I took my daughters Gateway M320 laptop and did a restore from the CDs that came with the laptop. After doing all the Microsoft Updates, ALL the wireless driver installs from Gateway there is no 'Wireless Network Connection' icon. I have also checked Device Manager and there is no wireless adapter. Before this exercise she was running wireless fine. It does work 'hard wired' but no wireless icon.
View 16 Replies
I have a Dell latitude D505 and reinstalled the OS on it, i loaded win2000 on it first and updated the heck out of it. every service pack ect. internet worked great. Now i upgraded it to winXPPRO and can not get the Ethernet controller or Network controller to work. cannot get on to the net wired or wireless. I did try installing the drivers before the chipset's but i think even after installing that it would work. nothing. tryed like 5 different drivers for this and nothing. i do not have any dell cds so im doing good so far the only thing in the device manager that is showing up in other devices with points over them is the Ethernet and Network controller.
View 14 Replies View RelatedDoes anyone happen to know how to successfully create a network in Windows XP Pro for a wireless laptop and for an Ethernet-hooked-up (non-wireless) computer. I'm trying to printer and file share the two together BUT I've exhausted myself in trying to make it happen. Has anyone successfully done this? Am I missing something? Perhaps hardware?I would truly appreciate any help or advice.
View 14 Replies View RelatedI have several network drives. I am on a laptop and whenever I disconnect from my dock (wired connection)it automatically closes any open folders connected to a network drive.My wireless kicks in a few seconds later, and I have to go through the trouble reopening them all!Is there a registry setting I can set to prevent this?If I turn the PC on outside of work, it doesn't connect these drives, and thus will prevent them from showing even when I go in and connect to the network. I have to connect them MANUALLY every time.
View 6 Replies View RelatedJust yesterday, my wireless was working. I have not added or removed any programs. Today, my computer shows that my wireless card is working properly but it is not finding any wireless networks in range, which is wrong. Yesterday, while at my apartment, I could see 9 networks, today I see none. When I go to the coffee shop, it does not see that network either. Right now I am sitting at my school and it is not picking up the network in here either. Everyone else around is picking up the network, just not me. I have checked everything and cannot figure out what the problem is. I have a Compaq Presario R3000Z, running on an AMD Athlon XP Processor (3000+), 800 MHz and 2 GB Ram. Running XP Pro w/Srvc. Pack 2.
My internal network card is a Broadcom 802.11b/g WLAN. I even uninstalled this and rebooted and after reload, it still does not want to pick up any of the networks. Any ideas where I can start? Already tried the program that fixes corrupt TCP/IP drivers (WinSock XP) and it did not work. Again, nothing was changed prior to this problem. All the settings are the way they have been for the last 3 years.
My problem is : When I called Verizon yesterday, I was told that to connect the printer to the router, I do not need the print server. I was asked to locate the ethernet port at the back of my printer, plug the ethernet port cable and connect it to the Verizon router. Unfortunately, my printer does not have an ethernet port. I was told to call HP,and I did but did not get much help.What should I do to get my wireless printer work? I have a PC and a laptop. Prior to Verizon, I have a DSL and Vonage, both routers and print server did not have the same problem.
View 1 Replies View RelatedHow do I know if my laptop has a wireless card or not? The wireless icon is not loading in the system tray so I think I may need a card that I can plug in.
View 1 Replies View Relatedwe're trying to do a wireless network with desktop. We've got the wireless part working, we can get to the internet from the laptop. But I can't figure out why it's not seeing the "workgroup" and the shared folders that we shared on the desktop. I turned on my own laptop and the shared folders just popped up without even trying, but on my mom's laptop, I can't see the workgroup at all. I had the printer installed at one time and it worked. But then I changed the name of the desktop computer, and then I deleted that printer and tried to re-do it, but it won't even see that there's anything under the workgroup. And then sometimes it won't even see that there IS a workgroup.
View 2 Replies View RelatedI was randomly cut off my wireless network.. Thought it could be a temporary problem so just slept it off, woke up again this morning and I've not been able to connect my laptop to the wireless network. I've even come down to the host computer and placed my laptop next to it, to see if the signal was any better.. and it is just non existant. I click on "wireless network connection" and refresh network list and it just "no wireless networks were found in range" and whenever I click refresh network list it just comes up with the same message straight away.. Not allowing it to search. I'm so worried it might be something to do with my laptop because I am going to uni next week, so NEED wireless when I am there.
View 4 Replies View RelatedI am trying to set up a home network. However after installing a Belkin F5D7000 Wireless Desktop Network Card I get the following error: PCI Simple Communications Controller Error.. Search For Drivers. I have the installation disk and I have tried manually pointing the Hardware Wizard to the file, but it will still not pick up the drivers. I have the latest drivers from Belkin - no joy.This is the second card I have tried and after installing into another computer it worked fine. However the machine I am trying to install onto is older. Pentium III 450 on a B7XAN Motherboard. O/S Windows xp pro.
View 3 Replies View RelatedI have two computers wireless connected. What I now want to do it set up a password so hacking into the system by outsiders is as difficult as possible. I think we are talking "network key" or "Wired equivalency Privacy Key". I know nothing about setting up a wireless connection so don't want to risk disturbing the existing set up which works fine; I just want to add password access.One computer has Windows XP Home and the other Vista Home Premium. Can anyone give me some not too technical advice that will help me do this please?
View 14 Replies View RelatedI've got a wireless network setup in my apartment. One desktop, hardwired to a wireless router and hardwired to a printer. Two laptops, both connected to the wireless network for internet and printing. It has been working fine for over a year now. No glitches. But about a week ago, one laptop stopped being able to print. It is still connected to the network for internet, but it won't print. The other laptop is printing fine, so it shouldn't be a network problem. The desktop is printing fine too. I've tried disabling the firewall on both the laptop and the desktop. Nothing. When I try to print from Firefox, I get the following message: Printing failed when starting the document. When I try to print from Word, I get: Windows cannot print due to a problem with the current printer setup. Try one of the following: Check the printer by printing a test page from windows. Make sure the printer is turned on and online. Reinstall the printer driver. When I try to print from Notepad, I get: The RPC server is unavailable. And finally, when I go to "Printers and Faxes" in the Control Panel, right click on the printer and choose "Sharing", I get: Printer properties cannot be displayed. The print spooler service is not running.
View 14 Replies View RelatedI'm running XP Pro and have installed wireless cards in my PC and laptop. They seem to be communicating with excellent signal strength. I've run the network setup wizard on each machine and setup a home network called 'Mshome'. I've restarted both machines. In My network places, there is a network called Mshome. When I try to view workgroup computers, the only machine listed is the one I'm currently using - I can't access the other one.
View 29 Replies View RelatedThe wireless internet isn't working... I don't know what wireless card I have.. I should only have to install the driver, but I can't get online to download it.
View 10 Replies View RelatedWe have two laptops and one wireless (HP Photosmart C7280) printer. Our laptops both connect to the internet wirelessly through a router. I was able to install and can print wirelessly from my laptop (a Mac) with no problems. However, we cannot figure out how to print wirelessly from my boyfriend's laptop (a Dell). We have installed the printer software and the printer itself on his laptop, and the laptop is able to identify the wireless printer over the network. We made sure that the printer is set to "online" and that file/printer sharing is turned on. But, whenever we go to print any kind of a file, we get an error message simply stating that the printer was unable to print and that we should run the troubleshooter. So, we run the troubleshooter, and we get this message:"The troubleshooter was not able to ping (detect a connection with) your print server. This might be the cause of the problem. Verify that your network is configured correctly and that you are connected to the network."
I am more used to working with Macs and my boyfriend is computer illiterate, so we're a bit lost as to what this means. I was able to set up a wireless network connection on his laptop, but beyond that I'm not sure what else to do. Most of the other advice I've seen online involves a wireless printer that is wired to one computer, and another laptop trying to wirelessly access that printer through the connected computer...if that makes any sense. Our printer isn't wired to anything, and we just can't figure out why it'll print wirelessly on the Mac but not on the Dell laptop. Any ideas?
I have aproblem with my XP machine.when i boot up the small wireless icon says its not connected,Also when i click to view available wireless networks that there are none in range, i reboot the pc and it might resolve it .More often than not it doesnt.Also i sometimes get a yellow exclamation mark over the wlan in device manager.I update the driver and it resolves until next time i boot back up the pc.Wireless switch is on. My 2 other pcs wrk perfect.
View 1 Replies View RelatedIf i log onto my computer and just go into network connections, the computer is not able to look for wireless networks. if i hit the button to find networks, it gives me some strange error message. i have noticed though that i can fix the problem if i manually go into services and start the wireless zero configuration service myself. i configured this service to start automatically, and to keep restarting if attempts to start fail, but for whatever reason, the service does not start on its own when i boot the computer. once i start the service, i am able to connect without any problems.
The error message i get says something about finding more than one wirless device. i have a belkin usb wireless card, and before i installed the one i have now, i had another that coincidentally was the same size and also made by belkin. thinking that maybe some software was still on the computer, causing it to find both, and consequently not being able to connect to either, i uninstalled all the software for both routers and deleted all the related program files off of the computer. then i reinstalled and...got the same exact problem.
I have a Logitech M305 wireless USB mouse that my XP won't recognize on any port. However MY XP recognizes my wired USB mouse and printer, and scanner. The M305 works fine on my other machines?
View 3 Replies View RelatedUnable to shut off wireless network, light stays on, I have XP system on a HP Pavilion ze5500 laptop.The switch is on the front of the laptop, unable to shut it off and when I boot up I get a popup that says (wireless network is not connected) this popup stays on the screen untill I delete it.
View 6 Replies View RelatedI have a built in wireless card in my Dell D610 laptop. Every time my computer wakes up it gives me a notice that it has detected a wireless network somewhere (even if it is secured or is very weak. This is annoying.
Can someone tell me how to stop this, or at least cause the notice to disappear after 1 second, rather than after about 20 seconds?
XP has stopped connecting to my wireless connecter "Wireless Network Connection Not Connected" Device manager says everything is normal, and I can identify other local wireless networks. XP recognizes that the connector is there, but it won't hook up. I have disabled and reenabled the wireless connector and reloaded all of the Broadcom software. I tried to do an XP repair, but I am using SP3. The slipstream recovery disc that I made is asking for a password to get into XP, but there isn't any. I've verified this with three different password cracking programs. Everything else is working; I am on an Ethernet connection now.
how to force XP to connect or know what drivers I need to reload that are used to connect to the wireless connector besides the Broadcom's that I have already reloaded? I really don't want to do a complete XP reinstall.
I had a problem trying to connect my Canon Pixma 4000 so that I could access it wireless via our home LAN. I have one laptop(the wife's) attached directly to the router (cable service from Optimum). My laptop is used wirelessly from another part of the home. All was working well, except I could never get the printer to work so that I could use it wirelessly, so I had it plugged in directly to my laptop. Up to this point, it was all ok. I have AVG and ZoneAlarm running on both computers. A friend, (really) was at my home and volunteered to connect the printer so that it would work wirelessly. He is a UNIX administrator, manages a number of pc's too. I thought, "this is great, my own administrator".
To shorten the story, he removed ZA, the computer will not work wirelessly, only works when connected directly to the modem and the printer doesn't work wireless. I called ZA, and they guided me through removing all the "orphans" that were left behind, so that cleared up a problem whereas I could connect to the net, but couldn't get to another url. I did not re-install ZA yet, because I don't want to add anything else into the mix. I will post a HJT log if that is what is needed. I DO NOT care if the printer works wirelessly. I will live with it connected to the back of my computer, BUT, I do want my laptop to work wirelessly so that both me and my Frau can be on-line at the same time. I have been through the IP address checking, all is ok there. If I try to connect via the SYSLINK wireless, I get nothing, even PING ing different sites gets no valid response. Regrettably, I have some tech knowledge, but not enough to figure out this one.
Is there any way to pull a wpa key for a wireless network out of windows? Can anyone tell me where the key might be stored if nothing else?
View 7 Replies View RelatedThe Driver for a wireless network adapter mn-720 needed.
View 1 Replies View RelatedI reinstalled windows xp sp3 on a old laptop. Everything went fine except for internet connectivity. I have a wireless network to which I connect several computers and devices and everything works like it should.When I try to connect my laptop to this network, it fails.Every 5 seconds it goes from not connected to acquiring network address.I am sure that the key is correct, I am sure that my router is belkin router is wireless G and so is the Ralink RT2500 card. I am also sure that I have not white listed MAC addresses so my laptop won't connect. Basically I have done every simple thing that perhaps could be causing the problem.
View 7 Replies View RelatedIs there anyway to enable your wireless network connection and disable it with the starting & stopping of your web browser (IE 6.0), Win XP Pro, service pack 2. I like my wireless connection to be disabled when I am not surfing the web. Can I automate this task some how?
View 5 Replies View RelatedI can connect to the internet, but I don't know when I get kicked off. The display on my taskbar always shows it is disconnected. When you pull up the screen is says " non connected" but it actually is, then about 15 mins later it kicks me off and I have to re connect manually. This is very time consuming and is a pest. I have tried restoring my registry to an eariler point and have checked for spyware and virus.
View 5 Replies View RelatedI am using a Toshiba Satellite Pro 6100 Laptop running Windows XP.I restarted the laptop, and was prompted to either start Windows normally or start uing last know best configuration-I chose to start with last known best configuration.Now when I go to Network Connections, there is no Wireless Network Connection Icon. However, when I go to Device Manager, the card is present under Network Adapters(Toshiba Wireless LAN Mini PCI Card), and it states it is working properly.How do I get the icon back into Network Connections, so I can use my wireless again?
View 1 Replies View RelatedIn the Wireless Network Connection Properties box under the Wireless Networks tab, there is a checkbox available for "Use Windows to configure my wireless network settings." In the past this box was checked and stayed checked all the time even if I rebooted, restarted, etc.. Starting a few days ago whenever I reboot, startup, etc. by default this box is now always unchecked and I have to go in and recheck it each time.What's making this box uncheck itself and how do I get it to stay checked again?
View 1 Replies View RelatedI got my computer fixed See thread I am having another slight problem. I don't think that this problem was necessarily caused because of the others issues I have recently fixed because I have had this issue in the passed but it just seemed to fix itself. I have a HP zd7000us laptop with wireless capabilities. However I the system does not even show any wireless network available. My desktop in my house has no problems going online with the wireless, neither does my psp for that matter. It's like the computer doesn't even know it's there. I went to the hardware wizard on my system and it says the wireless card is working properly but it will not see any available wireless networks.
View 2 Replies View RelatedI have found in Group Policy that there is a policy called Turn off Microsoft Peer-to-Peer Networking Services and is located under Computer Configuration Administrative TemplatesNetworkMicrosoft Peer-to-Peer. I have enabled this policy and applied to a test Windows XP SP2 machine. I have found that on this test machine I can still create a new ad hoc wireless network. how I can prevent users from creating ad hoc networks? Or why this policy is not working the way that i thought it would?
View 3 Replies View Related
