Sleep State To Work - 64-bit Updates Installation
Aug 6, 2005
the S3 sleep state to work on the Tyan Thunder K8N motherboard running WindowsXP Pro x64? When I check my sytem from within Windows, it only says it supports S1 and S4 sleep states... I have the most recent motherboard bios and all other 64-bit updates installed... but for whatever reason, no utility, test programs or even Windows itself sees that this motherboard supports the S3 sleep state.It's a logo'd desktop motherboard, so it is supposed to support S3, but I can't for the life of me get WinXP Pro x64 to recognize that it does.
View 1 Replies
ADVERTISEMENT
Sep 9, 2008
I have a home built machine running XP Pro. It is a clean installation since had some recent other problems with it and completely formatted hard drive and reinstalled XP. I have added all the Window updates including sp3. I have a GE Force 6200 video card and have installed all the drivers but the machine will not enter sleep mode either manually or automatically (I mention this because I have read elsewhere this was a problem for Vista but haven't seen anything anywhere for XP). I even set the bios to force sleep mode and nothing happened.
View 2 Replies
View Related
Nov 17, 2006
okay at first this wasn't too anoying but now it is a major problem at first it was just that when i went to windows update it would get stuck in the thing where it says that it is checking for the latest updates.to try and solve this issue i did these things:i ran windows update for 3 days straight and didn't do anything on my computer (it was stuck in the screen i mentioned before)i reinstalled windows, but for some reason the problem carried over a friend of mine told me about windows defender and that it was free, so i installed it and behold it uses windows to update and im stuck with the bare bones of the program.
View 4 Replies
View Related
Feb 1, 2009
I started having issues with IE8 although I do use Firefox for browsing, but still have to do my Windows updates and such. Then I ran a utility download to clean up PC and registry and lost the ability to do updates, and can't install Windows products, and my disk drives have driver issues. No, I did not backup or do restore point and I have tried my restore points to no avail.
View 1 Replies
View Related
Aug 11, 2005
Upon rebooting, after installation of a new firewall, I denied access to a flurry of Windows access requests until I could find out what they were I am now worried that some or many, may have had something to do with the automatic Windows updates. Everything is working fine so far, but how can I check to see that I haven't missed any updates. If access was blocked, would they automatically be re-sent?I am still trying to identify all the processes in my firewall log that I
have marked to "Ask".Secondary, unrelated question, while cleaning up my system before this installation, I found 9MB of files in the TEMP folder under my D&S, LOCAL
View 6 Replies
View Related
Jul 16, 2005
For several weeks now I haven't been able to download/update Windows updates. I have been working with Microsoft Tech Support (via the telephone)for several days now and we haven't been able to correct the problem(s). My question is... can I use the Windows Installation disk to "fix" any problems my machine is having with the downloads/updates? Is there a "fix" option on the Windows disk and am I at risk in using it? I don't want to lose anything on my desktop because it is the way I want it at this time.
View 1 Replies
View Related
Mar 16, 2008
I can not get new windows updates! I have been every where to solve this problem! My update icon showed up, so I clicked on it like I usually do, but it would not start! So, I went to start, clicked on windows update there! The page opened, but it was small and sometimes it would not fully open! It would freeze half way through the process! So I rebooted, went directly to microsoft updates, sometime I made it there sometimes I did not!
View 5 Replies
View Related
Aug 31, 2007
My tower was going into perpetual restart after bios, so I copied stuff off, then reformatted and reinstalled Windows. Did all the drivers, anti-virus, internet, so forth. I had problems with validating Windows, but that's solved now. Now, it seems, after about ten or twenty minutes, IE will not work, and I'll have to restart, to do it all over again. I haven't tried installing Mozilla to see if it works too, but I do know that the Automatic updates won't work either. It just hangs and never does anything.
View 1 Replies
View Related
Jun 12, 2005
I keep getting message to update virus definition yet each week I run a complete live Norton Virus Update. Try to manually update virus's but it does not work.
View 3 Replies
View Related
Dec 25, 2006
I reinstalled everything and downloaded all the updates. Yesterday I noticed the screensaver wasn't working. I ran ad-awarer and there were 14 objects that read "possible browser hijacking". When I tried to delete them the PC crashes. What's going on. The other glitch so far is I can't change my homepage.
View 2 Replies
View Related
Aug 22, 2007
Did a repair install, everything is working except windows updates, it says I have updates and I can click on custom and it shows them when I click to install them it acts like it will then a box comes up and say they all failed. I turned off auto updates and went to the site and click on custom and they came up but the same thing won't install did it with express install to and its the same,. Any one know what could be wring, one update it needs is the windows validation update I know the disk is valid it came with the machine and it retook the product number when I did the repair install.
View 1 Replies
View Related
Jun 28, 2005
my windows updates will not install. I have tried the all the solutions on this link but it still does not work
View 3 Replies
View Related
Jan 26, 2008
I just resently updated XP.I havn't updated XP in a long time so there were quiet a few updates. After the update I rebooted XP.When I logged into my account and started using my keyboard the mouse would not move, and the keyboard would stop working. I would even push the caps lock or num lock keys to see if the indicator lights wold turn on/off, No. I have to use the on-screen keyboard to type.
View 7 Replies
View Related
Jan 20, 2009
In 2005, I bought a desktop PC, which included an installation CD for Windows XP. That computer broke down a few months ago, so I bought a laptop with Vista pre-installed. I have grown really tired of Vista and I would like to use XP for my laptop. So I used my old XP installation CD, but after I clicked "Install", a message appeared. It told me that the installation could not be done because the Windows system on the laptop (Vista) was newer than the XP on the CD. Can this be fixed in any way?
View 3 Replies
View Related
Oct 27, 2008
I installed SP3 as a security update download for my XP. Everything went fine till after the reboot, where my D-Link program would not work. A message came up, saying it "can't find an entry point to Wlanapi.dll" I un-installed SP3 and everything is fine again.
View 2 Replies
View Related
Jun 27, 2008
i can't access windows update's websitei open up internet explorer (ie7), tools, windows update and from there nothing loads
View 7 Replies
View Related
Sep 4, 2006
I have Windows XP Home edition. After installation of Autopatcher April 2006 edition, the link on the system tray is not working properly. "Explore my Bluetooth Places" is opening with Notepad! Reinstallation of Widcomm Bluetooth software was also invain.
View 2 Replies
View Related
Oct 6, 2009
i am, or was using windows xp. started getting the error message on startup - windows root>system32toskrnl.exe is missing/corrupt etc.so i put in the windows xp cd and went to recovery and i've tried most things people have suggested, copying/expanding the file etc. but i want to try everything one more time just to cross that of the list so if u can give me some suggestions ill try them so i can let u no wot happened.
View 2 Replies
View Related
Jun 1, 2006
The last windows update that I can see is KB 905474 and was downloaded by my automatic updates.I can see it when going to windows updates/view history. Trouble is, I cannot see it in my add/remove list. does auto updates only download security updates and I assume I dont have to do anything.
View 8 Replies
View Related
Jun 24, 2006
I have just reinstalled WinXP to try to get rid of this problem but it still persists. Basically, my computer is booting itself up from a powered off state but only when the phone line is connected to it (I have dial up internet access). If the phone line is not connected to it, the PC stays off. (Note the PC isn't dialling out - at least i don't think it is). I guess the easy answer is just to remember to unplug the phone line
View 6 Replies
View Related
Jul 21, 2005
I'm creating a .bat to run a backup job and it keeps failing. The event log says that no media was specified. The job works fine if I load it to the GUI. The 4mm DAT drive is specified in the GUI but that doesn't seem to carry over to the command line. In the end all I want is a full C: backup and the system state, overwriting whatever tape is in the drive. This is the command from the .bat
ntbackup backup "@c:ackupserver.bks" /m normal /v:yes
View 2 Replies
View Related
Mar 21, 2006
I have a bootable cd that contains a backup of my system state. It boots to a dos command prompt. I cannot find info on how to restore this should I need to in the future. Also, I wished to create a ERD but I have no floppy drive. Info I have found tells me to use regedt.32 (or regedit) but info on how to create, store, restore this is confusing (involves either a long bat file or refers to how to restore from within? a domain). All I wish to do is to have the cd equivilent of the ERD floppy that I can insert when asked to do so from the W2K cd. If this is not possible, I would like to know how to accomplish this using another method.
View 2 Replies
View Related
Oct 21, 2008
My PC has upon startup has reverted to state before a hard drive format that was done July 2007. I checked a restore point and only today's Oct 21 was there and the next previous month was not Sept 2008 but July 2007.
I tried booting in safe mode for the most recent configuration that worked but no change. All folders and files since july 2007 has disappeared.
View 14 Replies
View Related
Oct 24, 2006
I am about to purchase a laptop and if there is anything I've learned over the years, it's that these companies like to cram laptops with useless software, most of which expires after a certain amount of time thus making it even more useless. What I would like to do after purchasing the laptop is completely format the hard drive and then install my own copy of Windows along with software that I do use. If anything ever goes wrong however, the originally installed version of Windows along with the manufacturer's software / utilities will most likely be needed for warranty. So my question is about how to make a perfect copy of the hard drive before formatting it. I have Partition Magic which has an option called "Copy Partition" which I imagine is what I am looking for, but I would like to make sure I don't do anything wrong.
Would I install Partition Magic, make a hidden partition that is large enough for the currently installed version of Windows and the extra "bundled" software, and then copy Windows and the software to it? After which I would then format the rest of the hard drive and then install my own version of Windows there. If anything ever goes wrong, I would format the partition I was working with and copy the hidden partition back to it. Is this the correct thing to do, and if so is there anything else I should be aware of before doing this. For example, will the original version of windows still function correctly if I ever did have to restore it? I always hear about people doing this and I assume this is what they do.
View 12 Replies
View Related
Jun 22, 2006
I recently tried reformatting my hard disk and reinstalling windows to do a "clean-up" and start anew. Upon reinstalling Windows, I tried to download and install SP2.
Once SP2 is installed, the first time this happened I received an error message that said "SP2 Instlalation failed - Systme is in a fragile state please go to Control Panel and uninstall" After that I tried reinstalling the service pack. After this, I received the blue screen of death after bootup, with a big message that I couldn't read (It was distorted by the monitor and only on screen for a little bit).
View 8 Replies
View Related
Aug 8, 2009
I would like to restore my old computer to its original state, but can't figure out how. Gateway won't help me because it is out of warranty. I have both the original DVDs I made when I bought it as well as the Recovery drive it came with. I can't figure out how to use either one. I thought the DVDs would boot from the first one and go from there, but they don't. Can anyone walk me through this using either medium?If it makes a difference, it is Windows XP home media center and a Gateway GT5220.
View 1 Replies
View Related
May 29, 2006
I had a virus a few weeks ago that cheese helped me with. However, now whenever I start up, I get a problem. windows classifies it as a serious problem. Here are the error messages.Also, when the computer stands by, when you wake it up, it reboots instead of just returning to its state before it went to sleep. Any ideas why? here are the errors
View 4 Replies
View Related
Dec 15, 2005
I'm having problem connecting to my wireless network.I can connect via an ethernet connection but when I go to the ipconfig command from the CMD prompt I receive the following message:Ethernet adapter wireless network connection2:Media State Media State Disconnected.If I check the wireless card's status under the Control Panel System the device is "enabled and functioning properly"I've checked the setting against the other PC's I have on my network and the settings are corrct.When I try to repair the newtork I receive a messagethat the repair can't be completed.I keep getting a pop up from windows that the wireless network is unavailable.,Obviously, I need some help finding a fix.
View 21 Replies
View Related
Jul 11, 2008
When starts the PC it boots normally till it reaches where it shows windows XP logo then the screen gets blank. he press the sleep button on the keyboard, then after that press the hardware switch on/off button (not the reset button) on the tower of the hard box. After pressing switch on/off button, he gets directly (pay attention to this) to the login screen where he can see the usernames for all users. He has to do this procedure every time he would like to boot the desktop.
View 1 Replies
View Related
Jan 9, 2007
The "sleep" button on my computer keyboard won't effect the hibernate function on my Windows XP Home Edition computer. It worked well until several months ago and then, all of a sudden, it stopped functioning. I can get it to hibernate by using Start-Turn Off Computer-Stand-By, but the "Sleep Button" does not work. I did some Internet research and one site indicated that it might be a driver problem.
View 6 Replies
View Related
Jun 8, 2010
I have just put together an i7 930 with an Intel DX58SO using XP Pro and USB K/Board and Mouse. How do I make it come out of sleep mode? Even the power switch doesn't do it.Reset is the only button that works but that resets of course.
View 8 Replies
View Related
