Ntoskrnl.exe Missing Or Corrupt / Installation Cd Wont Work?
Oct 6, 2009
i am, or was using windows xp. started getting the error message on startup - windows root>system32toskrnl.exe is missing/corrupt etc.so i put in the windows xp cd and went to recovery and i've tried most things people have suggested, copying/expanding the file etc. but i want to try everything one more time just to cross that of the list so if u can give me some suggestions ill try them so i can let u no wot happened.
View 2 Replies
ADVERTISEMENT
Mar 3, 2005
This fault occurs on my brothers Win Xp machine, with the machine going round in the usual startup loop and never getting to windows. When booting from the XP cd, he can't use the recovery utility, because he can't remember the Administrators password.On one occassion in the recovery utility, we somehow managed to start windows (really don't know how, because it hasn't worked since).
View 14 Replies
View Related
Feb 8, 2007
I can open up the recovery console with my winxp disc, but not long enough to fix the problem. My computer will shut down.I originally thought that it might have been an overheating issue, but i ran Sandra and all temps came up under 40 cel. I can not seem to keep my computer booted long enough to fix anything. It will stay booted as long as it is on the choice option of the Windows XP cd to install, repair or exit.
View 3 Replies
View Related
Dec 1, 2007
I learned here that it might be a keyboard issue, replaced it with one known to be good and it didn't work. After some more fumbling around looking for a solution, I unplugged the HDD and plugged in the other HDD I have on the system with a separate installation of Win XP Pro and got the exact same error, even though I know for a fact it was working the last time I had it plugged in and it has not been plugged in since then.
View 6 Replies
View Related
Sep 4, 2009
I have a system that operates on Windows NT 4.0 Workstation.It's a fairly old computer, more than 5 years. During the night the fan in the powersupply stopped working, so the computer over heated. When I came to work in the morning it had the blue death screen of gibberish.I rebooted and it doesn't go through the whole boot up sequence but gives the following message:Windows NT could not start because the following file is missing or corrupt: <winnt root>system32 toskrnl.exe Please re-install a copy of the above file.
View 5 Replies
View Related
Nov 30, 2004
I've got a Dell Latitude C840 that boots to an error message as follows, "Windows2000 could not start because the following file is missing or corrupt: Windows2000 RootSystem32 toskrnl.exe. Please reinstall a copy.". I do not have an ERD. I tried booting off the Dell Recovery CD and got to a Recovery Consel DOS Prompt and tried running CHKDSK with the /R and the /F,
View 4 Replies
View Related
Feb 11, 2010
how can solve this problem please tell me.can i use any free softwere to solve this problem.
View 2 Replies
View Related
May 7, 2005
[I cannot boot up my server. After the boot loader phase, the server stops in the kernel load phase and issues the following error message: Windows 2000 could not start because the following file is missing or corrupt: <windows 2000 root>system32 toskrnl.exe I do not have any ERD (Emergency Rescue Disks) and when I use the original Windows Server CD, I got to the Recovery Console but wont work
View 3 Replies
View Related
Feb 5, 2005
i start my laptop and i get the error message windowssystemNtoskrnl.exe missing/corrupt. After that the screen just goes blank and tries to re-boot.
View 9 Replies
View Related
Jan 7, 2005
I have one week before I head back to Iraq for another 6 months and my laptop is the only thing that has kept me saine. I tried to turn it on yesterday and It would only go to the black screen that has the start options,(safe mode, safe mode with networking,S/M with command promt,Last known config,start normally no matter what I choose it comes back with windowssystemNtoskrnl.exe missing/corrupt.
View 13 Replies
View Related
Apr 17, 2010
how to fix dell computer window root system32 ntoskrnl exe missing or corrupt
View 1 Replies
View Related
Oct 27, 2006
Hi. Stuck my friend's hdd into my computer to backup his files to dvd. Took his hdd out, and I can't boot to win 2k. I get an error saying ntoskrnl.exe is corrupt or missing, please reinstall. I plug his hdd back in and there's no problem.
View 1 Replies
View Related
Jan 26, 2005
what i would like is a step by step of how to repair this problem i have tryed copying this file from the xp disk to copy ntoskrnl.exe as follows e:where e is my cd drive e: copy e:i386toskrnl.exe c:windowssystem32 and it tells me file cant be found but when i do a dir e:i386 it gives me the file.
View 1 Replies
View Related
Jul 18, 2005
I have had my Dell computer for about a month. When I boot up I get a message saying that I can't boot up because <windows root> System32NTOSKRNL.EXE is missing or corrupt. I get the same thing for system32DRIVERS NTFS.SYS.
View 2 Replies
View Related
Apr 28, 2010
Tried the repair console typed in expand d:i386 toskrnl.exe_ c:windowssystem32 and access is denied.It never asked for a password.
View 1 Replies
View Related
Nov 9, 2007
Norton ghost Image.Well i have been successfully creating images for IBM,DELL and other PC's and restoring them as well using Norton ghost 2003.I have been assigned to create a new Image for MSI type.I have successfully created the image using Norton ghost 2003 after Syspreping the machine..Well when i restore the image everything goes fine and the image is successfully restored,but when i start the pc,it give me a message"Windows could not start because the following file is missing or corrupt NTOSKRNL.EXE
View 3 Replies
View Related
Jul 21, 2005
When booting up the laptop with win xp pro sp2, we first get the message hal.dll missing and then if enter past that we then get ntoskrnl.exe missing. Nothing has been uninstalled and the last thing to be installed was adobe. The only things ran recently was microsoft spyware and mcafee virus scanner and now it will not boot at all without these 2 files.
View 1 Replies
View Related
Nov 16, 2008
I got the following message upon booting my pc.STOP: c000021a {Fatal System Error}Te Session Manager Initialization system process terminated unexpectedly with a status of 0xc0000022 (0x000000000 0x00000000).The System has been shut down.The day before I did a windows update.I can not boot into windows.. Not even Safe Mode or dos prompt.
View 13 Replies
View Related
Oct 2, 2007
i created 2 partitions, in one i installed winxp 64, in the other i installed wxp 32, but after installing the 32 bits version and tried to boot into xp64 i got that message, ntoskrnl.exe missing or damaged whats the problem??? i can boot into the 32 bits version, but the 64 bits is damaged or something.
View 2 Replies
View Related
Sep 12, 2005
A client w/a laptop tried to boot his PC and got the error that the ntoskrnl.exe was missing. Is this a candidate for repair install or is it possible to copy the file from CD back to its original folder?
View 4 Replies
View Related
Jul 4, 2006
I started up the computer, watched the BIOS detect the RAM, hard drive, etc, and then was greeted by a blank screen instead of the Windows boot screen. It proceeded though, and after a few seconds flashed to another black screen, this time displaying the cursor. I'm guessing this is the logon screen, but nothing displays but the cursor. (Note that the video card and monitor are both fine...I tried swapping them out just in case.)
View 7 Replies
View Related
Dec 28, 2007
I have Windows XP in my system and the problem is that after installation of Windows within 24 hours corrupt...how it comes... during working suddenly system restart and afterthat windows unable to boot again...Few days before I found virus in my system FUNNY UST SCANDAL.AVI.EXE so I clean my drives with Antivirus and virus deleted ..may be this because of Virus so I scan my PC with Antivir ...and with Mcafee too but now nothing I found..
View 2 Replies
View Related
Jan 27, 2009
when I try to install win xp it goes to settup and it checks my sys and at in the middle of the settup prossess it says sbp2port.sys.
View 1 Replies
View Related
Oct 24, 2008
Did all kinds of virus and adware checks but no change. When I try to open msconfig I get a short hour glass and that is all.
View 6 Replies
View Related
Dec 2, 2004
I have fixed this problem in the past in repair mode and i want to do the same with this, but, there is no filename at the end of the statement see below Windows could not start because the following file is corrupt or missing windowssystem32configsystem Can this be fixed in repair mode without having to be reformated or reimaged.
View 4 Replies
View Related
Jul 7, 2005
I've had the familiar hal.dll missing or corrupt on starting XP SP1 on a mainboard NameMSI KM2M Combo (MS-6738).All I did was to take out the 1 Gig of SDRAM I've used OK for months and fit a new 1 Gig DDR module. A year or two back I had STOP errors through merely changing a RAM module, the simplest upgrade usually, so I kept switching RAM until it went with no STOPs. I resent having to reinstall an OS for a five-minute RAM refit! Obviously the hal error is caused by the new DDR module, since I'm now using the old SDRAM. Is there a way around this apart from the dreaded reinstall of OS? In the rare event the DDR could be faulty does anyone know a non-windows DDR test utility please?
View 6 Replies
View Related
Sep 27, 2010
i have a folder on my desktop that is not empty but when i try to open it (via GUI or command line) it will not. i get "the file or directory is corrupted and unreadable" and it wants me to run check disk. when i do, i then get an application error on boot up. so i boot in safe mode with command line and disable check disk on boot up so i can get back into windows with no problem however the folder is still there and unable to open and/or delete. fsutil tells me that the c drive is dirty, but i just can't clean it.how can i delete "C:Documents and SettingsusernameDesktopNew Folder"?
View 2 Replies
View Related
Jan 12, 2006
I restarted my computer today and right after it started booting from my C: drive, an error came up that said something like "Windows cannot find the file C:windowssystem32tfs.sys because it is missing or corrupted." It suggests that I use the recovery disk to fix it, but I don't have the recovery disk, so I'm kind of in trouble. Luckily, I had some Linux LiveCDs laying around, so I used one to boot up my system.I think that this might have something to do with me trying to change my boot screen, but I didn't mess with that particular file, so I'm not sure. Also, I haven't done anything to the RAM lately.
View 9 Replies
View Related
Oct 9, 2005
This is not your typical Hal.dll file is missing or corrupt. I've tried all the fixes, and am getting nowhere. This is a Windows XP Pro install.I tried chkdsk /R in the Windows XP Recovery Console first, and while it did complete, it reported that "the disk contains one or more unrecoverable problems." I also should note that Recovery Console did not ask me to identify the windows install, nor did it ask me to enter the Administrator password.Next, I tried bootcfg /rebuild and got "Error: failed to successfully scan disks for windows installations. This error may be caused by a corrut file system, which could prevent bootcfg from scanning.Use chkdsk to detact any errors."
View 1 Replies
View Related
Apr 22, 2007
Any way I can get one of these onto a thumbdrive from a laptop to reload into my computer?
View 3 Replies
View Related
Oct 9, 2010
I had problems right out of the gate...after typing out the first command line: tmpsystem.bak and hitting enter, I got the message that said could not find file...so I tried again and was extra diligent with my typing, but the same disappointing message came up.I decided to use some imagination and initiative and, started with the last command line first: tmpdefault.bak This worked for this line and then the next one too: tmpsecurity.bak and so on. When I got back to the tmpsystem.bak line, it even worked for that one too.
Then I moved on to the delete commands and that worked out OK...as far as I could tell?But, when I got to the repair lines and, in particular, the: repairsystem C:windowssystem32configsystem I then got the same message saying that the file could not be found...back to square one.Then I went back to the start...typing out the copy lines, and I got the same message for the system line again. So, I started from the default line again and it worked--I was asked if I wanted to re-write the first file copied and I chose Y (yes) then the same brick wall when I got to the system line.
View 14 Replies
View Related
