Is it possible to add a bootable file to the windows boot loader?I want to add a Dell Diagnostics utility. Currently, the only way to access it is with a dos floppy disc, or the windows cd. If so, how is it done?If the above isn't possible, how do I add DOS?
View 8 RepliesI have a computer with an 80GB Hard Drive on it. This HDD had XP on a 50GB Partition, and Linux on a 30GB Partition, installed so I can choose between either operating system with Grub when I boot up. Well, I didn't want Linux anymore, so I used Norton Partition Magic to delete the Linux partition. Now, when I boot, GRUB loads and it just says 'unknown filesystem' and then 'GRUB rescue'.Obviously I didn't realize the GRUB started with Linux first, so now I'm screwed and can't boot.
View 9 Replies View RelatedI Installed a 2nd HD and cloned my first HD to it as a backup and would like to be able to dual boot. This is XP Pro. I would like to know what numbers to use in multi, disk, and rdisk.
View 3 Replies View Relatedwhen I edited my boot menu I left off the NoExcute=OptIn at the end of the boot menu line to load my system and was wondering if I can add this now without messing everything up ? I just found out what this option does and looks to me like a have to option. This is on XP Pro.
View 14 Replies View Relatedi have ONE hard drive with partitions. I had a really bad setup first, I had 1 partition with 3 windows installs on it, folders like WINDOWS, WINPRO, WINN, I never took the time to delete them or whatever, and I was using winpro as my main OS. When I was running the above setup, when I boot up it would ask me: Select what OS to load Windows Pro, Windows Home, Windows Home
I decieded to install Windows 7 Ultimate 64 bit, worked flawlessy, but I wanted to go back to windows xp pro 64 bit. So I made a new partition and installed windows XP pro 64 bit onto it. when I tried installing windows xp with my CD, the first part would work fine, but then when it restarted to continue the setup, it would load my MOBO logo and then after, it would just show a blinking underscore "_" on the top left corner, and nothing else.
I managed to install a fresh windows xp from my USB flash drive, but when booting up normally it still does not let me select what OS to log on to, it just shows the blinking underscore in the top left after the MOBO logo passes, I actually have to boot by USB drive to boot this fresh install of windows. I think something is wrong with my boot loader, but have no idea how to fix it.
I have a new laptop that came with Windows Vista. I have been trying to load it with Windows XP because Windows Vista didnt work. I am pretty sure a format and clean install will wreck my warranty, hence the dual boot. So far, I have been able to partition and install XP SP-2 to a partition. I've booted into XP fine but my Vista partition is not available. I think that the partition table or MBR has been corrupted.
So to repair this, what I did was boot up from the Vista recovery DVD and run the 'startup repair' option to reload the bootloader for Vista and thus, enable dual booting. When I rebooted I got a black screen saying 'Invalid Partition Table' or something to this effect. I tried repairing the MBR and so on and so forth from the console on the recovery DVD but this proved to be pretty much totally fruitless. So I went through and did an install of Windows XP once again, to my other drive partition I had created. So I am basically where I started.
my wife deleted her configuration for her boot loader and now we cant get her windows to load i have put her hard drive on my computer to try and reformat but i just cant get it to boot from disk dont know what im doing wrong we have windows xp i have partition magic on my disk and tried to add windows on her disk using this but it dosent recognize the disk
My PC has Windows XP and Linux operating together with GRUB boot loader. I have to reload XP, and when I insert windows OS CD, it encounters GRUB boot loader and hangs.How to reload XP... i.e. how to get past GRUB boot loader.
View 1 Replies View RelatedI installed a beta of Vista just to try it out. I used Partition Magic to create a second partition to run it on. I installed it with no problems and was able to boot between Vista and XP when I needed to switch. When I was done with Vista, I didn't uninstall using Vista's uninstaller. Instead I used Partition Magic to reformat the partition. I've installed Ubuntu on the partition that Vista was on and I like that pretty well. Problem is, when I try to boot into XP, it still thinks that Vista is installed on there and goes through Vista's dual boot prog. When I select XP it loads normally until it gets to the part where it should run autochk. It crashes saying it can't find it (it must be looking for Vista's copy since XP still has its) and I can't do anything except turn the machine off. Point of the story: How do I modify the boot loader on my XP drive? I can still access the infor mation from Ubuntu so if I have to edit something I can.
View 6 Replies View Relatedi recently installed linux on my second hard drive but it never worked so my question is how do you turn the boot up menu back to windows instead of grub (i think) its just the hassel of having to go down the list and selecting windows??
I have a fresh install of Win XP on my C: drive and whenever I boot the PC I get options on which windows install to boot into. I had a Win 2000 install on my D: drive at one time but that drive has since been reformatted, so I'm at a loss as to why I have to choose an install at every boot.
I tried to rebuild the boot.ini file using the XP Setup Recovery console but that only added a 3rd option to the list of installs to choose from at boot-up.
My question is, can I edit the startup options manually and delete the 2nd and 3rd lines, or is there another way to clean this up so my rig boots to the C: drive automatically every time?
I decided to upgrade to Vista today from Windows Xp. Rather than doing the upgrade process, I decided to start off with a fresh format/install.
after the first reboot in the Vista setup process (where Vista attempts to load data from the HDD) the system would just sit there after post as if the Vista loader couldn't properly detect the partition. I currently don't have time to troubleshoot the Vista problem with my system, so in desperation I have tried to go back to XP. I am able to boot into Windows XP setup, format the drive, and copy over the beginning essential files. However, after the system reboots after the initial copy of the data... XP is not capable of booting from the hard drive. this was not a problem before I tried to install Vista.
To check if a problem had occurred with the drive, I installed Ubuntu Linux. Ubuntu is able to boot from the drive without any problems. However....... when Ubuntu loads grub, it detects the following on the MBR: The Vista loader appears to be preventing Windows XP from properly booting from the hard drive. The drive is a Western Digital 320gb. I have 30 gbs set aside for Windows to boot from. The rest of the drive is another partition with files I cannot afford to lose.
I had XP pro loaded on my boot partition and wanted to get rid of it. I deleted the entire volume D:, but my boot loader menu still lists that OS. Of course it can't boot to it any more, but I don't want to see in the menu at startup. What files are left over from that OS instance that I need to remove?
View 5 Replies View RelatedI had been dual booting XP and Vista. At startup I am given a screen to choose whether to boot from XP or Vista, I think this is the Vista boot manager. Since then I reinstalled XP. Now, I am not getting the boot loader screen at startup so I can choose which OS. Is it something to do with modifying the master boot record? Or do I need a recovery disc or something?
View 3 Replies View RelatedAs in the title, im faced with a permanent 7B BSOD stop error message on my pavillion laptop. My current knowledge indicates that is a boot loader error, and as you may naturally expect, i am desperate to fix it! I have tried using the advanced startup options to use the last configurations which worked and safe mode, but i get the same BSOD stop error. I placed my hard disk in another laptop and it boots fine, i have even been able to log in and use it as normal. However, when i put a hard disk running a perfectly fine copy of windows xp home to my pavillion laptop, i get the same 7B stop error.
My pavillion refuses to boot from CDs as well. It seems to me the problem isnt with my hard disk and the OS version on it, but with the remaining components on my laptop...but what could be the criminal? Would anyone be able to shed some light on my problem? Of course, I will provide more details as requested.
I cannot boot windows, I think my boot file is corrupt and would like to know if I can use a boot cd instead of a floppy.I would appreciate it if someone could tell me what i need to do.
View 3 Replies View Relatedwhen I try to power on my Inspiron B120 laptop, it takes me to the System Administrator password. I enter that then it simply shows the text "no bootable devices, strike F1 to retry boot, F2 for setup utility" if I press F1 it simply repeats the same text Setup utility is no help.
I hit F12 once when first powering on the computer and went into the boot menu
I ran the "Pre-Boot Sytem Assesment Build 3020"
When it ran through that test everything 'passed' the tests, but in the 'DST status test' it failed and stated that no hard drive was detected.
I haven't downloaded anything maliscious, or dropped my computer. What happened to my hard drive? and is there anything I can do now to get it up and running again?
I have 5 or 6 different bootable floppy drives, partition magic, norton ghost, etc. I want to make them all bootable off a single CD, thumbdrive, etc. with a simple multimenu in dos. I've created the bootable thumb drive, and I've messed with the [menu] commands and such, but I can't get it to work. Is there a way to make a simple boot option to say, use this config.sys and this autoexec.bat?
View 2 Replies View RelatedI got a computer to repair. This is the problem 'Unmountable Boot Volume'. Unfortunatelly any chckdsk from bootable Windows not working. I mean stoped at 46% few hours. I also tryed connect to another computer and run some tools, but same result. I'am allowed to open all data on disk, but can't recover system.
View 7 Replies View RelatedA friend wanted to remove the FAT32 Win98 partition and leave his XP NTFS partition as the boot partition. He has used PM7 to delete the FAT32 partitin and move the NTFS t the front of the disk. However, it now does not boot. FIXMBR and FIXBOOT (from the Recovery console) looked as if they were fixing things but it still does not boot ("Invalid System Disk...").
View 3 Replies View RelatedI went to try to install windows xp onto a computer that already had windows on it. I did not boot from the cd. To do it without using the cd it has to copy the installation files to the computer and then run them. When setup does this it creates a new choice of an operating system to boot from called "Windows XP Setup." So now I have a Windows XP and a Windows XP setup. I've been in msconfig and looked at boot.ini but that didn't help
View 8 Replies View Relatedi rescently had to format the drive for a fresh copy. I have installed xp home retail version and realised i wanted to try something diferent. At system start the computer starts up prior to the windows boot screen and displays COMPAQ in big bright bold letters with option of F10 for system restore which is no longer on system (reformated) as well as other options for boot select pres ESC and F1 for setup.Can i remove this from my system? and then can i create a menu with 2 options 1 load windows normaly and 2 install a disk image stored on a hidden partition? maybe like the F10 key assighn that to access the imge and install it.
I'm trying to dual boot 2 different installs of xp pro from 2 drives using the Windows boot loader. I've edited the boot.ini every possible way I can think of, but nothing works. I've done this plenty of times using a linux boot loader or dual booting from a single drive but I cant figure this out. I haven't been able to find any reference to this subject anywhere, but I think it would work. Anybody have a clue as to how to do this? I know I can use a different boot manager to accomplish this, I just wanted to make the Win boot.ini work. Or, does anybody know of a good boot manager if I cant make this work?
View 9 Replies View RelatedI format windows 98 with win98 startup disk and windows XP was installed. every start the pc,it prompt two boot loader for option.windoes 98 or windows XP. How to delete the window 98 option on the boot loader screen because windows 98 had been formated.
I was dual booting XP and Vista but didn't want Vista anymore. So I got rid of Vista, and that's all said and done now. Problem is, the boot loader is still coming up telling me to choose between "Earlier Version of Windows" and "Windows Vista". How to I get rid of it without using Vista's boot manager?
View 6 Replies View Relatedi have a windows xp2 boot able cd.recently i downloaded an executable of sp3 from the windows site..
around 6 months ago..my friend told me a way to extract the boot file from the disc n copy it using nero to make a bootable sp3 cd. i had one but i lost it.and now i dont remember how to do it again.
PC wont boot up any more , it says there could be a currupt or missing file , it says its config system and says it might be able to repair the file using the install disc. i have a System Recovery CD-ROM
View 1 Replies View Relateda while ago my computer failed to boot repeatedly and I took it to the repair man who got it going but when I first switch it on I get the message invalide boot.ini file - booting from c and what has happened to create this problem and can I restore my PC to boot from the original file
View 1 Replies View RelatedOn my xp machine i get an unmountable boot volume error. Which says my boot.ini file may be corrupted. So im attempting to reformat but even with my xp disk in i still get the same error followed by a choice to restore previous settings, and two other choices which all end in a blue screen.Does the hard drive need to be or Is there anyway i can boot up in dos to reformat?
View 3 Replies View RelatedGetting unknown Error: loader couldn't initialize?
View 7 Replies View RelatedPlaying on pogo and I keep getting a message saying CTF Loader error occured. It also pops up when I open a new page.
View 7 Replies View Related