unavailable error and it won't install it.
View 1 Replies
View Related
Feb 14, 2005
I have two computers, one I use for gaming, the other for school. Both computers had 60gb Maxtor (school with lots of room, gaming with about 10 gb free). My school HD took a powder (the evil clicky noise of doom), but I was able to back up my files prior to that. Me being a quick thinker, I decide to upgrade my gamer puter to a 120gb (don't wanna go too nutso, as I am considering building a much superior computer), and put the good 60 gb in my old Athlon 700. Problem? I cannot get Windows XP Home to complete install on my gamer computer. (Athlon 700 installed just fine with 'good' 60gb).Gamer Computer: Athlon 1800+, 512MB DDR Ram 2100, KR7A Raid MOBO, GeForce3 Ti 200 (128MB DDR RAM), SB Audigy 2(AGP).
It is a RAID mobo, but i do not use the raid functionality, I did not have a problem before(I have my HD and my 2 roms on ide now). I go through the install steps, and I get to the very very end, where it states you are about to start Windows XP, and then it hangs, and thats it.I have tried to ensure there are no conflicts, I pulled out my sound card as well as my network card, and 're-seated' my video card and RAM. I have tried looking at using a winxp bootup floppy, booted into safe mode (the only error it detects is the missing RAID, no conflicts detected there). Heck, I even swapped out mouse and keyboard. I tried putting back the good 60gb back in the pc, and reformatting, but still get the same thing(sometimes the screen is black, sometimes the icky blue of xp, but that's it).I have no idea now. I did make sure that my bios was up to date before taking down the system originally, and it was, so no change was made there. Even swapped out the ribbon cables to ensure nothing was damaged on original removal.
View 9 Replies
View Related
Jul 8, 2008
I just installed sp2 but forgot that there was a third service pack. Started the install sp3, 2 or 3 hours later. It appears to be stuck on the stage of "running processes after install". I have gone all over the internet looking for a proper answer to what I should do.I have terminated a few processes that are not needed at the moment. e.g. Google Toolbar something something, iTunes Helper and iPod service. I feel the solution is to end a certain process somewhere but have no idea which one. The cancel button is also grayed out and I am updating through windows update.The computer is not completely frozen. I can still open other windows and move the mouse.
View 5 Replies
View Related
Jan 17, 2006
For some reason when i validate my XP it says its some kind of company copy or something and wont let me install SP2. Is there anyway of just downloading it and manually installing it
View 4 Replies
View Related
Mar 14, 2008
I have a deskstar 7K250 60 GB HDD hard drive and Im installing into a compaq with a motherboard cr 120 (i know putting big hard drive into that crap) anyway and the other hard drive is a Seagate Medalist 6423. well the desk star was originally partitioned into 2 drives I kinda unpartitioned it and repartitioned it later.Now then with the Seagate in their as the master I can still use the deskstar to store data. however if i try to load XP on the deskstar alone it will get through the dos format and all the way till it restarts.
after it restarts it wont load the os all the cables are connected its been partitioned into 2 drives again (though i dont think that had anything to do with it) although i think its pointless cuz i do get the 1720 SMART error but i hope thats a false sign.cuz when i have the seagate as the master im able to use it for just storing **** but Im just at my wits end and im thinkin of going "office space" on the hard drive plz i need help idk if its not compatible or what. any help would be appreciated.
View 1 Replies
View Related
Mar 11, 2006
Alrighty everyone, I believe there have been a few posts about this in other forums ect.. But I would like to here this from the experts here, and personal experiences. I have a Giga-byte K8NXP-SLI motherboard (yeah I know, I realize my mistake now...), and this board has an Nforce 4 SLI chipset. I do use the SATA-II/SATA-3G connection on the board, I run two 300GB Maxtor Diamondmax 10 SATA drives. I have installed the Nforce 4 SATA-Floppy F6 drivers on the XP install and now have not nearly as many issues as before with this chipset
View 2 Replies
View Related
Jul 7, 2008
I just purchased a used Dell Dimension 4700, it came without the OS installed or the resource cd with all the drivers. I installed the OS this afternoon, but in the device manager serveral yellow ? came up. The flags are listed for the ethernet controller, multimedia audio controller, PCI modem, SM Bus controller, unknown device, and the video controller (vga compatible).
View 9 Replies
View Related
