Wireless Network Media State Disconnected
Dec 15, 2005
I'm having problem connecting to my wireless network.I can connect via an ethernet connection but when I go to the ipconfig command from the CMD prompt I receive the following message:Ethernet adapter wireless network connection2:Media State Media State Disconnected.If I check the wireless card's status under the Control Panel System the device is "enabled and functioning properly"I've checked the setting against the other PC's I have on my network and the settings are corrct.When I try to repair the newtork I receive a messagethat the repair can't be completed.I keep getting a pop up from windows that the wireless network is unavailable.,Obviously, I need some help finding a fix.
View 21 Replies
ADVERTISEMENT
Apr 17, 2007
The Network Setup Wizard tells me that it found disconnected network hardware. My Broadcom 802.11g Network Adapter wireless connection is apparently disconnected. Any ideas on how to rectify this?
View 2 Replies
View Related
Aug 7, 2008
let me start by saying I have had a horrible time with wireless networks for my PC. I have a PC downstairs and a PC upstairs (they are about 10 feet apart through the floor). The PC downstairs is connected to the router/modem. I recently bought a new gateway adapter (Realtek RTL8185). I installed it and everything was fine. Now my problem is every 2 minutes it disconnects, but then reconnects right back (this is bad news for online gaming). The speed is okay, but I have tried reinstalling and everything. It works fine after a restart, but then it starts to disconnect/reconnect, and then just stop all together.
View 4 Replies
View Related
Jun 19, 2005
Any idea what causes mapped network drives to appear as 'Disconnected.Network Drive' in 'my computer?' This happens even when a system is powered up with the networked system already online (supposed to reconnect on startup).Double-clicking the drive letter in 'my computer' accesses the drive and changes status to 'Network Drive.' Unfortunately, accessing by another app gets the 'disconnected' status.There must be a registry patch or option for this
View 3 Replies
View Related
Feb 13, 2008
I have 3 drives mapped on a WinXP Media Center Edition machine, which always show up as Disconnected Network Drive with every boot. I can access them if i double click them, and then they are marked as connected.This is a problem, however, because when i load up Media Center, I have these 3 drives mapped under My Video, and they won't display. What I am doing now, is remoting into the system every time I boot it, opening each mapped drive, and then launching Media Center. But, this is a pain in the ***, because I jsut want to boot up and go with the remote control.
View 1 Replies
View Related
Sep 18, 2005
My connection signal strength keeps going "low" when its usually high. I have disabled the router access thing in administrative tools. But this hasnt solved my problem. I keep getting disconnected.
View 9 Replies
View Related
Mar 29, 2009
I took my daughters Gateway M320 laptop and did a restore from the CDs that came with the laptop. After doing all the Microsoft Updates, ALL the wireless driver installs from Gateway there is no 'Wireless Network Connection' icon. I have also checked Device Manager and there is no wireless adapter. Before this exercise she was running wireless fine. It does work 'hard wired' but no wireless icon.
View 16 Replies
View Related
Jan 25, 2005
Does anyone happen to know how to successfully create a network in Windows XP Pro for a wireless laptop and for an Ethernet-hooked-up (non-wireless) computer. I'm trying to printer and file share the two together BUT I've exhausted myself in trying to make it happen. Has anyone successfully done this? Am I missing something? Perhaps hardware?I would truly appreciate any help or advice.
View 14 Replies
View Related
Sep 27, 2009
Have a dell xps m140, running win xp pro service pack 3. Based on your knowledge of windows xp system files and there function, i was wondering if you would know appropriate files that will need to copy. The scenario is a s follows
Got infect by a virus, virus was removed by Kaspersky. After virus removal both the 10/100 NIC and the wireless adapter, and the bluetooth have indicated that they are disconnected. However from device manager they show up as working properly, which they are not as I cannot connect to the internet and there is a red X on all three icons in the system tray. I am wondering if a system file related to network connectivity was afftected and subsequently deleted by kaspersky
View 10 Replies
View Related
Dec 25, 2006
we're trying to do a wireless network with desktop. We've got the wireless part working, we can get to the internet from the laptop. But I can't figure out why it's not seeing the "workgroup" and the shared folders that we shared on the desktop. I turned on my own laptop and the shared folders just popped up without even trying, but on my mom's laptop, I can't see the workgroup at all. I had the printer installed at one time and it worked. But then I changed the name of the desktop computer, and then I deleted that printer and tried to re-do it, but it won't even see that there's anything under the workgroup. And then sometimes it won't even see that there IS a workgroup.
View 2 Replies
View Related
Sep 10, 2006
I was randomly cut off my wireless network.. Thought it could be a temporary problem so just slept it off, woke up again this morning and I've not been able to connect my laptop to the wireless network. I've even come down to the host computer and placed my laptop next to it, to see if the signal was any better.. and it is just non existant. I click on "wireless network connection" and refresh network list and it just "no wireless networks were found in range" and whenever I click refresh network list it just comes up with the same message straight away.. Not allowing it to search. I'm so worried it might be something to do with my laptop because I am going to uni next week, so NEED wireless when I am there.
View 4 Replies
View Related
Jul 6, 2005
I am trying to set up a home network. However after installing a Belkin F5D7000 Wireless Desktop Network Card I get the following error: PCI Simple Communications Controller Error.. Search For Drivers. I have the installation disk and I have tried manually pointing the Hardware Wizard to the file, but it will still not pick up the drivers. I have the latest drivers from Belkin - no joy.This is the second card I have tried and after installing into another computer it worked fine. However the machine I am trying to install onto is older. Pentium III 450 on a B7XAN Motherboard. O/S Windows xp pro.
View 3 Replies
View Related
Aug 18, 2009
I have two computers wireless connected. What I now want to do it set up a password so hacking into the system by outsiders is as difficult as possible. I think we are talking "network key" or "Wired equivalency Privacy Key". I know nothing about setting up a wireless connection so don't want to risk disturbing the existing set up which works fine; I just want to add password access.One computer has Windows XP Home and the other Vista Home Premium. Can anyone give me some not too technical advice that will help me do this please?
View 14 Replies
View Related
Nov 30, 2007
I've got a wireless network setup in my apartment. One desktop, hardwired to a wireless router and hardwired to a printer. Two laptops, both connected to the wireless network for internet and printing. It has been working fine for over a year now. No glitches. But about a week ago, one laptop stopped being able to print. It is still connected to the network for internet, but it won't print. The other laptop is printing fine, so it shouldn't be a network problem. The desktop is printing fine too. I've tried disabling the firewall on both the laptop and the desktop. Nothing. When I try to print from Firefox, I get the following message: Printing failed when starting the document. When I try to print from Word, I get: Windows cannot print due to a problem with the current printer setup. Try one of the following: Check the printer by printing a test page from windows. Make sure the printer is turned on and online. Reinstall the printer driver. When I try to print from Notepad, I get: The RPC server is unavailable. And finally, when I go to "Printers and Faxes" in the Control Panel, right click on the printer and choose "Sharing", I get: Printer properties cannot be displayed. The print spooler service is not running.
View 14 Replies
View Related
Oct 24, 2003
I'm running XP Pro and have installed wireless cards in my PC and laptop. They seem to be communicating with excellent signal strength. I've run the network setup wizard on each machine and setup a home network called 'Mshome'. I've restarted both machines. In My network places, there is a network called Mshome. When I try to view workgroup computers, the only machine listed is the one I'm currently using - I can't access the other one.
View 29 Replies
View Related
May 11, 2007
Unable to shut off wireless network, light stays on, I have XP system on a HP Pavilion ze5500 laptop.The switch is on the front of the laptop, unable to shut it off and when I boot up I get a popup that says (wireless network is not connected) this popup stays on the screen untill I delete it.
View 6 Replies
View Related
Aug 17, 2005
I have a built in wireless card in my Dell D610 laptop. Every time my computer wakes up it gives me a notice that it has detected a wireless network somewhere (even if it is secured or is very weak. This is annoying.
Can someone tell me how to stop this, or at least cause the notice to disappear after 1 second, rather than after about 20 seconds?
View 4 Replies
View Related
Oct 5, 2008
XP has stopped connecting to my wireless connecter "Wireless Network Connection Not Connected" Device manager says everything is normal, and I can identify other local wireless networks. XP recognizes that the connector is there, but it won't hook up. I have disabled and reenabled the wireless connector and reloaded all of the Broadcom software. I tried to do an XP repair, but I am using SP3. The slipstream recovery disc that I made is asking for a password to get into XP, but there isn't any. I've verified this with three different password cracking programs. Everything else is working; I am on an Ethernet connection now.
how to force XP to connect or know what drivers I need to reload that are used to connect to the wireless connector besides the Broadcom's that I have already reloaded? I really don't want to do a complete XP reinstall.
View 11 Replies
View Related
Aug 28, 2006
I had a problem trying to connect my Canon Pixma 4000 so that I could access it wireless via our home LAN. I have one laptop(the wife's) attached directly to the router (cable service from Optimum). My laptop is used wirelessly from another part of the home. All was working well, except I could never get the printer to work so that I could use it wirelessly, so I had it plugged in directly to my laptop. Up to this point, it was all ok. I have AVG and ZoneAlarm running on both computers. A friend, (really) was at my home and volunteered to connect the printer so that it would work wirelessly. He is a UNIX administrator, manages a number of pc's too. I thought, "this is great, my own administrator".
To shorten the story, he removed ZA, the computer will not work wirelessly, only works when connected directly to the modem and the printer doesn't work wireless. I called ZA, and they guided me through removing all the "orphans" that were left behind, so that cleared up a problem whereas I could connect to the net, but couldn't get to another url. I did not re-install ZA yet, because I don't want to add anything else into the mix. I will post a HJT log if that is what is needed. I DO NOT care if the printer works wirelessly. I will live with it connected to the back of my computer, BUT, I do want my laptop to work wirelessly so that both me and my Frau can be on-line at the same time. I have been through the IP address checking, all is ok there. If I try to connect via the SYSLINK wireless, I get nothing, even PING ing different sites gets no valid response. Regrettably, I have some tech knowledge, but not enough to figure out this one.
View 14 Replies
View Related
Sep 6, 2006
Is there any way to pull a wpa key for a wireless network out of windows? Can anyone tell me where the key might be stored if nothing else?
View 7 Replies
View Related
May 21, 2010
The Driver for a wireless network adapter mn-720 needed.
View 1 Replies
View Related
Jul 23, 2009
I reinstalled windows xp sp3 on a old laptop. Everything went fine except for internet connectivity. I have a wireless network to which I connect several computers and devices and everything works like it should.When I try to connect my laptop to this network, it fails.Every 5 seconds it goes from not connected to acquiring network address.I am sure that the key is correct, I am sure that my router is belkin router is wireless G and so is the Ralink RT2500 card. I am also sure that I have not white listed MAC addresses so my laptop won't connect. Basically I have done every simple thing that perhaps could be causing the problem.
View 7 Replies
View Related
Nov 21, 2005
Is there anyway to enable your wireless network connection and disable it with the starting & stopping of your web browser (IE 6.0), Win XP Pro, service pack 2. I like my wireless connection to be disabled when I am not surfing the web. Can I automate this task some how?
View 5 Replies
View Related
Mar 27, 2006
I can connect to the internet, but I don't know when I get kicked off. The display on my taskbar always shows it is disconnected. When you pull up the screen is says " non connected" but it actually is, then about 15 mins later it kicks me off and I have to re connect manually. This is very time consuming and is a pest. I have tried restoring my registry to an eariler point and have checked for spyware and virus.
View 5 Replies
View Related
May 8, 2010
I am using a Toshiba Satellite Pro 6100 Laptop running Windows XP.I restarted the laptop, and was prompted to either start Windows normally or start uing last know best configuration-I chose to start with last known best configuration.Now when I go to Network Connections, there is no Wireless Network Connection Icon. However, when I go to Device Manager, the card is present under Network Adapters(Toshiba Wireless LAN Mini PCI Card), and it states it is working properly.How do I get the icon back into Network Connections, so I can use my wireless again?
View 1 Replies
View Related
Jul 21, 2005
In the Wireless Network Connection Properties box under the Wireless Networks tab, there is a checkbox available for "Use Windows to configure my wireless network settings." In the past this box was checked and stayed checked all the time even if I rebooted, restarted, etc.. Starting a few days ago whenever I reboot, startup, etc. by default this box is now always unchecked and I have to go in and recheck it each time.What's making this box uncheck itself and how do I get it to stay checked again?
View 1 Replies
View Related
Sep 13, 2005
I got my computer fixed See thread I am having another slight problem. I don't think that this problem was necessarily caused because of the others issues I have recently fixed because I have had this issue in the passed but it just seemed to fix itself. I have a HP zd7000us laptop with wireless capabilities. However I the system does not even show any wireless network available. My desktop in my house has no problems going online with the wireless, neither does my psp for that matter. It's like the computer doesn't even know it's there. I went to the hardware wizard on my system and it says the wireless card is working properly but it will not see any available wireless networks.
View 2 Replies
View Related
Aug 25, 2005
I have found in Group Policy that there is a policy called Turn off Microsoft Peer-to-Peer Networking Services and is located under Computer Configuration Administrative TemplatesNetworkMicrosoft Peer-to-Peer. I have enabled this policy and applied to a test Windows XP SP2 machine. I have found that on this test machine I can still create a new ad hoc wireless network. how I can prevent users from creating ad hoc networks? Or why this policy is not working the way that i thought it would?
View 3 Replies
View Related
Oct 19, 2008
I now cannot access my wireless network in the house. I have a Linksys WRT54G router. The Int, WLAN & Ethernet lights are on. When I get into the home internet connections "details" on my HP, it states "acquiring IP address" and list all 0 (zeros.)
View 3 Replies
View Related
Jun 27, 2006
I have a home wireless Linksys network, with 3 computers. Its intended purpose was to allow all 3 computers to connect to the Internet via an 11.0 Mbps internet connection via cable TV, which has been successful. However, I have never learned how to have one computer send info to another within my little wireless home network, a feature I would like to have, but which I have never explored. I have recently been messing with shared folders, placing two of the three computers on the wireless network, but have found it elusive as to how to put info in a folder to allow it to be shared by the other computer. I am unsure as to whether I have properly put each computer on the network. (Yes, I know I could put files on a disk in the A or D drive, which I have done, but I was of the impression that I could do things more efficiently this way, instead. Indeed, I would like to be able to download entire programs from one machine to the other. But lets keep it simple.) What I have done so far simply doesn't work.
View 9 Replies
View Related
Mar 1, 2008
I'm trying to gain internet access on a wireless network from a PC without a wireless card through a laptop that has a wireless card using an ethernet cable in Windows XP but keep getting limited or no connectivity. It wont let me turn on internet connection sharing on the laptop because 192.168.0.1 is being used by the gateway, what can i do?
View 8 Replies
View Related
