I decided to upgrade to Vista today from Windows Xp. Rather than doing the upgrade process, I decided to start off with a fresh format/install.
after the first reboot in the Vista setup process (where Vista attempts to load data from the HDD) the system would just sit there after post as if the Vista loader couldn't properly detect the partition. I currently don't have time to troubleshoot the Vista problem with my system, so in desperation I have tried to go back to XP. I am able to boot into Windows XP setup, format the drive, and copy over the beginning essential files. However, after the system reboots after the initial copy of the data... XP is not capable of booting from the hard drive. this was not a problem before I tried to install Vista.
To check if a problem had occurred with the drive, I installed Ubuntu Linux. Ubuntu is able to boot from the drive without any problems. However....... when Ubuntu loads grub, it detects the following on the MBR: The Vista loader appears to be preventing Windows XP from properly booting from the hard drive. The drive is a Western Digital 320gb. I have 30 gbs set aside for Windows to boot from. The rest of the drive is another partition with files I cannot afford to lose.
I was dual booting XP and Vista but didn't want Vista anymore. So I got rid of Vista, and that's all said and done now. Problem is, the boot loader is still coming up telling me to choose between "Earlier Version of Windows" and "Windows Vista". How to I get rid of it without using Vista's boot manager?
I have a new laptop that came with Windows Vista. I have been trying to load it with Windows XP because Windows Vista didnt work. I am pretty sure a format and clean install will wreck my warranty, hence the dual boot. So far, I have been able to partition and install XP SP-2 to a partition. I've booted into XP fine but my Vista partition is not available. I think that the partition table or MBR has been corrupted.
So to repair this, what I did was boot up from the Vista recovery DVD and run the 'startup repair' option to reload the bootloader for Vista and thus, enable dual booting. When I rebooted I got a black screen saying 'Invalid Partition Table' or something to this effect. I tried repairing the MBR and so on and so forth from the console on the recovery DVD but this proved to be pretty much totally fruitless. So I went through and did an install of Windows XP once again, to my other drive partition I had created. So I am basically where I started.
I managed to create a new partition on my Compaq Presario C700 laptop and install XP. (It came with Vista).First thing I noticed was that I can not detect any wireless networks or connect to the internet now. I am assuming that I need that driver and a whole bunch of other XP drivers as well. I have visited websites where they have a whole laundry list of drivers to download for my situation. Before I go through the painful process of downloading and installing all of them, I want to make sure this is really what I need to do.
I Installed a 2nd HD and cloned my first HD to it as a backup and would like to be able to dual boot. This is XP Pro. I would like to know what numbers to use in multi, disk, and rdisk.
when I edited my boot menu I left off the NoExcute=OptIn at the end of the boot menu line to load my system and was wondering if I can add this now without messing everything up ? I just found out what this option does and looks to me like a have to option. This is on XP Pro.
i have ONE hard drive with partitions. I had a really bad setup first, I had 1 partition with 3 windows installs on it, folders like WINDOWS, WINPRO, WINN, I never took the time to delete them or whatever, and I was using winpro as my main OS. When I was running the above setup, when I boot up it would ask me: Select what OS to load Windows Pro, Windows Home, Windows Home
I decieded to install Windows 7 Ultimate 64 bit, worked flawlessy, but I wanted to go back to windows xp pro 64 bit. So I made a new partition and installed windows XP pro 64 bit onto it. when I tried installing windows xp with my CD, the first part would work fine, but then when it restarted to continue the setup, it would load my MOBO logo and then after, it would just show a blinking underscore "_" on the top left corner, and nothing else.
I managed to install a fresh windows xp from my USB flash drive, but when booting up normally it still does not let me select what OS to log on to, it just shows the blinking underscore in the top left after the MOBO logo passes, I actually have to boot by USB drive to boot this fresh install of windows. I think something is wrong with my boot loader, but have no idea how to fix it.
I'm trying to make a dual boot system Vista/XP with my HP Media Center purchased in 2007 with Vista pre-installed. Inside Vista I created the partition for XP (disk D and rebooted with the 'XP Pro SP2' inside. After selecting its correct partition for installing it copies all files on hard disk and it reboots in order to start its installation, upon rebooting and starting first time from hard disk, it says that there is an error in the system and stops. If I install only XP on the system it works correctly even though some newest hardware is not recognized. I had already made a dual boot two years ago with a 2007 XP Student Edition and it smoothly. If it is due to the XP version being too old that maybe cannot deal with the boot record created by Vista Or perhaps such an old XP cannot recognize a boot hard disk that is not C:? Is there a way to bypass this point (perhaps fixing the boot record) in order to continue correctly the installation? Thank you, Al
my wife deleted her configuration for her boot loader and now we cant get her windows to load i have put her hard drive on my computer to try and reformat but i just cant get it to boot from disk dont know what im doing wrong we have windows xp i have partition magic on my disk and tried to add windows on her disk using this but it dosent recognize the disk
My PC has Windows XP and Linux operating together with GRUB boot loader. I have to reload XP, and when I insert windows OS CD, it encounters GRUB boot loader and hangs.How to reload XP... i.e. how to get past GRUB boot loader.
I installed a beta of Vista just to try it out. I used Partition Magic to create a second partition to run it on. I installed it with no problems and was able to boot between Vista and XP when I needed to switch. When I was done with Vista, I didn't uninstall using Vista's uninstaller. Instead I used Partition Magic to reformat the partition. I've installed Ubuntu on the partition that Vista was on and I like that pretty well. Problem is, when I try to boot into XP, it still thinks that Vista is installed on there and goes through Vista's dual boot prog. When I select XP it loads normally until it gets to the part where it should run autochk. It crashes saying it can't find it (it must be looking for Vista's copy since XP still has its) and I can't do anything except turn the machine off. Point of the story: How do I modify the boot loader on my XP drive? I can still access the infor mation from Ubuntu so if I have to edit something I can.
Is it possible to add a bootable file to the windows boot loader?I want to add a Dell Diagnostics utility. Currently, the only way to access it is with a dos floppy disc, or the windows cd. If so, how is it done?If the above isn't possible, how do I add DOS?
I originally had Vista Business edition on my laptop and decided to dual boot with XP. So far I created a partition on the same drive (C: ) as Vista and installed XP on it. how do I choose between Vista and XP when my computer boots up? When I turn on my computer it boots straight into XP and doesn't show that menu where it gives me a choice of which OS I want to boot
Is it possible to have a Vista based system and then load XP on the same system and switch between the two. I know mac's have something similar to this but i have an HP dv7 pavilion notebook with an AMD Turion x2 Dual-core mobile RM-70 2ghz processor, 4 gb of ram, ATI Radeon HD 3200 graphics chip set, and 156GB of free harddrive space
just ordered a new pc that is on its way pre loaded with WIN XP PRO SP2. It also come with a free VISTA BUSSINES upgrade. I want to set up a dual boot system when i get my VISTA disk. should i use partition magic and set up a new partition for vista or is there a better way of doing this
I initially started with XP and created a separate partition for Vista, installing Vista on the other partition, Vista sees the (XP) Earlier version of windows. When I choose XP, I get the following error: NTOSKRNL.EXE is missing or corrupt. If I repair the XP with fixmbr - I end up screwing up Vista. Then when I repair Vista, it end's screwing up XP
does ne1 know if vista can dual boot with xp no problems yet only wonderin cuz we are very close to vista, and i want it. i cannot use my dorm room internet with vista cuz of bs security shit.
i recently installed linux on my second hard drive but it never worked so my question is how do you turn the boot up menu back to windows instead of grub (i think) its just the hassel of having to go down the list and selecting windows??
I have a fresh install of Win XP on my C: drive and whenever I boot the PC I get options on which windows install to boot into. I had a Win 2000 install on my D: drive at one time but that drive has since been reformatted, so I'm at a loss as to why I have to choose an install at every boot.
I tried to rebuild the boot.ini file using the XP Setup Recovery console but that only added a 3rd option to the list of installs to choose from at boot-up. My question is, can I edit the startup options manually and delete the 2nd and 3rd lines, or is there another way to clean this up so my rig boots to the C: drive automatically every time?
I have a Windows XP PC dedicated to a machine that is constantly sending data via a serial port to the PC. When we power up the system the PC will sometimes think that the serial data coming in is a "new device" and installs it as a serial mouse. When the boot process is complete the PC runs a program from the Startup folder. When this program tries to open the serial port it is blocked by the "serial mouse" it thinks is there.
We have tried many things to prevent this problem. Disabling the mouse in Device Manager works for a while but eventually XP decides there is something wrong and does things like disable the COM port. We have tried disabling the Plug N Play services using MSCONFIG. This does not seem to prevent the detection of the "serial mouse" on boot up. We have a fixed set of hardware and software for this system that will never change. So I'd like to just disable all (or serial) device discovery on boot up. How is this done on XP?
I had XP pro loaded on my boot partition and wanted to get rid of it. I deleted the entire volume D:, but my boot loader menu still lists that OS. Of course it can't boot to it any more, but I don't want to see in the menu at startup. What files are left over from that OS instance that I need to remove?
I had been dual booting XP and Vista. At startup I am given a screen to choose whether to boot from XP or Vista, I think this is the Vista boot manager. Since then I reinstalled XP. Now, I am not getting the boot loader screen at startup so I can choose which OS. Is it something to do with modifying the master boot record? Or do I need a recovery disc or something?
As in the title, im faced with a permanent 7B BSOD stop error message on my pavillion laptop. My current knowledge indicates that is a boot loader error, and as you may naturally expect, i am desperate to fix it! I have tried using the advanced startup options to use the last configurations which worked and safe mode, but i get the same BSOD stop error. I placed my hard disk in another laptop and it boots fine, i have even been able to log in and use it as normal. However, when i put a hard disk running a perfectly fine copy of windows xp home to my pavillion laptop, i get the same 7B stop error.
My pavillion refuses to boot from CDs as well. It seems to me the problem isnt with my hard disk and the OS version on it, but with the remaining components on my laptop...but what could be the criminal? Would anyone be able to shed some light on my problem? Of course, I will provide more details as requested.
I've been casually looking for a new laptop for my Mom for her first computer. Now I am ready to get one, but just about the only choice is something pre-loaded with Vista. I have no experience with Vista and have heard more bad than good about it, therefore I think it would be easier to get her up and running if we're not both having to learn a new OS.
I upgraded my computer from ME to XP with few problems but wondered how difficult it would be to take a new laptop and go backwards. I know I'd most likely have to purchase a Full version of XP, but how much of a hassel is it to get all the drivers/XP versions of necessary pre-loaded software? Would a Vista compatible version of say Word work if I did this? Any other problems I haven't thought of?
I'm currently running Vista on a raid 0 array, and want to dual with XP. I have two partitions, one with vista and the other that I tried installing XP on. After it finishes the initial installation and restarts it says to press any key to boot from the CD. I wait without pressing anything and than it says that there was an error reading the disk. If I remember correctly, after it restarts it goes strait into windows setup. This happens every time I try restarting, but I can get back into vista by putting the hard drive to boot first. In vista I can see the other partition where XP was installed, and inside is just a folder titled WINDOWS and it seems like all the windows files are in there
I have a computer with an 80GB Hard Drive on it. This HDD had XP on a 50GB Partition, and Linux on a 30GB Partition, installed so I can choose between either operating system with Grub when I boot up. Well, I didn't want Linux anymore, so I used Norton Partition Magic to delete the Linux partition. Now, when I boot, GRUB loads and it just says 'unknown filesystem' and then 'GRUB rescue'.Obviously I didn't realize the GRUB started with Linux first, so now I'm screwed and can't boot.
I am in over my head... My big hard drive just came up as a grossly smaller size and I got a message from the OS saying "this drive needs to be formatted."How I got here is kind of long, but bear with me. It started a few months ago with my screen randomly not working when I'd turn on or restart my computer, as if my cable wasn't connected or something. I spent hours and days on forums and help sites trying to figure it out, with the general response that either my crappy motherboard was dying or my video card. D: all my stuff. programs, files, etc. Nothing os'ey so it'd be relatively protected. important.
I, as do most, hate Windows Vista. Even after turning off the UAC and removing components that i found unnecessary, I still found problems. I much prefer Windows XP. Instead of manually removing components, security settings, etc., I decided just to remove Vista itself. I have searched and searched for a forum all over the internet and all i can find are threads about partitioning of about replacing vista on a laptop (which apparently has SATA driver problems or something to that effect). So I was wondering a few things: 1) Is there a way to install XP over Vista directly?
First of all is it worth my time or does vista have too many problems. my main concern is that i do not have the xp disc and if i want to go back to xp should i even bother.i do have the hp recovery tools disc for xp.
I found this forum and it solved the BSOD problem by autodetecting the hard drive. Yay, I finally got the Windows Setup screen. However my keyboard isn't recognized so I can't begin the install. It's a USB and I've tried it in other ports. When I pop out the cd, and start the pc normally, the keyboard works. Windows Vista won't start...I'm guessing because I have to change the drive configuration back to where it was. I really want this Vista gone
