Press Any Key To Boot From CD / Message When Installing Pro
Apr 6, 2007
I've tried several times to install Windows XP now on a new Maxtor drive bought just the other day. When I have the disc in, it loads to the blue install screen without asking me to press a key to boot from cd, I choose to install, partition the drive and format. It copies the files and then restarts, but when it loads again it still doesn't ask for me to press a key (which you aren't supposed to press the second time), and it loads back to the first menu, where I can start all over again.
View 6 Replies
ADVERTISEMENT
Jul 9, 2005
i have a 250GB Hard Drive and I used Western Digital's Data Lifeguard Tools 11 Tools to allow Windows to recognize all 250GB and break the 24-bit barrier. When I install Windows XP Pro, it goes through the format and the file setup fine (as far as I know) and then when it goes to boot, it goes right back into the Setup Config...it doesn't go on to install Windows. When the disk is taken out it just continually restarts and claims that there is an invalid BOOT.INI.
View 13 Replies
View Related
Jun 10, 2007
first i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
View 3 Replies
View Related
Aug 12, 2002
Format the partition you are going to use for the install.Restart your computer.Go into the BIOS Change your boot order and Make the CD-ROM your boot drive.Insert the CD and restart the Personal Computer.When prompted, Press Any key to boot from CD-ROM.Make sure that your computer is boot able by CD, otherwise this will not work.
View 9 Replies
View Related
Oct 12, 2008
Today my computer went slow so i restarted it and from that point it kept doing the same thing: it starts, then the dialog where it asks u if to start normal or safe mode (but keyboard doesnt work) then after the 28sec it tries to load windows, but a blue screen is shown and then restart again. I put the reinstalation CD but when i get to the "To boot from CD press any key" i cant becouse keyboard is not working.
View 7 Replies
View Related
Feb 22, 2007
Anyone know how to automatically boot from the hard drive? Has any one seen this before? I have been in the BIOS, set the hdd as the first device to boot from.I have looked through the BIOS but I can't find anything that jumps out as different or pertaining to this Boot Message.I looked at the boot.ini file, nothing there.I am running Win2k Pro.I don't know where else to look to disable this boot interaction..
View 7 Replies
View Related
Apr 13, 2006
I'm using a pentium3, micronpc. I'm running on xp pro. press alt+Ctrl+Del for the pc to continue start-up. I've already gone into the BIOS settings and changed the boot sequence around but it's still not conrected the problem.
View 8 Replies
View Related
Aug 8, 2010
When I restart the computer it POSTs fine (counts the memory, displays "the" table... etc). When It's about to start Windows it starts beeping. Continuous short beeps. The cursor just blinks on the screen and it beeps. When I press F8 to get to the boot menu, nothing happens. No boot menu appears.I did a repair install from my XP install CD - same thing happens, nothing has changed. I tried to restore MBR record through recovery console but again same thing, no change.
View 9 Replies
View Related
Aug 19, 2007
My comp is acting weird so i decided to either repair windows or reinstall windows, but after it says press any key to boot from cd, and i press a key, i get a blank screen or it loads windows.
View 14 Replies
View Related
Oct 18, 2009
I have searched for some weeks now and have seen an increase in people who also found that while viewing in the Full Screen option on You Tube and/or Hulu.com that the "Press Esc to Exit Full Screen" message that appears in the center of the screen does Not fade away after a few seconds. Of course that makes Full Screen viewing unacceptable. I posed the question to the site itself and have never received a reply. One general forum said something about Unlocking certain Files (Adobe) that were found locked because of cookie handling upon installation, but as a novice that is beyond my comprehension.In any case, is anyone aware of a fix for this problem? (That message is not suppose to stay there) I am using Win XP IE8. I tried viewing using the Firefox Browser (3.5.2) and it did not help.
View 3 Replies
View Related
Jun 15, 2010
When I try to boot Windows XP it says "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" What do I do?
View 3 Replies
View Related
Nov 12, 2009
Trying to start my computer and it gets to the screen where it gives me 2 seconds to press F11 to start recovery. But after 2 seconds or pressing F11 or any key, another line appears saying the same thing "Press F11 to start recovery". Can't get past this point and start Windows. HD is recognized in another computer as well as in BIOS.
View 5 Replies
View Related
Feb 19, 2005
I recently installed xp for the first time after replacing motherboard and CPU.I skipped setup because I didn't know what I was doing. Now I can't boot up (cold or warm) without using the original disk. Can I just go into setup and change boot settings without re-installing.Is there anything else I should know before I attempt to fix this problem? I am tired of using the disk every time I update something or install new program.
View 14 Replies
View Related
Dec 25, 2004
I'm trying to install a game from a CD and there is an error message which sais," Setup is unable to locate a file it needs to continue. Please make sure the CD-ROM is in the drive and press retry to continue." I click on retry and the error message keeps on appearing.How do I solve this problem?
View 6 Replies
View Related
Mar 26, 2007
i am putting a new hard drive in a laptop ,but the installation only gets so far,it will format etc etc load files then I get an error message "non emulation press any key to boot from cd" this just keeps on rolling and wont go any further,
View 14 Replies
View Related
Nov 8, 2009
Getting error message when trying to change out a 10 gig to a 250.NVIDIA Boot Agent 201.0462 PXE-E61: Media Test Failure, check cable PXE-M0F: Exiting NVIDIA Boot Agent DISK BOOT FAILUR, INSERT SYSTEM DISK AND PRESS ENTER" this drive I am upgrading also has Windows XP OS. I have another drive on the computer that has 160g.
View 13 Replies
View Related
Jun 11, 2008
My computer was working perfectly well. I left it on and went out. When I came back it had a black screen saying "boot disk error, insert system disk and press enter" in BIOS. This has happened before but I just hit my pc then rebooted then no problem. This time it didnt work, I have tried to vacuum the interior of my pc but to no avail.
View 9 Replies
View Related
Mar 23, 2010
I have a dwsktop vaio When I boot from cold it does not find hard drive. I get an error message Disk boot failure Insert system disk and press enter. If I restart the computer and go into the bios it does not show the hard drive but when I come out of the bios it then boots up.It will only bootup if I go into the bios first?
View 1 Replies
View Related
Jun 23, 2009
What can I possibly do to solve this problem? I have Windows XP and everywhere.
View 1 Replies
View Related
Apr 12, 2005
So I'm having a bit of a nightmare trying to get my copy of XP to boot.Every thing was working fine and then I tried to make a back up image of my drive using Norton Ghost 2003. I have a 200Gb Wester Digital SATA drive and an Asus A8n-SLI mobo. I think that there might have been some problem with the nVidia IDE/SATA drivers as ghost crashed half way thorugh the image making process. Now when I try to boot I get a "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER"
View 4 Replies
View Related
Nov 21, 2009
Disk boot insert system disk and press enter comes what do i do?
View 2 Replies
View Related
Oct 25, 2006
Re-installing a game, Enigma: Rising Tide I receive this error message. This happened one time before. I don't recall how I was able to overcome, but presently I had to re-install the game and now I have this error message again. I understand that there have been other instances with others installing games where this message appears.
View 5 Replies
View Related
Jul 9, 2010
I have had trouble with the .net framework. Because of possible corruption i deleted all .net framework files.Since then i have tried to install the .net framework files. i continue to receive a message that reads ERROR 1402 could not open key HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionSharedDlls. Verify that you have sufficient access to that key.or contact your support personnel
View 4 Replies
View Related
Aug 11, 2005
I HAVE MICROSOFT VALID XP PRO CD WITH LEGIT. PRODUCT KEY. WHEN I GO TO WINDOWS UPDATES I GET AN INVALID PRODUCT KEY MESSAGE. I HAVE USED THE WALK AROUND BY GOING TO TOOLS, MANAGE ADD-ONS AND DISABLING THE WGA. IT WORKS, BUT AS A PERSON WHO LIKES TO DO THINGS CORRECTLY , IS MICROSOFT COMING OUT WITH A FIX FOR THIS FRUSTRATING ISSUE..
View 2 Replies
View Related
Aug 11, 2005
I HAVE A VALID COPY OF WINDOWS XP PRO. WHEN I GO TO WINDOWS UPDATES IT VALIDATES THEN I RECEIVE A MESSAGE THAT YOU HAVE AN INVALID PRODUCT ID. I READ IN A NEWS GROUP THAT IT WAS A BUG. I RECEIVED THIS QUOTE FROM A NEWGROUP POSTING. The result of a bug in WinXP SP2's code that creates the PID for display. WGA extracts the correct PID. The one displayed in System Properties General tab will have the OEM-00 issue because of the bug.
View 2 Replies
View Related
Apr 4, 2005
Try to install new software Turbo Tax and the software for my new Epson Scanner. I get this application error message: This application cannot run. That is all it says. I've had this computer for three years and have installed software many times with no problems. There is plenty of room on the hard drive. I have tried installing in safe mode. I have tried to restore back. I have done a defrag.
View 8 Replies
View Related
Aug 4, 2009
For some reason my other computer i dont understand it alot but when it comes to a Disk Boot Failur, enter system disk and press enter i usually just shutdown computer plug out the wait around 5-10mins but for this time it has really driven me up the wall. at the moment now it hasnt worked and im asking for help here are some of the things i did... like i said before jst left it and wait... putting OS disk in and try to repair didnt work... try to reinstall didnt work it said it cant OS system something like that... changing my boot system to have HDD first and than CD-ROM than floppy (yes i do have a floppy drive).. but one thing it had told me Win XP when i first tried to repair it it said you have to quite when it count down on when to reboot it said if you have a floopy disk unplug it out and i did it and still not working.
View 7 Replies
View Related
Apr 28, 2008
Just finished installing (went OK) the SP3 RC beta and now the computer won't boot up, gets thru the Windows XP screen, waits for about 20-30 seconds then shuts down and reboots-continuously. Does the same procedure even in safe mode or best last configuratioin mode and no error messages. If I configure it to not auto reboot I do get the following error message: Stop: C0000319 (entry point not found). The procedure entry point. gdigetbitmapbitsSize could not be located in the dynamic link library. I didn't realize that the final SP3 product is due out tomorrow. Am I doomed to reinstalling XP from the CD or is their other "majic" that can be worked? I could remove the system hard drive and install it in an external enclosure to retrieve the data if I do have to reinstall XP.
View 1 Replies
View Related
Oct 30, 2009
I have just purchased and installed a RadiSys Endura EM945G MOBO with my old PATA HDD (Seagate ST38001A) and have hit a brick wall. First of all I put the IDE to SATA adapter on the HDD and applied power and data cables. The drive will not spin up at all. I tried changing the bios (Phoenix Award 5J1R2P34) options for the SATA to every option (combined, enhanced and SATA only) to no avail. Any clues on that would be helpful, however.
to circumvent this and just get the PC running I put the drive on the IDE controller by itself. It spins up and attempts to boot but goes into a cyclic reboot. I suspect it is being caused by the old AGP driver being loaded. This MOBO has onboard PCI graphics so I don't need the AGP driver at all. I've tried every safe boot option but still no go. Back in the old days you could do a step by step confirmation to loads selected drivers. Is that possible with WinXP (SP2)? I could try making a bootable CD and putting the CD drive on as a second (slave) drive on single IDE controller but don't know how I would modify/delete the AGP driver if I did get it to boot.
View 7 Replies
View Related
Mar 22, 2006
When doing an XP windows re-install. I am getting the error "Error loading operating system" I was formating the drive with XP and it stopped. Now when rebooting to go to CD for install I get the Error.
View 14 Replies
View Related
Apr 20, 2005
When i try to install xp sp2, I keep getting "the data is invalid. xp sp2 could not be installed" error message.
I have re-installed windows and tried installing sp2 from CD, and tried the downlooad from the microsoft website, both with the same result.
View 1 Replies
View Related
