I have just reinstalled WinXP to try to get rid of this problem but it still persists. Basically, my computer is booting itself up from a powered off state but only when the phone line is connected to it (I have dial up internet access). If the phone line is not connected to it, the PC stays off. (Note the PC isn't dialling out - at least i don't think it is). I guess the easy answer is just to remember to unplug the phone line
View 6 RepliesI have been here a few times before mostly asking questions about memory etc. This time I have a different question I currently have two External USB HDD's sitting at 40GB each which I record shows and sports onto using my TV Tuner card. The only downside of this is that I have to unplug each one and put the other one in or vice versa everytime that I want to use them. Is there any way possible that I could plug both of these in at the same time? I had an idea that an AC powered USB HUB might do the trick?
View 2 Replies View RelatedJohn R Weiss Wrote: "BigFatGoalie" BigFatGoalie.1sd51o@pcbanter.net wrote...- I currently have two External USB HDD's sitting at 40GB each which record shows and sports onto using my TV Tuner card. The onlydownsideof this is that I have to unplug each one and put the other one in or vice versa everytime that I want to use them. Is there any waypossiblethat I could plug both of these in at the same time had an ideathat an AC powered USB HUB might do the trick? Should work just fine.
View 1 Replies View RelatedI'm creating a .bat to run a backup job and it keeps failing. The event log says that no media was specified. The job works fine if I load it to the GUI. The 4mm DAT drive is specified in the GUI but that doesn't seem to carry over to the command line. In the end all I want is a full C: backup and the system state, overwriting whatever tape is in the drive. This is the command from the .bat
ntbackup backup "@c:ackupserver.bks" /m normal /v:yes
I have a bootable cd that contains a backup of my system state. It boots to a dos command prompt. I cannot find info on how to restore this should I need to in the future. Also, I wished to create a ERD but I have no floppy drive. Info I have found tells me to use regedt.32 (or regedit) but info on how to create, store, restore this is confusing (involves either a long bat file or refers to how to restore from within? a domain). All I wish to do is to have the cd equivilent of the ERD floppy that I can insert when asked to do so from the W2K cd. If this is not possible, I would like to know how to accomplish this using another method.
View 2 Replies View RelatedMy PC has upon startup has reverted to state before a hard drive format that was done July 2007. I checked a restore point and only today's Oct 21 was there and the next previous month was not Sept 2008 but July 2007.
I tried booting in safe mode for the most recent configuration that worked but no change. All folders and files since july 2007 has disappeared.
I am about to purchase a laptop and if there is anything I've learned over the years, it's that these companies like to cram laptops with useless software, most of which expires after a certain amount of time thus making it even more useless. What I would like to do after purchasing the laptop is completely format the hard drive and then install my own copy of Windows along with software that I do use. If anything ever goes wrong however, the originally installed version of Windows along with the manufacturer's software / utilities will most likely be needed for warranty. So my question is about how to make a perfect copy of the hard drive before formatting it. I have Partition Magic which has an option called "Copy Partition" which I imagine is what I am looking for, but I would like to make sure I don't do anything wrong.
Would I install Partition Magic, make a hidden partition that is large enough for the currently installed version of Windows and the extra "bundled" software, and then copy Windows and the software to it? After which I would then format the rest of the hard drive and then install my own version of Windows there. If anything ever goes wrong, I would format the partition I was working with and copy the hidden partition back to it. Is this the correct thing to do, and if so is there anything else I should be aware of before doing this. For example, will the original version of windows still function correctly if I ever did have to restore it? I always hear about people doing this and I assume this is what they do.
I recently tried reformatting my hard disk and reinstalling windows to do a "clean-up" and start anew. Upon reinstalling Windows, I tried to download and install SP2.
Once SP2 is installed, the first time this happened I received an error message that said "SP2 Instlalation failed - Systme is in a fragile state please go to Control Panel and uninstall" After that I tried reinstalling the service pack. After this, I received the blue screen of death after bootup, with a big message that I couldn't read (It was distorted by the monitor and only on screen for a little bit).
I would like to restore my old computer to its original state, but can't figure out how. Gateway won't help me because it is out of warranty. I have both the original DVDs I made when I bought it as well as the Recovery drive it came with. I can't figure out how to use either one. I thought the DVDs would boot from the first one and go from there, but they don't. Can anyone walk me through this using either medium?If it makes a difference, it is Windows XP home media center and a Gateway GT5220.
View 1 Replies View Relatedthe S3 sleep state to work on the Tyan Thunder K8N motherboard running WindowsXP Pro x64? When I check my sytem from within Windows, it only says it supports S1 and S4 sleep states... I have the most recent motherboard bios and all other 64-bit updates installed... but for whatever reason, no utility, test programs or even Windows itself sees that this motherboard supports the S3 sleep state.It's a logo'd desktop motherboard, so it is supposed to support S3, but I can't for the life of me get WinXP Pro x64 to recognize that it does.
View 1 Replies View RelatedI had a virus a few weeks ago that cheese helped me with. However, now whenever I start up, I get a problem. windows classifies it as a serious problem. Here are the error messages.Also, when the computer stands by, when you wake it up, it reboots instead of just returning to its state before it went to sleep. Any ideas why? here are the errors
View 4 Replies View RelatedI'm having problem connecting to my wireless network.I can connect via an ethernet connection but when I go to the ipconfig command from the CMD prompt I receive the following message:Ethernet adapter wireless network connection2:Media State Media State Disconnected.If I check the wireless card's status under the Control Panel System the device is "enabled and functioning properly"I've checked the setting against the other PC's I have on my network and the settings are corrct.When I try to repair the newtork I receive a messagethat the repair can't be completed.I keep getting a pop up from windows that the wireless network is unavailable.,Obviously, I need some help finding a fix.
View 21 Replies View RelatedI have no sound but my computer says it needs powered speakers what are they?
View 7 Replies View RelatedMy pc won't boot up I turn it on, it brings up the purple packard bell screen, it goes through all the motions you'd expect untill the "windows XP" screen usually comes up..its just black..nothing there.It will also not allow me to boot from my windows XP cd,so i dont know how to fix this!
View 1 Replies View RelatedI've a 4 yr old pc I built myself complete with an OEM copy of Windows XP.I can buy a faster compatible CPU (an Athlon XP) for the same motherboard but what will WGA do?My understanding is that I can't change the motherboard but changing some other components may be OK. s this correct or does anyone have some recent experience of changing components on an OEM XP powered machine?
View 9 Replies View RelatedI have inherited an XP machine (HE SP2) that even with the owner acct, always reverts to its previous state. Install an HP printer, upon reboot the printer is history. Same with any software or user customizations.
View 3 Replies View RelatedI have recently restored my PC to it's original state as bought from the shop using the Recovery Disk supplied leaving just the Operating System.A friend wants to do the same but has no Recovery Disk. His PC was built by an independent.
Is there a way of creating a recovery disk to do this or is there site to download the relevant info/software.
I am preparing my computer for doing a full pc recovery process. I have had viruses and spyware in the past and still continuing windows errors. I want to wipe my hard drive and recover my pc back to factory HP state. I do not have any recovery discs for it. The recovery disc creator does not work and my laptop has been discontinued and they don't offer any support for it. So I will be using the recovery console partition HP has put on the computer. All of my important data is backed up to an external hard drive. Is this risky at all? Could the process error at all? I don't know if the partition could have been tampered with from all the malware and cleanups I have done to the computer. I am a little worried if something happens,
View 1 Replies View RelatedI am sole installer and user of my XP Home SP2 machine. I have Administrator rights; (I checked to make sure in Safe Mode as the actual default Admin).In trying to backup my System State, it "fails" 75% into it saying I don't have permission on certain sensitive files and that restore will fail.
View 4 Replies View RelatedMy laptop was working fine last night - wife used it, went to do something else, I picked it up a couple hours later and it powered on but no screen image showed. I noticed after a few more tries that I could VERY faintly see the Microsoft XP logo, the HP logo, but it was close to total darkness.It's a Compaq NX5000 - I had the power cord plugged in too. Also, I saw once or twice that it seemed to power down on its own also.
View 2 Replies View RelatedI dont know if this is in the right Forum as its a strange one.Just before i was playing on Counter Strike and the computer crashed.The power was still on, on the CPU, and also on the Speakers and Monitor.But the Monitor isnt picking up the Computer, ive tried a different monitor but to no avail.Ive basically just swapped all the wires over from the computer onto one of my old computers which im on now, and there was no problems what so ever.So clearly its something wrong with the other computer, but it still powers up and is running, but just nothing appears on my screen
View 7 Replies View RelatedWhen I power down my Seagate external disk drive after completing a backup, Windows XP reboots itself. The disk is connected via firewire. The drive otherwise seems to be working properly. XP is up to date.My neighbor said he had the same problem when disconnecting his USB camera after downloading photos. The solution to his problem was to remove a recently applied microsoft fix. Unfortunately he no longer has a record of which fix
View 7 Replies View RelatedI tend to leave my desktop machine powered on for long periods of time without using it. Is this bad? Good? I have a windows xp, dell dimension p4. Does brand of processor (or Apple) have an impact.
View 3 Replies View RelatedI've got two big screen monitors connected to my 9800GT via HDMI cables. They are configured for a vertical span configuration in the NVIDIA drivers (updated to the latest version of the driver)When I turn off the second monitor which I do sometimes to save power, either windows or the nvidia drivers auto-detects that the second monitor was powered off and changes my video configuration to a single monitor configuration, resizing my desktop back to fit on only one monitor. When I turn my second monitor back on, I need to manually re-configure the video settings every time.
View 2 Replies View Relateddimension 8100 primary drive not found. no beep when powered up from mains
View 1 Replies View RelatedI recently installed three new Dell Optiplex, Ultra compact computers in a Doctors Office. To keep things streamlined and tamper proof, I located the PC's above the ceiling tiles and wall mounted the Dell 19" monitors. This installation method required me to utilize the USB ports in the monitor for the keyboard and mouse. The problem is that whenever the monitors are powered off for any length of time, the PC no longer recognizes the mouse and keyboard. A simple reboot fixes everything but due to the remote location of my PC's, a simple reboot requires a ladder and is quite annoying and time consuming in a hectic doctors office.
View 3 Replies View RelatedI saw another thread on this issue, but it didn't quite fit, so I thought I'd get others opinions. This computer was built for me by a non-major vendor. I consider myself semi-computer literate, and feel comfortable with most work required inside my case. Let me start by saying that this issue happens most often when I've woken my computer up from sleep mode. I have made no major changes to the hardware or software recently. What I did do was move the computer, rather gently, 2100 miles to my new home in a new city. The PC is under warentee, but the original vendor is rather far away. I also noticed that the first time I booted the computer after the move, the computer made a funny noise. It sounded like something (either a fan of the HD) was spinning improperly. I immediately powered down my system and rebooted, and have not had the noise since.
The full message (sans text) reads:
DRIVER_IRQL_NOT_LESS_OR_EQUAL
*** STOP: 0x00000D1 (0x000000EC, 0x00000002, 0x00000001, 0xAE5A38D4)
*** HTTP.sys - Address AE5A38D4 base at AE592000, Datestamp 41672744)
Begining dump physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance. I've also noticed that on the boot screen, my PC no longer seems to be doing a memory test, or showing my 3 gigs of memory. In windows, it appears the system sees the memory, but the memory test seems absent on boot. I have no problems, so far, running resource heavy programs. This seems, like I've said, to happen only when I sleep then wake up my PC. Rebooting from this screen will cause the PC to reboot itself constantly, but turning the PC off and rebooting seems to give me no errors, again, until I sleep it.
hi i'm very untechy, i am getting an rpc server error and cannot figure out how to fix it. it keeps rebooting my system. so it's in a continual state of shutdown and reboot. RPC Server Unavailable, hres: 0x800706BA Register Class Objects Fail when i try to do anything it shuts down before i can complete it.. and i try to type command, but i have to go through ctrl/alt/delete to get to the run function because the taskbar isn't there?
View 7 Replies View Relatedmy cd rw drive has no power to it at all, i have tried all the help solutions in the packard bee info center but nothing works. the drive is recognised by the computer when you click on the device properties and ry to trouble shoot, it also says there are no problems with the device, however if i try to access the drive via any form eg via my cd rewriting program it claims a stutiable drive can not be found! also if you try and open the cd draw
View 4 Replies View RelatedI am trying to upgrade from a Powered By ATI Radeon 9200 SE Gamer video card to a manucfatured by ATI All-In-Wonder Radeon X800 XT 256Mb AGP video card. While trying to uninstall the driver for my old GeCube Radeon 9200 SE card, I get the following error message: It says RUNDLL in the very upper left corner. The error message says, "C:WINDOWSsystem32atiiiiexx.dll,_InfEngUnstallFFile_RunDll@16 -Force_restart-flags:0x2010001 -inf_class:DISPLAY -clean" NOTE: where the smiley is, it should be D
My system is a custom-built AMD Athlon 64-bit 3000+ with 1Gb RAM running XP Pro
i downloaded "Demo Version" Jv16 Power tools 2005 from a link to find duplicate files and clean my registry, I thought that programs I had uninstalled and reinstalled for varius reasons were all duplicated with missing files. The download didn't have the handbook which i found out later i needed so now after running dup. file finder, reg cleaner. I have a very unstable system nothing stays stable and there is a mass of backups I don,t know where to start. The forum there won,t help. supposedly I got a old Beta version. My backups don,t look anything like there's. I would like to go back to before i installed with system restore point but i dont know if it can retrieve files from Jv16 backup or what.
View 3 Replies View Related