Hardware:
IDE drive; SATA drive; misc USB drives and card readers p4 (2G) Foxcon board (w/ SATA support); 2G Ram...
Software:
XP Pro SP2; Partition Magic 8; (& misc apps)
I bit the bullet and reformatted my hard drive after problems with a corrupted W98 partition. (My testimonial to XP is that w/ W98 I did this sometimes twice a year or more; I've run XP without having to re-format for over two years.)
Correct me if I'm wrong but I was under the impression that hard drive letters were assigned each time the machine booted up & only c & d were reserved for the operating system & CD/DVD drive & if the number of drives altered from one boot up to the next these letters could change. The reason hat I ask is that I changed an internal drive which had several partitions on it only to find that this drive isn't recognized, but even though it isn't recognized by My Computer or disk management the other partition are labeled as if this were listed.I now don't have a an 'e' & 'g' drive listed. But I do have a 'J' & 'k' listed. Where is my other drive 'e' & 'g' & how do I get to use the data on them.
View 6 Replies View RelatedI have no idea why but I have an issue where my brother's computer after a clean install of XP from 98 exchanged ID letters. Drive "C" is now "F" and the Zip drive is now "C". It may have been something to do with SP2 which I removed. Windows won't allow me to change the hard drive back to "C" even after I made it available by designating the Zip as "H". Trying in Safe mode did not allow the change, nor did Partition Magic change it. "C" was added to the name but I could not change it from "F". I already started over and reinstalled XP but it still came up "F" as the hard drive. Things work after the second install where the drives quit after the first half-way into re-loading programs. Now it is just a pathway issue. What else can I do short of starting all over? Is there a way to change the hard drive designation? Any help would be appreciated
View 4 Replies View RelatedI just bought a WD 1 TB to replace 120 GB slave (it was 'c:') I had. I intended to still use it as a slave and keep my 320 GB (it was 'd:') as the master. They're both SATA's so of course that doesn't matter so I just kept the 320 set as the primary in BIOS.At first boot up the computer started fine but when it started Windows the previous devices hadn't been loaded and I was asked to register again before starting. I re-registered and clearly all the previous settings are gone
View 2 Replies View RelatedCan you reassign a drive letters to a second hard drive, cd/dvd drive? I seem to remember something about that in XP but can not recall what it was I read.
View 7 Replies View RelatedAfter a major problem with a virus i reformatted my hard drive.since my pc was "preloaded" with windows i didnt have a backup disk, so i borrowed one.i have reinstalled windows xp pro but i am unable to download/ install service pack 1 as microsoft inform me that the product key i used was invalid.
View 8 Replies View RelatedI reformatted the hard drive and tried to install XP home Edition for my Latitude D600, but keep getting different error messages, I thought it was a faulty operating system disk, but I've tried three different disks.This is not the first time I've reformatted desktops and laptops.
View 1 Replies View RelatedSo I just ran into a problem with my External Western Digital Hard Drive. Previously, my drive was mapped as the E Drive (I believe) and after taking it down and setting it up again (when i moved back to college), my external hard drive switched drive names on me. This really sucks, as my external drive stores all of my iTunes music and now when i run iTunes, it tries to find the music from the E Drive location and not the G Drive location. Is there an easy way I can change the letter drives so that I don't have to reimport all of my music?
View 1 Replies View RelatedI just built myself a brand new PC last week. Two times now, I've woken up and had this message on the screen from AVG Free Edition: "Something bad has happened to the application...". I click ok, and go about my business, but nothing works. I open My Computer, and it comes up, but sits there with its little search light forever. It seems as though my hard drive has stopped, but things left in memory continue to work. Some things open (like things I used the day before), some dont. The things that open don't really work, they just open and sit there. I hit the reset button on the case and everything works when the PC boots back up. This is Windows XP Pro. I DO have the option of Stopping both of my hard drives, the same as you'd stop a USB flash drive, etc. I've never run SATA before, so I assume it has to do with that? I do not have it set to stop my hard drives in the power options.
View 11 Replies View Relatedmy friend told me to take a looka t his computer and wheneverhe turns on his computer, this is what he gets.
View 4 Replies View RelatedJust recently my computer started doing the annoying thing where you try to type, but it freezes for a couple of seconds and then all the typing you did finally shows up. It does it when I try to scroll down a page, too; everything freezes for a few seconds before my cursor is responsive again. I have a fairly high-powered computer, and no extraneous programs are running. When I keep Task Manager running, I can see spikey activity in the CPU when these freeze-ups occur. I keep things well-defragged and spyware-free.
View 14 Replies View RelatedAfter reformating my pc, my secondary hard drive is now designated as drive "D". Before the reformat it was drive "G". I have software that needs to get data from drive "G" but the drive is not designated as "G" any longer. I can't remember how to reassign the drive letters so that I can designate the secondary drive as "G".
View 2 Replies View RelatedAt work we have so many network drives and in a recent upgrade to xp, the drive letters are showing up at the very end of the drive description. In certain applications, you only get to see a short portion of the beginning of the drive info and with the complex naming schemes we have, it is difficult to remember what's what and hard to tell the difference with just the beginning showing. It's very easy to remember what we've designated as K or N or P for example. Any way to switch these letters back to the beginning?
View 5 Replies View RelatedI'll try to make it short. I'm using WinXP ver2002 SP2 and I've justreformatted my drive D through run cmd (I'll just call it that cuz I don'tknow what it is.... )for various reasons(long story), and after t's reformatted, I opened drive D. Good, nice and clean. But something'sa bit different. There's a music symbol on the lower right hand corner of theexplorer window, just like "my music" has the symbol and "my pictures" has apicture symbol which shows it's a "picture type folder" or "music type folder".I know this can be changed in folder properties, and helps the folder to perform different functions from the options on the left. But this is a drive
View 6 Replies View RelatedI have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies View Relatedi reformatted my windows partition to try and solve a constant crash problem.my hd is divided up into 2 partitions with the second being where i stored all my data and mp3's.I only formatted the windows partition and now my second partition is inaccessable.The drive letter has also changed from k to d..i tried changing the drive letter back to k and the partition was still inacessable.Any help would be awsome on this.I would hate to lose 100+ gigs of data
D: is not acessable
the file or directory is corrupted and unreadable
Reformatted my hard drive, Drive C and reinstalled Windows XP Professional SP3 and all the drivers. The drive is 120 GB. I have a Dell 8300, now all of a sudden when I click on Drive C it shows that I only have 24% unused space on my hard drive. It has been defragged and I know it shouldn't be showing that full.
View 6 Replies View RelatedI am running an 2.2gh Athlon 64 with Media Center 2005 and a gig of Ram and an integrated 200x Raedon mobo. The system idle process is at 99-80 percent most of the time. However, at the bottom it says I'm running around 75-100% and when I go to the graph it shows really high as well. I just reformatted my enitre drive via recovery disc to try to fix this. (Also and i didnt want to try to uninstall the beta 2 of vista so it wasnt for the sole purpose of fixing the percent thing) I dont have a duel boot anymore and it has ran this way since the start AND since the reformat. Too bad i didnt notice this when i bought it.
View 14 Replies View RelatedMy laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
View 2 Replies View Relatedusing XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
View 3 Replies View Relatedi have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP .
well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
I'm trying to play Diablo II: LoD, which requires that the LoD expansion CD be in my CDROM drive. I mounted an image of the disc with Daemon such that it's in (virtual) Drive E: (normal CDROM drive is D:[b][/b]). But the game seems to only be checking my D: Drive for the disc, and it won't let me point to the E: Drive.
Is there a way to just switch the drive letters around, and if so, do you think this would even solve my problem? Perhaps there's a way I can just set E: as my default CDROM drive, so that the game would check there?
I recently had to reinstall windows XP to get rid of spyware. When I restarted windows, I noticed that my drive letters were not right. For instance,my hard drive is letter (H) instead of C. My floppy drive is correct (A). How do I change the letter back to C for my hard drive?
View 6 Replies View RelatedI created a new partition and installed Windows on it a while back, but when I booted up, it had the letter G and my other partition that I used to store music was drive C.I was going to change drive letters around so that my OS was on drive C, but I was wandering if this would mess up any applications I have on the system?
View 4 Replies View Relatedi feel that this is probley simple... but I don't know how to do it. I've right clicked directly on the dvd-player to see if I could change it and nothing is there. My dad has a dvd-player F: and a cd-rom drive E:, His computer was formatted recently, but now the software for each of the drives are mixed up. Putting a dvd in drive F:, tells us that drive E: does not contain a disk.I would like to just change the drive letters back to how it wants to be set-up.
View 1 Replies View RelatedAfter a reconfiguration of boot loader in suse Linux two of my drives swapped their drive letters in WINDOWS XP SP2 (weird) now i can not reassign the drive letters as the disk management utility in control panel fails to start and gives error " service execution failed".so can u suggest any third party windows based software for achieving the task i have searched the internet and found nothing
View 4 Replies View RelatedMy main pair of raid drives crashed and burned. So I installed XP on my second pair of raided disks and recovered the data from the first pair. But now my boot/o-s disk is D and my drive is C.Any tools I can use to change drive letters around and move boot information and such automatically?
View 9 Replies View RelatedMy CD rom is showing up as Drive D: and my second drive partition is showing up as Drive E:. I want to switch them so the CD rom is always the last drive letter.
View 8 Replies View RelatedI have 2 USB hard drives which i use for storage. I have a backup program which automatically backs up my mp3s and digital camera pictures.When i plug in the USB hard drives they show up as C (80Gb HD) and D problem is that if my digital camera is plugged into my USB port before any of the USB hard drives are plugged in, the digital camera then takes up Drive Letter 'C'. Then if i plug my USB Hard Drives in they now become D and E. See my problem ?? The backup program no longer recognises that the USB hard drives have moved up a letter and so won't back up until i restart with only the USB hard drives in tomake them C and D again. So my question is, how do i force WinXP to make sure that my 80Gb HD is the only thing to ever be allocated 'C', and my 160Gb HD is the only thing to ever be allocated the letter 'D' ?. i.e. I want to make WinXP automatically recognize which HD i am plugging in and always allocate it the Drive Letteri want?
View 8 Replies View RelatedI've got the following drive letter configuration on my PC . C to G, local drives H to K, network drives (essentially data on a server)I've now got a PDA that connects to my PC via USB. However, when connected it seems to go for the next consecutive local drive letter (ie H) - even though H is already allocated to a network drive.Is there a way I can allocate a permanent drive letter to the PDA (eg L)even though the PDA isn't always connected and may be connected/disconnected whilst the PC is running.
View 1 Replies View Related