I had XP pro loaded on my boot partition and wanted to get rid of it. I deleted the entire volume D:, but my boot loader menu still lists that OS. Of course it can't boot to it any more, but I don't want to see in the menu at startup. What files are left over from that OS instance that I need to remove?
View 5 Replieswhen I edited my boot menu I left off the NoExcute=OptIn at the end of the boot menu line to load my system and was wondering if I can add this now without messing everything up ? I just found out what this option does and looks to me like a have to option. This is on XP Pro.
View 14 Replies View RelatedI went to try to install windows xp onto a computer that already had windows on it. I did not boot from the cd. To do it without using the cd it has to copy the installation files to the computer and then run them. When setup does this it creates a new choice of an operating system to boot from called "Windows XP Setup." So now I have a Windows XP and a Windows XP setup. I've been in msconfig and looked at boot.ini but that didn't help
View 8 Replies View RelatedI installed a beta of Vista just to try it out. I used Partition Magic to create a second partition to run it on. I installed it with no problems and was able to boot between Vista and XP when I needed to switch. When I was done with Vista, I didn't uninstall using Vista's uninstaller. Instead I used Partition Magic to reformat the partition. I've installed Ubuntu on the partition that Vista was on and I like that pretty well. Problem is, when I try to boot into XP, it still thinks that Vista is installed on there and goes through Vista's dual boot prog. When I select XP it loads normally until it gets to the part where it should run autochk. It crashes saying it can't find it (it must be looking for Vista's copy since XP still has its) and I can't do anything except turn the machine off. Point of the story: How do I modify the boot loader on my XP drive? I can still access the infor mation from Ubuntu so if I have to edit something I can.
View 6 Replies View RelatedI have a fresh install of Win XP on my C: drive and whenever I boot the PC I get options on which windows install to boot into. I had a Win 2000 install on my D: drive at one time but that drive has since been reformatted, so I'm at a loss as to why I have to choose an install at every boot.
I tried to rebuild the boot.ini file using the XP Setup Recovery console but that only added a 3rd option to the list of installs to choose from at boot-up.
My question is, can I edit the startup options manually and delete the 2nd and 3rd lines, or is there another way to clean this up so my rig boots to the C: drive automatically every time?
So when I boot my PC, I am asked to choose between booting up XP Home and XP Pro. The OS I want is XP Pro, and when I choose it, everything works perfectly. I would just like to know how to remove the XP Home option from the startup prompt.
View 6 Replies View Relatedi recently wanted to installed a few windows components from the windows xp installation cd. during the install i cancelled it. but the next day when i booted up the pc i got two options in the boot menu. It asked wether i wanted to boot "windows xp home edition" or "windows xp setup" How do i get rid of this "windows xp setup" boot option?
I'm trying to dual boot 2 different installs of xp pro from 2 drives using the Windows boot loader. I've edited the boot.ini every possible way I can think of, but nothing works. I've done this plenty of times using a linux boot loader or dual booting from a single drive but I cant figure this out. I haven't been able to find any reference to this subject anywhere, but I think it would work. Anybody have a clue as to how to do this? I know I can use a different boot manager to accomplish this, I just wanted to make the Win boot.ini work. Or, does anybody know of a good boot manager if I cant make this work?
View 9 Replies View RelatedI need to format my harddrive and re-install XP pro, but I don't know how to do it, do someone out there know where to find an easy guide to boot from CD. Cause it would be nice with a print so I can format my computer step by step. I'm not so brainy when dealing with BIOS.
View 3 Replies View RelatedI Installed a 2nd HD and cloned my first HD to it as a backup and would like to be able to dual boot. This is XP Pro. I would like to know what numbers to use in multi, disk, and rdisk.
View 3 Replies View RelatedI have installed 2 different operating systems (xp and vista) on my hard drive on seperate partitions without flagging 1 of them to boot (aka it doesnt boot at all.) I want to completely format the hole thing and just put xp on the 1 hard drive with no partitions.
My problem is that my computers CD drive has broken and it does not have a floppy drive, I want to know if theres any way i can boot a program from a USB flash drive to completely format both partitions so i can install xp (I already know how to boot xp off a USB flash drive.
I am trying to format my PC as it has been affected by Spyware and malware.
I set CD-Rom as boot option but when PC reboots it do not start formatting irrespective of presence or absence of CD in CD-Rom. Similar thing also happened when I set this option for Floppy Drive. How Can I resolve this problem.
I have formatted PC once before the CD I have with me. But now I want to make new bootable CD. Can you please suggest me the procedure and resources to get (software/program) to be included in CD from Internet (freeware program). So that the CD will format the drive cleanly and clearly. It should format C (program file drive) and other drive like D, E F.
i have ONE hard drive with partitions. I had a really bad setup first, I had 1 partition with 3 windows installs on it, folders like WINDOWS, WINPRO, WINN, I never took the time to delete them or whatever, and I was using winpro as my main OS. When I was running the above setup, when I boot up it would ask me: Select what OS to load Windows Pro, Windows Home, Windows Home
I decieded to install Windows 7 Ultimate 64 bit, worked flawlessy, but I wanted to go back to windows xp pro 64 bit. So I made a new partition and installed windows XP pro 64 bit onto it. when I tried installing windows xp with my CD, the first part would work fine, but then when it restarted to continue the setup, it would load my MOBO logo and then after, it would just show a blinking underscore "_" on the top left corner, and nothing else.
I managed to install a fresh windows xp from my USB flash drive, but when booting up normally it still does not let me select what OS to log on to, it just shows the blinking underscore in the top left after the MOBO logo passes, I actually have to boot by USB drive to boot this fresh install of windows. I think something is wrong with my boot loader, but have no idea how to fix it.
I have a new laptop that came with Windows Vista. I have been trying to load it with Windows XP because Windows Vista didnt work. I am pretty sure a format and clean install will wreck my warranty, hence the dual boot. So far, I have been able to partition and install XP SP-2 to a partition. I've booted into XP fine but my Vista partition is not available. I think that the partition table or MBR has been corrupted.
So to repair this, what I did was boot up from the Vista recovery DVD and run the 'startup repair' option to reload the bootloader for Vista and thus, enable dual booting. When I rebooted I got a black screen saying 'Invalid Partition Table' or something to this effect. I tried repairing the MBR and so on and so forth from the console on the recovery DVD but this proved to be pretty much totally fruitless. So I went through and did an install of Windows XP once again, to my other drive partition I had created. So I am basically where I started.
my wife deleted her configuration for her boot loader and now we cant get her windows to load i have put her hard drive on my computer to try and reformat but i just cant get it to boot from disk dont know what im doing wrong we have windows xp i have partition magic on my disk and tried to add windows on her disk using this but it dosent recognize the disk
My PC has Windows XP and Linux operating together with GRUB boot loader. I have to reload XP, and when I insert windows OS CD, it encounters GRUB boot loader and hangs.How to reload XP... i.e. how to get past GRUB boot loader.
View 1 Replies View RelatedIs it possible to add a bootable file to the windows boot loader?I want to add a Dell Diagnostics utility. Currently, the only way to access it is with a dos floppy disc, or the windows cd. If so, how is it done?If the above isn't possible, how do I add DOS?
View 8 Replies View Relatedi recently installed linux on my second hard drive but it never worked so my question is how do you turn the boot up menu back to windows instead of grub (i think) its just the hassel of having to go down the list and selecting windows??
I decided to upgrade to Vista today from Windows Xp. Rather than doing the upgrade process, I decided to start off with a fresh format/install.
after the first reboot in the Vista setup process (where Vista attempts to load data from the HDD) the system would just sit there after post as if the Vista loader couldn't properly detect the partition. I currently don't have time to troubleshoot the Vista problem with my system, so in desperation I have tried to go back to XP. I am able to boot into Windows XP setup, format the drive, and copy over the beginning essential files. However, after the system reboots after the initial copy of the data... XP is not capable of booting from the hard drive. this was not a problem before I tried to install Vista.
To check if a problem had occurred with the drive, I installed Ubuntu Linux. Ubuntu is able to boot from the drive without any problems. However....... when Ubuntu loads grub, it detects the following on the MBR: The Vista loader appears to be preventing Windows XP from properly booting from the hard drive. The drive is a Western Digital 320gb. I have 30 gbs set aside for Windows to boot from. The rest of the drive is another partition with files I cannot afford to lose.
I had been dual booting XP and Vista. At startup I am given a screen to choose whether to boot from XP or Vista, I think this is the Vista boot manager. Since then I reinstalled XP. Now, I am not getting the boot loader screen at startup so I can choose which OS. Is it something to do with modifying the master boot record? Or do I need a recovery disc or something?
View 3 Replies View RelatedAs in the title, im faced with a permanent 7B BSOD stop error message on my pavillion laptop. My current knowledge indicates that is a boot loader error, and as you may naturally expect, i am desperate to fix it! I have tried using the advanced startup options to use the last configurations which worked and safe mode, but i get the same BSOD stop error. I placed my hard disk in another laptop and it boots fine, i have even been able to log in and use it as normal. However, when i put a hard disk running a perfectly fine copy of windows xp home to my pavillion laptop, i get the same 7B stop error.
My pavillion refuses to boot from CDs as well. It seems to me the problem isnt with my hard disk and the OS version on it, but with the remaining components on my laptop...but what could be the criminal? Would anyone be able to shed some light on my problem? Of course, I will provide more details as requested.
I need to get my HDD reformatted with the help of a paid technician.Couple of weeks ago he used the quick format method & asked him if that would make any difference & he said really not.I have the doubts though. I kind of wonder why would Windows then give a choice if there really wasn’t any difference?
View 12 Replies View RelatedI have a new Toshiba satellite A105-S4084, with an Intel centrino duo. I want to remove a "Buy toshiba.com" icon from the start menu. How can I do this? It's easier to remove windows icons.
View 4 Replies View RelatedI have a computer with an 80GB Hard Drive on it. This HDD had XP on a 50GB Partition, and Linux on a 30GB Partition, installed so I can choose between either operating system with Grub when I boot up. Well, I didn't want Linux anymore, so I used Norton Partition Magic to delete the Linux partition. Now, when I boot, GRUB loads and it just says 'unknown filesystem' and then 'GRUB rescue'.Obviously I didn't realize the GRUB started with Linux first, so now I'm screwed and can't boot.
View 9 Replies View Relatedhow to delete an item from the right click shortcut menu that opens up when you right click on a program icon? It seems that sometimes when I install a new program, the new program takes it upon itself to stick an option in this menu. It's getting quite lengthy and most of them I have no use for. I would like to clean it up if there is an easy way short of going into the registry.
View 2 Replies View Relatedthere is a way of removing some of the right click context menu with the help of TweakUI.
I recently purchases a Toshiba Satellite laptop. I use an older version of Magic Tweak, and tweaked most everything I want. One this I can't get rid of is an item on the Start Menu "Buy From Toshiba Direct". It's located directly above the shutdown dialogue in it's own little category, below the Run button. There's no options I can find to remove this.
View 7 Replies View RelatedSince I have installed a few new drivers/Software I have been having trouble with my desktop right click menu, the apps I've installed have added 3 new items on this menu and they take ages to load, even though they are not really that necessary and can be accessed without right clicking. I have taken a screen-shot and wondered if there is any way of removing the 3 marked items from my right click menu.
View 2 Replies View RelatedI've got left over start menu items that no longer link to a program. How can I get rid of these? Are there any simple apps that find these and remove them?
View 2 Replies View RelatedWhen I boot WinXP it goes to the screen that asks you to select which use to log in as. I am the only user on my PC. Is there a way to get rid of that so Windows will just boot up automatically?
View 1 Replies View RelatedI have a dual boot environment with two Win XP installed on different disks, XP1 and XP2 . XP1 was installed first and contains the boot files (NTLDR, boot.ini...) and XP2 came second. Now, I would like to keep XP2 and get rid of XP1. How can i delete XP1 since it contains the boot files? if i delete XP1 i am afraid to not be able to boot on XP2.
View 14 Replies View Related