My PC has Windows XP and Linux operating together with GRUB boot loader. I have to reload XP, and when I insert windows OS CD, it encounters GRUB boot loader and hangs.How to reload XP... i.e. how to get past GRUB boot loader.
View 1 RepliesI have a computer with an 80GB Hard Drive on it. This HDD had XP on a 50GB Partition, and Linux on a 30GB Partition, installed so I can choose between either operating system with Grub when I boot up. Well, I didn't want Linux anymore, so I used Norton Partition Magic to delete the Linux partition. Now, when I boot, GRUB loads and it just says 'unknown filesystem' and then 'GRUB rescue'.Obviously I didn't realize the GRUB started with Linux first, so now I'm screwed and can't boot.
View 9 Replies View RelatedI accidentally deleted a partition and later found out that my system is dead....The only way I recover out of that is I reinstall Windows and then install grub again to recover the Linux partition. But I feel the delete partition is a very rapid process just taking seconds and in that I don't think files would be deleted, so I feel potentially I can recover the deleted partitions including the boot partition. But I don't know how to do it. Also now when the boot partition is deleted and the system is not booting up what should be done to recover the system and data?
View 5 Replies View RelatedI had to re-install the boot manager GRUB Now, Windows does not boot no more and even worse I cannot even boot from CD either (-> recovery console)"Examining your hardware." flashes shortly and then the screen turns black and that's it. I think a fixmbr may help but since I cannot boot from CD. it's a notebook and I have a recovery partition at the beginning of the hard drive.
View 14 Replies View Relatedhow do i make windows "2000/nt/xp loader" the default choice on the grub 1.5 boot loader? i have 4 other choices and windows is at the bottom. i have ubuntu 9.04 and it's recovery (i have 2 sets of thse but they do the same thing). it automatically loads ubuntu 9.04 after a few seconds. How can i make it choose windows by default and maybe even decrease the timeout? (i'm willing to do this inside windows or ubuntu if needed i cannot do this from within grub).
View 1 Replies View RelatedI am trying to reload XP on a sony Vaio machine. First off, when it comes up with 'press any key to boot to CD' nothing works. I have done searches on this and have tried both PS2 and usb keyboards. I have also tried to access bios but nothing loads it.I have tried esc, tab, del, f1-f12 and no matter what, windows continues to load. I know the keyboard works because once windows loads, I can type. So this is an issue with the usb keyboard and bios I assume but I cannot get to bios to enable the usb support.
View 9 Replies View RelatedI Installed a 2nd HD and cloned my first HD to it as a backup and would like to be able to dual boot. This is XP Pro. I would like to know what numbers to use in multi, disk, and rdisk.
View 3 Replies View Relatedwhen I edited my boot menu I left off the NoExcute=OptIn at the end of the boot menu line to load my system and was wondering if I can add this now without messing everything up ? I just found out what this option does and looks to me like a have to option. This is on XP Pro.
View 14 Replies View Relatedi have ONE hard drive with partitions. I had a really bad setup first, I had 1 partition with 3 windows installs on it, folders like WINDOWS, WINPRO, WINN, I never took the time to delete them or whatever, and I was using winpro as my main OS. When I was running the above setup, when I boot up it would ask me: Select what OS to load Windows Pro, Windows Home, Windows Home
I decieded to install Windows 7 Ultimate 64 bit, worked flawlessy, but I wanted to go back to windows xp pro 64 bit. So I made a new partition and installed windows XP pro 64 bit onto it. when I tried installing windows xp with my CD, the first part would work fine, but then when it restarted to continue the setup, it would load my MOBO logo and then after, it would just show a blinking underscore "_" on the top left corner, and nothing else.
I managed to install a fresh windows xp from my USB flash drive, but when booting up normally it still does not let me select what OS to log on to, it just shows the blinking underscore in the top left after the MOBO logo passes, I actually have to boot by USB drive to boot this fresh install of windows. I think something is wrong with my boot loader, but have no idea how to fix it.
I have a new laptop that came with Windows Vista. I have been trying to load it with Windows XP because Windows Vista didnt work. I am pretty sure a format and clean install will wreck my warranty, hence the dual boot. So far, I have been able to partition and install XP SP-2 to a partition. I've booted into XP fine but my Vista partition is not available. I think that the partition table or MBR has been corrupted.
So to repair this, what I did was boot up from the Vista recovery DVD and run the 'startup repair' option to reload the bootloader for Vista and thus, enable dual booting. When I rebooted I got a black screen saying 'Invalid Partition Table' or something to this effect. I tried repairing the MBR and so on and so forth from the console on the recovery DVD but this proved to be pretty much totally fruitless. So I went through and did an install of Windows XP once again, to my other drive partition I had created. So I am basically where I started.
my wife deleted her configuration for her boot loader and now we cant get her windows to load i have put her hard drive on my computer to try and reformat but i just cant get it to boot from disk dont know what im doing wrong we have windows xp i have partition magic on my disk and tried to add windows on her disk using this but it dosent recognize the disk
I installed a beta of Vista just to try it out. I used Partition Magic to create a second partition to run it on. I installed it with no problems and was able to boot between Vista and XP when I needed to switch. When I was done with Vista, I didn't uninstall using Vista's uninstaller. Instead I used Partition Magic to reformat the partition. I've installed Ubuntu on the partition that Vista was on and I like that pretty well. Problem is, when I try to boot into XP, it still thinks that Vista is installed on there and goes through Vista's dual boot prog. When I select XP it loads normally until it gets to the part where it should run autochk. It crashes saying it can't find it (it must be looking for Vista's copy since XP still has its) and I can't do anything except turn the machine off. Point of the story: How do I modify the boot loader on my XP drive? I can still access the infor mation from Ubuntu so if I have to edit something I can.
View 6 Replies View RelatedIs it possible to add a bootable file to the windows boot loader?I want to add a Dell Diagnostics utility. Currently, the only way to access it is with a dos floppy disc, or the windows cd. If so, how is it done?If the above isn't possible, how do I add DOS?
View 8 Replies View Relatedi recently installed linux on my second hard drive but it never worked so my question is how do you turn the boot up menu back to windows instead of grub (i think) its just the hassel of having to go down the list and selecting windows??
I have a fresh install of Win XP on my C: drive and whenever I boot the PC I get options on which windows install to boot into. I had a Win 2000 install on my D: drive at one time but that drive has since been reformatted, so I'm at a loss as to why I have to choose an install at every boot.
I tried to rebuild the boot.ini file using the XP Setup Recovery console but that only added a 3rd option to the list of installs to choose from at boot-up.
My question is, can I edit the startup options manually and delete the 2nd and 3rd lines, or is there another way to clean this up so my rig boots to the C: drive automatically every time?
I decided to upgrade to Vista today from Windows Xp. Rather than doing the upgrade process, I decided to start off with a fresh format/install.
after the first reboot in the Vista setup process (where Vista attempts to load data from the HDD) the system would just sit there after post as if the Vista loader couldn't properly detect the partition. I currently don't have time to troubleshoot the Vista problem with my system, so in desperation I have tried to go back to XP. I am able to boot into Windows XP setup, format the drive, and copy over the beginning essential files. However, after the system reboots after the initial copy of the data... XP is not capable of booting from the hard drive. this was not a problem before I tried to install Vista.
To check if a problem had occurred with the drive, I installed Ubuntu Linux. Ubuntu is able to boot from the drive without any problems. However....... when Ubuntu loads grub, it detects the following on the MBR: The Vista loader appears to be preventing Windows XP from properly booting from the hard drive. The drive is a Western Digital 320gb. I have 30 gbs set aside for Windows to boot from. The rest of the drive is another partition with files I cannot afford to lose.
I had XP pro loaded on my boot partition and wanted to get rid of it. I deleted the entire volume D:, but my boot loader menu still lists that OS. Of course it can't boot to it any more, but I don't want to see in the menu at startup. What files are left over from that OS instance that I need to remove?
View 5 Replies View RelatedI had been dual booting XP and Vista. At startup I am given a screen to choose whether to boot from XP or Vista, I think this is the Vista boot manager. Since then I reinstalled XP. Now, I am not getting the boot loader screen at startup so I can choose which OS. Is it something to do with modifying the master boot record? Or do I need a recovery disc or something?
View 3 Replies View RelatedAs in the title, im faced with a permanent 7B BSOD stop error message on my pavillion laptop. My current knowledge indicates that is a boot loader error, and as you may naturally expect, i am desperate to fix it! I have tried using the advanced startup options to use the last configurations which worked and safe mode, but i get the same BSOD stop error. I placed my hard disk in another laptop and it boots fine, i have even been able to log in and use it as normal. However, when i put a hard disk running a perfectly fine copy of windows xp home to my pavillion laptop, i get the same 7B stop error.
My pavillion refuses to boot from CDs as well. It seems to me the problem isnt with my hard disk and the OS version on it, but with the remaining components on my laptop...but what could be the criminal? Would anyone be able to shed some light on my problem? Of course, I will provide more details as requested.
I went to try to install windows xp onto a computer that already had windows on it. I did not boot from the cd. To do it without using the cd it has to copy the installation files to the computer and then run them. When setup does this it creates a new choice of an operating system to boot from called "Windows XP Setup." So now I have a Windows XP and a Windows XP setup. I've been in msconfig and looked at boot.ini but that didn't help
View 8 Replies View Relatedi rescently had to format the drive for a fresh copy. I have installed xp home retail version and realised i wanted to try something diferent. At system start the computer starts up prior to the windows boot screen and displays COMPAQ in big bright bold letters with option of F10 for system restore which is no longer on system (reformated) as well as other options for boot select pres ESC and F1 for setup.Can i remove this from my system? and then can i create a menu with 2 options 1 load windows normaly and 2 install a disk image stored on a hidden partition? maybe like the F10 key assighn that to access the imge and install it.
I'm trying to dual boot 2 different installs of xp pro from 2 drives using the Windows boot loader. I've edited the boot.ini every possible way I can think of, but nothing works. I've done this plenty of times using a linux boot loader or dual booting from a single drive but I cant figure this out. I haven't been able to find any reference to this subject anywhere, but I think it would work. Anybody have a clue as to how to do this? I know I can use a different boot manager to accomplish this, I just wanted to make the Win boot.ini work. Or, does anybody know of a good boot manager if I cant make this work?
View 9 Replies View RelatedI format windows 98 with win98 startup disk and windows XP was installed. every start the pc,it prompt two boot loader for option.windoes 98 or windows XP. How to delete the window 98 option on the boot loader screen because windows 98 had been formated.
I was dual booting XP and Vista but didn't want Vista anymore. So I got rid of Vista, and that's all said and done now. Problem is, the boot loader is still coming up telling me to choose between "Earlier Version of Windows" and "Windows Vista". How to I get rid of it without using Vista's boot manager?
View 6 Replies View RelatedI have a problem with a Windows XP installation. The problem arose when I attached a SATA SSD with Windows 7 on it, intending to check whether the SSD had failed. The computer booted up into XP but I couldn't see the SSD in My Computer. When I restarted the computer, I received GRUB (the Linux bootloader) error 22. It is possible that Linux was active on the Windows XP HDD at some point, but it is long gone and I didn't expect to find GRUB controlling the boot. I switched off and removed the SSD drive so that the computer would, so I thought, be in the state in which it was when I approached it. I switched it on and got to GRUB error 21. I inserted my Windows XP CD-ROM and restarted, selecting the repair option. I ran CHKDSK, FIXBOOT and FIXMBR and restarted but now I get error INVALID SYSTEM DISK. INSERT SYSTEM DISK AND PRESS ENTER.
View 5 Replies View RelatedDespite specifically telling it not to, Kubuntu Linux installed the Grub bootloader.
How can I get rid of this and gett back to the original Windows MBR? I want to use the program bootpart to write the boot.ini, which is done through Windows.
My daughters computer is giving me a Grub hard disc error message everytime I try to boot up the pc, and now the pc will not start up past this error message. I tried rebooting a few times but it just kept giving me this error and then would not go further.
View 14 Replies View RelatedI've backed myself into a corner, now I need to pick your brains to get out of it.
OS is XP Home sp2. Stopped booting,with error message about missing files,e.g.windowssystem32cp_437.nls.
Repair did not work, so I ended up reinstalling XP, but in another folder, as I didn't want to lose settings etc.
In "windows2", when I try to enter My Docs., etc on "windows1" it says
"access denied". How do I get at "favourites, Docs etc on "windows1" I have heaps of genealogy files etc that I cant access.
This is symbol is showing instead of my line but to the left.Error loading C;windowsNVMCTRAY.DLL This specified module could not be found. After reloading Windows XP on a Dell optiplex GX270.
View 2 Replies View RelatedHad to format my hd, XP home edition was preloaded, only have a reload disc which does not sem to reload!I have the serial number for the XP which was loaded originally.What can I do? I tried to load XP pro from a system disk, it goes so far then stops.
View 13 Replies View RelatedI have a Dell XPS Gen 2 computer (3.2 GHz P4) in which I was running a striped RAID array (2x250). It had worked fine for about a year, when one of the drives failed (the original that came with the computer) so I thought it would be a good time to upgrade and change configuration, so I installed 2 new Western Digital SATA drives (500 GB). The computer recognized the drives and let me create a mirrored array, so I started reloading Windows. When I got to the F6 part I put in the floppy disk with the RAID drivers and now I keep getting this error messag The only other thing I've done to the computer recently was upgrade from 2 GB of RAM to 4 GB, but everything was working for at least a month before this happened so I assume it's unrelated.
View 6 Replies View Related