I originally had Vista Business edition on my laptop and decided to dual boot with XP. So far I created a partition on the same drive (C: ) as Vista and installed XP on it. how do I choose between Vista and XP when my computer boots up? When I turn on my computer it boots straight into XP and doesn't show that menu where it gives me a choice of which OS I want to boot
View 1 RepliesI'm trying to make a dual boot system Vista/XP with my HP Media Center purchased in 2007 with Vista pre-installed. Inside Vista I created the partition for XP (disk D and rebooted with the 'XP Pro SP2' inside. After selecting its correct partition for installing it copies all files on hard disk and it reboots in order to start its installation, upon rebooting and starting first time from hard disk, it says that there is an error in the system and stops. If I install only XP on the system it works correctly even though some newest hardware is not recognized. I had already made a dual boot two years ago with a 2007 XP Student Edition and it smoothly. If it is due to the XP version being too old that maybe cannot deal with the boot record created by Vista
Or perhaps such an old XP cannot recognize a boot hard disk that is not C:?
Is there a way to bypass this point (perhaps fixing the boot record) in order to continue correctly the installation?
Thank you,
Al
Can i put Vista on a computer as a second operating system and dual boot with XP? Is there a risk of Vista interfering with the XP partition
View 2 Replies View RelatedIs it possible to have a Vista based system and then load XP on the same system and switch between the two. I know mac's have something similar to this but i have an HP dv7 pavilion notebook with an AMD Turion x2 Dual-core mobile RM-70 2ghz processor, 4 gb of ram, ATI Radeon HD 3200 graphics chip set, and 156GB of free harddrive space
View 7 Replies View Relatedjust ordered a new pc that is on its way pre loaded with WIN XP PRO SP2. It also come with a free VISTA BUSSINES upgrade. I want to set up a dual boot system when i get my VISTA disk. should i use partition magic and set up a new partition for vista or is there a better way of doing this
View 2 Replies View RelatedI initially started with XP and created a separate partition for Vista, installing Vista on the other partition, Vista sees the (XP) Earlier version of windows. When I choose XP, I get the following error: NTOSKRNL.EXE is missing or corrupt. If I repair the XP with fixmbr - I end up screwing up Vista. Then when I repair Vista, it end's screwing up XP
View 3 Replies View Relateddoes ne1 know if vista can dual boot with xp no problems yet only wonderin cuz we are very close to vista, and i want it. i cannot use my dorm room internet with vista cuz of bs security shit.
View 1 Replies View RelatedI'm currently running Vista on a raid 0 array, and want to dual with XP. I have two partitions, one with vista and the other that I tried installing XP on. After it finishes the initial installation and restarts it says to press any key to boot from the CD. I wait without pressing anything and than it says that there was an error reading the disk. If I remember correctly, after it restarts it goes strait into windows setup. This happens every time I try restarting, but I can get back into vista by putting the hard drive to boot first. In vista I can see the other partition where XP was installed, and inside is just a folder titled WINDOWS and it seems like all the windows files are in there
View 5 Replies View RelatedI'm having problems dual booting XP with Vista. My first problem is that I can't see the space I create from when I shrink the volume on the XP install screen. I have 2 HDs, both over the 137 GB limit (or whatever it is) so I assume it may be related to that. Also the main HD has a separate partition for Vista.
I don't really use the one HD so I was going to just install XP on that and be done with it. Well when I went to do that, it said that it couldn't recognize the formatting on the C drive or it may be damaged and would need to reformat it to continue. I canceled out of it and then my pc wouldn't boot. I had to put the Vista cd in to repair it
I'm thinking about unplugging the C drive and then trying again. Or would that cause problems when I plugged it back in?
I loaded a second disk drive with Vista Beta 2 and have XP on another drive.Problem is I don't see Vista as an option to boot from? What is the name of the file(s) I have to edit to get this to work?
View 1 Replies View RelatedI had vista and xp in dual boot and decided i was going to delete the vista partition, well apon restarting my comp,i get a real quick Invalid boot something or other, cant read all of it before it disapers, and then nothing, it wont boot into xp.i have done a fixboot and i did a bootcfg/rebuild and still nothing
View 14 Replies View RelatedI wish to set up a dual boot arrangement using :existing 300GB HDD and new 1000GB HDD
existing Win XP pro and new Win Vista existing Wireless Broadband and new ADSL2+ without physically changing plugs on the internet and allowing access to the alternate HDD from each selected boot. Also is there an online training facility where I can learn more about programming system modules and changing startup files and defaults. I did do a Microsoft course years ago on NT4 but my notes and memory have gone astray
I had partitioned my HD to run XP (pro sp3) and Vista. Not liking vista, I deleted it and merged the two partitions into one, XP. Now when I boot I still get the option to boot to vista or an earlier OS. There is only one OS so I thought that would just be gone. Its not. How do I get rid of that screen at start so it just boots into xp, I'm being careful because I tried to reverse them when I partitioned it and ended up with a real jumbo
View 2 Replies View Relatedim not sure if the way round iv done things was stupid or not, I have my machine, with XPPro installed on, bought another H/D and installed vista 64 on it, however i installed vista with the xo drive unplugged, and i cant work out how to get an OS choice on boot
View 6 Replies View RelatedProblem: I am unable to connect to the internet.I have a new build dual boot system with Vista x64 SP 1 Home Premium on C: drive Seagate 120G 7200, XP Home Edition SP 2 on E: drive Seagate 160G 7200. A third Seagate 500G is for games, etc. Vista was installed first and the internet connection works. XP works well except I cannot make an internet connection. I have a Linksys WRB54G router which takes its internet connection from my cable company's modem. I have 4 ethernet connection points: 1 goes to a desktop, another goes to a notebook, the third goes to the computer in question and the fourth is unused. This router also has wireless capability. My build chassis is a Thermaltake "Kandalf" LCS, 1000W CoolerMaster, XFX 790i Ultra MB, Core2 Duo E8500 at 3.16 GHz, 4gig Corsair DDR3 in two 2gig sticks, two XFX 9800GX2 in quad SLI, a cd/dvd drive, and a floppy, kb, and mouse. Motherboard has two ethernet ports, one in use (Vista).I am not familiar enough with networking to know how to proceed. The Connection Wizard is no help, 'specially since I don't know what I am doing.
View 4 Replies View RelatedA couple days ago, I was running Vista and XP on two seperate hard drives on my desktop. I have since deicded to use the Vista hard drive for data storage and have removed it from my desktop.However,whenever I boot up my desktop, my computer still goes to the black windows uploader screen and askes me to choose and "Earlier version of windows" (the XP) or my non-existant Vista.
View 2 Replies View RelatedI installed XP x64 (Yes, I know, that was a mistake) on my machine a while ago and was tired of having to put up with all the incompatibility issues that had been arising, whether it was not having iTunes work properly to even some of my favorite software just not loading and prompting me with error messages.
View 4 Replies View RelatedI'm going to build a new computer. It will have a new 500 GB Seagate 7200.11 32 MB cache. I want to reuse my current 500 GB Samsung Spinpoint 7200 RPM 16 MB cache, which is currently used only for backup storage. What's the best way to have both XP and Vista on the new computer (which is also possible to do)?Vista on the new Seagate; XP on the the old Samsung (will all my files be wiped out during the installation?)The reverse of the above XP on 100GB partition on the new Seagate; Vista on the remaining 400GB; use the old Samsung as I have been all this time. XP will only be used to run Internet Explorer 6 and minimal web design tools.
View 1 Replies View RelatedI will be formatting my drive now and I want to install XP and Vista so that I can choose which one to load at the start of booting up. How would I do this? Do I need to create two partitions, install both operating systems on the separate drives and then done? Or is there more to it? Which operating system should I install first, if there is any difference
View 1 Replies View Relatedi have xp, and i have a vista disc, i was wondering if i could dual boot with vista so i don't have to format my hd when loading vista as i don't want to lose all my applications.
View 7 Replies View RelatedI have been trying to dual boot my 2 operating systems which are on 2 separate sata drives for some time. I have read around and can't find a solutions that seems like it should or would work for me. I have 3 hard drives 2 sata and 1 ide, the ide just has music mp3's. I used to dual boot my 2 XP operating systems just fine by changing the boot.ini but I can't find the correct way to choose the numbers with my new Vista installation
View 4 Replies View RelatedI have a four year old eMachines that has expired and isn't worth repairing. I would like to use the OEM Windows XP Home restore disc from this computer to dual-boot my Vista machine (HP Pavilion a1730n). Is this:
1. possible?
2. ethical?
I want to do this because I can't use many of my programs on the Vista machine. If I can dual-boot the eMachines restore disc I can use Windows Home until vendors catch up with Vista.
I had Windows Vista in my laptop. I thought of going for XP/Vista Dual Boot. I took XP CD and booted from it and installed XP in my D Drive (Vista was in C Drive). Later on I didn't see XP/Vista Dual Boot option so I modified boot.ini file and though I am able to see Vista option now but still Vista fails to boot. XP is booting fine.
View 2 Replies View RelatedI currently have XP on the first partition, and I later added Vista on another partition as a dual boot.For various reasons, I need to reinstall XP. That involves formatting the first partition and installing a clean XP.It just occurred to me that doing that might mess up the dual boot functionality.Should I be concerned, and if so, what can I do to avoid the problem?
View 4 Replies View RelatedMy computer has two physical drives with dual boot, Primary Physical drive having XP prof and Secondary physical drive having two partitions, one has Windows Vista Basic and the other partition for back up files and data. Everything was fine till I went for a reinstall of XP prof on the primary physical drive. After the XP prof reinstall I was not able to access the secondary physical drive, when I go in from the windows explorer, I can see the drive which used to have windows Vista partiton and I get a warning message that the drive needs to be formatted.
View 4 Replies View RelatedI really didnt want to harm my computer or have all my files deleted so after spending hours googling it, I thought I'd make my own thread and ask here.My cousin basically gave me my laptop, 40gb hard drive and dual booting windows xp and windows vista.I've never ever used xp and always use vista, but recently I noticed that I'm running out of diskspace. After a lot of research I realised it was my windows folder that was taking up 50% of my drive!
View 3 Replies View RelatedI´d like to use Windows Vista right now and keep Windows XP for gaming.
View 8 Replies View RelatedI have 2 internal SATA disks and one external USB 2.0 drive. I had XP SP 2 running just fine, but I decided to give Vista RTM a try, so I installed Vista RTM on the first SATA drive (receated the partition).All drives have NTFS file systems.Since Nvidia does not have a decent Vista driver yet, I decided to do a XP installation on the 2nd SATA drive, just for when I want to play a game. And here is my problem:When booting of the XP SP2 CD, I can only see the USB drive available for the install, all the SATA drives are shown as "Unknown Disk" (No disk present).
View 5 Replies View RelatedI want to dual-boot this machine with Windows XP, and the reason is: Vista is making Halo:Combat Evolved (my favorite online game) very slow at 20fps. This may be nVidia's fault, but people who use XP and have the same (or closely similar) hardware and drivers as me don't have this problem. I have 50GB of free hard drive space. Windows Vista is my current OS. I love Halo so much I am willing to drop some more cash into my computer to dual boot with Vista and XP so I can play it s'more.
View 1 Replies View RelatedI have a new laptop that came with Windows Vista. I have been trying to load it with Windows XP because Windows Vista didnt work. I am pretty sure a format and clean install will wreck my warranty, hence the dual boot. So far, I have been able to partition and install XP SP-2 to a partition. I've booted into XP fine but my Vista partition is not available. I think that the partition table or MBR has been corrupted.
So to repair this, what I did was boot up from the Vista recovery DVD and run the 'startup repair' option to reload the bootloader for Vista and thus, enable dual booting. When I rebooted I got a black screen saying 'Invalid Partition Table' or something to this effect. I tried repairing the MBR and so on and so forth from the console on the recovery DVD but this proved to be pretty much totally fruitless. So I went through and did an install of Windows XP once again, to my other drive partition I had created. So I am basically where I started.
I recently partitioned my hard drive using Symantec Partition Magic. I installed Vista Ultimate on a separate partition. After installing, I would reboot and the normal dual boot menu would come up every time i booted my computer. But after realizing that I didn't like vista, I deleted the partition. I did not uninstall Vista, I just deleted the partition. Than I applied the newly unallocated space to the rest of my harddrive. But now when I boot, I still get the dual boot option. It tells me to pick Vista or an "Earlier Version of Windows".
View 8 Replies View Related