After a major problem with a virus i reformatted my hard drive.since my pc was "preloaded" with windows i didnt have a backup disk, so i borrowed one.i have reinstalled windows xp pro but i am unable to download/ install service pack 1 as microsoft inform me that the product key i used was invalid.
IDE drive; SATA drive; misc USB drives and card readers p4 (2G) Foxcon board (w/ SATA support); 2G Ram...
Software:
XP Pro SP2; Partition Magic 8; (& misc apps)
I bit the bullet and reformatted my hard drive after problems with a corrupted W98 partition. (My testimonial to XP is that w/ W98 I did this sometimes twice a year or more; I've run XP without having to re-format for over two years.)
I reformatted the hard drive and tried to install XP home Edition for my Latitude D600, but keep getting different error messages, I thought it was a faulty operating system disk, but I've tried three different disks.This is not the first time I've reformatted desktops and laptops.
I'll try to make it short. I'm using WinXP ver2002 SP2 and I've justreformatted my drive D through run cmd (I'll just call it that cuz I don'tknow what it is.... )for various reasons(long story), and after t's reformatted, I opened drive D. Good, nice and clean. But something'sa bit different. There's a music symbol on the lower right hand corner of theexplorer window, just like "my music" has the symbol and "my pictures" has apicture symbol which shows it's a "picture type folder" or "music type folder".I know this can be changed in folder properties, and helps the folder to perform different functions from the options on the left. But this is a drive
i reformatted my windows partition to try and solve a constant crash problem.my hd is divided up into 2 partitions with the second being where i stored all my data and mp3's.I only formatted the windows partition and now my second partition is inaccessable.The drive letter has also changed from k to d..i tried changing the drive letter back to k and the partition was still inacessable.Any help would be awsome on this.I would hate to lose 100+ gigs of data
D: is not acessable the file or directory is corrupted and unreadable
Reformatted my hard drive, Drive C and reinstalled Windows XP Professional SP3 and all the drivers. The drive is 120 GB. I have a Dell 8300, now all of a sudden when I click on Drive C it shows that I only have 24% unused space on my hard drive. It has been defragged and I know it shouldn't be showing that full.
I am running an 2.2gh Athlon 64 with Media Center 2005 and a gig of Ram and an integrated 200x Raedon mobo. The system idle process is at 99-80 percent most of the time. However, at the bottom it says I'm running around 75-100% and when I go to the graph it shows really high as well. I just reformatted my enitre drive via recovery disc to try to fix this. (Also and i didnt want to try to uninstall the beta 2 of vista so it wasnt for the sole purpose of fixing the percent thing) I dont have a duel boot anymore and it has ran this way since the start AND since the reformat. Too bad i didnt notice this when i bought it.
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
My laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
using XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
i have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP . well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
I had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
I recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
I can not access hard disk properties because Windows Explorer hangs whenever I Right click on a hard drive icon. I am running WXP pro SP2 completely up to date with updates.
A problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
I am facing two problems with my lap top hp campac presario 2100. 1.The loptops battery to be changed. I dont know how many batteries are there. Any cmos battery there like any other pc. Pl advice. What would be the cost. and the model number . The hard disk requires replacement. I want to know the model numberor exact type of hard disk would be fit in. and the cost thereof.3. Windows xp home edition has been preloaded in the laptop. How to take a copy of the os and copy in the new hard disk. I have the serial number etc for the OS.
When installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
I use Cobian Backup to produce a zip-file containing all files and folders, except for temporary-folders (I added an exclude-filter), of my system.Before I can rely on this method, I need to find a way of restoring the 27 gb zip-file, which I store on a networked drive, easily. how booting up a laptop with a formatted harddrive, be able to access a network-drive and extract all the contents of the networked zip-file to the hard drive?
A little over a year ago I purchased a used IBM Thinkpad laptop from ebay for my wife. It came with Windows 2000 Professional installed and everything worked fine. No CDs or floppies came with the computer. A couple of months later, it was stolen by one of her business associates. It eventually was recovered, but the thief had installed Windows XP along with the OS that was already installed. In trying to remove XP and return the machine to its original state, I somehow managed to eventually not be able to use either OS. As it stands now I have no OS and cannot even access my hard drive.When I boot from a floppy then try to change to C: drive, I get the error message: Invalid media type reading drive c: Abort, Retry, Fail?
A friend gave me a laptop, my problem is that it came from Japan thus everything is japanase thus I can't hardly use it. The reason I accept it is bcoz he said I can try to reinstall a win xp with english version (btw, the OS is win xp pro in japanase version). Thus I bought win xp pro sp2 and try to reinstall it, so I reboot fm cd rom and while the windows setup is starting, the system stopped and the message on my screen read as:A problem has been detected and windows has been shutdown to prevent damage to your computer.If this is the first time you've seen this error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer, resume any newly installed hard drives or hard drive controllers, check your hard drive to make sure it is porperly configured and terminated. Run CHKDSK/F to check hard drive corruption. then restart computer. how in the world I can follow the above steps if everything written on it are in japanase language? I also try to visit the manufacture's website, thinking that perhaps it help solve the problem but....i also need a japanase translator to understand it.
I had to reinstall XP because of spyware issues. I saved important data on my slave drive. I reinstalled XP. Now the bios, device manager, and disk manager recognizes the slave drive but didn't assign it a drive letter. In disk manager it shows as a basic disk, NTFS, Healthy (Active), 18.65 GB,Online. When I right click the volume to assign a drive letter it is grayed out.
i screwed up my registry, and of all things it was the keyboard driver or something, so theres no hope of fixing it on my computer. ive got the drive hooked up as the slave on a different computer, but i cant figure out how to edit the registry on my drive rather than the primary drive. is there any editors that will open it from a file? any way of decompiling it? theres got to be some way to edit it. also, they are both xp.
I have just bought and installed (to the point of completing initialization under Disk Management) a new 1 TB hard drive. Originally, I was planning to use it solely for data storage.However, I am thinking of installing Windows XP Pro and all the programs I currently use on it, thereby making it the new OS and programs drive, while using the original 120 GB HD as a data/backup drive.I think the main appeal of doing this, for me, is that it also presents an opportunity to reinstall Windows on a machine which hasn't had this done for more than three years, and which currently seems to take at least five minutes to boot to a "usable" state, despite having a reasonably high spec for its age (it was bought in 2001, but as a result of the upgrade
I have 69.1 memory free from 74.5 and i noticed no matter how much i delete i cant get up into the 70s.For example this month i have deleted a ton of music files that came up to about 400mb,Then a few programs that were around 50mb each and still nothing .If anything it seems i am going down in memory instead of gaining from deleting these programs.
I've connected an external USB drive, but when I go to My Computer it shows it as a network drive. In addition, it gives it the same name as the mapped network drive that already exists there. When I change the name of the external drive there, it then changes the name of the mapped network drive, so again they both have the same name, although the drive letters are different. Any ideas how to make the external drive appear where it belongs in My Computer, under Hard Disk drives?
I turned the PC off to reboot when I though I was going into safe mode and went into regular mode instead. Now, it thinks one of my external drives is the C drive. On boot, I am getting a message that it cannot recognize find the system 32 windows config file (I'm paraphrasing).
I used the repair utility to get to the C prompt (which is pointed at the external drive) and checked the drive letters. I don't think the PC bios knows the hard drive is there.
I tried going into setup and reverting to factory installed configuration and that didn't change anything. I could not get it to recognize the hard drive.