Just finished installing (went OK) the SP3 RC beta and now the computer won't boot up, gets thru the Windows XP screen, waits for about 20-30 seconds then shuts down and reboots-continuously. Does the same procedure even in safe mode or best last configuratioin mode and no error messages. If I configure it to not auto reboot I do get the following error message: Stop: C0000319 (entry point not found). The procedure entry point. gdigetbitmapbitsSize could not be located in the dynamic link library. I didn't realize that the final SP3 product is due out tomorrow. Am I doomed to reinstalling XP from the CD or is their other "majic" that can be worked? I could remove the system hard drive and install it in an external enclosure to retrieve the data if I do have to reinstall XP.
I recently installed xp for the first time after replacing motherboard and CPU.I skipped setup because I didn't know what I was doing. Now I can't boot up (cold or warm) without using the original disk. Can I just go into setup and change boot settings without re-installing.Is there anything else I should know before I attempt to fix this problem? I am tired of using the disk every time I update something or install new program.
I have just purchased and installed a RadiSys Endura EM945G MOBO with my old PATA HDD (Seagate ST38001A) and have hit a brick wall. First of all I put the IDE to SATA adapter on the HDD and applied power and data cables. The drive will not spin up at all. I tried changing the bios (Phoenix Award 5J1R2P34) options for the SATA to every option (combined, enhanced and SATA only) to no avail. Any clues on that would be helpful, however.
to circumvent this and just get the PC running I put the drive on the IDE controller by itself. It spins up and attempts to boot but goes into a cyclic reboot. I suspect it is being caused by the old AGP driver being loaded. This MOBO has onboard PCI graphics so I don't need the AGP driver at all. I've tried every safe boot option but still no go. Back in the old days you could do a step by step confirmation to loads selected drivers. Is that possible with WinXP (SP2)? I could try making a bootable CD and putting the CD drive on as a second (slave) drive on single IDE controller but don't know how I would modify/delete the AGP driver if I did get it to boot.
I have an old HD From a system that I got rid of. I want to put it into a friends system to see if I can retrieve the files off of it and put it onto my external HD. The hard drive was the boot disk and the computer I am installing it on has it's own boot disk. If I boot up with two boot disks will there be a problem? Is there anything I need to take into account before doing this? I am planning on installing the old HD onto an ATA cable that I unplugged from the DVD drive. The HD that is in this system is not on an ATA cable, I'm not sure what it is connected to, just a small plug with a blue cable going to the mother board.
I'm having this problem with windows xp pro fresh install onto sata HD. Pressed F6 and installed sata drivers for the mobo etc. Now i hasten to add that i have tried this 3 times now, set up runs smoothly windows installs however when i have finished windows will only boot up with the CD in the CDROM. Been into Bios and changed boot sequence but still if no CD it just gets to boot from cd in the boot up screen and> stops, put the disk in and windows boots straight up and away we go.
I have just built a new PC from new components. It boots into BIOS fine and detects all the drives - SATA HDD and CD. I have set up CD as boot drive, and installed the XP Pro disc. It immediately puts message "Setup is inspecting your hardware configuration..." and then just sits there doing nothing. I have left it for a long time so far but nothing is happening. This is repeatable. Do I need to do something different eg load drivers from a floppy or is there a problem with my hardward set up?
I've tried several times to install Windows XP now on a new Maxtor drive bought just the other day. When I have the disc in, it loads to the blue install screen without asking me to press a key to boot from cd, I choose to install, partition the drive and format. It copies the files and then restarts, but when it loads again it still doesn't ask for me to press a key (which you aren't supposed to press the second time), and it loads back to the first menu, where I can start all over again.
I decided to upgrade to Vista today from Windows Xp. Rather than doing the upgrade process, I decided to start off with a fresh format/install. after the first reboot in the Vista setup process (where Vista attempts to load data from the HDD) the system would just sit there after post as if the Vista loader couldn't properly detect the partition. I currently don't have time to troubleshoot the Vista problem with my system, so in desperation I have tried to go back to XP. I am able to boot into Windows XP setup, format the drive, and copy over the beginning essential files. However, after the system reboots after the initial copy of the data... XP is not capable of booting from the hard drive. this was not a problem before I tried to install Vista.
To check if a problem had occurred with the drive, I installed Ubuntu Linux. Ubuntu is able to boot from the drive without any problems. However....... when Ubuntu loads grub, it detects the following on the MBR: The Vista loader appears to be preventing Windows XP from properly booting from the hard drive. The drive is a Western Digital 320gb. I have 30 gbs set aside for Windows to boot from. The rest of the drive is another partition with files I cannot afford to lose.
I have Hp media center with 1 Tet. dirve (this was installed) lateron. I had installed meida center 2004, 2005(winXp pro) when Vista Came I Installed Vista unfortunately clean install. so I lost xp.Now I am tinking to install win98,2000,vista and linux if possible then Media center winxp pro ver.How I should procede. If I go by installing with win98 and partitioning and installing os.
It might sound rather strange, but I need to install Win XP Pro over Linux Ubuntu. I plan on setting-up a dual-boot, but I need Windows to be installed first. When I try to boot from the Win XP Pro install CD (not OEM version, but complete Windows OS), I boot to Ubuntu. How can I launch the Win install and overwrite Ubuntu? Should I use http://dban.sourceforge.net/ to erase Ubuntu and then install Windows?
I'm trying to install Windows XP on my new Serial ATA hard drive, it has been formatted everything seems ok, When I start installing windows XP pro on this machine it seems like it just can't detect the damn hard drive, when I set it as boot on te serial ata drive eeverything works fine, it goes as C:/ but I just can't switch to my cd drive with windows XP to install it.When I boot up my other hrd drive with windows xp, I can actually see my hard drive in windows explorer.
i have a 250GB Hard Drive and I used Western Digital's Data Lifeguard Tools 11 Tools to allow Windows to recognize all 250GB and break the 24-bit barrier. When I install Windows XP Pro, it goes through the format and the file setup fine (as far as I know) and then when it goes to boot, it goes right back into the Setup Config...it doesn't go on to install Windows. When the disk is taken out it just continually restarts and claims that there is an invalid BOOT.INI.
I was goin to restart my computer b/c my internet connection wasnt working well, and when i went to the start menu-restart, the shut down button said something along the lines of "updates for your pc" so instead of restarting, I clicked on that. When i did that, the pc was telling me it was updating, then it went tot the blue "windows is shutting down" screen Well, it stayed like that for about 20 minutes, so I thought it may have froze (it's done this before when i wasnt updating, just shutting down) When I went to turn it back on, i got the black screen with the white text that said "We are sorry for the inconvieniece, windows did not start successfully"
I have 2 hard drives, one with my data running Windows XP and the other also with data running Windows 98. Right now it is set to boot off the Windows XP drive. Is there an easy way I can set up a dual-boot system to give me a choice on boot-up without clean-installing either OSs? I don't want to lose my data on either drive
I managed to create a new partition on my Compaq Presario C700 laptop and install XP. (It came with Vista).First thing I noticed was that I can not detect any wireless networks or connect to the internet now. I am assuming that I need that driver and a whole bunch of other XP drivers as well. I have visited websites where they have a whole laundry list of drivers to download for my situation. Before I go through the painful process of downloading and installing all of them, I want to make sure this is really what I need to do.
hi guys I have a problem, I was having problems installing flash player , after some troubleshooting from adobe website I restarted the system , and windows begins to boot ,the black windows logo starts and then It changes tothe blue microsoft windows screen and then it freezes ,it it doesn't continues to the log in screen. I haved tried on safe mode but the same problem persits. I also tried a windows repair but that also fail.
I clicked on the Icon for windows updates on my PC, and after the updates were done, my PC will not boot up.I keep getting one of those blue screens with one of those wonderful error messages.I have tried doing a system restore, several times, but it will not even let me do that
I install Server 2003 Standard SP1 downloaded and installed on a PII 400, 256Mb RAM with IIS, ASP.Net 2.0, SQL server 2000 SP4, Mysql 5, and PHP5, and all without a single hitch...too good to be true. I went ahead and tried on what will be my server PIII600, 512 MB RAM, First try, Server 2003 couldn't find a file when installing, retried and it worked. Downloaded SP1 and when I was extracting it said "file is corrupt", downloaded 4 more times with same result. reformatted and reinstalled 5 more times and cannot get past "file is corrupt" on SP1 and sometimes extracting the .Net 2.0 installer got the same error. I swap all hardware with PC from first try (except RAM, Mobo, CPU, CDROM) with no change. Win98 and XP installed fine on the second PC just can't get server 2003
I've been casually looking for a new laptop for my Mom for her first computer. Now I am ready to get one, but just about the only choice is something pre-loaded with Vista. I have no experience with Vista and have heard more bad than good about it, therefore I think it would be easier to get her up and running if we're not both having to learn a new OS.
I upgraded my computer from ME to XP with few problems but wondered how difficult it would be to take a new laptop and go backwards. I know I'd most likely have to purchase a Full version of XP, but how much of a hassel is it to get all the drivers/XP versions of necessary pre-loaded software? Would a Vista compatible version of say Word work if I did this? Any other problems I haven't thought of?
I re-formated my sisters computer yesterday, and after installing it i had no internet. As i hadn't installed any drivers yet, i understood that. But after heading over to dell's site, downloading all of the drivers for her computer and then installing them, i STILL do not have any internet. I don't see any connections on the computer either, it's just blank!
When i tryed installing a new dvd rom on my computer, it installs drivers for a cd rom instead. And when i try to play a dvd r it won't, it will only play cdr's.
I am unable to boot my PC most of the times.Whenever I switch on my PC,I see the following message nine ot of ten times. DiskError/Boot Faliure Reboot and select proper boot device or insert Boot media in selected boot device If I press enter after this messages & keep pressing following messages appear from time to time (Not simultaneously). If just after making the switch on, I press F2 key to check the boot device preference
If just after making the switch on , I press f11 key to reach the boot menu I always find the 1.44 MB Floppy option highlighted as the booting choice.(though there had not been any floppy in the floppy drive, I dont have any really)I make the hard disk option highlighted & it solves the problem only a few times. But next time when I try F11 key to check the boot menu again I find 1.44 MB floppy highlighted.
I haven't installed anything new on my computer but today after having my computer shipped to me via UPS I cut on my computer and where the XP load bar screen was I got: "reboot and select proper boot device or insert boot media in selected boot device".Seeing this I knew I went into the BIOS setup and tried to turn the system priority to look at the HDD. Instead I only had the option of the DVD drive and the CD drive.I have no idea how to solve this problem and don't have any of the recovery CD's. I DO NOT WANT TO REFORMAT because like a bad little boy I did not backup my 4 years worth of work.
first i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
I Installed a 2nd HD and cloned my first HD to it as a backup and would like to be able to dual boot. This is XP Pro. I would like to know what numbers to use in multi, disk, and rdisk.
I have a Windows XP Professional Edition and i incurred a spyware virus on my PC, so i made a dumb decision by running MSCONFIG and changing my SAFEBOOT option, I did this because previously I couldn't even get into Safe Mode, it would load the files on the screen.
I accidentally deleted a partition and later found out that my system is dead....The only way I recover out of that is I reinstall Windows and then install grub again to recover the Linux partition. But I feel the delete partition is a very rapid process just taking seconds and in that I don't think files would be deleted, so I feel potentially I can recover the deleted partitions including the boot partition. But I don't know how to do it. Also now when the boot partition is deleted and the system is not booting up what should be done to recover the system and data?
Recently I was playing a game when my computer froze up, when I restarted it, it froze every time on the Windows XP bootscreen. It boots fine in Safe mode with networking. (I'm typing this post on this computer)
I have a dual boot system (2 hard drives) booting Suse and XP and boot up through Suse's built in boot manager which gives me the option of booting to Windows or Linux. But since I barely ever use Linux I want to delete it off the 2nd drive so I can use it for a storage drive, so I'm wondering how to replace the Windows Master Boot Record so I can just boot into my XP drive. I'm scared that once I delete/reformat the contents of the 2nd hard drive (I'll probably use Partition Magic to do this through my XP drive) that I won't be able to boot XP up anymore. So before I do anything I want to just be able to boot into XP and bypass the linux drive before I delete it to make sure everything is ok.
