My PC has upon startup has reverted to state before a hard drive format that was done July 2007. I checked a restore point and only today's Oct 21 was there and the next previous month was not Sept 2008 but July 2007.
I tried booting in safe mode for the most recent configuration that worked but no change. All folders and files since july 2007 has disappeared.
I have inherited an XP machine (HE SP2) that even with the owner acct, always reverts to its previous state. Install an HP printer, upon reboot the printer is history. Same with any software or user customizations.
View 3 Replies View RelatedThe entire error msg is:
An access denied error was returned while attempting to change a service.You may need to log on using an Administrator account to make the changes.
The only account on the system is mine that is an administrator account but i still get this error.
I have only one account on my Windows and it is the administrator account (mine because I'm the only one using the computer). The problem is when I make changes in msconfig, when I click on Apply, I get this message "An Access Denied error was returned while attempting to change a service.You may need to log on using an Administrator account to make the specified changes".I am the administrator and there is no other account than mine!
View 14 Replies View RelatedAfter power outtage (yes I do know about UPSs)-after power returned I am unable to input text in any kind of field including Word, Notepad, ol express, URL boxes-nothing. I re-booted twice but still no joy.
View 6 Replies View RelatedI have just reinstalled WinXP to try to get rid of this problem but it still persists. Basically, my computer is booting itself up from a powered off state but only when the phone line is connected to it (I have dial up internet access). If the phone line is not connected to it, the PC stays off. (Note the PC isn't dialling out - at least i don't think it is). I guess the easy answer is just to remember to unplug the phone line
View 6 Replies View RelatedI'm creating a .bat to run a backup job and it keeps failing. The event log says that no media was specified. The job works fine if I load it to the GUI. The 4mm DAT drive is specified in the GUI but that doesn't seem to carry over to the command line. In the end all I want is a full C: backup and the system state, overwriting whatever tape is in the drive. This is the command from the .bat
ntbackup backup "@c:ackupserver.bks" /m normal /v:yes
I have a bootable cd that contains a backup of my system state. It boots to a dos command prompt. I cannot find info on how to restore this should I need to in the future. Also, I wished to create a ERD but I have no floppy drive. Info I have found tells me to use regedt.32 (or regedit) but info on how to create, store, restore this is confusing (involves either a long bat file or refers to how to restore from within? a domain). All I wish to do is to have the cd equivilent of the ERD floppy that I can insert when asked to do so from the W2K cd. If this is not possible, I would like to know how to accomplish this using another method.
View 2 Replies View RelatedI am about to purchase a laptop and if there is anything I've learned over the years, it's that these companies like to cram laptops with useless software, most of which expires after a certain amount of time thus making it even more useless. What I would like to do after purchasing the laptop is completely format the hard drive and then install my own copy of Windows along with software that I do use. If anything ever goes wrong however, the originally installed version of Windows along with the manufacturer's software / utilities will most likely be needed for warranty. So my question is about how to make a perfect copy of the hard drive before formatting it. I have Partition Magic which has an option called "Copy Partition" which I imagine is what I am looking for, but I would like to make sure I don't do anything wrong.
Would I install Partition Magic, make a hidden partition that is large enough for the currently installed version of Windows and the extra "bundled" software, and then copy Windows and the software to it? After which I would then format the rest of the hard drive and then install my own version of Windows there. If anything ever goes wrong, I would format the partition I was working with and copy the hidden partition back to it. Is this the correct thing to do, and if so is there anything else I should be aware of before doing this. For example, will the original version of windows still function correctly if I ever did have to restore it? I always hear about people doing this and I assume this is what they do.
I recently tried reformatting my hard disk and reinstalling windows to do a "clean-up" and start anew. Upon reinstalling Windows, I tried to download and install SP2.
Once SP2 is installed, the first time this happened I received an error message that said "SP2 Instlalation failed - Systme is in a fragile state please go to Control Panel and uninstall" After that I tried reinstalling the service pack. After this, I received the blue screen of death after bootup, with a big message that I couldn't read (It was distorted by the monitor and only on screen for a little bit).
I would like to restore my old computer to its original state, but can't figure out how. Gateway won't help me because it is out of warranty. I have both the original DVDs I made when I bought it as well as the Recovery drive it came with. I can't figure out how to use either one. I thought the DVDs would boot from the first one and go from there, but they don't. Can anyone walk me through this using either medium?If it makes a difference, it is Windows XP home media center and a Gateway GT5220.
View 1 Replies View Relatedthe S3 sleep state to work on the Tyan Thunder K8N motherboard running WindowsXP Pro x64? When I check my sytem from within Windows, it only says it supports S1 and S4 sleep states... I have the most recent motherboard bios and all other 64-bit updates installed... but for whatever reason, no utility, test programs or even Windows itself sees that this motherboard supports the S3 sleep state.It's a logo'd desktop motherboard, so it is supposed to support S3, but I can't for the life of me get WinXP Pro x64 to recognize that it does.
View 1 Replies View RelatedI had a virus a few weeks ago that cheese helped me with. However, now whenever I start up, I get a problem. windows classifies it as a serious problem. Here are the error messages.Also, when the computer stands by, when you wake it up, it reboots instead of just returning to its state before it went to sleep. Any ideas why? here are the errors
View 4 Replies View RelatedI'm having problem connecting to my wireless network.I can connect via an ethernet connection but when I go to the ipconfig command from the CMD prompt I receive the following message:Ethernet adapter wireless network connection2:Media State Media State Disconnected.If I check the wireless card's status under the Control Panel System the device is "enabled and functioning properly"I've checked the setting against the other PC's I have on my network and the settings are corrct.When I try to repair the newtork I receive a messagethat the repair can't be completed.I keep getting a pop up from windows that the wireless network is unavailable.,Obviously, I need some help finding a fix.
View 21 Replies View RelatedI have recently restored my PC to it's original state as bought from the shop using the Recovery Disk supplied leaving just the Operating System.A friend wants to do the same but has no Recovery Disk. His PC was built by an independent.
Is there a way of creating a recovery disk to do this or is there site to download the relevant info/software.
I am preparing my computer for doing a full pc recovery process. I have had viruses and spyware in the past and still continuing windows errors. I want to wipe my hard drive and recover my pc back to factory HP state. I do not have any recovery discs for it. The recovery disc creator does not work and my laptop has been discontinued and they don't offer any support for it. So I will be using the recovery console partition HP has put on the computer. All of my important data is backed up to an external hard drive. Is this risky at all? Could the process error at all? I don't know if the partition could have been tampered with from all the malware and cleanups I have done to the computer. I am a little worried if something happens,
View 1 Replies View RelatedI am sole installer and user of my XP Home SP2 machine. I have Administrator rights; (I checked to make sure in Safe Mode as the actual default Admin).In trying to backup my System State, it "fails" 75% into it saying I don't have permission on certain sensitive files and that restore will fail.
View 4 Replies View Relatedhi i'm very untechy, i am getting an rpc server error and cannot figure out how to fix it. it keeps rebooting my system. so it's in a continual state of shutdown and reboot. RPC Server Unavailable, hres: 0x800706BA Register Class Objects Fail when i try to do anything it shuts down before i can complete it.. and i try to type command, but i have to go through ctrl/alt/delete to get to the run function because the taskbar isn't there?
View 7 Replies View RelatedI'll try to make it short. I'm using WinXP ver2002 SP2 and I've justreformatted my drive D through run cmd (I'll just call it that cuz I don'tknow what it is.... )for various reasons(long story), and after t's reformatted, I opened drive D. Good, nice and clean. But something'sa bit different. There's a music symbol on the lower right hand corner of theexplorer window, just like "my music" has the symbol and "my pictures" has apicture symbol which shows it's a "picture type folder" or "music type folder".I know this can be changed in folder properties, and helps the folder to perform different functions from the options on the left. But this is a drive
View 6 Replies View RelatedI reformatted, reinstalled, loaded all the drivers, and getting updates now, but when I typed the address for microsoft.com, the keystrokes were lagging.
View 11 Replies View RelatedI attempted to download XP HOme Edition to a fresh hard drive that was reformatted.
It appears to get to a certain point and this message appears:
IRQL_NOT_LESS_OR_EQUAL
STOP: 0X0000000A (0XFFFFFFF0, 0X00000002, 0x00000001, 0x80879641)
then, it says something about newly installed Hardware or software, (which there is only the XP I am trying to setup that is new) and then it says to disable BIOS memory options such as caching or shadowing, which I went ahead and did after reading this, but to no avail.
Just re-installed WinXP Home on my PC. I tried to go to Windows Update, but when it scanned my machine to see what updates it needed, it said it could not continue. I went to Tools/Internet Options/Security, and set it to default, figuring that would make everything acceptable for Microsoft. I restarted the computer and tried to do it again with the same result. The error message is 0x8007000B.
View 7 Replies View Relatedi just reformatted my laptop and after reinstalling most everything, theres a few bugs that i don't know how to deal with.windows XP home edition, dell latitude d505, sorry, not sure what other information is relevant
1. when i start up my computer, it goes to this loading screen where everything is black except for a line of gray rectangles near the bottom which represents the status bar (looks like the screen when coming out of hibernate but no words). this loading part takes like 5 minutes to complete, and it hasn't ever done that before. i have no idea why its taking so long to start up.
2. you know the power icon that switches from the plug to the battery depending on whether you are on AC power or battery power? that icon doesn't switch to the battery when i unplug it, so i have no way to know how much of my battery is used up. when i go to 'adjust power properties', it only displays settings for AC power, not battery power. i thought this was some issue with dell quickset but i'm not sure how to fix it.
3. probably too obscure to get an answer on.. i use a wireless mouse that plugs into my USB port. its a Kensington Optical Wireless Pro Pocket Mouse. the first time i plugged it in after reformatting, the "found new hardware" thing popped up and started to install whatever it needed. but then it said that there was a cyclic redundnacy error (?) and that it couldn't finish installing and that the device might not work properly (which it doesn't).
After a major problem with a virus i reformatted my hard drive.since my pc was "preloaded" with windows i didnt have a backup disk, so i borrowed one.i have reinstalled windows xp pro but i am unable to download/ install service pack 1 as microsoft inform me that the product key i used was invalid.
View 8 Replies View RelatedYa know that little window that pops up while something is downloading? Someone checked the box and now that window disappears. I really would prefer for it to ask me. Because sometimes I like to open it right away. How can I change that back? It disappears to quick for me to uncheck that box.
View 5 Replies View RelatedAs most know,I work at a pawn shop cleaning up bought computers, or those that were lost in pawn, for resale. One of the many things that I do, since I can't reinstall but rather have to work with what comes on the machine, is eliminate all accounts but one administrators account which I typically name "owner." To keep these machines safe from mischievious children and other would-be "messer-upers" on the sales floor, I password protect the screen saver. This also provides an opportunity for the salesperson to get involved. Anyway, when the password window opens, it still has the former owners name�the registerer�in that window. Isn't there a line in the registry listing that name? Can this be edited in the registry.
View 8 Replies View RelatedI had the XP Security Center virus and, perhaps foolishly, reformatted - or more formally, "system reformat" for "returning the computer to factory conditions", as my friend who helped me with this process called it - my computer and reinstalled the operating system. But when I turned it on for the first time, there was, naturally, no internet connection. However, while I would normally proceed to set one up, there was, for some reason, no "View Available Wireless Networks" option when I right click on the little connection icon at the bottom right hand corner of the screen.
I recently had to reformat my PC and now I need to reinstall my video card and sound card drivers. The only problem is, I don't have the driver CD anymore. when I try to find out what my video/sound cards are I draw a blank because they don't seem to be displayed anywhere (display properties/settings/advanced/adapter). All adapter type and adapter information are all I know my video card is ATI but that's all I know and as for the sound card - I haven't a clue what make that is. I've been on the ATI website but there are so many drivers I don't know which one to download/install.
View 7 Replies View RelatedI recently reformated xp computer with xp 2002 disk all went well until i got to the activation of windows I activated windows and clicked ok then as i got to the logg on screen the error popped up again i repeated what i did the first time and sure enough it worked but when i clicked finish it returned to the logg in i tried once again to logg on and it came the same error but this time it told me windows is already activated and the only way to access windows is via safe mode which dont allow u to activate windows.
View 3 Replies View RelatedWhenever i start up my dell 4600 I get the following:SATA Primary drive 0 not found
SATA Secondary drive 0 not found initializing Intel(R) Boot Agent Version 4.1.06
PXE 2.1 Build 083 (WfM 2.0), RPL V2.74 Strike the F1 key to continue, F2 to run the setup utility i just reformatted the HDD the other day and have been getting this message
I just reformatted a computer running XP. It came with the resource CD from the manufacturer, not the actual XP CD. My problem is drivers. Everything in the machine is very 'non-descript' and I am still needing drivers, but they were not included on the cd that I got from the seller. In the device manager, I have yellow questions marks beside the following:Ethernet controller
Multimedia Audio Controller SM Bus Controller Video Controller (VGA Compatible)
I tried to get the exact name/brand of the ethernet card, but it's a 'PulseJack' and I have never seen one of those before