2 Updates - Rebooting - Installation Of A New Firewall
Aug 11, 2005
Upon rebooting, after installation of a new firewall, I denied access to a flurry of Windows access requests until I could find out what they were I am now worried that some or many, may have had something to do with the automatic Windows updates. Everything is working fine so far, but how can I check to see that I haven't missed any updates. If access was blocked, would they automatically be re-sent?I am still trying to identify all the processes in my firewall log that I
have marked to "Ask".Secondary, unrelated question, while cleaning up my system before this installation, I found 9MB of files in the TEMP folder under my D&S, LOCAL
attempting to help a neighbor resolve a problem with his computer. Toshiba Notebook running XP SP3. He attemped to renew his Norton AntiVirus Subscription , download 2009 to update from 2008. He had Zonealarm running as a firewall on computer. Ran in to an issue with Norton install locking up. Contacted Norton via Web and opened a CHAT support session. Norton rep told him that 2009 wouldn�t work with Zone Alarm, and the rep proceeded to uninstall ZA. During uninstall encountered an error, rebooted to safe mode, went to command line and manually updated Registry , and deleted files (and didn�t backup Registry). Rebooted and AV still wouldn�t installed. Then the user lost Internet connection and lost support. I uninstalled Norton (using their Removal Tool) and internet came back. Attempted install of 2008 AV and install completed, but when attempting Live Update it failed and reported Internet Connection failure. Ran live update out side of app and it return error 1814 and failed. I�ve tried to clean up and remove any thing I can find in the Registry from Zone Alarm. All of Symantec apps and files have been removed from the computer. I attempted to download / install Uniblue Registry Booster 2009 from the web, and during the install it shows 1%, and then errors out with message, Downloading of Installation data from web has failed. Please makes you are connect to the Internet. I have confirmed that MS Firewall is turned off.
I started having issues with IE8 although I do use Firefox for browsing, but still have to do my Windows updates and such. Then I ran a utility download to clean up PC and registry and lost the ability to do updates, and can't install Windows products, and my disk drives have driver issues. No, I did not backup or do restore point and I have tried my restore points to no avail.
the S3 sleep state to work on the Tyan Thunder K8N motherboard running WindowsXP Pro x64? When I check my sytem from within Windows, it only says it supports S1 and S4 sleep states... I have the most recent motherboard bios and all other 64-bit updates installed... but for whatever reason, no utility, test programs or even Windows itself sees that this motherboard supports the S3 sleep state.It's a logo'd desktop motherboard, so it is supposed to support S3, but I can't for the life of me get WinXP Pro x64 to recognize that it does.
For several weeks now I haven't been able to download/update Windows updates. I have been working with Microsoft Tech Support (via the telephone)for several days now and we haven't been able to correct the problem(s). My question is... can I use the Windows Installation disk to "fix" any problems my machine is having with the downloads/updates? Is there a "fix" option on the Windows disk and am I at risk in using it? I don't want to lose anything on my desktop because it is the way I want it at this time.
I can not get new windows updates! I have been every where to solve this problem! My update icon showed up, so I clicked on it like I usually do, but it would not start! So, I went to start, clicked on windows update there! The page opened, but it was small and sometimes it would not fully open! It would freeze half way through the process! So I rebooted, went directly to microsoft updates, sometime I made it there sometimes I did not!
The last windows update that I can see is KB 905474 and was downloaded by my automatic updates.I can see it when going to windows updates/view history. Trouble is, I cannot see it in my add/remove list. does auto updates only download security updates and I assume I dont have to do anything.
I am using eTRust EZ firewall and just recently started having problems with it and the effect on my pc. First, it wouldn't let me select allow or ask under the access internet or trusted column under the program control. Now, it won't let me access the internet if the program control is turned to low, medium, or high. The only way for anything to get to the internet is if the setting is turned off
My firewall settings are greyed out and a banner says some functions controlled by group policy but I have a home computer and no network administrator. I tried resetting the firewall setting and it didnt seem to work
I connect to the internet thru a router with a built in firewall.(turned on) I am also running a software firewall with comodo. Do I need the comodo firewall Every new update version of the comodo firewall seems to mess one thing or another up on my old winXP machine.
Windows XP Home running McAfee Security Center, which is not managing Security Center, and McAfee Personal Firewall is not installed.All Windows Critical Updates are applied.Windows Security Center says the Windows Firewall is off, Windows Firewall says it is on.
I have a new system at home which I am getting ready to roll out. I have always used Norton Security on all my PCs prior to using XP Pro. This new system has XP Pro. Should I , or maybe should I say can I run both Norton and XPs firewall with no problems Don't want to keep paying for annual subscription updates to Norton, if I don't have to
I have Windows XP and have the windows firewall on. I also have Norton 2005 Systemworks. Funny thing happened, I turned off the windows firewall under control panel, windows firewall. But when I open control panel, security center, it says there is a firewall on. I don't beleive I have a firewall with Norton Systemworks
I've got an NEC LCD2010X monitor, and everytime I download the latest update from MS for either the NVIDA or Matrox Video cards I always find the drivers don't work... why ? Latest case is with the NVIDA update - I can't go beyond 4bit 640x480.
Is there a way to disable Windows Automatic Updates from updating device drivers. There are a several PC's at my job that have problems with a device driver update from. I would still like to recieve regular security updates, but I dont want any device driver updates.
I click on install, they install, I reboot - then, hey presto, they're back again!! I know the easy way is to turn off automatic updates - but, surely, there's a way around this?
My computer is only about 4 months old and I do not have it set to receive automatic updates. It seemed, with my last computer, the updates created more problems than they were worth. Does anyone have an opinion on how important it is to get these updates or am I just as well off not receiving them? The last time I checked to see what updates were available it appeared Microsoft even said that some of them could create problems.
I've lately had some problems with my win-xp (home) following installation/ un-installation of daemon tools that corrupted some registry files. After an unsuccesfull repair-instalation of xp, i re-installed xp onto the secondary partition of my hard drive (d:, the original instalation being on c. I was intending to format the c: drive, then instal a copy of xp-pro i have onto it
finally moving the files i want to keep back from the d: drive onto the c: drive.The problem i'm now having is on formatting i recieve the error message 'system partition is not allowed to be formatted', as it is the primary partition. Can i go about formatting this drive in partitions and proceed with the re-install without having to remove the files i have on the d: drive? How might i go about this?
Use Windows Update to find driver updates In Windows Update click Custom Install in the main column, and then click Select optional hardware updates in the left-hand column. Windows Update examines all parts of your system to determine what needs updating and it may recommend more than just driver updates. It's a good idea to visit Windows Update regularly for driver updates and other non-critical updates.
I am using XP Pro SP 2 with automatic updates enabled. As far as I understand since April 2005 updates are downloaded from Windows Update site once a month Correct me, if I am wrong) somewhere between 10-14 of every month? If so, how should I install critical updates, which issued between two monthly update dates?
I have downloaded SP2 and some additional updates, I am not able to download files/updates from www.apple.com. Is there some glitch or do I need to reset some of the settings so that it will let me download from their site? (I'm trying to download ipod updater but the login and download buttons do not load)
My computer is in perpetual reboot mode. It opens windows and as the programs are loading it will suddenly reboot itself. The problem started after I tried to install Koday Easy Share digital frame software.
I started up the computer, watched the BIOS detect the RAM, hard drive, etc, and then was greeted by a blank screen instead of the Windows boot screen. It proceeded though, and after a few seconds flashed to another black screen, this time displaying the cursor. I'm guessing this is the logon screen, but nothing displays but the cursor. (Note that the video card and monitor are both fine...I tried swapping them out just in case.)
I got XP PRO sp2 a few weeks ago and microsoft has downloaded their automatic (hot fix) updates about 20-25 times. The last download failed and the the message read that I would have trouble booting XP because of that failure. Well, they were right because now Xp will not boot up-- it just keeps rebooting.
To try to correct this I have tried to use my XP CD to repair it but it asks for a password from an administrator-- that's not me I have tried F5 to get into safe mode, safe mode command prompt, last known good configuration..., and debugging mode and nothing works.
I start up my computer and then after a few minutes later, my computer screen goes black and automatically reboots on itself. After reboots it somehow hangs on me before getting into the login page of xp accounts.
This has been going on for a couple of months now.The PC would just reboot all of a sudden, usually when we pop in a CD in the drive, or log on to another user account. When we try to turn the PC on, it takes about 5-10 reboots before it goes on to the Windows logo (or whatever you call that). I'm worried that it might be a virus. I tried Trend Micro's Online scan and left it for a while only to find that the PC reboot in the middle of it, and now, I can't get the scanner to work anymore (I keep getting this error message.) Also, to be honest, we usually leave the PC on for days on end, so overheating might not be so out of the question. Aside from overheating, I just wanna know what else we have to troubleshoot for regarding this problem? Is it possible that a virus is causing it? That's all, I just need a troubleshooting checklist.
The problem is it will not boot. It only shows the first screen where it tells you the type of processor and bios chips, it gives the cpu type, then I guess it tests the RAM, the cache sram, then system bios shadowed,then video bios shadowed, then it states the hard drive, then cd drive and the last thing on the screen is " mouse initialized" then it just keeps restarting over and over. If I try to go into safe mode, it does give me all the options, however when I choose safe mode, it just goes into that same screen since it is the begining of the boot and it keeps restarting again. He is running windows xp, I tried to do a repair install but I guess I have a different version of win xp and it doesnt give me the option to repair.
I just installed an Audigy 2 ZS and everything works fine until I reboot; at which time my computer goes mute. There is nothing muted in the Volume Control applet, the Device Manager shows no conflicts, and onboard sound has been disabled. I'll post an abbreviated DXDIAG (this is with sound operational, if matters.Uninstalling the card, rebooting and, after letting windows detect the new hardware, reinstalling the driver, will correct the problem. Until I reboot again, at which time the computer is again, mute.
i wonder if anyone can help? our computer keeps rebooting on us for no reason that i can determine. i have done so many anti-virus scans and anti-spyware scans and so on with no result. there doesnt seem to be any specific program that causes the shut down. any suggestions would be welcome.
I had a computer with WINXP and a celeron chip. I changed motherboards to a Tyan with a 1.5 Pentium4. I reused the hard drives and when I start up the computer it gives me the message that Windows was not shut down properly and do I want to go toa last know restart or start in safe mode or start windows normally.No matter what i do, the computer will start to boot and then it reboots itself and the process starts all over again.
